On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
wrote:
> Hi,
>
> today I tried to get burning working with my new Powerbook 15". Has
> anyone of you already burnt successfully with the PBook?
Succes here as well with CD burning on an AlBook 17" (now without SCSI
emu
On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
wrote:
> today I tried to get burning working with my new Powerbook 15". Has
> anyone of you already burnt successfully with the PBook?
Sure, with both SCSI emu and even IDE burning with 2.60/2.6.1-ben1, I got
it working
- enabling the thermal driver for ibook g4 makes the kernel freeze at boot,
just after the 'i2c /dev entries driver'
- sleep does not work
- there are problem updating yaboot config. ybin does not complain, but
when I reboot, the machine freeze with a white screen between the first
and second st
Il dom, 2004-01-11 alle 17:28, Elimar Riesebieter ha scritto:
> OS X installed?
yes
Ciao
Alessandro
>
> Ciao
>
> Elimar
Hi,
Luis Sanjuan a écrit :
On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
wrote:
Hi,
today I tried to get burning working with my new Powerbook 15". Has
anyone of you already burnt successfully with the PBook?
Succes here as well with CD burning on an AlBook 1
On Sun, Jan 11, 2004 at 09:47:26PM +0100, Francisco J. F. Serrador wrote:
> Check that radeonfb is compiled inside the kernel, not as module, and
> that you boot with append="video=radeonfb" in the kernel.
I am experiencing other problems with the radeonfb and 2.6 on my TiBook
IV, maybe somebody r
On Sun, 11 Jan 2004 the mental interface of
[EMAIL PROTECTED] told:
> Hi,
>
[...]
> The docuumentation of cdrecord says the syntax is :
> dev=ATAPI:bus,target,lun
>
> So, now, how to find the good device ?
>
> For example :
>
> cdrecord -scanbus -dev=ATAPI give :
>
> alube:/home/eric# c
Alessandro Riz -ml wrote:
Il dom, 2004-01-11 alle 17:28, Elimar Riesebieter ha scritto:
OS X installed?
yes
Ciao
Alessandro
Ciao
Elimar
As I already told you in private:
The machine definetly has to load the open firmware, as far as i know.
Are you sure you re pressing the cmd-alt-o-
[...]
> > DVD burning not tested.
> >
>
> For DVD burning, you'll have to download the powerpc version of
> cdreocrd-dvd-pro, called, if I'm not wrong,
> "cdrecord-prodvd-2.0-powerpc-unknown-linux-gnu" on the cdrecord ftp
> site. (free for personnal use)
>
> I think You'll have to ask a key.
On Sun, 11 Jan 2004 the mental interface of
Alessandro Riz -ml told:
> Hi,
> Yesterday I buy a powerbook g4 12" and now I wold like to install
> debian sid. I found some article on internet but I've a
> problem... When I press at the start apple+alt+o+f it don't
> start Open Firmware... W
Il dom, 2004-01-11 alle 19:17, Barry Hawkins ha scritto:
> Immediately after the chime, press the keys that you have mentioned,
> and continue to hold them until your OpenFirmware prompt appears.
Thanks this is the problem!
I'm not continue to hold them...
Regards
Alessandro
Lectoribus Salutem,
On the 24th of this month, the Oracle from Redwood will certainly
announce the G5 PowerBook.
As a 64-bit, big-endian architecture is a boon to compiler writers
(because it will point out lots of mistakes, especially in C programs),
I want to switch as soon as possible (AT
Hi,
I'm trying to install debian ppc from internet, at home I've an adsl
connection (I use pppoe), but I've a dynamic ip, during the installation
it tell me to configure the network but what ip should I use?
If I leave it blank it doesn't connect to internet!
Somebody has already try to do this?
Well, let me first thank you guys. I have been struggling installing
debian on a 12.1" ibook with firewire 400 and usb2.0
Problems encountered and solved so far
Problem: Debian install discs would not boot (I read that you guys have
a new cd, but the link I looked at was broken)
Solution: Cre
On Sun, Jan 11, 2004 at 03:30:07PM +0100, [EMAIL PROTECTED] wrote:
> Hi,
>
> Luis Sanjuan a écrit :
> >On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland
> >wrote:
> >
> >>Hi,
> >>
> >> today I tried to get burning working with my new Powerbook 15". Has
> >>anyone of you a
On Mon, 2004-01-12 at 03:45, Sylvain Joyeux wrote:
> - enabling the thermal driver for ibook g4 makes the kernel freeze at boot,
> just after the 'i2c /dev entries driver'
I'll have a look.
> - sleep does not work
It's known not to work on iBook G4s. It may work some day when ATI
provides me wi
On Jan 11, 2004, at 8:27 AM, Alessandro Riz -ml wrote:
Hi,
Yesterday I buy a powerbook g4 12" and now I wold like to install
debian sid.
I found some article on internet but I've a problem...
When I press at the start apple+alt+o+f it don't start Open Firmware...
What should I do to enter in it
On 7 Jan, this message from Brad Boyer echoed through cyberspace:
> [snip] A note of warning, tho. I'm not sure exactly
> what does it, but on my 7600 most of the PRAM and OF settings get
> changed back to what the MacOS wants during the boot process. This
> means you have to reapply patches and
On Sun, 2004-01-11 at 21:53, Paul van Tilburg wrote:
>
> I am experiencing other problems with the radeonfb and 2.6 on my TiBook
> IV, maybe somebody recognizes it. When I boot I get the fb, boot
> messages etc. and the gdm. But when I switch to console, my screen
> becomes blank (backlight stays
Hi,
Yesterday I buy a powerbook g4 12" and now I wold like to install
debian sid.
I found some article on internet but I've a problem...
When I press at the start apple+alt+o+f it don't start Open Firmware...
What should I do to enter in it?
Thanks
Alessandro
--
Legge di Parker La bellezza e' so
I had the same problem.
Check that radeonfb is compiled inside the kernel, not as module, and
that you boot with append="video=radeonfb" in the kernel.
The chipid is 0x514d
El sáb, 10-01-2004 a las 12:59, Michel Dänzer escribió:
> On Fri, 2004-01-09 at 19:18, Manuel García Urreta wrote:
> >
> >
Alessandro Riz wrote:
Hi,
I'm trying to install debian ppc from internet, at home I've an adsl
connection (I use pppoe), but I've a dynamic ip, during the installation
it tell me to configure the network but what ip should I use?
If I leave it blank it doesn't connect to internet!
Somebody has a
22 matches
Mail list logo