> This may be too low, 1152x768 @ 60 Hz is 52 kHz here.
absolutely right!
this works:
Section "Monitor"
Identifier "Tibook panel"
HorizSync 30-100
VertRefresh 55-160
Option "DPMS"
Modeline"1152x768" 78.741 1152 1173 1269 14
On Sat, Jan 18, 2003 at 05:23:14PM +0100, Claas Langbehn wrote:
> The "Seagate Barracuda V" shall be amazingly quiet.
>
i only can speak about barracuda IV. they are. even after half a year it
was hardly audible. then it went up in smoke - doesn't seem to happen
too often, though.
one thing to not
On Sam, 2003-01-18 at 18:40, benjamin lämmle wrote:
> i searched the web and the mailing list for a couple of days now and did not
> find any answer.
> i have a powerbook wallstreet 233, and the mouse button emulation for X does
> not work.
> /proc/sys/dev/mac_hid/mouse_button2_keycode is 88 fo
On Son, 2003-01-19 at 00:43, Matthew Yee-King wrote:
> I still have a problem though - my display is now stuck at 1024x768.
> How can i make it display at 1152x768? the console is at 1152x768 but
> it goes to 1024x768 when i startx. I think i have the correct lines in
> XF86Config-4: e.g.
>
>
cheers everyone. glxgears now at 330+ fps . bring it on! i can finally regain
some pride in bzflag :)
All i had to do in the end was compile r128 DRM as a kernel module and get a
decent XF86Config-4 file.
I still have a problem though - my display is now stuck at 1024x768. How can i
make it d
On Sat, 2003-01-18 at 09:23, Claas Langbehn wrote:
> The "Seagate Barracuda V" shall be amazingly quiet.
I second that. I have extensive experience (I own a Web-based PC shop
for 2.5 years) with IBM, Western Digital, and Seagate (7200 rpm IDE),
and Seagate is typically quieter out of the box and
Thanks for the many very helpful replies!
I will keep you updated on my progress. It will take a little time,
as I am on a slow internet connection for the weekend.
Etienne
--
Etienne M. Gagnon[EMAIL PROTECTED]
SableVM:
For X, you may want to install xserver-xfree86-dri-trunk,
xlibmesa3-dri-trunk and drm-trunk-module-src (note that apparently you
need to build the DRM with gcc-2.95 if you want to use the DRI) from
deb http://people.debian.org/~daenzer/dri-trunk/./
/usr/share/doc/xserver-xfree86-
On Sam, 2003-01-18 at 21:46, Matthew Yee-King wrote:
> I reconfigured xfree and chose the fbdev xserver driver.
The fbdev driver doesn't even provide 2D acceleration, much less 3D.
> I tried choosing the r128 driver from the dpkg xserver menu instead of
> fbdev but x fails to start (i believe it
Hello Debianusers,
Have anyone success in using his ibook2 with radeon
ati graphics card to make presentations under Linux?
# lspci
00:10.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M6 LY
# uname -a
Linux smooth 2.4.20-ben1 #5 Sam Jan 11 15:05:11 CET 2003 ppc unknown
unknown
I'm remembering more and more. :) Yes -- you need to have ati (r128)
you can compile it in, or just modprobe it (if you've allowed for
that). Another key is that to get acceleration (3d accel that is) I
had to NOT use agpgart. I read a lot that I needed it -- but I needed
to remove it for it
cheers for the tips. I reconfigured xfree and chose the fbdev xserver driver. I
still only got 150 ish fps from glxgears. glxinfo says
...snip...
direct rendering: No
...snip...
I have read that i need this to be enabled for acceleration to take place. How
can i enable it? I tried choosing the
Check this link:
http://cattlegrid.net/~christophe/titanium/
hope it helps
cheers
matthew
Etienne M. Gagnon wrote:
Yes, it's a nice machine ;-) and I got it specifically to install
Debian on it, which I did, but I now need some help getting a few
things to work (e.g. X, AirPort, ...). I would definitely appreciate
Look at http://users.linpro.no/janl/tibook.html. Mine started out a
Hi all,
Yes, it's a nice machine ;-) and I got it specifically to install
Debian on it, which I did, but I now need some help getting a few
things to work (e.g. X, AirPort, ...). I would definitely appreciate
any help some of you could provide me. (In return, I will be able to
do a better job as
On Sat, Jan 18, 2003 at 12:29:53PM +1100, Anton Blanchard wrote:
:On my machines it will try and tftp from the bootp server address. If it
:doesnt respond then it falls back to the broadcast address. Ive never
:tried using next-server, although you might have some luck with:
:
:ibm,fw-clientipaddr
hello
i searched the web and the mailing list for a couple of days now and did not
find any answer.
i have a powerbook wallstreet 233, and the mouse button emulation for X does
not work.
/proc/sys/dev/mac_hid/mouse_button2_keycode is 88 for F12
/proc/sys/dev/mac_hid/mouse_button3_keycode is 87 fo
How are you going to connect your iBook with your TV.
On my iBook I gave only the standard VGA output, or digital
video output for monitors, no SVGA or composite which I could
use with my TV.
Best regards,
I.
On Sat, Jan 18, 2003 at 04:03:15PM +0100, Roland Wegmann wrote:
> Hello
>
> I have i
hi,
Does anybody know a programm that can schedule startups on ibook hardware?
this works with mac os 9, in mac os x that feature is missing.
the problem is, if i you schedule a startup with mac os 9, you shoudn´t boot
an other system
before the date of scheduled startup because then the ibook sim
On Sam, 2003-01-18 at 16:18, Matthew Yee-King wrote:
>
> I am trying to play a game that uses opengl or mesa.
> http://www.reptilelabour.com/software/chromium/
BTW, there's a Debian package called chromium for this.
--
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
X
ahh -- there are more detailed messages about what I had to do to get
opengl working on my ibook (with a rage128) but basically, I had to set
my colors to 16bit rather than 24 bit... that was the deciding factor.
If you have a rage128 you DON'T need dri-trunk or anything like that,
and honest
On Fre, 2003-01-17 at 22:46, Clemens Mangler wrote:
> On Thu, 16 Jan 2003, David [iso-8859-1] Röhr wrote:
>
> > On Thu, 16 Jan 2003 [11:52],
> > Clemens Mangler ([EMAIL PROTECTED]) wrote:
> >
> > > thanks for your replay!
> > >
> > > kernel: 2.4.20-ben1; gcc (GCC) 3.2.2 20030109
> >
> > Try to
I Know there is one from Seagate which is specially designed for silence. Must
be hardly possible to tell if its spinning or not.
Can't remember the model name though.
think it was 80 GB.
greets Benny
On Saturday 18 January 2003 16:03, Roland Wegmann wrote:
> Hello
>
> I have in mind to buy a
Hello
I am trying to play a game that uses opengl or mesa.
http://www.reptilelabour.com/software/chromium/
The graphics performance on my machine (tibook 400) is too slow to play it. I'm
a bit confused by what exactly libmesa, dri trunk, framebuffer etc are. Can
anyone suggest how i can impro
Hello
I have in mind to buy a new harddrive (100-120GB). On this Harddrive I
will store all my private videos and sound. Further I will connect this
Harddrive (in an external firewire case) with my hi-fi unit or my TV set
via my iBook (playing sound or movies) and therefore the harddisk should
be
On Sat, Jan 18, 2003 at 06:52:56AM -0700, Marvin Germain wrote:
> and then go black. I believe there is a 2.4 kernel on the Debian CD. Maybe
Yes, the new-powermac folder contains a 2.4 kernel. To install
successfully (so the modules match the kernel), use the root.bin
from the same folder. Th
Hi, Vince. I have debian on my powerbase 180, so there should be no problem
in principle for you. BTW I use BootX to launch linux. I think your problem
may be the Compaq monitor. I have also installed debian on a Compaq deskpro,
and had to switch monitors even to do the installation. I use
On Sat, Jan 18, 2003 at 10:47:23AM +0100, Ole-Egil Hvitmyren wrote:
> Sven Luther wrote:
>
> >On Fri, Jan 17, 2003 at 05:23:32PM -0500, Allan Streib wrote:
> >
> >
> >>On Fri, 17 Jan 2003, David Zhou wrote:
> >>
> >>
> >>
> >>>Pine is perfectly alright in that it's pretty easy to use. It's no
Sven Luther wrote:
On Fri, Jan 17, 2003 at 05:23:32PM -0500, Allan Streib wrote:
On Fri, 17 Jan 2003, David Zhou wrote:
Pine is perfectly alright in that it's pretty easy to use. It's not
free, but then again, the question didn't have free as a requirement.
Pine is free as in
On Sat, Jan 18, 2003 at 09:19:19 +0100, Jérôme Marant wrote:
> This has nothing to do with Gnus itself. You can configure the way
> you quote messages, and that's it. If people do not respect such
> way of quoting, just tell them.
But I noticed that many Gnus users don't use the standard quote
pre
On Fri, Jan 17, 2003 at 05:23:32PM -0500, Allan Streib wrote:
> On Fri, 17 Jan 2003, David Zhou wrote:
>
> > Pine is perfectly alright in that it's pretty easy to use. It's not
> > free, but then again, the question didn't have free as a requirement.
>
> Pine is free as in no cost. But it's not
Vincent Lefevre <[EMAIL PROTECTED]> writes:
> On Fri, Jan 17, 2003 at 22:38:12 +0100, Jérôme Marant wrote:
>> Would you please stop being stupid and prove what you tell before
>> spreading FUD?
>
> *You* are stupid. You can't tell what I receive from this mailer.
> Here's an example (with all let
> just curious, but
>
> is there a vi friendly (or oriented) mailer out there ?
> have been a debianppc newbie for years @ iBook-Tangerine
> and wanna keep this machine promt-mode only
Three choices:
mail, mailx, Mail - send and receive mail
Well, there you go dude! You'll need a "promt-mo
33 matches
Mail list logo
