I have compiled 2.6.13.4 kernel. with stock kernel, the following were
not there. Whether are they necessary. If not how to eliminate them.
ide_generic 1408 0 [permanent]
via82cxxx 12572 0 [permanent]
trm290 4228 0 [permanent]
triflex 384
Antony Gelberg wrote:
> Adam Porter wrote:
>> ~/.mozilla-thunderbird. You can drill down to more specific stuff if
>> you want.
>> Really, you should consider something like Ubuntu, MEPIS, or Xandros.
>> It will take care of many of your problems off-the-bat.
> You seem to have a new standard a
I'm running Debian 3.1 (2.6 kernel) on two remote hosts. I've created
an IPSec VPN with racoon and shorewall and have traffic being
successfully routed between the two hosts over the internet. The
problem I have arises when I try to add compression to the IPSec link.
As far as I've determined, t
Anyone have a Sangoma installed in Debian? I have a couple of boxes that use
CF (compact flash) instead of hard disks that I am trying to develop a Debian
system with Sangoma (A101) support for. It looks like there are no .deb
packages for Sangoma, at least for Sarge.
David Koski
[EMAIL PROTECT
This blazes by so quick in the bootup messages that I can't catch it and
I can't find it in dmesg, etc. It also appears to be preventing me from
using synaptic without using the command line "sudo synaptic".
configuration error - unknown item 'QUOTAS_ENAB' (notify administrator)
configuration erro
It's been a couple days; try updating again. Maybe some bugs snuck in
to the versions you updated to.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I'm having trouble using an external monitor/projector with my Compaq
Presario v2310us [1]. The computer doesn't activate the VGA port when I
do the Function-F4 (monitor switch) thing. If I reboot while the VGA
monitor is attached, then it boots up and runs X mirrored on both the
LCD and the extern
Have you tried "umount -l"?
You might also consider switching that partition to ext3; it might
perform better and help with aMule's freezes.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hey Adam,
You might also consider using p7zip; it gets better compression, and is
like zip in that it stores and compresses at the same time. Windows
version at www.7-zip.org.
Adam
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTE
Try:
apt-get --purge remove webmin webmin-core etc.
And/or:
apt-get --reinstall install webmin webmin-core etc.
apt-get --purge remove webmin webmin-core etc.
One or the combination of those should do it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble
On Fri, Oct 14, 2005 at 10:06:45AM +0100, Jan T. Kim wrote:
> > On 10/13/05, Victor Munoz <[EMAIL PROTECTED]> wrote:
> > >
> > > The 'article' class should be enough, as mentioned in other posts.
> > >
> > > \documentstyle{article}
> > >
>
> Indeed -- use the class, i.e.
>
> \documentclass{ar
Antony Gelberg wrote:
> Adam Porter wrote:
>
>> ~/.mozilla-thunderbird. You can drill down to more specific stuff if
>> you want.
>>
>> Really, you should consider something like Ubuntu, MEPIS, or Xandros.
>> It will take care of many of your problems off-the-bat.
>
>
> You seem to have a new s
On Saturday 15 October 2005 08:50 pm, Marc Shapiro wrote:
> Duncan Anderson wrote:
> > I agree with Rob. Obviously 200 dollars is a neglibible sum if you live
> > in the "first world", but spare a thought for people in places where a
> > P1 with a 1GB hd is something amazing, even with Win98 on it.
Stephen Le wrote:
On 10/16/05, Aurelien Ricard <[EMAIL PROTECTED]> wrote:
Stephen, try to put a telnet session in their ~/.bashrc
I've never tried but it should work.
While this works, it is insecure. A user can easily run a command like
'ssh [EMAIL PROTECTED] rm .bashrc' to delete th
Hi all,
When trying to access a FAT32 directory with aMule it gets frozen during
about 10 minutes. In this period I cannot even umount the partition.
case a)
I just try to access my /alm directory from amule. amule gets frozen 10
minutes and after it continues working normally and I can even
We are sorry, but your e-mail didn't get to the intended recipient. We have
included some information below to help you understand what went wrong.
If you did not send this message, you are being spoofed by an outside entity.
You may ignore this warning and delete it from your in-box.:
Connect
On Sunday 16 October 2005 07:46 pm, Ron Johnson wrote:
> On Sun, 2005-10-16 at 19:24 +0100, marc wrote:
> > marc said...
> >
> > > Sorry for the cheesy question.
> > >
> > > Until now, I've retained Gravity on XP for my usenet use. Now, I'm
> > > after a Linux replacement. I use multiple servers, b
On 2005-10-16 17:17:11 +0200, Lubos Vrbka wrote:
> >That's not quite what he asked, but you can restrict what commands can be
> >run (to just rsync) using the authorized_keys file too
> could you please be more specific in this point? :) some example (or
> pointer to relevant part of a documen
On 2005-10-14 11:08:35 +0600, salahuddin pasha wrote:
> i wanna use debian stable and unstable in same pc.
There aren't many details on what you want exactly, but here's an
example. We had a machine where Debian stable was installed, and
a Debian unstable was installed in /sid for testing purpose.
How do we enable the grammar checker in abiword-2.4?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
* Ron Johnson <[EMAIL PROTECTED]> [2005 Oct 16 18:47 -0500]:
> On Sun, 2005-10-16 at 19:24 +0100, marc wrote:
> > marc said...
> > > Sorry for the cheesy question.
> > >
> > > Until now, I've retained Gravity on XP for my usenet use. Now, I'm after
> > > a Linux replacement. I use multiple server
George McNinch <[EMAIL PROTECTED]> writes:
> gm> On the third, I now have no /dev/sd* at all (no /dev/sda1
> gm> e.g.)
>
> modprobe sd_mod
>
> fixed the problem.
Please share how.
--
Bill Wohler <[EMAIL PROTECTED]> http://www.newt.com/wohler/ GnuPG ID:610BD9AD
Maintainer of c
On Sun, 2005-10-16 at 19:24 +0100, marc wrote:
> marc said...
> > Sorry for the cheesy question.
> >
> > Until now, I've retained Gravity on XP for my usenet use. Now, I'm after
> > a Linux replacement. I use multiple servers, but I'm only interested in
> > text-based ngs, so threading and track
hi ya marc
On Sat, 15 Oct 2005, Marc Dreher wrote:
> after a recent (data) lossy HD crash I decided to build a software raid
> 5 (3 disks)with Debian Sarge (2.6.13 Kernel) to keep that from
> happening again :-)
3 disks in raid5 means 1/3 of the total disk space is not usable
> Works pretty we
On Sun, Oct 16, 2005 at 11:47:18PM +0100, Adam Hardy wrote:
> I've got a really simple backup script which goes like this:
>
> tar -rvf backup$1.tar java/projects
> tar -rvf backup$1.tar .mozilla
> tar -rvf backup$1.tar bin
> echo "compress the whole thing "
> tar -czvf backup$1.gz.tar backup
Joseph Haig wrote:
> --- Oliver Elphick wrote:
>
>
>>On Wed, 2005-10-12 at 10:49 +0100, Joseph Haig wrote:
>>
>>>When upgrading with "apt-get upgrade" I get the option to install a
>>
>>new
>>
>>>configuration file or keep the existing one. The options are
>>>
>>>Y or I : install the packa
I have seen on the net that for some laptops using pcmcia that special
configuration changes must be made in the inclusion or exclusion of port
and/or memory addresses in the config.opts file. I however cannot find
a recipe that will work in my case. Is there some tool that can be used
to find ou
Lars wrote:
> Elimar Riesebieter wrote:
>
>
>>>AFAIK bind8 doesn't support DDNS.
>>>
>>>
>>>
ii bind9-host 9.2.4-1Version of 'host' bundled with BIND 9.X
ii dhcp3-server 3.0.1-2DHCP server for automatic IP address
>>>
>>>
>>>Why do you have different bind versions
I've got a really simple backup script which goes like this:
tar -rvf backup$1.tar java/projects
tar -rvf backup$1.tar .mozilla
tar -rvf backup$1.tar bin
echo "compress the whole thing "
tar -czvf backup$1.gz.tar backup$1.tar
Basically I am using -r (the append option) to backup some direc
On Sun, 16 Oct 2005 19:26:37 +0100
marc considered, crafted and sent:
>|--- The modem on the new laptop is dialing and exchanging with the
ISP.
>|--- Then, 24 times out of 25, all I get is 'NO CARRIER'. Very, very
>|--- occasionally, I connect
>|---
>|--- I've tried both wvdial and KPPP in
Hi !
Since the migration from XF86 to Xorg I had trouble with my screens.
My hw config is as follows :
1 Radeon 7000 VE.
2 Flat panels.
With some work i've been able to get a 3200x1200 virtual desktop but
my second screen remains black. I meani, everything seems to work just
fin
I have just installed awstats and want to add a 'prerotate' to
/etc/logrotate/apache (as /usr/share/doc/awstats/README.Debian suggests).
I have my virtual domains logging to subdirectories of /var/log/apache so the
first line of /etc/logrotate/apache is:
/var/log/apache/*.log /var/log/apache/*/*.
Hello,
my problem is not so difficult to solve I think/hope. I use gkrellm and
I want to use the battery plugin to warn me if my notebookbattery is
running out of power. Therefore I need a command that opens a X-Window
only with a Frame and a Text inside.
How can I do this with X or FVWM
Even More Progress !
[EMAIL PROTECTED] wrote:
... snippage ... Installing Thunderbird ...
>> 2. The second time I opened Thunderbird, it was empty, and the
>> Install Wizard wanted all my data all over again. 150 messages
>> vanished ... but it had let me do the setup all by myself without
>> a
%% marc <[EMAIL PROTECTED]> writes:
m> Sorry for not having responded to this thread yet, but I'm still
m> trying out all the suggestions. I thought that Pan would do, but it
m> has a couple of flaws that I can't live with.
I didn't see the original thread so I don't know if anyone suggeste
David Rothenberger wrote on cygwin:
> Try setting COLUMNS to 79 with the comment "export COLUMNS=79".
> I had this problem when I ran the Cygwin ssh client from bash *in a
> CMD.EXE window*. For some reason, Debian miscalculated the COLUMNS
> size; it was 1 column too large. When I manually set CO
Did someone here succeed installing cinelerra (video editing software)
on debian?
I am running sarge, and am trying to add sid sources to my apt, so as to
be able to install all those dependencies listed in cinelerra's package.
I am following this page:
http://www.ftconsult.com/twiki/bin/view
You want something like rssh:
Description: Restricted shell allowing only scp, sftp, cvs, rsync and/or rdist
rssh is a restricted shell to be used as a substitute of the login
shell to allow users to perform only scp/sftp/cvs/rsync,rdist
operations.
.
The security implications are high, so t
Marc writes:
> Any suggestions on how to improve things?
Run pppconfig as root, answer the questions, and start ppp with 'pon' and
stop it with 'poff'. Post the results and the output of the 'plog'
command. Be precise and complete. Give complete and exact commands and
complete and exact error m
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Elimar Riesebieter wrote:
> AFAIK bind8 doesn't support DDNS.
>
>
>>ii bind9-host 9.2.4-1Version of 'host' bundled with BIND 9.X
>>ii dhcp3-server 3.0.1-2DHCP server for automatic IP address
>
>
> Why do you have different
On Sun, Oct 16, 2005 at 07:24:03PM +0100, marc wrote:
>
> Sorry for not having responded to this thread yet, but I'm still trying
> out all the suggestions. I thought that Pan would do, but it has a
> couple of flaws that I can't live with.
One that hits me is that it seems to retain headers fo
Hello
I am having some trouble trying to fix my system
dependencies.
I know that because disturbing output of the following
two commands which I included at the end of this post.
# apt-get -f install
# apt-cache unmet | grep Depends
I had a working system and all was
good,testing/2.6.13, the pr
On Thu, 2005-10-13 at 08:18 -0700, Freddy Freeloader wrote:
> Hi all,
>
> I downloaded the Advanced Bash Scripting Guide the other day an have
> started to work my way through it. I'm fairly new to bash so I get more
> than a little confused when the output I get is nothing similar to what
> t
Olle Eriksson on 16/10/05 14:25, wrote:
On Friday 14 October 2005 08.18, Joost Kraaijeveld wrote:
Hi,
What is the approriate place to set environmental variables in Gnome,
both system wide (e.g. for all users) and per user?
How about putting them in /etc/profile for system-wide variables an
On Sun, 16 Oct 2005 the mental interface of
Lars told:
> Hi
>
> I'm having difficulty with ddns. I've learned it on Fedora-setup and is
> trying to make it work on Sarge. Found this howto,
> realmtech.net/documents/DynamicDNS.pdf, and i should be using the rigth
> versions;
> fw:/usr/src/linux# d
On 2005-10-16 @ 10:19:05 (week 41) Rodney Richison wrote:
> I would like to make a simple console menu for a script I'm writing.
> While I see things like pdmenu, I'd like this menu to show up on a plain
> vanila new debian base install with now gui. Do you guy's know of some
> simple examples
David R. Litwin:
>
> ake-kpkg --append-to-version "-1-686-smp" --revision
> 2.6.12-1-686-smp--config old configure
> I note that you are using the --revision flag with the value
> 2.6.12-1-686-smp.
> However, the ./debian/changelog file exists, and has a different value
> 2.6.12-1-686.
> I am conf
On Sun, Oct 16, 2005 at 11:28:14AM +0200, Lubos Vrbka wrote:
> hi guys,
>
> is there any way how to disable login to a machine with ssh and at the same
> time use it as a backup machine using rsync over the same protocol (ssh)?
>
> i.e. user can run rsync to that machine, but the login is disall
Rodney Richison wrote:
I would like to make a simple console menu for a script I'm writing.
While I see things like pdmenu, I'd like this menu to show up on a plain
vanila new debian base install with now gui. Do you guy's know of some
simple examples I might look at to accomplish this?
ma
Hi Marc,
> Sorry for the cheesy question.
Is it? =)
> Until now, I've retained Gravity on XP for my usenet use. Now, I'm after
> a Linux replacement. I use multiple servers, but I'm only interested in
> text-based ngs, so threading and tracking threads that I've contributed
> to are important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
I'm having difficulty with ddns. I've learned it on Fedora-setup and is
trying to make it work on Sarge. Found this howto,
realmtech.net/documents/DynamicDNS.pdf, and i should be using the rigth
versions;
fw:/usr/src/linux# dpkg -l |grep 'bind'
ii
Is this a bug? lsmod lists this:
usbcore 121980 1
but it lists no other module as using usbcore -- so what's responsible for
that "1"?
Kernel 2.6.12-1-k7.
--
Carl Fink [EMAIL PROTECTED]
If you attempt to fix something that isn't broken, i
gm> On the third, I now have no /dev/sd* at all (no /dev/sda1
gm> e.g.)
modprobe sd_mod
fixed the problem.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I would like to make a simple console menu for a script I'm writing.
While I see things like pdmenu, I'd like this menu to show up on a plain
vanila new debian base install with now gui. Do you guy's know of some
simple examples I might look at to accomplish this?
--
Highest Regards,
Rodney
That's not quite what he asked, but you can restrict what commands can be
run (to just rsync) using the authorized_keys file too
could you please be more specific in this point? :) some example (or
pointer to relevant part of a documentation) would be very welcome...
also, does this mean,
On 10/16/05, Aurelien Ricard <[EMAIL PROTECTED]> wrote:
> Stephen, try to put a telnet session in their ~/.bashrc
> I've never tried but it should work.
While this works, it is insecure. A user can easily run a command like
'ssh [EMAIL PROTECTED] rm .bashrc' to delete the .bashrc file and get full
On 16/10/05, Aurelien Ricard <[EMAIL PROTECTED]> wrote:
> If you want to be able to login using ssh (or rsync over ssh) on a
> remote machine without password try to put the key of the user's login
> (used on the local machine) to the .ssh/authorized_keys on the remote
> $HOME_DIR.
That's not qui
On Friday 14 October 2005 08.18, Joost Kraaijeveld wrote:
> Hi,
>
> What is the approriate place to set environmental variables in Gnome,
> both system wide (e.g. for all users) and per user?
How about putting them in /etc/profile for system-wide variables and
~/.bash_profile for user specific va
If you want to be able to login using ssh (or rsync over ssh) on a
remote machine without password try to put the key of the user's login
(used on the local machine) to the .ssh/authorized_keys on the remote
$HOME_DIR.
home it helps
Aurélien
Lubos Vrbka wrote:
hi guys,
is there any way
On Fri, Oct 14, 2005 at 07:34:30AM +0100, Joe Mc Cool wrote:
> But, how do I avail of the M$ disk spaces, printers etc ? Is samba
> (under the sarge) the way to go and if so what do I need to know about
> the M$ network in order to proceed ?
Smb4K works beautifully if you're running KDE system.
On 2005-10-15 @ 10:48:55 (week 41) Luk Claes wrote:
> > ich habe linux möchte aber wie mit Delphi
> > Programmieren welche Programmier sprache ist genau so
> > wie Delphi und kann sie bei Linux benutzen währe nett
> > wenn ich eine antwort bekommen würde und wo bekomme
> > ich das programm her und
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
I'm having difficulty with ddns. I've learned it on Fedora-setup and is
trying to make it work on Sarge. Found this howto,
realmtech.net/documents/DynamicDNS.pdf, and i should be using the rigth
versions;
fw:/usr/src/linux# dpkg -l |grep 'bind'
ii
Progress !
[EMAIL PROTECTED] wrote:
... snippage ... Installing Thunderbird ...
> Then a couple of problems surfaced:
>
> 1. The menu items highlight to white on white.
> This is a common bug already posted here before.
> You can check for fixes in the list archives.
I'll try that; the simple an
Wiadomość Oryginalna
Od: Antony Gelberg <[EMAIL PROTECTED]>
Do: [EMAIL PROTECTED]@lists.debian.org
Data: Sat, 15 Oct 2005 20:31:09 +0100
Temat: Re: gmplayer not working
> Enrique Morfin wrote:
> > Hi!
> >
> > I tried to compile mplayer, and it worked. mplayer
> > runs flawlessly. Unfor
On Fri, Oct 14, 2005 at 08:52:35PM -0400, Tong wrote:
> Hi,
Hi,
> Is there any way to list all the packages and their section names?
>
> I tried "dpkg-query -W --showformat '${Package} ${Section}\n'" but not all
> packages are listed. Please help. Thanks
>
> tong
How about aptitude --display-f
Hi all,
I have installed exim4-daemon-heavy on my linux box (Debian Sarge). I
have compiled
my kernel without ipv6 support. (it does not interest to me).
Now when I start exim this messages appear on my log.
2005-08-10 00:00:00 IPv6 socket creation failed: Address family not
supported by proto
hi guys,
is there any way how to disable login to a machine with ssh and at the
same time use it as a backup machine using rsync over the same protocol
(ssh)?
i.e. user can run rsync to that machine, but the login is disallowed?
i've seen similar setup (using rsh) in the past but couldn't fi
theal wrote:
> The /lib directory was deleted by accidentally on one of my
> servers. Does anyone know of a way to recover this?
Your best and simplest option is, of course, to restore your latest
backup. But since you're asking here, I assume that no backup
exists.
I don't think it a good id
Benjamin A'Lee wrote:
On Sat, 2005-10-15 at 08:56 -0700, Stephen Le wrote:
Is it possible to change a user's login shell to an instance of telnet
to a user-unique port? When a user logs into my server, I'd like them
to be immediately dropped into a telnet session on a specific port
running o
Fyi, Adam.
- Forwarded message from Adam Bogacki <[EMAIL PROTECTED]> -
From: Adam Bogacki <[EMAIL PROTECTED]>
To: slug@slug.org.au
Cc: [EMAIL PROTECTED]
Subject: Re: /dev/mouse & /dev/dsp missing!
Mail-Followup-To: slug@slug.org.au, [EMAIL PROTECTED]
X-message-Flag: Don't you wish you wer
Hi,
I booted up my Debian unstable distro today only to find
the cursor static in center of screen and no sound.
Upon checking, the hardware is OK, but I cannot find
/dev/mouse as specified in /etc/X11/xorg.conf and Mplayer gives
me the message
"audio setup: Can't open audio devi
On Sat, 15 Oct 2005 09:48:24 +0200
Francesco Bochicchio <[EMAIL PROTECTED]> wrote:
> :01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8KM266/KL266]
I'm sure someone will correct me if I am wrong, but I don't think there
is any direct rendering support for any of the IGP chipsets f
On Fri, Oct 14, 2005 at 10:35:44AM +0100, Graham Smith wrote:
> Sorry this request for help is a bit off topic for this group but I am really
> stuck and could do with some help. If you can't help but know where I might
> be able to get help I would appreciate a pointer in the right direction.
>
Nice idea, but:
[EMAIL PROTECTED]:~$ ldd `which dpkg`
linux-gate.so.1 => (0xe000)
libc.so.6 => /lib/tls/libc.so.6 (0xb7ea6000)
/lib/ld-linux.so.2 (0xb7feb000)
theal - can you pull the disk? If so, rsync (or cp) /lib from some
other debian box onto it.
On 16/10/05, Ro
74 matches
Mail list logo
