I have a few questions... I usually run debian on PC but now i've had a
very tempting offer to buy a PowerBook G4. What I would like to know is:
1. Will debian work fine with this computer?
2. Does apt-get work with mac or do you have to compile all programs
yourself?
3. This computer onl
Hi,
Yesterday I buy a powerbook g4 12" and now I wold like to install
debian sid.
I found some article on internet but I've a problem...
When I press at the start apple+alt+o+f it don't start Open Firmware...
What should I do to enter in it?
Thanks
Alessandro
--
Legge di Parke
Has anyone figured out how to put a powerbook g4 to sleep when closing
the cover so you do not have to reboot anytime you close the cover for
more than a minute or two?
Thanks,
-Chris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Cont
Hi!
Finally I came around to install debian on my PowerBook G4. Now, I have
some questions concerning Xfree86.
1) The Radeon Issue.
I found some information about people who got Xfree running with
the radeon driver, not only with fbdev (Its working with FBDev,
but KDE3
On Thu, 2002-01-03 at 18:28, Tomasz Matuszczyk wrote:
> I have a few questions... I usually run debian on PC but now i've had a
> very tempting offer to buy a PowerBook G4.
A new one or an old one? I'll assume the former; they're much more
powerful but not quite as well sup
On Thu, Jan 03, 2002 at 06:46:22PM +0100, Michel Dänzer wrote:
> >
> > 1. Will debian work fine with this computer?
>
> Yes! Probably harder to set up than an x86 box, but the result is much
> nicer. :) Hardware support is also developing nicely except for the
> Winmodem-style internal modem.
T
computer on my note i got is the
following:
PowerBook G4 667 Mhz/512MB/30GB/DVD
Regards
Tomasz
On Thu, 2002-01-03 at 18:46, Michel Dänzer wrote:
> On Thu, 2002-01-03 at 18:28, Tomasz Matuszczyk wrote:
> > I have a few questions... I usually run debian on PC but now i've had a
> >
On Thu, Jan 03, 2002 at 06:50:11PM +0100, Tomasz Matuszczyk wrote:
>
> PowerBook G4 667 Mhz/512MB/30GB/DVD
If it's over 500 MHz, it's the new model.
Oh BTW, could you fix the quoting in your mailreader? What it appears
to do at the moment is just quote the whole original messa
On Thu, 2002-01-03 at 18:58, jtv wrote:
> > PowerBook G4 667 Mhz/512MB/30GB/DVD
>
> If it's over 500 MHz, it's the new model.
Ok good to know :)
> Oh BTW, could you fix the quoting in your mailreader? What it appears
> to do at the moment is just quote the whole orig
On Thu, Jan 03, 2002 at 06:56:28PM +0100, Tomasz Matuszczyk wrote:
> >
> > If it's over 500 MHz, it's the new model.
> Ok good to know :)
Not that the old model isn't nice, though. :)
> Well i thought it would be better to just write a quick reply on top of
> the message since i didn't have a
On Thu, 2002-01-03 at 18:50, Tomasz Matuszczyk wrote:
> How much better do you think the hardwaresupport will be in the
> beginning of march? (thats when ill get it if i buy it)
By then it will be perfect. ;) Seriously, XFree86 4.2.0 will be out
which offers very decent support for the graphics c
Michel Dänzer <[EMAIL PROTECTED]> writes:
> The trackpad has only one button. You can emulate the others with keys,
> but do yourself a favour and use a decent USB mouse. :)
As I should be getting my powerbook in the next week or two, what kind
of decent usb mouse would you recommend ? I'd like s
On Thu, 2002-01-03 at 19:28, Wayne Pascoe wrote:
> Michel Dänzer <[EMAIL PROTECTED]> writes:
>
> > The trackpad has only one button. You can emulate the others with keys,
> > but do yourself a favour and use a decent USB mouse. :)
>
> As I should be getting my powerbook in the next week or two, w
On Thu, Jan 03, 2002 at 07:22:44PM +0100, Michel Dänzer wrote:
> By then it will be perfect. ;) Seriously, XFree86 4.2.0 will be out
> which offers very decent support for the graphics chip. The rest of the
As it stands, it's pretty darn fast with just the framebuffer driver -
unless I try to run
Michel Dänzer <[EMAIL PROTECTED]> writes:
> > I'd like something that will work with OSX as well.
>
> All USB mice are basically the same as far as the OS is concerned. Maybe
> some exotic features don't work with all OSs but basically they should
> all work.
So things like the microsoft Infra r
Hi,
On Thursday, January 3, 2002, at 10:36 AM, Wayne Pascoe wrote:
All USB mice are basically the same as far as the OS is concerned.
Maybe
some exotic features don't work with all OSs but basically they should
all work.
So things like the microsoft Infra red mice should work then ?
The M
On Thu, 2002-01-03 at 19:35, Mark Brown wrote:
> On Thu, Jan 03, 2002 at 07:22:44PM +0100, Michel Dänzer wrote:
>
> > By then it will be perfect. ;) Seriously, XFree86 4.2.0 will be out
> > which offers very decent support for the graphics chip. The rest of the
>
> As it stands, it's pretty darn
On Jan 03 2002, Wayne Pascoe wrote:
> As I should be getting my powerbook in the next week or two, what
> kind of decent usb mouse would you recommend ? I'd like something
> that will work with OSX as well.
Humm... Wouldn't the extra mouse consume more energy and
shorten the lifeti
On Jan 03 2002, jtv wrote:
> On Thu, Jan 03, 2002 at 06:56:28PM +0100, Tomasz Matuszczyk wrote:
> > >
> > > If it's over 500 MHz, it's the new model.
> > Ok good to know :)
>
> Not that the old model isn't nice, though. :)
As far as I read, the newer model uses a different processor
Well, the above paragraphs assume that the pb *has* f11 and
f12 buttons and that other people also care for extended
battery life, but I've never touched an apple notebook with
which I could play for more than 1 hour. :-)
I can't speak to the battery impact of an
On Fri, 2002-01-04 at 00:18, Rogério Brito wrote:
> On Jan 03 2002, jtv wrote:
> > On Thu, Jan 03, 2002 at 06:56:28PM +0100, Tomasz Matuszczyk wrote:
> > > >
> > > > If it's over 500 MHz, it's the new model.
> > > Ok good to know :)
> >
> > Not that the old model isn't nice, though. :)
>
>
On 4 Jan 2002, Michel Dänzer wrote:
(...)
> > And can anybody help with some questions that I have regarding
> > the new iBooks? Are the 600MHz ones sufficient to play DVDs
> > under Debian (say, with xine or vlc)? I've read that both
> > programs currently work with altivec, but i
On Fri, 2002-01-04 at 03:35, Siggi Langauf wrote:
> On 4 Jan 2002, Michel Dänzer wrote:
>
> (...)
> > > And can anybody help with some questions that I have regarding
> > > the new iBooks? Are the 600MHz ones sufficient to play DVDs
> > > under Debian (say, with xine or vlc)? I've read that
Hey,
On 4 Jan 2002, Michel Dänzer wrote:
> On Fri, 2002-01-04 at 03:35, Siggi Langauf wrote:
> > On 4 Jan 2002, Michel Dänzer wrote:
> >
> > (...)
> > > > And can anybody help with some questions that I have regarding
> > > > the new iBooks? Are the 600MHz ones sufficient to play
On Thu, Jan 03, 2002 at 11:14:18PM +0100, Michel Dänzer wrote:
> On Thu, 2002-01-03 at 19:35, Mark Brown wrote:
> > As it stands, it's pretty darn fast with just the framebuffer driver -
> > unless I try to run something that uses OpenGL I have completely failed
> > to notice that it's unaccelerat
On Thu, Jan 03, 2002 at 07:34:34PM +0100, Michel Dänzer wrote:
> > As I should be getting my powerbook in the next week or two, what kind
> > of decent usb mouse would you recommend ?
>
> The one that suits your needs best.
I personally find the Logitech Cordless TrackMan very nice for use in
con
r 100 mA at 5 volts, which works out to about 1/2 watt. I've used USB
mice with the iBook I've been using, and they don't seem to make a
noticable dent in its typical ~4-hour charge life. So, I'd say that it
won't be particularly visible on the PowerBook G4 either - you alrea
On Fri, 2002-01-04 at 04:17, P Prince wrote:
> Hey,
>
> On 4 Jan 2002, Michel Dänzer wrote:
>
> > On Fri, 2002-01-04 at 03:35, Siggi Langauf wrote:
> > > On 4 Jan 2002, Michel Dänzer wrote:
> > >
> > > (...)
> > > > > And can anybody help with some questions that I have regarding
> > > > >
On Fri, 2002-01-04 at 00:07, Rogério Brito wrote:
> On Jan 03 2002, Wayne Pascoe wrote:
> > As I should be getting my powerbook in the next week or two, what
> > kind of decent usb mouse would you recommend ? I'd like something
> > that will work with OSX as well.
>
> Humm... Wouldn't the ex
On 3 Jan, this message from Michel Dänzer echoed through cyberspace:
>> > By then it will be perfect. ;) Seriously, XFree86 4.2.0 will be out
>> > which offers very decent support for the graphics chip. The rest of the
>>
>> As it stands, it's pretty darn fast with just the framebuffer driver -
Hey,
On 4 Jan 2002, Michel Dänzer wrote:
> On Fri, 2002-01-04 at 04:17, P Prince wrote:
> > Hey,
> >
> > On 4 Jan 2002, Michel Dänzer wrote:
> >
> > > On Fri, 2002-01-04 at 03:35, Siggi Langauf wrote:
> > > > On 4 Jan 2002, Michel Dänzer wrote:
> > > >
> > > > (...)
> > > > > > And can anybod
On Sat, 2002-01-05 at 04:00, P Prince wrote:
>
> On 4 Jan 2002, Michel Dänzer wrote:
>
> > On Fri, 2002-01-04 at 04:17, P Prince wrote:
> > >
> > > On 4 Jan 2002, Michel Dänzer wrote:
> > >
> > > > On Fri, 2002-01-04 at 03:35, Siggi Langauf wrote:
> > > > > On 4 Jan 2002, Michel Dänzer wrote:
> >
On Fri, Jan 04, 2002 at 11:24:04AM +0100, Tomasz Matuszczyk wrote:
> On Fri, 2002-01-04 at 00:07, Rogério Brito wrote:
> >
> > Besides, I actually like tapping the trackpad as a substitute
> > for clicking (which I'm also assuming is possible with the pbs
> > and ibooks).
>
> I don't
On Fri, 2002-01-04 at 23:13, Michel Lanners wrote:
> On 3 Jan, this message from Michel Dänzer echoed through cyberspace:
>
> >> > hardware will also hopefully be supported in the mainline kernel by
> >> > then, and if not it will certainly be in the PPC specific kernels.
> >>
> >> Aside from t
On 7 Jan, this message from Michel Dänzer echoed through cyberspace:
> On Fri, 2002-01-04 at 23:13, Michel Lanners wrote:
>> On 3 Jan, this message from Michel Dänzer echoed through cyberspace:
>> > Absolutely. When I'll become the proud owner of such a machine at last,
>> > I won't be able to
On Mon, 2002-01-07 at 20:05, Michel Lanners wrote:
> On 7 Jan, this message from Michel Dänzer echoed through cyberspace:
> > On Fri, 2002-01-04 at 23:13, Michel Lanners wrote:
> >> On 3 Jan, this message from Michel Dänzer echoed through cyberspace:
> >> > Absolutely. When I'll become the prou
can somebody help me to setup if possibel in german
Hi !
What do you think of Apple Powerbook G4 667 ?
I'm very interesting to by this, and i would like to know if install debian on
it is easy. Can i use TiBook 3 's or ibook's install documentation to install
debian on this machine ?
Thank you for yours answer
Hello,
I am new to this port; please be gentle.
I just got my new shining pbook 15", installed sarge on it using pre-rc2
debian installer, and most of the things worked just fine out of box,
which impressed me a lot. Great work!
However there are few things that don't work for me.
1. Sleep.
Il dom, 2004-01-11 alle 17:28, Elimar Riesebieter ha scritto:
> OS X installed?
yes
Ciao
Alessandro
>
> Ciao
>
> Elimar
Alessandro Riz -ml wrote:
Il dom, 2004-01-11 alle 17:28, Elimar Riesebieter ha scritto:
OS X installed?
yes
Ciao
Alessandro
Ciao
Elimar
As I already told you in private:
The machine definetly has to load the open firmware, as far as i know.
Are you sure you re pressing the cmd-alt-o-
On Sun, 11 Jan 2004 the mental interface of
Alessandro Riz -ml told:
> Hi,
> Yesterday I buy a powerbook g4 12" and now I wold like to install
> debian sid. I found some article on internet but I've a
> problem... When I press at the start apple+alt+o+f it don
Il dom, 2004-01-11 alle 19:17, Barry Hawkins ha scritto:
> Immediately after the chime, press the keys that you have mentioned,
> and continue to hold them until your OpenFirmware prompt appears.
Thanks this is the problem!
I'm not continue to hold them...
Regards
Alessandro
On Jan 11, 2004, at 8:27 AM, Alessandro Riz -ml wrote:
Hi,
Yesterday I buy a powerbook g4 12" and now I wold like to install
debian sid.
I found some article on internet but I've a problem...
When I press at the start apple+alt+o+f it don't start Open Firmware...
What should I
Does an Howto Debian install exist for new Alu Powerbook 1,33 ?
I search people whitch have experiences whith debian on this machine.
thanks,
Pascal
Good morning. I recently acquired a PowerBook G4 12" and I was thinking
about installing Debian. I have had some experience running other flavours
of Linux on the x86 platform. I have been doing some research however since
the hardware that I am using is fairly old, I have not been able to
Hi all,
I have one question about the behaviour of the battery on my powerbook G4:
When the battery is full, and the electricity cable is still plug-in, does
this damage the battery ? I heard that when the battery full is, you have to
unplug the cable and wait before plug-in, till the battery
Ciao Christopher Molnar, nel tuo messaggio dicevi:
> Has anyone figured out how to put a powerbook g4 to sleep when closing
> the cover so you do not have to reboot anytime you close the cover for
> more than a minute or two?
Since the PBG4 has a nVidia graphic chip it will not sle
OoO La nuit ayant déjà recouvert d'encre ce jour du samedi 29 janvier
2005, vers 23:44, Jack Malmostoso <[EMAIL PROTECTED]> disait:
> Since the PBG4 has a nVidia graphic chip it will not sleep (AFAIK)... at
> least until BenH gets one and goes one step forward in becoming a
> saint.
Benh will no
how to put a powerbook g4 to sleep when closing
> > the cover so you do not have to reboot anytime you close the cover for
> > more than a minute or two?
>
> Since the PBG4 has a nVidia graphic chip it will not sleep (AFAIK)... at
> least until BenH gets one and goes one
My understanding is that it is working as reported by ppcaddicts
Check their site.
On Sat, 2005-29-01 at 23:44 +0100, Jack Malmostoso wrote:
> Ciao Christopher Molnar, nel tuo messaggio dicevi:
>
> > Has anyone figured out how to put a powerbook g4 to sleep when closing
> > t
gt; Ciao Christopher Molnar, nel tuo messaggio dicevi:
>
> > Has anyone figured out how to put a powerbook g4 to sleep when closing
> > the cover so you do not have to reboot anytime you close the cover for
> > more than a minute or two?
>
> Since the PBG4 has a nVidia gr
Vincent Bernat wrote:
Since the PBG4 has a nVidia graphic chip it will not sleep (AFAIK)... at
least until BenH gets one and goes one step forward in becoming a
saint.
Benh will not be able to find out how to make it to sleep without some
specs. It is the same story with ATI based one: the sleep st
005-29-01 at 23:44 +0100, Jack Malmostoso wrote:
> > Ciao Christopher Molnar, nel tuo messaggio dicevi:
> >
> > > Has anyone figured out how to put a powerbook g4 to sleep when closing
> > > the cover so you do not have to reboot anytime you close the cover for
> &
uo messaggio dicevi:
> > >
> > > > Has anyone figured out how to put a powerbook g4 to sleep when closing
> > > > the cover so you do not have to reboot anytime you close the cover for
> > > > more than a minute or two?
> > >
> > >
On Sat, Jan 29, 2005 at 05:11:58PM +, Christopher Molnar wrote:
> Has anyone figured out how to put a powerbook g4 to sleep when closing
> the cover so you do not have to reboot anytime you close the cover for
> more than a minute or two?
It really depends on your PB G4. If you ha
Hi there...
On Sam, Jan 29, 2005 at 11:44:57 GMT, Jack Malmostoso wrote:
> Ciao Christopher Molnar, nel tuo messaggio dicevi:
>
> > Has anyone figured out how to put a powerbook g4 to sleep when closing
> > the cover so you do not have to reboot anytime you close the cover f
Le dimanche 01/30/05 Alexander Clausen <[EMAIL PROTECTED]> a écrit :
> My first goal is to get the VGA output working,
Are you aware about the job of Guido Guenther?
http://lists.debian.org/debian-powerpc/2004/11/msg00633.html
Regards.
--
Djoumé SALVETTI
--
To UNSUBSCRIBE, email to [EMAIL P
On Son, Jan 30, 2005 at 11:17:04 GMT, Djoume SALVETTI wrote:
> Le dimanche 01/30/05 Alexander Clausen <[EMAIL PROTECTED]> a écrit :
> > My first goal is to get the VGA output working,
>
> Are you aware about the job of Guido Guenther?
>
Yes, I am. I'm trying to make it work after a sleep cycle
On Sun, 2005-01-30 at 01:48 +0200, Simo Melenius wrote:
> Vincent Bernat wrote:
>
> >>Since the PBG4 has a nVidia graphic chip it will not sleep (AFAIK)... at
> >>least until BenH gets one and goes one step forward in becoming a
> >>saint.
> > Benh will not be able to find out how to make it to sl
On Sat, Jan 29, 2005 at 11:44:57PM +0100, Jack Malmostoso wrote:
> Ciao Christopher Molnar, nel tuo messaggio dicevi:
>
> > Has anyone figured out how to put a powerbook g4 to sleep when closing
> > the cover so you do not have to reboot anytime you close the cover for
> &g
Hey,
I'm trying to find a 802.11g (54g) wireless solution for my new
powerbook G4. I have recently tried to buy a Netgear WG511 because I
had read some good feedback, but as is always the case they have again
changed the version and it won't work.
I apparently have bought Netgear wg511
Hi,
I'm trying to install debian on a powerbook G4 (titanium).
as the cd is non bootable, I grab the linux kernel and ramdisk.image.gz
from /potato/main/disks-powerpc/2.2.19-2000-12-03/powermac/
to a mac partition of the disk, wich contains yaboot yaboot.conf (edited
and mod
>
> 1) The Radeon Issue.
> I found some information about people who got Xfree running with
> the radeon driver, not only with fbdev (Its working with FBDev,
> but KDE3 is sloow)
> Is is possible? And how?
If it's *really* slow you're probably using the openfirmware
>>
>> 1) The Radeon Issue.
>> I found some information about people who got Xfree running with
>> the radeon driver, not only with fbdev (Its working with FBDev,
>> but KDE3 is sloow)
>> Is is possible? And how?
>
>If it's *really* slow you're probably using the openfirmwa
Hi together,
another Problem with my new Powerbook G4 and Debian Sid.
The pcmcia Cardsystem seems to work flawless, but if i attach a card in
the slot i get the following messages:
May 19 17:55:47 pbk4 kernel: Linux PCMCIA Card Services 3.2.2
May 19 17:55:47 pbk4 kernel: kernel build
Hi all,
I have one question about the behaviour of the battery on my powerbook G4:
When the battery is full, and the electricity cable is still plug-in, does
this damage the battery ? I heard that when the battery full is, you have to
unplug the cable and wait before plug-in, till the battery
Hi list,
slightly off-topic:
something odd happened to me today after installing the latest OsX
security update: after the mandatory reboot, the backlight of my PB would
only shortly flash on, then immediately turn off while in OF (regardless
of whether I booted into the OF console, into the yabo
Hi,
I have installed Debian testing on a PowerBook G4 667 MhZ (the one with DVI
output and Radeon 7500). So, I followed the instructions at
http://www.cattlegrid.net/~christophe/titanium/ to get audio output working.
In particular, I created /etc/modutils/sound with the following contents
On Sun, Jul 06, 2003 at 09:25:33PM +0200, Tuxbe wrote:
> Hi !
>
> What do you think of Apple Powerbook G4 667 ?
I am very happy with it.
see http://cattlegrid.net/~christophe/titanium/
Christophe
> I'm very interesting to by this, and i would like to know if install debian
ever recently I have become very
interested in Apples Powerbook G4 17" (1,33 GHz PowerPC G4)
model nr M9110*/A.
It looks very nice and seems to have some neat capabilities such as
the backlit keyboard and dvd-burning capabilities.
Anyway, I was wondering if you could give some feedback on the
On Tue, 2003-10-28 at 12:17, Brendan J Simon wrote:
>
> I needed xfree86 version 4.3.0 or later. I found some prebuilt .debs that
> Daniel Stone put together and used apt to install it. He has a few
> mirrors around the world. Do a google search and you will find them.
Seems you didn't read htt
Hi Thomas,
I have a Powerbook G4 (867 MHz/15")
I'm actually a i386 user as you are, and I was forced to learn Linux
newly on a powerpc environment. I had to learn because some months ago
I bought a Powerbook (867 MHz/ 15"). I admit I bought it because this
machine is looking bett
Thomas,
I forgot this:
You can drive at least parts of OS X with speech commands: This fact
and some sort of Pacman game for OS X are some of the few reasons I
still have OS X on the same machine as Linux.
But at least the speech stuff will probably sooner or later be
available for Linux, too (or
Hi,
Brendan J Simon writes:
> I have now finally got X working on the PB17. [...] I needed xfree86
> version 4.3.0 or later. I found some prebuilt .debs that Daniel
> Stone put together and used apt to install it.
JFTR, Brendan's Powerbook is the old 17" model with the nVidia
graphics card. I
Wolfgang Pfeiffer wrote:
Detailed version:
After getting the machine I was playing for 3 or 4 months with Mac OS
X (10.2.*) only and in the end was a bit fed up by various issues on
that OS: IIRC I never got the XFree virtual desktop working on it (I
think it was because fink had problems downl
OoO En ce doux début de matinée du mardi 28 octobre 2003, vers 08:43,
Wolfgang Pfeiffer <[EMAIL PROTECTED]> disait:
> But at least the speech stuff will probably sooner or later be
> available for Linux, too (or is it already available?) ...
See, for example, KVoiceControl.
--
printk("What? oldf
Hi Michel,
You are correct. I didn't read the README at
http://penguinppc.org/~daniels/xfree86/README
I had read the README at
http://penguinppc.org/~daniels/xfree86/archive/README which is what
google through up at me.
Thanks for the pointer.
Last time I looked (not that long ago), XF 4.3
On Wed, 2003-10-29 at 01:46, Brendan J Simon wrote:
>
> You are correct. I didn't read the README at
> http://penguinppc.org/~daniels/xfree86/README
> I had read the README at
> http://penguinppc.org/~daniels/xfree86/archive/README which is what
> google through up at me.
> Thanks for the poin
Hi alltogether!
This patch is against 2.4.23-ben1. With it applied the kernel recognizes my new
12"
G4 PowerBook correctly. It changes the line
detected as : 287
to
detected as : 287 (PowerBook G4 12")
in cat /proc/cpuinfo.
Wolfram Quester
--- /home/wol
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kirill Lapshin wrote:
| Hello,
|
| I am new to this port; please be gentle.
|
| I just got my new shining pbook 15", installed sarge on it using
| pre-rc2 debian installer, and most of the things worked just fine
| out of box, which impressed me a lo
On Thu, 2004-10-21 at 00:37, Guglielmo Dapavo wrote:
> .
> |
> | 1. Sleep. When I close lid, backlight turns off, if I reopen it
> | right away, it will turn back on as expected, however if I wait for
> | few minutes, and then open the lid, pbook won't wake up. I've seen
> | quite a few messages
On Fri, 2004-10-22 at 11:07, sean wrote:
> > tibooks work already, aluminium are the one that don't.
> I've been struggling with sleep on my TiBook 550 for many many months.
> The screen just stays black when the system wakes up. Would you be so
> kind out as to spell out for me exactly what the m
> tibooks work already, aluminium are the one that don't.
I've been struggling with sleep on my TiBook 550 for many many months.
The screen just stays black when the system wakes up. Would you be so
kind out as to spell out for me exactly what the magic combination is
using a 2.6 kernel? ie: wha
Anybody could tell me if could it be possible to have mol working properly with Alu 17"?, i only have 8 bit and the graphics are really ugly.
Best regards
---
"¿Suspiráis al recordar aquellos días de Mini
Hi,
I have an Apple PowerBook G4 15" 1.25 Ghz and I posted at
http://isadora.homelinux.net/debian/powerboook/
all the stuff needed to make this toy work with Debian.
You can find there my last 2.6 kernel (images and source in Debian
Package), sources.list for apt, XF86Config for XFree
hi,
since jesterday I am trying to install debian on my powerbook g4 (the
new 1 with 1.33GHz)
so I have download the iso file from debian.org for powerpc and have
burn it, but I just cannot boot from the CD.
I have find some tutorials online where it says I need to copy the
root.bin
Hi,
I've got an Nvidia-based 12" G4 albook. I'm well aware that in the forseeable
future sleep etc, will not be possible on these machines.
However, it seems that, based on some other posts about turning backlights
off, that it might be possible to turn off the backlight when the lid is
close
Hi,
I have tortured google for some days now trying to get my old monitor
here to work as a second screen. I can start it with a correct
XF86Config, but I get weird yellowish look on both screens.
I hear that problem has been resolved before, but I didnt find anything
except "use Daenzer's dri-tr
salut pascal..
* Pascal Chenevas-Paule <[EMAIL PROTECTED]> [2004-08-07 12:17 +0200]:
> Does an Howto Debian install exist for new Alu Powerbook 1,33 ?
>
> I search people whitch have experiences whith debian on this machine.
check these out:
http://tuxmobil.org/apple.html
cheers,
sebastian
--
Hi..
I have the new Powerbook 15" 1.5GHZ. The material is smilar on your
powerbook.
I have install sucessfully with the current sarge installer ( 40 mo).
All work no problem just make a new kernel for the X support for my graphic
card Ati 9700 mobility radeon 128mb. But you have only 2D not the 3
Hi!
I have two proplems I might want to address: I haven't yet found out
how to suspend to disk, that is, not running out of power when I leave
my PowerBook in standby mode for three days or such. I have found the
pm-hibernate utility, but it immediately restarts my system again,
failin
Hello,
I like to share some information on running lenny on my powerbook g4.
More information on hardware and features is attached.
* On installation I run into a freeze, once more at the point when
the time was configured but that's not the point as I found out. I
have a pcmcia m
On Thu, Jan 15, 2009 at 11:07 AM, Logan Airth wrote:
> Good morning. I recently acquired a PowerBook G4 12" and I was thinking
> about installing Debian. I have had some experience running other flavours
> of Linux on the x86 platform. I have been doing some research however since
On 15-Jan-09, at 1:07 pm, Logan Airth wrote:
Good morning. I recently acquired a PowerBook G4 12" and I was
thinking about installing Debian. I have had some experience running
other flavours of Linux on the x86 platform. I have been doing some
research however since the hardware that
On Thu, 15 Jan 2009 10:07:16 -0800, "Logan Airth"
wrote:
> Good morning. I recently acquired a PowerBook G4 12" and I was thinking
> about installing Debian. I have had some experience running other
flavours
> of Linux on the x86 platform. I have been doing some rese
>>>>> "Logan" == Logan Airth writes:
> Good morning. I recently acquired a PowerBook G4 12" and I was thinking
I finally installed Debian (testing) on my PB 12" G4 a few weeks ago.
I followed the directions at http://philobsd.free.fr/Debian/branden.html
fo
On Thu, Jan 15, 2009 at 10:07:16AM -0800, Logan Airth wrote:
> Good morning. I recently acquired a PowerBook G4 12" and I was
> thinking about installing Debian. I have had some experience running
> other flavours of Linux on the x86 platform. I have been doing some
> research
On Sun, Jan 18, 2009 at 2:01 AM, Wouter Verhelst wrote:
> On Thu, Jan 15, 2009 at 10:07:16AM -0800, Logan Airth wrote:
> > Good morning. I recently acquired a PowerBook G4 12" and I was
> > thinking about installing Debian. I have had some experience running
> > othe
On Sun, Jan 18, 2009 at 08:04:14PM -0800, Logan Airth wrote:
> Thank you all for your excellent information. My apologies regarding the lack
> of information on my platform. For those that care but about it, I am running
> a PowerBook G4, 1.33Ghz. with 60gB HD and the nVidia Geforce Go 5
1 - 100 of 1018 matches
Mail list logo