On Wed, 11 Mar 1998, Jens B. Jorgensen wrote:
If you want to do a full backup each night the cron job is a snap, just
'dump 0f /dev/tape-device'. As to the restore disk this is something I've
Rob Goodwin wrote:
I would like to set up a fail-safe backup system for a linux box that
i am
When [EMAIL PROTECTED] wrote, I replied:
Try the following:
su - root
the_root_password
dmesg | pg
ENTER
ENTER
.
.
.
It will display in a way you can read at a leisurely
pace, the messages that wizz by at startup. Specifically,
the messages that were displayed during the last startup
of the
I'm not sure If my first attempt got through... probly mail server crash
did it... *GRIN*
In the /etc/issue file you can use the \n.\o sequence to get a copy of
your hostname and domain name right?
In that case, why to I get omnic.(none) ??? Where is this (none) coming
from?
Pure interest
Not sure if this got through either...
Actually, it's not a great deal,
I have acquired an old 386 with 4 meg RAM, and am going to install linux
on it as a router for my small home network..
When I tried to install off of my trusty 1.3.1 CD, I get the message:
RAMDISK: Compressed image found
On Fri, Mar 13, 1998 at 09:59:22AM -0800, Sudhakar Chandrasekharan wrote:
[backspace problems described...]
Am I right in assuming that the upgrade to XSuSE was the reason for the
problem? How do I get backspace working again? What files do I need to
edit?
I also had problems with the
On Wed, 11 Mar 1998, Jens B. Jorgensen wrote:
Use the hdparm package, which can instruct your drive to spin itself
down at a specified timeout (if the drive supports it).
This is not what I want. That way the disks spin down too often.
What I was looking for is a way to spin them down when
Status: Stage 2: Further along, running into DNS issues
Thanks for the suggestions thus far:
I had a shell script which didn't have the correct 'executable'
permissions. Something like rw-rw-rw instead of chmod 777
/etc/ppp/whatever_script.
Here is how far I have progressed:
1. Executing pppd
On 13 Mar 1998, Ben Pfaff wrote:
I upgraded to hamm about 2 months ago. I *still* have the problem with
last/wtmp after following the instructions for removing the libc5 files
and rebooting. I cannot use man:
[EMAIL PROTECTED]:~] man man
man: can't open /tmp/zman07736aaa:
M. Fong [EMAIL PROTECTED] writes:
Status: Stage 2: Further along, running into DNS issues
Thanks for the suggestions thus far:
I had a shell script which didn't have the correct 'executable'
permissions. Something like rw-rw-rw instead of chmod 777
/etc/ppp/whatever_script.
Here is
Kevin Cave [EMAIL PROTECTED] writes:
I'm having a spot of difficulty getting xisp to work...
Can anyone who has successfully got this package working give
me a few pointers as to what files to configure etc. ?
I do.
First, get a new xisp.deb version from ftp://134.95.210.54/pub . The
Ralph Winslow [EMAIL PROTECTED] wrote:
Try the following:
su - root
the_root_password
dmesg | pg
ENTER
ENTER
I can't locate 'pg' on my machine (hamm, up to date through last
week). What is it and what package does it come from?
What kernel version are you using? I have
On Fri, Mar 13, 1998 at 03:36:02AM +0100, Martin Schulze wrote:
We have moved the listserver onto another machine. This machine acts
as lists.debian.org just as expected. The difference is that this
machine will not process subscription and unsubscription requests.
Instead they will be
Richard A Nelson [EMAIL PROTECTED] writes:
I'm improving my connectivity to work machines now...
NFS is working fine, but I don't know which Samba package
to install: smbfs or ksmbfs
Use smbfs. ksmbfs is obsolete. The maintainer has written some comments
about this some time ago. You could
On Fri, Mar 13, 1998 at 01:24:33AM +, [EMAIL PROTECTED] wrote:
Can anybody of you please explain to me (hopeless newbie) why
when I can't see long filenames on mounted msdos partition? This
causes me some pain in the neck as I can't freely manipulate files
between linux and dos...
Hello,
My name is Joel and I am 16 years old. I am emailing you because
I need help downloading, installing, and useing Linux. So could you
please send me step by step on how to do those things. I would really
appriciate it. Thank you.
PS- Could you also tell me where I can download
HI there,
Here is a nice problem for you, I am not on the mailing list so
please reply to me personally.. I got many many lines of this in my
syslog:
Mar 14 13:16:33 vampire kernel: Ouch, no kerneld for message 2147419088
incremented each time, it happened after the modem on vampire
M.C. Bezemer [EMAIL PROTECTED] writes:
I'm using a bo system with netscape 3.01 gold. I now want to upgrade to
netscape 4, using the installer package from hamm. Now my question is,
which of the files from ftp.netscape.com should I use, and where exactly I
can find them.
Any of the versions
At 16:55 07.03.98 +0200, you wrote:
On Sat, 7 Mar 1998, Helmut Leinfellner wrote:
Where do I get diskmanager ?
Go and seek it from manufacturers www-pages. I have Quantum drives, so
I found them from www.quantum.com. I never install it, so I don't really
know how it works. Hope you find a
Richard Sevenich wrote:
dpkg: dependency problems prevent configuration of kdelibs:
kdelibs depends on libgif2 (= 2.3); however:
Package libgif2 is not installed.
kdelibs depends on qt1 (= 1.3); however:
Package qt1 is not installed.
dpkg: error processing kdelibs (--install):
I tried recompiling my kernel to add FAT32 support, but when it came
time for the link part of the compile, there were a bunch of undefined
functions. I don't know why Debian 1.3 gave two kernel versions, but
it was the 2.0.30 version that I tried compiling.
fs/fs.o: In function
I would like to help but cannot.
I used to get the message re Unknown PCI device but my system carried on
regardless. There was advice to report it to someone in France, which I
did and the problem eventually went away.
The boot kernel probes for many, many bits of hardware and my guess is
On Thu, 12 Mar 1998 12:35:57 CST, wrote:
Hi, All
I have problem sending e-mails from EXMH, but I can receive them succesfully.
It looks like ordinary Mail program works fine (I can both send and receive e
-mails). Here is the message from EXMH:
post: problem initializing server; [RPLY] 550
---Collin Rose [EMAIL PROTECTED] wrote:
: how can I install the 3c509b ethernet card on my
:Debian box?
Quick answer? Use the 3c509 driver ... it's on
the modules disk.
However, you may need to grab the 3C5X9CFG.EXE
utility from the 3com
website (www.3com.com) and reconfigure
[EMAIL PROTECTED] hat gesagt: // [EMAIL PROTECTED] wrote:
For a long time, since two days after I first installed a pre 1.3 debian
system, most of the icons in fvwm2 menus stopped working. Until the latest
afterstep, only root could get all the icons in afterstep, but the latest
afterstep
Hello,
I just tried the 2.0 (unstable) boot disks today. I ran into a few
problems. I'm reporting them here in hopes they will be helpful. If
you need more info I'll be happy to do what I can (if you need me to
blow away the install and start over, I'd like to know this weekend.
I'm not going
Hi!
I have an urgent problem with smail 3.2.0.100-4 from hamm:
I have messages like this:
Failed TO:koenigse DIRECTOR:aliases ERROR:(ERR100) unknown user
although user koenigse exists (having been expanded from an alias). The problem
is that
delivery works in about 95% of all cases and I
tony mollica writes:
I have used the netscape install scripts to install 4.03 and
then upgrade to 4.04 without any problems at all. Of course,
dpkg doesn't know it's there, but netscape communicator works
just fine. Instructions are in the readme files in the
downloaded .tar.gz.
How about Netscape4? It seems to work fine for me. (socks5 server)
Sudhakar Chandrasekharan wrote:
$ cat /etc/socks.conf
sockd @=socks.domain.com * 0.0.0.0
$ rftp ftp.debian.org
ftp: connect: Connection refused
ftp bye
$ which rftp
/usr/bin/rftp
I have had this problem for over a
G'day,
If the NT partition is NTFS you have quite a bit more work to do. NTFS
read-only
support for Linux is available, but requires kernel patches and a kernel
rebuild.
Instead of doing this, I'd recommend creating a FAT partition (if you
have the free
space) that both NT and Linux can
With a private net IP number (192.168.x.y) you cannot access anyone other
than your ISP unless he is masquerading you.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Lindsay Allen [EMAIL PROTECTED] Perth, Western Australia
voice +61 8 9316 248632.0125S 115.8445E
Does anyone know where the limitation of this problem occurs and how to
correct it? Is this due to a kernel or nfsd hard define?
Thanks.
Mar 13 05:02:08 srvr nfsd[159]: non-standard errno: 24 (Too many open
files)
Mar 13 05:02:45 srvr last message repeated 9 times
Mar 13 05:02:45 srvr
Hi,
Have you tried the so called ```tecra'' disks? Some laptops
need a zImage and not the default bzImage kernel (bzImage packaging
allows for larger kernels to be built).
manoj
--
David Letterman's Things we can be proud of as Americans: Greatest
number of citizens who have
[EMAIL PROTECTED] writes:
[get xisp 2.3p4.deb from ftp://134.95.210.54/pub if you use an older
version]
However, I can't use it becuase it concatentes its own chat script to
mine. I want to initialize the modem before giving it the
atd... command.
This is the entry init in
very near the beginning and:
Initializing random number generator...
Configuring serial ports
done.
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Typematic Rate set to 15.0 cps (delay = 500 mS)
INIT: Entering runlevel: 2
How did you produced
Hi everyone !
Just checking by to give you a POSITIVE update on my
fdisk-partitioning-Win95-DOS-BIOS problem and to let others know the
solution if you have the same kind of problem.
The problem was with my hard drive (Quantum, 4.3 GB, CHS 14848-9-63). I
needed less than 1024 cylinders for DOS,
On Fri, Mar 13, 1998 at 06:07:19PM -0500, Ralph Winslow wrote:
When [EMAIL PROTECTED] wrote, I replied:
Try the following:
su - root
the_root_password
dmesg | pg
No need to be root.
hamish
--
Hamish Moffatt Mobile: +61 412 011 176 [EMAIL PROTECTED]
Rising Software
On Fri, 13 Mar 1998, Helmut Leinfellner wrote:
Where do I get diskmanager ?
Go and seek it from manufacturers www-pages. I have Quantum drives, so
I found them from www.quantum.com. I never install it, so I don't really
know how it works. Hope you find a solution. I have same problem and
When I boot into Debian 1.3, it eventually prompts me for a password
without ever having asked me for a login name. If I don't respond,
it keeps prompting me.
Also, when I initially installed, when I logged in as root, it
prompted me for a new password. But no matter how many times I gave
it a
Lee Bradshaw [EMAIL PROTECTED] on Fri, Mar 13, 1998 at 01:26:19PM -0500:
I also had problems with the xsuse matrox server. I ended up switching
to the new Xkbd method and removing stty erase ^H from my .bashrc
file. I still have some problems with backspace when I telnet/rlogin?
to other
Hi!
Does anyone know whether or not this card is supported and which server I
should run for it? Someone wants to install debian linux but only if it
supports her video card.
Thanx in advance,
Maarten Bezemer
The card is not supported as yet. This is for linux/X11, whether
debian, Red
On Fri, 13 Mar 1998, Norbert Veber wrote:
bah, and the other difference is that the machine name is va.debian.org, and
procmail didn't like that very much when filtering mail, so it dumped 70 or
so messages in my inbox :) Awell, no harm done, except I started freaking
out, because I
Hi,
mkdir /floppy /dos
mount -t msdos /dev/fd0 /floppy
mount -t msdos /dev/hda1 /dos
Remember to umount /dos /floppy when done (do not yank the
floppy without umounting it first; some data may not have been
flushed to disk).
You may try vfat instead of msdos (I think it
On Fri, Mar 13, 1998 at 11:09:08AM -0700, David Sewell wrote:
On Sat, Mar 07, 1998 at 06:53:53PM -0500, Scott McDermott wrote:
Martin Jackson [EMAIL PROTECTED] on Sat, Mar 07, 1998 at 12:30:35PM -0600:
Are there plans to include VIM 5.0 in the release version of hamm? It has
been
Greetings,
This card is not currently supported by debian, to my knowledge.
Partially, i would assume because it is so nes and Rendition, which makes
the controller, just recently released the white-papers to the xfree86
project so that they may start development on the x-server for it. So...
[This mail had bounced back once. Hopefully, it should work this time.]
I am running a hamm system with the latest updates. For the past few
weeks ncurses-bin and ncurses-base upgrades were failing because
/usr/share/terminfo already existed. I mv-ed /usr/shre/terminfo to
mkdir /var/log/news
On Thu, 12 Mar 1998, Erik van der Meulen wrote:
I have noticed something strange in my logfiles.
Since march 8, my /var/adm/messages show only lines like these:
Mar 12 22:14:23 souterrain syslogd 1.3-0#6: restart.
Mar 12 22:14:25 souterrain kernel: klogd 1.3-0, log
Helmut Leinfellner [EMAIL PROTECTED] writes:
I downloaded Quantum disk manager and it remapped(!) the information about
the number of the cylinders.
Now everything works !!! Hallelujah !!!
Just curious - did you remap the drive with the Quantum disk
manager _after_ linux was installed,
On 13 Mar, Norbert Veber wrote:
On Fri, Mar 13, 1998 at 03:36:02AM +0100, Martin Schulze wrote:
We have moved the listserver onto another machine. This machine acts
as lists.debian.org just as expected. The difference is that this
bah, and the other difference is that the machine name is
$ cat /etc/socks.conf
sockd @=socks.domain.com * 0.0.0.0
$ rftp ftp.debian.org
ftp: connect: Connection refused
ftp bye
$ which rftp
/usr/bin/rftp
I have had this problem for over a year now. I have tried all socks4.2
and socks 5 clients (both .deb packages and custom versions compiled
from
I upgraded to hamm about 2 months ago. I *still* have the problem with
last/wtmp after following the instructions for removing the libc5 files
and rebooting. I cannot use man:
[EMAIL PROTECTED]:~] man man
man: can't open /tmp/zman07736aaa: Bad file descriptor
No manual entry for man
Due to
---BeginMessage---
I have seen the replies to you about how to get to your floppy. It got me
wondering.
In the realm of curiousity I play with linux for a while until I realize it is
intruding
into
my work life and get back to WIN 95 NT. Everytime I get back to try and use
linux for something
I upgraded to hamm about 2 months ago. I *still* have the problem with
last/wtmp after following the instructions for removing the libc5 files
and rebooting. I cannot use man:
[EMAIL PROTECTED]:~] man man
man: can't open /tmp/zman07736aaa: Bad file descriptor
No manual entry
On Thu, 12 Mar 1998, George Bonser wrote:
On Thu, 12 Mar 1998, Erik van der Meulen wrote:
I have noticed something strange in my logfiles.
Since march 8, my /var/adm/messages show only lines like these:
[snip]
I would start by looking to see if /etc/syslog.conf got trashed somehow.
Daniel Martin at cush hat gesagt: // Daniel Martin at cush wrote:
The gimp (non-free in bo; free in hamm) is almost certainly what you
want.
DANIEL MARTIN
p.s. why non-free and then free? The gimp people stopped using Motif
and wrote their own (GPLed) toolkit.
The non-free part of
Can anybody of you please explain to me (hopeless newbie) why
when I can't see long filenames on mounted msdos partition? This
causes me some pain in the neck as I can't freely manipulate files
between linux and dos...
Since linux assumes that an MSDOS file system is to be operatable even
All disk access in Unix is through the directory tree and all directories
are under
the root (/) directory.
If the NT partition is FAT you're in luck. While logged in as root:
1) Create a mount point for the partition somewhere under the root
directory.
mkdir /winnt
2) Mount the
Jens B. Jorgensen wrote:
How about Netscape4? It seems to work fine for me. (socks5 server)
I did a little bit of research and found out that the problem is that
the rftp that comes with socks does not support pasv transfers. I just
installed ncftp, configured it for pasv and things seem to be
Arunas Norvaisa hat gesagt: // Arunas Norvaisa wrote:
Dear all,
Does anybody of you know where to get old version of Mutt,
which does not depend on libc6 - if this kind of it exists,
of course.
There should be a mutt_0.88-1bo1.deb in bo-unstable on your
debian-ftp-server.
--
Hi,
Sorry if this is off-the-topic.
I am trying to set up a firewall on our network, but to allow ftp
connections from internal machines to specific external sites (on a
per-site basis). The problem I am having is that ftp seems to use ports
other than 20 and 21.
At the moment I only allow
Just a note, everyone should continue to use the
debian-user@lists.debian.org address.
The fact that va.debian.org is sometimes in the headers is just a small
error. If you reply to an email please make sure it is cc'd to lists and
not va or things will go bonkers when we get the new new list
Bruce Dobrin writes:
Thanks for the suggestion, Are there different versions? The version of I=
magemake (convert) that I have will read rla's but not write them
You may want to check with the Debian maintainer and/or the upstream
maintainer/developer to see if a newer version
Bob Hilliard wrote:
Ralph Winslow [EMAIL PROTECTED] wrote:
Try the following:
su - root
the_root_password
dmesg | pg
ENTER
ENTER
I can't locate 'pg' on my machine (hamm, up to date through last
week). What is it and what package does it come from?
Looks like a simple more
On Sat, Mar 07, 1998 at 06:53:53PM -0500, Scott McDermott wrote:
Martin Jackson [EMAIL PROTECTED] on Sat, Mar 07, 1998 at 12:30:35PM -0600:
Are there plans to include VIM 5.0 in the release version of hamm? It has
been released for a while, but I haven't seen it in the update
Hi!
Richardson,Anthony ([EMAIL PROTECTED]) wrote:
If the NT partition is NTFS you have quite a bit more work to do. NTFS
read-only
support for Linux is available, but requires kernel patches and a kernel
rebuild.
You need't rebuild your kernel!
There is a debian package with an
Hi!
Does anyone know whether or not this card is supported and which server I
should run for it? Someone wants to install debian linux but only if it
supports her video card.
Thanx in advance,
Maarten Bezemer
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS
Adrian Monk [EMAIL PROTECTED] writes:
I am having the problem that some mail (only the occasional message) is
getting stuck in /var/spool/mail/input. Running mailq gives:
ABCDEFG-HJKLMNO From: atheris (in var/spool/smail/imput)
Date: Thu, 12 Mar 1998 22:35:35 + (Local
At 23:51 12.03.98 -1000, you wrote:
Hi All,
I've been struggling as a newbie both to Linux and programming to prepare
adequately to install Debian without too many tears. Been at at it for
four days days now, reading docs/faqs, preparing my fully-functional (at
the moment Win95 based) Quantum
Forwarding to [EMAIL PROTECTED] and the boot disk maintainer.
Thanks for the report!
Brandon
-
Brandon Mitchell [EMAIL PROTECTED] We all know linux is great... it
PGP: finger -l [EMAIL PROTECTED] does infinite loops in 5 seconds
Phone: (757) 221-4847 --Linus
There are a number of things to do, after you get what you need from
ftp.debian.org. Any attempt I might make here would be incomplete and
possibly inaccurate. I think there is a book out on Debian, does anyone
know how applicable it is to this sort of question, what the title is,
etc.?
On
I have debian 1.3. box and I can't set mouse sensitivity in X. Can you
help me ?
thanks.
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED]
Hi, All!
Thanks to everyone who replyed on this message. I think problem is fixed now,
and I would like to share my little experience. [ Hopefully people with real
knowledge after reading this oversimplified nonsense may decide to put
together FAQ with a bunch of examples how to really setup
howdy all.:-)
Just installed Debian linux and win95 on a system and wish to have dual boot
system with LILO as boot manager.
cfdisk shows:
/dev/hda1 Boot Primary Dos FAT16 (has Win95 installed on it)
/dev/hda5 Logical Linux
/dev/hda6 Logical Linux Swap
If I run
In an attempt to save the world from disaster, Florian Attenberger wrote:
Hi,
Some days ago i updated my hamm to the latest available packets.
Now update-menus creates the menu-directories in the root (/)
directory and I dont have menus any more in my window-manager.
Is this a bug or my
Hi,
If you have web access take a look at:
http://linuxos.org/Lhelp.html
which would point you to several Linux distributions ... On the subject of
a step by step guide to downloading and installing, check out
http://sunsite.unc.edu/LDP/HOWTO/Installation-HOWTO.html
I posted this a couple of days ago but not sure what happened to the original
or any replies due to mail problems master etc.
I have a demo program which I have included below which should do
some threads, in a C++ program. It works fine on Solaris 5.6,
it works fine on bo with libc5, but on
I am trying to set up a firewall on our network, but to allow ftp
connections from internal machines to specific external sites (on a
per-site basis). The problem I am having is that ftp seems to use ports
other than 20 and 21.
At the moment I only allow transfers on these two ports. This
Hi All,
Having a bit of bother trying to get hamm Dselect to install _anything_ ...
It keeps complaining that it can't locate 'perl-base'.
After a bit of hunting around, I discovered that a package named
'perl-base' is indeed listed among the /base/ packages of hamm in the
'Packages' index-file
Andre writes:
I discovered that a package named 'perl-base' is indeed listed among the
/base/ packages of hamm in the 'Packages' index-file on the ftp site, but
there is _no such package_ that I could find in the corresponding 'base'
ftp directory. No wonder my Dselect was confused!
What's
My backspace key has suddenly stopped working in X.
Now it acts like a [Delete] Key.
This happened when my KBD package died along with my /usr/loal/
directory, but did not recover when I reinstalled KBD.
Any ideas how to fix this?
Thanks,
Timothy
--
E-mail the word unsubscribe to [EMAIL
Joel
I cannot get a message to this [EMAIL PROTECTED]@[EMAIL PROTECTED] mailing list.
Everything I send to debian-user@lists.debian.org bounces.
Please tell me what address you mail postings to to get them
accepted, and please mail me directly at [EMAIL PROTECTED]
Many thanks,
David Teague
I cannot get a message to this [EMAIL PROTECTED]@[EMAIL PROTECTED] mailing
list.
Everything I send to debian-user@lists.debian.org bounces.
No it doesn't. This message appeared on the list.
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST.
Shaul,
You are a frequent poster to this list. Everything I have sent to the
address debian-user@lists.debian.org or [EMAIL PROTECTED] has
bounced the last few days.
I chose one of your messages to r(eply to in hopes that you would look
at my mail headers and tell me what is wrong. I have
Thanks to those who suggested solutions to my difficulties in installing
the *.deb packages for kde. I used the suggestion to get the missing
packages using the suggested ftp search engine and all is running OK now.
Richard
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE
I am looking for a window manager to go with long term. I recently
installed kde and find it quite nice, but I'd like to look at other
options also. I understand the reason why debian has given some
support to gnome and would like to try it when it is reasonably
functional.
So are there current
I just did a clean 1.3.1 install, ran the autoup.sh, and then upgraded
to hamm fully using dselect. The following packages are missing:
Constructing list of files to get...
want: dists/unstable/main/binary-i386/base/sysvinit_2.73-2.deb (69k)
want:
On Sat, 14 Mar 1998, Richard Sevenich wrote:
I am looking for a window manager to go with long term. I recently
installed kde and find it quite nice, but I'd like to look at other
options also. I understand the reason why debian has given some
support to gnome and would like to try it when
Hello,
I did a fresh hamm install using the disk images dated 2.20.98 and the
install seemed to go fine.
I then tried to use the ftp option on deselect Access and got this error:
Can't locate loadable object for module IO in @INC (@INC contains:
/usr/lib/perl5/i386-linux/5.004 /usr/lib/perl5
Hello,
I need to install Bash 2.01 on a Debian 1.3.1 bo-based system.
How safe is it to use bash-2.01 from bo-unstable? Does anyone have had
problems with that?
Thanks for any tip!
Cleto
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble?
On Sat, 14 Mar 1998 02:18:13 PST, wrote:
howdy all.:-)
Just installed Debian linux and win95 on a system and wish to have dual boot
system with LILO as boot manager.
cfdisk shows:
/dev/hda1 Boot Primary Dos FAT16 (has Win95 installed on it)
/dev/hda5 Logical Linux
-BEGIN PGP SIGNED MESSAGE-
On Sat, 14 Mar 1998, Henry Hollenberg wrote:
I did a fresh hamm install using the disk images dated 2.20.98 and the
install seemed to go fine.
I then tried to use the ftp option on deselect Access and got this error:
Can't locate loadable object for
On Sat, 14 Mar 1998, Matt Thompson wrote:
:I just did a clean 1.3.1 install, ran the autoup.sh, and then upgraded
:to hamm fully using dselect. The following packages are missing:
:
:Constructing list of files to get...
:want: dists/unstable/main/binary-i386/base/sysvinit_2.73-2.deb (69k)
:want:
Sorry but, what on earth happened to /dev/hda2, /dev/hda3 and /dev/hda4 ??
and what is the bit about
Install a master boot record on /dev/hada
what is /dev/h[a]da ??, shouldn't that be /dev/hda[X] ?
--Jon.
system with LILO as boot manager.
cfdisk shows:
/dev/hda1 Boot
Henry Hollenberg [EMAIL PROTECTED]
On Sat, 14 Mar 1998, Santiago Vila wrote:
-BEGIN PGP SIGNED MESSAGE-
On Sat, 14 Mar 1998, Henry Hollenberg wrote:
I did a fresh hamm install using the disk images dated 2.20.98 and the
install seemed to go fine.
I then
Matt writes:
I just did a clean 1.3.1 install, ran the autoup.sh, and then upgraded
to hamm fully using dselect. The following packages are missing:
The crash of master seems to have caused a number of packages to vanish
from unstable. Master is back up, but everything isn't repaired yet. It
On Sat, 14 Mar 1998, Henry Hollenberg wrote:
:Hello,
:
:I did a fresh hamm install using the disk images dated 2.20.98 and the
:install seemed to go fine.
:
:I then tried to use the ftp option on deselect Access and got this error:
:
:Can't locate loadable object for module IO in @INC (@INC
Gnome is a desktop environment. It is not a window manager. KDE is not
one either. It includes kwm -- that is the window manager. These two
projects are about a unified look and feel, as well as a programming
standard to help coders. gnome does not have any one particular window
manager
-BEGIN PGP SIGNED MESSAGE-
On Sat, 14 Mar 1998, Henry Hollenberg wrote:
On Sat, 14 Mar 1998, Santiago Vila wrote:
I think this is libnet-perl failure. I would try to execute
/var/lib/dpkg/info/libnet-perl.postinst configure
by hand and see what happens.
[ I also did a
Sorry but, what on earth happened to /dev/hda2, /dev/hda3 and /dev/hda4
??
and what is the bit about
Install a master boot record on /dev/hada
what is /dev/h[a]da ??, shouldn't that be /dev/hda[X] ?
--Jon.
There doesn't need to be hda2, hda3 AND hda4. There does need to be ONE
of
On Sat, 14 Mar 1998, Richard Sevenich wrote:
I am looking for a window manager to go with long term. I recently
installed kde and find it quite nice, but I'd like to look at other
options also. I understand the reason why debian has given some
support to gnome and would like to try it when
Someone responded to me personally:
David Stern, [EMAIL PROTECTED] on 3/14/98 11:44 AM
If you pick the mbr, say goodbye to your win95 bootloader, because lilo
will overwrite the win95 bootloader (you won't be able to boot win95).
Actually, there should be one backup copy to restore from.
1 - 100 of 104 matches
Mail list logo