Yes Ludovic, it is true. I notice the same some days ago.A. L. Pacifico2006/1/28, Ludovic Courtès <[EMAIL PROTECTED]>:
Hello,Running `date -s ' on my Ultra 5 systematically makes themachine hang. Looking at what google says about it, this seems to be a"known problem", one that hasn't been solved y
Look,
Attached I'm sending a config file I used to compile kernels. For me
it works fine on 2.4 series. I hope it can solve your problems. My
machine is also a Ultra 30.
Regards,
Pacifico
2005/7/15, Martin <[EMAIL PROTECTED]>:
> On Fri, 2005-07-15 at 10:04 +0200, Giulio Sichel wrote:
> > I get t
Please,
Where can I find an old Debian 2.2 (Potato) iso image for sparc?
Thank you,
Antonio
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Sorry, the command is "dpkg-reconfigure xserver-xfree86"
Regards,
Antonio.
Antonio Luiz Pacifico escreveu:
Daniel,
On Debian/GNULinux you should use "dpkg-reconfigure xserver-x-free86"
instead of xf86config!
Regarding your card, mouse, keyboard, screeen resolution (etc...
Daniel,
On Debian/GNULinux you should use "dpkg-reconfigure xserver-x-free86"
instead of xf86config!
Regarding your card, mouse, keyboard, screeen resolution (etc...) read
the messages while the above command is running. And see at
www.xfree86.org what drive you must choose in order.
Good luck,
Dear Sebastian,
On my Ultra 30 I've used HappyMeal with 2.4.27 since August: no problems.
In fact, I compiled the 2.4.27 and constructed HappyMeal *inside* the
Kernel. Always I compiled the kernel I put it into the kernel, so as a
module I d'ont know anything (sorry).
Regards,
Antonio
Sebas
I've been using 2.4.27 since August: no problems until now, except by
the fact that I can't reach console from X typing "Ctrl+Alt+Fx"
(x=1,2,3,...).
Good to know that in 2.4.28 X is not working. Sometimes the better is to
wait! If I were you I would come back to 2.4.26 or 2.4.27.
Luck,
Antoni
Antonio Luiz Pacifico <[EMAIL PROTECTED]> wrote:
Some days ago I related that kernel source 2.6.7 was with erros during
the compilation.
David S. Miller answered to try 2.6.8-rc3.
I did. But the compilation failled again.
How did it fail with 2.6.8-rc3? With arch/sparc64/def
Some days ago I related that kernel source 2.6.7 was with erros during
the compilation.
David S. Miller answered to try 2.6.8-rc3.
I did. But the compilation failled again.
So I decided to come back to kernel 2.6.6. In fact this kernel and his
predecesor, 2.6.5, fail on the following item (at th
Dear folk,
Compling the kernel source version 2.6.7 on sparc64 architecture I
reveived the following error message:
In file included from include/linux/signal.h:6,
from include/linux/sched.h:25,
from include/linux/module.h:10,
from init/main.c:16
Yesterday I decided to upgrade from woody to sarge. I didn`t use sarge
iso image cd, nor netinst, and so on. I went by other way, more
complicated, I agree, but it worked. The steps I did was:
1. Install woody base system only (stable);
2. Compile a new kernel using egcs64 (old no!, but works!).
U/Linux v3.0.r4 running IMP3.2 Webmail.
--
Antonio Luiz Pacifico
Instituto de Pesquisas Tecnologicas do Estado de Sao Paulo S/A
Agrupamento de Engenharia Termica
Av. Prof. Almeida Prado, 532 - Cidade Universitaria
Cep: 05508-901 Sao Paulo - SP
Tel: (11) 3767-4520
Fax: (11) 3767-4784
I'm trying to compile kernel 2.4.24, but the "make" command seems to do
not works properly. My tries were:
FIRST TRY: command ...# make menuconfig
rm -f include/asm
( cd include ; ln -sf asm-sparc64 asm)
make -C scripts/lxdialog all
make[1]: Entering directory `/usr/src/linux-2.4.24/scripts/lxdi
.21 sparc32 and it works fine.
So, try upgrading your kernel (after booting from CD-ROM or the net) and see
if that helps. Other than that I guess your only option is re-installing.
Regards,
Markus
--
Antonio Luiz Pacifico
Instituto de Pesquisas Tecnologicas do Estado de Sao Paulo S/A
Agrupam
C (Posix) enviroment. Before locales
2.3.2-7 it was working fine.
The disadvantage of using Posix is that all the enviroment goes to
English and some applications, like gnumeric, doesn't work with accents
any more.
Would it bug?
Antonio Luiz Pacifico
Hi,
I upgraded my debian testing today. Without any reason I notice the
keyboard I'm lost the hability to accent the words.
My keyboard is sun type 5.
Until that upgrade I used the "compose" key plus one symbol, for example
' plus a to get a with accent. Now it stops working.
Interestingly em
At http://www.ultralinux.org/faq.html there are a good step by step.
Look at the "Section 4: Building".
Good luck!
Antonio L. Pacifico
On Wed, 2003-05-07 at 09:09, [EMAIL PROTECTED] wrote:
> hi
>
> will like to compiler my debian kernal. were can i find good step by step to
> help me do this?
>
Doc,
Just do "apt-cache search kernel-image" at the command line. Soon it
will appear a list of available kernel-images pre-compiled. Choose that
best fit to your system and do, as a root, "apt-get install . However, see if there is the image you are looking
for.
Regards,
Antonio L. P.
On Thu, 20
When you upgrade to woody you need to take some care. First of all,
upgrade your souces-list in /etc/apt: if you installed by CD, changing
to http souces. After that, BEFORE you try an upgrade, atualize libc6
using dpkg -i libc6 (after the download of the package, of course). Take
care with silo up
Hi Richard,
I`m sorry, I noticed now that you have an UK type. Ok, install xkeycaps
and choose your model, probably it will work fine.
Antonio.
On Thu, 2002-11-14 at 12:10, Richard Lincoln wrote:
> Hello
>
> I am new to debian, I think I have the latest release, and I'm having
> trouble setting
Hello Richard,
try dpkg-reconfigure xserver-xfree86, then type the following
informations (i put this parte of my XF86Config-4) when asked:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option
Scott,
You must install egcs64 in order to be able to compile the kernel in Ultra's.
Antonio.
Mensagem original
De:
Scott Walker
Fecha:
Fri 11/8/02 12:52
Para:
debian-sparc@lists.debian.org
Assunto:
Last issue... and I'm out of everyone's hair (Hi Ben!! :) )
I
Another opption would be recompile the kernel and put cs4231 into the
kernel, I mean, constructed in the kernel, not as a module, then in
sound opption you leave without marks.
Antonio.
PS: I work in an UltraSparc 30. I'm using the kernel version 2.4.19 and
everything is working fine. Any doubsts
Helo for all,
I am using one Sparc Staion 4 (sun4cdm) and, since I installed the
system I never got /dev/lp0 (lp1 and lp2) under /dev. I don't know why?
I got the kernel 2.4.19 and compiled it using the sunparport opption. It
compiled fine (although I had some problems with bad opptions I put on
s
Helo for all,
I am using one Sparc Staion 4 (sun4cdm) and, since I installed the
system I never got /dev/lp0 (lp1 and lp2) under /dev. I don't know why?
I got the kernel 2.4.19 and compiled it using the sunparport opption. It
compiled fine (although I had some problems with bad opptions I put on
s
Thank you Michael, but I´ve tested this before and I got the same
problem! I really don´t know what happens!
Antonio.
On Wed, 2002-10-16 at 15:58, Michael J. Saletnik wrote:
> On October 16, 2002 at 15:15, Antonio Luiz Pacifico wrote:
> > kmod: failed top exec /sbin/modprobe -s -k bloc
Helo for all!
I'm trying to compile a kernel (2.4.19) to work on my SparcStation 4. I
guess I tried to compiled it more than 5 times. Until now I haven´t got
any success. Always, at the boot processes I receive the following
message:
kmod: failed top exec /sbin/modprobe -s -k block-major-8, errno
Helo for all,
I'm getting problems in the boot process. I installed Debian GNU/Linux
on an old Sparc Station 4 (sun4cdm) using the Potato CDROM (kernel
2.2.19). After that I've run lots of upgrades so now I have a actualized
system. Yesterday I downloaded the kernel 2.4.19 I compiled it. After
tha
Many thanks to Andrew. I recompiled my 2.4.19 kernel and now everthing
is working fine!
Antonio.
On Thu, 2002-09-19 at 16:37, Andrew Sharp wrote:
> On Thu, Sep 19, 2002 at 03:39:03PM -0300, Antonio Luiz Pacifico wrote:
> > Hello for all,
> > I'm getting the following probl
: Antonio Luiz Pacifico
Cc: Debian-Sparc
Assunto:Re: Printer driver(?) problem
On Thu, Sep 19, 2002 at 03:39:03PM -0300, Antonio Luiz Pacifico wrote:
> Hello for all,
> I'm getting the following problem.
> I run Debian GNU/Linux on a Ultra 30. Until now I have bee
Hello for all,
I'm getting the following problem.
I run Debian GNU/Linux on a Ultra 30. Until now I have been using kernel
2.2.19 and I did not have problems.
Today I downloaded the Kernel 2.4.19, compiled it and... everthing are
running OK, but not the printer. I think I did something wrong in the
If I were you I'd preffer Debian GNU/Linux just because the atualization
of the packages are faster then the others.
I've been running Debian GNU/Linux on my Sparc since March 2002. Until
now I hadn't problems. More than this, the community of Debian, I think,
is more friendly to answer your doubts
6/bin/X. After that I gave the following commands:
chown root.root /usr/X11R6/bin/X
chmod 4755 /usr/X11R6/bin/X
startx... and now it works!!!
That is, I'd like to know: Why my system works with an antiquade binary?
I really don't know, but it works!
Is there a reason for this?
Thank's in advance!
Antonio Luiz Pacifico
ges you'll
need to download.
Good look,
Antonio Luiz Pacifico
[EMAIL PROTECTED]
On Wed, 31 Jul 2002, Brennan Thompson wrote:
> Does anyone have any suggestions about what printer I could attach to an
> SS2? Obviously laser is preferable, but most important is easy
> install
On Thu, 2002-07-04 at 17:47, Franz Georg Köhler wrote:
> On Thu, Jul 04, 2002 at 05:28:41PM -0300, Antonio Luiz Pacifico <[EMAIL
> PROTECTED]> wrote:
> >
> > I'm using Debian GNU/Linux 2.2.19 in a Sun UltraSparc 30 and I'm getting
> > problems when using g
Hello for all,
I'm using Debian GNU/Linux 2.2.19 in a Sun UltraSparc 30 and I'm getting
problems when using gnome-session as window maneger.
If I try gnome-session in .xsession file and call startx the
gnome-session comes out, but with a problem: all applications I open
goes to the left above corn
Hello for all.
I work with a Sparc Ultra30 machine running Debina/GNU Linux 2.4.18.
I have a HP LaserJet 2100 printer.
I installed the complete cupsys package.
I tried to configure the printer using cups by
http://localhost:631/admin
Well... I have a lot of problems and first of all I need to know
On Tue, 2002-06-11 at 14:04, Aravind Vinnakota wrote:
> Hi all,
> Thanks for all the responses. I tried twm, gnome, icewm, blackbox and
> tldesk window managers. Of which I could not find any browsers other than
> lynx. The netscape browser which is coming default with some of the window
> manage
Probably it will... Or install only the basic system, then do the
upgrade. I did this. Besides I downloaded the kernel 2.4.18 and
recompiled it. To do your upgrade it is interesting to have a list of
packages to install/upgrade.
Good luck!
Pacifico
On Tue, 2002-05-28 at 09:51, [EMAIL PROTECTED] wr
I run Debian GNU/Linux on a Sparc Ultra 30. My keyboard is type 5c. My
problem is: I`d like to write in Portuguese (Brazilian), but all the
documents I read, e.g., keyboard HOWTO's, etc.., teach how to configure
it on i386. I also noticed that some files and directories commoun in
i386 I haven`t on
40 matches
Mail list logo
