Geert Stappers wrote:
ERROR: Last trap: Fast Data Access MMU Miss
I did seen such messages myself. I got them at a warm boot and
could resolve them by a cold boot. (power down, machine gets cold, power up)
I have seen this on a batch of Ultra-1s which I had foolishly upraded to
the
Glacier Hi all
I'm trying to install Debian 4.0r4a on SunBlade100.
WS conf.:
OBP: 4.17.1
Ram: 1Gb
Debian:
SILO 1.4.13
Staring the boot from CD I see:
Allocated 8 Megs of memory at 0x4000 for kernel
Loaded kernel version 2.6.18
Loading initial ramdisk (3881967 bytes at
Op 20081022 om 08:08 schreef Ambrogio Sironi:
Glacier Hi all
I'm trying to install Debian 4.0r4a on SunBlade100.
WS conf.:
OBP: 4.17.1
Ram: 1Gb
Debian:
SILO 1.4.13
Staring the boot from CD I see:
Allocated 8 Megs of memory at 0x4000 for kernel
Loaded kernel
Hello all
I'm installing debian 3.1 on my Sun Blade 100. I've found suitable the
boot net, and works, but when I setup my keyboard (as qwerty/us) I
find that keys does not correspond to the right symbols.
For example, to get RETURN I've to press CONTROL.
Not sure it's a keyboard problem, by
I am attempting to install firmware on a SunBlade 100. I need
to first upgrade the PROM. I have tried a few different ways, but I
cannot make a CD (with the PROM) that the machine will boot. Does
anyone know how to repackage the PROMs into ISO images that the Sunblade
will boot?
I apologize if this has been asked before, but I cannot find the answer on
Google or the list group archives from the past year.
I have bought the sparc Debian cd's for 3.01 R1 from AACDS.com and attempted
to install them on a SunBlade 100. On my SunBlade the OBP version is 4.0.45
2001/02/08 and
Hello David,
Do this and try to get a working 2.4.5 kernel on the blade, then we'll
move on to trying to deal with the display noise.
I have a working 2.4.5 kernel on the blade now, without noise (see one of
my previous email about it). But without framebuffer at this time. I will
try to
Hello David,
Olivier Bornet writes:
My current configuration is a SunBlade 100 and a Ultra 10, both
connected to
the same screen, a Sun 18.1 LCD. The problem is also present with
only the
Blade. The Ultra 10 has no problem with the display.
This may be the
Olivier Bornet [EMAIL PROTECTED] writes:
Can you send to me which test I can make ? (and eventualy the
.config you use for generate the standard distributed kernel
image).
In the Debian GNU/Linux system, the .config used to build kernels is
stored in /boot/config-VERSION. If you use
Hello,
Can you send to me which test I can make ? (and eventualy the
.config you use for generate the standard distributed kernel
image).
In the Debian GNU/Linux system, the .config used to build kernels is
stored in /boot/config-VERSION. If you use kernel-package, it does
this for
Hello all,
Olivier Bornet writes:
My current configuration is a SunBlade 100 and a Ultra 10, both
connected to
the same screen, a Sun 18.1 LCD. The problem is also present with
only the
Blade. The Ultra 10 has no problem with the display.
This may be the
Hello again,
I will try to answer myself to my questions, so there is a reference
in the archive.
On Sun, Jun 10, 2001 at 11:24:41PM +0200, Olivier Bornet wrote:
- is the standard tree 2.4.5 (or other) good, or must I add some patches ?
I have take the standard 2.4.5 tree. Certainly some
It's me again,
just to complete my last posts.
OK. I have compile a new kernel, and the garbage on the screen is away.
- With my config, I have a black on white console, not the graphic console
with the small Penguin on the top left.
- I have manualy created the device for the USB (without,
just to complete my last posts.
OK. I have compile a new kernel, and the garbage on the screen is away.
- With my config, I have a black on white console, not the graphic console
with the small Penguin on the top left.
- I have manualy created the device for the USB (without, no
On Mon, Jun 11, 2001 at 11:43:30PM +0200, Olivier Bornet wrote:
It's me again,
just to complete my last posts.
OK. I have compile a new kernel, and the garbage on the screen is away.
- With my config, I have a black on white console, not the graphic console
with the small Penguin on
Olivier Bornet [EMAIL PROTECTED] writes:
PS. If someone as a link to a HOWTO for compiling a kernel on a
Debian system, thanks in advance.
apt-get install fakeroot kernel-package cd /usr/src/linux make menuconfig
fakeroot make-kpkg --revision hostname.1 kernel_image dpkg -i
Hello David,
On Fri, Jun 08, 2001 at 11:57:07AM -0700, David S. Miller wrote:
Olivier Bornet writes:
I'm trying to install debian on a SunBlade 100 with a SunExpert 3D lite.
Take the expert3d card out, Linux cannot drive it anyways.
Thanks, this correct the problem, and I have now the
Olivier Bornet writes:
I have some questions :
- can I allready install an X server for the base Mach64 card (and how) ?
Yes, Ben should have XFree86-4.1.0 packages, if not now then soon.
- is there a work on the expert3d card ?
Absolutely not, the vendor refuses to provide hardware
Hello David,
I have some questions :
- can I allready install an X server for the base Mach64 card (and how) ?
Yes, Ben should have XFree86-4.1.0 packages, if not now then soon.
It's OK. I have now the Ben's XFree86 4.0.3 packages, and it works. I will
update and try the 4.1 as soon
Olivier Bornet writes:
- is there a work on the expert3d card ?
Absolutely not, the vendor refuses to provide hardware programming
information.
I don't know if it can help, but all users interested by this port can send
an
email to them, so they can see there is an
Hello,
My current configuration is a SunBlade 100 and a Ultra 10, both connected
to
the same screen, a Sun 18.1 LCD. The problem is also present with only the
Blade. The Ultra 10 has no problem with the display.
This may be the difference, as I have no LCD to test with.
Seem not. I
21 matches
Mail list logo
