Hello,
Des disque et lecteurs CD qui semblent passer de SCSI (sda) à IDE (hda)
ou qui disparaissent...
Ça ressemble fortement à de la configuration (dans le BIOS) de
contrôleur SATA passé de AHCI ou natif à legacy ou autre
formulation selon le BIOS...
Faut remettre en AHCI.
Bruno
--
KILL
M :
Le 22/02/2012 06:07, Bzzz a écrit :
On Wed, 22 Feb 2012 02:18:11 +0100
Goldy go...@goldenfish.info wrote:
En fait le problème semble venir du devices.map qui liste les disques.
Dans le cas présent j'ai ceci :
(hd0)/dev/disk/by-id/ata-VBOX_HARDDISK_VBee51d3a4-dce5d74a
(hd1)
En meme temps (personnellement … je me couvre :p ) mettre la partoche /boot en
lvm ça sert pas à grand chose … surtout que en général la taille ne bouge pas
vraiment surtout si tu t'en fout des modifs kernel,options de boot etc … bref
tu n'utiliserais pas vraiment les avantages du lvm ...
et
On Wed, 22 Feb 2012 18:07:07 +0100
Goldy go...@goldenfish.info wrote:
Comme je peux finalement me passer de lvm
pour cette config, j'ai fait des tests avec une installation de la
racine directement sur le raid.
? C'est une chose de booter sur /dev/mdN, et une toute autre d'avoir,
ou non, du
Bruno Muller wrote:
Hello,
Des disque et lecteurs CD qui semblent passer de SCSI (sda) à IDE (hda)
ou qui disparaissent...
Ça ressemble fortement à de la configuration (dans le BIOS) de
contrôleur SATA passé de AHCI ou natif à legacy ou autre
formulation selon le BIOS...
Faut remettre en
On Wed, 22 Feb 2012 20:38:17 +0100
Bernard bdebr...@teaser.fr wrote:
SETUP == MAIN == IDE Configuration
Onboard IDE Operate Mode [Enhanced Mode]
(la seule autre option étant : [Compatible Mode]
en mode Compatible, la ligne qui vient après (IDE Port Settings) ne
laisse
Le 22/02/2012 19:39, Florian BLANC a écrit :
En meme temps (personnellement … je me couvre :p ) mettre la partoche /boot
en lvm ça sert pas à grand chose … surtout que en général la taille ne bouge
pas vraiment surtout si tu t'en fout des modifs kernel,options de boot etc …
bref tu
On Wed, 22 Feb 2012 20:59:56 +0100
Goldy go...@goldenfish.info wrote:
Et puis je sais qu'on peut faire plusieurs partitions raid sur un seul
disque, mais je voulais privilégier la facilité de maintenance en
utilisant un disque un volume raid.
IMHO la seule chose à vraiment privilégier ce
Le 22/02/2012 19:48, Bzzz a écrit :
On Wed, 22 Feb 2012 18:07:07 +0100
Goldy go...@goldenfish.info wrote:
Comme je peux finalement me passer de lvm
pour cette config, j'ai fait des tests avec une installation de la
racine directement sur le raid.
? C'est une chose de booter sur /dev/mdN,
On Wed, 22 Feb 2012 21:04:09 +0100
Goldy go...@goldenfish.info wrote:
Pourtant, il est tout à fait possible de booter sur du lvm, dans mon cas
présent, il s'agissait juste de pouvoir booter indépendament sur les
deux disques raid, hors je ne pouvais booter sur depuis le premier mais
pas le
je dirais que grub2 joue un rôle de mini système embarqué avec un module lvm
mais je ne suis pas spécialiste.
ce qui te permet surement de t'élever dans l'abstraction du matériel :)
Le 22 févr. 2012 à 21:04, Goldy a écrit :
Le 22/02/2012 19:48, Bzzz a écrit :
On Wed, 22 Feb 2012 18:07:07
Bzzz wrote:
On Wed, 22 Feb 2012 20:38:17 +0100
Bernard bdebr...@teaser.fr wrote:
SETUP == MAIN == IDE Configuration
Onboard IDE Operate Mode [Enhanced Mode]
(la seule autre option étant : [Compatible Mode]
en mode Compatible, la ligne qui vient après (IDE Port Settings) ne
Bzzz wrote:
On Tue, 21 Feb 2012 21:04:00 +0100
Bernard bdebr...@teaser.fr wrote:
Dans le 'SETUP', au rayon 'BOOT PRIORITY', n'apparaît plus qu'un seul
des deux lecteurs de CD normalement présents, et, lorsque je configure
le système pour booter là dessus et que je mets un CD de
On Wed, 22 Feb 2012 23:26:36 +0100
Bernard bdebr...@teaser.fr wrote:
Il faut que tout intègre SATA, et tester reste innocent: au pire si
tu t'es planté, ça ne boot pas.
En effet, je viens d'essayer l'option P-ATA + S-ATA. Le résultat est le
suivant :
GRUB Loading stage1.5 Read
Le 22/02/2012 21:38, Bzzz a écrit :
On Wed, 22 Feb 2012 20:59:56 +0100
Goldy go...@goldenfish.info wrote:
Et puis je sais qu'on peut faire plusieurs partitions raid sur un seul
disque, mais je voulais privilégier la facilité de maintenance en
utilisant un disque un volume raid.
IMHO la
On Thu, 23 Feb 2012 01:15:38 +0100
Goldy go...@goldenfish.info wrote:
IMHO la seule chose à vraiment privilégier ce sont les données.
Je ne vois pas trop comment on peut sécuriser d'avantage en segmentant
les volumes comme tu le suggères, l'idée étant justement de faire
quelque chose de
Le 23/02/2012 01:35, Bzzz a écrit :
On Thu, 23 Feb 2012 01:15:38 +0100
Goldy go...@goldenfish.info wrote:
IMHO la seule chose à vraiment privilégier ce sont les données.
Je ne vois pas trop comment on peut sécuriser d'avantage en segmentant
les volumes comme tu le suggères, l'idée étant
On Thu, 23 Feb 2012 02:06:26 +0100
Goldy go...@goldenfish.info wrote:
Comme je l'ai dit, dans mon cas c'était juste pour avoir une partition
de swap, mais ce n'est pas obligatoire, ce que je vais faire c'est créer
un fichier de swap dans le cas présent.
Profites-en pour la mettre en RAID0
El 21 de febrero de 2012 10:09, Arianne Valdes Alvarez
avalva...@estudiantes.uci.cu escribió:
Estoy tratando de instalar un servidor ldap(version 2.4) en Debian
pero no puedo añadir los esquemas que necesito, he probado con las siguientes
líneas autenticada como root del sistema:
ldapadd -Y
El Thu, 16 Feb 2012 20:59:48 +0100, Marioca escribió:
Buenas a todos, estoy intentando instalar los drivers para mi tarjeta
gráfica nvidia GFORCE GT520 1G ya que no me reconocen las resoluciones
de pantallla.-
No deberías tener ningún problema con el driver que instala Squeeze
(nouveau).
El Thu, 16 Feb 2012 15:32:03 +0100, Andrés Durán escribió:
El 15/02/2012, a las 15:27, Camaleón escribió:
(...)
¿De donde sacas las 128?
Estoy intentando recompilar un kernel con el valor de esa variable a
128 o 64, en ambos casos la compilación falla... si pongo el valor a
32 se compila
El Fri, 17 Feb 2012 18:57:45 +0100, Javier Silva escribió:
El día 12 de noviembre de 2011 10:36, Camaleón noela...@gmail.com
escribió:
(...)
Gracias :-)
Mi tarjeta es mucho más antigua (x1400) pero no creo que eso sea un
problema. Y también veo en el registro de Xorg lo mismo que tú.
El Sat, 18 Feb 2012 14:51:32 -0600, Mayeli Sanchez escribió:
(ese html...)
El 18 de febrero de 2012 14:39, gerald.lan...@gmail.com escribió:
**
Lo tiene q buscar... Haber digame exactamente q tarjeta d red o sea el
chipset...
Creo
¿Cómo que crees? :-)
Inicia desde una LiveCD y
El Sun, 19 Feb 2012 15:53:06 -0300, Gerardo A. Mirkin escribió:
(ese html...)
Hola,
Tengo una netbook Asus eeepc 1215p. El tema es que con mis manos de oso,
a veces, en lugar de tocar ALT-Tab (la uso para agrandar ventanas
minimizadas en un escritorio) toco la tecla Win (tiene un dibujito de
El Sun, 19 Feb 2012 17:05:21 -0200, ciracusa escribió:
Esto me apareció en los logs de mi apache2 [1].
Alguien sabe que puede ser?
[1] 175.45.25.79 - - [18/Feb/2012:14:56:33 -0300] GET
http://prosiaki.videoswiper.pl/azenv.php HTTP/1.1 404 591
Bueno, un intento de intrusión no se
El Sun, 19 Feb 2012 16:35:12 -0300, Gerardo A. Mirkin escribió:
(ese html...)
Hola,
Corrí rkhunter y aparecen estas líneas que me llevan a sospechar un
malware ¿Es así?
[16:18:40] Warning: The command '/usr/bin/unhide.rb' has been replaced
by a script: /usr/bin/unhide.rb: Ruby script,
El Sun, 19 Feb 2012 17:43:39 -0200, ciracusa escribió:
Viendo los log de mi apache veo unas conexiones desde el host
190.224.235.169
¿Y qué te ha hecho esa IP para que la sometas a un escrutinio de
puertos? :-)
Por loque hago:
# nmap 190.224.235.169
Starting Nmap 5.00 (
El día 22 de febrero de 2012 10:30, Camaleón noela...@gmail.com escribió:
El Thu, 16 Feb 2012 20:59:48 +0100, Marioca escribió:
Buenas a todos, estoy intentando instalar los drivers para mi tarjeta
gráfica nvidia GFORCE GT520 1G ya que no me reconocen las resoluciones
de pantallla.-
No
El Mon, 20 Feb 2012 13:16:48 -0600, Mathdebian escribió:
Tengo un problema al momento de reiniciar mi netbook Acer Aspire One
D257, al parecer queda directa, hace el proceso de reinicio, pero no
vuelve a cargar nada, es decir ni la pantalla donde se ve la marca de la
netbook.
¿Ni si quiera
El Mon, 20 Feb 2012 19:43:34 -0600, Alejandro Perez escribió:
No more debian mailing list
Me temo que así no ;-P
List-Unsubscribe:
mailto:debian-user-spanish-requ...@lists.debian.org?subject=unsubscribe
Saludos,
--
Camaleón
--
To UNSUBSCRIBE, email to
El Tue, 21 Feb 2012 10:16:55 -0500, Lietzan Mota Rosabales escribió:
Original Message
Subject: Postfix
Date: Tue, 21 Feb 2012 09:43:35 -0500
(¿Reenvías?)
Hola a la comunidad de linux:
Soy nuevo en el mundo de linux,mi problema es que al incribirme a la
lista de
El Tue, 21 Feb 2012 08:09:16 -0500, Arianne Valdes Alvarez escribió:
Para la próxima, apunta:
1/ Usar un asunto un poco más específico
2/ No usar html
:-)
Estoy tratando de instalar un servidor ldap(version 2.4) en Debian pero
no puedo añadir los esquemas que necesito, he probado con las
Original Message
Subject: Re: Postfix
Date: Wed, 22 Feb 2012 12:12:17 -0500
From: master mas...@uic.camaguey.cu
To: Lietzan liet...@uic.camaguey.cu
Original Message
Subject: Re: Postfix
Date: Wed, 22 Feb 2012 16:37:27 + (UTC)
From: Camaleón
Tu archivo xorg.conf esta malo. Te recomiendo sigas estos pasos:
1.- Para empezar, instalar nvidia-xconfig. Este paquete sirve para
generar un archivo xorg.conf valido para el driver privativo NVIDIA.
http://packages.debian.org/squeeze/nvidia-xconfig
2.- Luego usa nvidia-settings, este
On Wed, 22 Feb 2012 14:14:44 -0500, Lietzan Mota Rosabales
liet...@uic.camaguey.cu wrote:
Gracias camaleón ,el problema radica en que poseo un dominio con x
cantidad de usuarios y me conecto a mi proveedor de correo mediante
fecthmail,este lo que hace descargar y entregar los mismos al Postfix
El día 22 de febrero de 2012 14:23, Constantino Vargas
consvar...@gmail.com escribió:
Tu archivo xorg.conf esta malo. Te recomiendo sigas estos pasos:
1.- Para empezar, instalar nvidia-xconfig. Este paquete sirve para
generar un archivo xorg.conf valido para el driver privativo NVIDIA.
El Wed, 22 Feb 2012 14:16:47 -0500, Lietzan Mota Rosabales escribió:
O sea como tal no son cuentas independientes sino un buzón general
donde van todos los correos con destino a mi dominio el fecthmail
accede al
mismo
los descarga y los pasa el postfix, los usuarios de correo son los del
Muchas gracias por contestar
El día 22 de febrero de 2012 10:25, Camaleón noela...@gmail.com escribió:
El Mon, 20 Feb 2012 13:16:48 -0600, Mathdebian escribió:
Tengo un problema al momento de reiniciar mi netbook Acer Aspire One
D257, al parecer queda directa, hace el proceso de reinicio,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Buenas noches a todos los listero. Es la primera vez que usa la lista
para pedir algo de guía con este pequeño problema. Sucede que tengo
instalado Debian Wheezy 64 bits y el kernel 3.2.0-1-amd64, todo funciona
perfecto a excepción de este pequeño
El 22/02/12 22:10, Jose Maldonado escribió:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Buenas noches a todos los listero. Es la primera vez que usa la lista
para pedir algo de guía con este pequeño problema. Sucede que tengo
instalado Debian Wheezy 64 bits y el kernel 3.2.0-1-amd64, todo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El 22/02/12 20:52, ElCanu escribió:
El 22/02/12 22:10, Jose Maldonado escribió:
Buenas noches a todos los listero. Es la primera vez que usa la lista
para pedir algo de guía con este pequeño problema. Sucede que tengo
instalado Debian Wheezy 64
Hola,
miren... ya veo la linea de comandos pgsql
pero no puedo instalar pgadmin
me dice q hay una mala definicion del path
gcc
le di yum install gcc
e instalo supuestamente todo lo q es gcc
pero sigue saliendo el error de mala definicion del path de gcc
Gracias
--
Miguel Angeles
Yum??? no deberia ser apt-get o aptitude o dpkg
Saludos
Pablo Zuniga - enviado desde dispositivo movil
El feb 22, 2012 10:59 p.m., Gnuino Angeles gnu...@gmail.com escribió:
Hola,
miren... ya veo la linea de comandos pgsql
pero no puedo instalar pgadmin
me dice q hay una mala definicion del
Hola Jose...
El 22/02/12 22:32, Jose Maldonado escribió:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El 22/02/12 20:52, ElCanu escribió:
El 22/02/12 22:10, Jose Maldonado escribió:
Buenas noches a todos los listero. Es la primera vez que usa la lista
para pedir algo de guía con este pequeño
Hola amigos
En estos dias quería ver una peli por cuevana.tv, resulta que a medida que
carga la peli se llena la partición /tmp hasta que no le cabe mas y por
supuesto no sigue cargando la película o el video, también pasa con
zeitgeist (que a propósito la recomiendo) o en general con cualquier
Lista
Comprei recentemente um notebook e estou querendo transformar a minha
antiga estação de trabalho em um servidor de máquina virtual. Para isso
pretendo utilizar o software Xen. O computador possui uma placa de rede
wireless e esta funcionando corretamente, consigo navegar
On 22 February 2012 09:43, Jason Heeris jason.hee...@gmail.com wrote:
On 21 February 2012 21:07, Tom H tomh0...@gmail.com wrote:
For filesystem UUIDs, I wouldn't use GRUB_DISABLE_LINUX_UUID=true.
I'd change the new flash card's UUIDs with tune2fs and mkswap to match
the copied/cloned
On 21/02/12 15:20, lina wrote:
Hi,
Is it necessary to install the xfce4-power-manager?
I mainly use AC. seldom use battery.
Today went outside, so use the battery.
install the xfce4-power-manager, xfce4-power-manager-plugins and
xfce4-power-manager-data to monitor the battery remaining.
My
On Wed, Feb 22, 2012 at 4:22 PM, Lorenzo Sutton
lorenzofsut...@gmail.com wrote:
On 21/02/12 15:20, lina wrote:
Hi,
Is it necessary to install the xfce4-power-manager?
I mainly use AC. seldom use battery.
Today went outside, so use the battery.
install the xfce4-power-manager,
snip
BTW, which commands can be used to find the battery remainings,
Thanks all,
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
I wouldn't worry about SSD failure. At least, not as much as one usually
worries about HDD failure :)
The guys at hardware.fr did a nice experiment: they set up a computer to do
continuous write-erase cycles on an SSD in order to see how long it would
last, and when performance decreases would
On 22/02/12 01:10, Seb wrote:
I just discovered to my horror /tmp is handled by a tmpfs system that
allocates by default a percentage of RAM that happens to be too small
for my use of /tmp. What is the Debianish way to avoid using this
system for /tmp so that it uses whatever is available on
I just realized that I have been launching X session as root, how to
launch a new X session without using elevated privileges.
--
Kind regards,
Yudi
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Andrei POPESCU wrote:
On Ma, 21 feb 12, 22:58:03, Sian Mountbatten wrote:
It will have Intel Core i5-2400 3.10GHz Socket LGA1155, MSI Z68S REV
B3 motherboard, 8GB DDR3 1600MHz RAM, Nvidia GeForce 8800GT 256MB
PCI-Express graphics, an SSD OCZ Agility 3 120GB 2.5 SATA instead
of a hard disk
On 22/02/12 03:54, Don deJuan wrote:
Since you will not keep this in the public list I will forward your
emails to it.
Please don't, we're not interested. If someone mails you privately with
something you find disagreeable please deal with it yourself.
--
To UNSUBSCRIBE, email to
On Wed, 22 Feb 2012 16:48:47 +0800
lina lina.lastn...@gmail.com wrote:
snip
BTW, which commands can be used to find the battery remainings,
acpi -b
Celejar
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On 22/02/12 05:23, David Christensen wrote:
On 02/21/2012 07:48 AM, lina wrote:
Sorry a bit off-topic, but I am stuck with how to tr
(googled some ways out, still not work)
NELSON ARISPE, EDUARDO ROJAS, AND HARVEY B. POLLARD
into
Nelson Arispe, Eduardo Rojas, and Harvey B. Pollard
I'd use
Sian (and all),
Congratulations on the work you've done with Algol, Literate Programming, and
such! Those are all interests of mine, as well, (Well, from Algol, I
eventually moved on to Pascal, and never really grokked C/C++, although I'm
still making sporadic efforts to learn enough C++ to
Hi there!
I'm trying to configure wlan on my laptop. I've found several guides
on the topic, but all of them require to install non-free software.
[1, 2] I'm looking for a way to make it work without proprietary
software. Someone told me that it's possible with OpenFWWF. [3] But I
have no
Hello,
One of the most frustrating problems which can happen in apache is to
see the error:
server reached MaxClients setting
After it, the server slowly spirals down. Sometimes it mysteriously recovers.
This is difficult to diagnose after the problem appeared and went away.
What have we for
francis picabia:
One of the most frustrating problems which can happen in apache is to
see the error:
server reached MaxClients setting
Well, either you are trying to serve more clients than you have
configured, or whatever is responsible for creating the responses
(application server, CGI
On Wed, Feb 22, 2012 at 07:00:28PM +1000, yudi v wrote:
I just realized that I have been launching X session as root, how to
launch a new X session without using elevated privileges.
Don't login to your shell as root, just as $user,
then it's the same:
startx
./tony
--
On 02/21/2012 09:05 PM, yudi v wrote:
The OP didn't, I think, specify that he wants two X sessions with the
same user.
Yes that is exactly right, I an trying to use two X sessions under one user.
You might want something like this...
In my .bashrcx()
x()
{
D=x
for i in `seq 0
On Mi, 22 feb 12, 16:45:28, Stayvoid wrote:
Hi there!
I'm trying to configure wlan on my laptop. I've found several guides
on the topic, but all of them require to install non-free software.
[1, 2] I'm looking for a way to make it work without proprietary
software. Someone told me that it's
I recently started having the follow occur when I boot into multi-user
mode in stock Debian Squeeze 6.0.4:
[ cut here ]
WARNING: at
/build/buildd-linux-2.6_2.6.32-41-amd64-ReqhZF/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/char/tty_ldisc.c:738
Hi,
My ISP is messing with my bandwith and it is getting lower all the time.
I can find out what it is by killing all apps and use wget to download
something fairly large: currently 110 KB/s. It used to be 600 KB/s.
Is there a tool that will tell me what my max bandwith is at any one moment?
On Wed, 2012-02-22 at 14:05 +, francis picabia wrote:
Hello,
One of the most frustrating problems which can happen in apache is to
see the error:
server reached MaxClients setting
After it, the server slowly spirals down. Sometimes it mysteriously recovers.
This is difficult to
On Wed, Feb 22, 2012 at 01:19, Sian Mountbatten
poenik...@fastmail.co.uk wrote:
Wifi: yes. I do not have broadband. The consultant has a Wifi network which
I can pick up in my living room.
Ah, I did not see this when I wrote my response.
Check on the card/chipset. As I said, drivers can still
What about using the speed test tool at dslreports.com?
https://secure.dslreports.com/speedtest
--b
On Wed, Feb 22, 2012 at 11:25 AM, hvw59601 hvw59...@care2.com wrote:
Hi,
My ISP is messing with my bandwith and it is getting lower all the time.
I can find out what it is by killing all
Moving this to debian-l...@lists.debian.org
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/1329930081.74370.yahoomailclas...@web161704.mail.bf1.yahoo.com
On Tue, Feb 21, 2012 at 09:28:53PM -0600, Stan Hoeppner wrote:
On 2/21/2012 8:51 PM, Robert Holtzman wrote:
Running squeeze 6.04 with Gnome and all updates as of a week ago. At that
time my keyboard became unresponsive.
.snip.
Short of reinstalling, I have no
I recently started having the follow occur when I boot into multi-user
mode in stock Debian Squeeze 6.0.4:
[ cut here ]
WARNING: at
/build/buildd-linux-2.6_2.6.32-41-amd64-ReqhZF/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/char/tty_ldisc.c:738
On Tue, Feb 21, 2012 at 10:44:24PM -0500, Doug wrote:
.snip
Just in case you're running an external keyboard on a laptop, I've found
that doing so, and using a USB adapter to plug it in, makes the k/b work
funny on a cold boot: I have to disconnect and then
hvw59601 wrote at 2012-02-22 10:25 -0600:
Is there a tool that will tell me what my max bandwith is at any one moment?
You can check your system-wide *usage* with iftop or bwm-ng. I do not know
of any package in Debian that automates up/down bandwidth testing. But you
can look at
On Mon, Feb 20, 2012 at 02:19:36PM +, Sian Mountbatten wrote:
Maybe I should keep the keyboard I am using.
It's not overly clean, but I can live with it.
How to clean a dirty (fatty) keyboard:
--
Mix liquid ammonia concentrate (NH4-OH) +
On Tue, Feb 21, 2012 at 10:58:03PM +, Sian Mountbatten wrote:
The computer consultant has actually printed out on a piece of
A5-sized paper just what he's offering. I'm going to ignore the
Intel Core i3-2100 with 4GB DDR3 1333MHz RAM and get the higher
spec. machine.
It will have Intel
An executeable script /home/peter/Desktop/script.sh appears
as an icon in the LXDE desktop. A double-click on it,
starts it executing. In a Fedora system I use, a double
-click on such an icon produces a dialogue offering choices:
[Run in Terminal] [Display] [Cancel] [Run]. I'd guess that
Dom wrote:
I think it would have been nice to have a warning of this change of
behaviour. I have apt-listchanges installed and I'm sure it didn't
notify me of any changes.
These types of changes are discussed in debian-devel. In a released
system they would be in the release notes. But since
On 02/22/2012 12:00 PM, Brad Alexander wrote:
What about using the speed test tool at dslreports.com?
https://secure.dslreports.com/speedtest
--b
On Wed, Feb 22, 2012 at 11:25 AM, hvw59601hvw59...@care2.com wrote:
Hi,
My ISP is messing with my bandwith and it is getting lower all the time.
francis picabia wrote:
One of the most frustrating problems which can happen in apache is to
see the error:
server reached MaxClients setting
Why is it frustrating?
Is that an error? Or is that protection against a denial of service
attack? I think it is protection.
The default for
peasth...@shaw.ca wrote:
An executeable script /home/peter/Desktop/script.sh appears
as an icon in the LXDE desktop. A double-click on it,
starts it executing. In a Fedora system I use, a double
-click on such an icon produces a dialogue offering choices:
[Run in Terminal] [Display] [Cancel]
On Mi, 22 feb 12, 10:23:54, Robert Holtzman wrote:
This is on a desktop. Thanks for the attempt.
It makes sense to try it anyway (it's not obvious from your answer if
you already did).
Kind regards,
Andrei
--
Offtopic discussions among Debian users and developers:
On Mi, 22 feb 12, 10:25:07, hvw59601 wrote:
Is there a tool that will tell me what my max bandwith is at any one moment?
No, you can only measure what is being transfered at any given time, but
this may or may not be the maximum available bandwidth.
Kind regards,
Andrei
--
Offtopic
On 2/22/2012 11:20 AM, Robert Holtzman wrote:
On Tue, Feb 21, 2012 at 09:28:53PM -0600, Stan Hoeppner wrote:
On 2/21/2012 8:51 PM, Robert Holtzman wrote:
Running squeeze 6.04 with Gnome and all updates as of a week ago. At that
time my keyboard became unresponsive.
Publiez votre annonce gratuitement sur:
http://www.annonces-france.org
Merci pour votre confiance.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
I didn't ask for it and I don't want it. So why do we have to have it? It
hogs the CPU and has an enormous database. I certainly do not have enough
file to justify a 60Mb database.
Is it possible to stop it from working in KDE? And what about nepomuk?
I'd like to stop that too. Do I have to
On Wed, Feb 22, 2012 at 5:48 PM, Sian Mountbatten
poenik...@fastmail.co.ukwrote:
I didn't ask for it and I don't want it. So why do we have to have it? It
hogs the CPU and has an enormous database. I certainly do not have enough
file to justify a 60Mb database.
Is it possible to stop it from
Publiez votre annonce gratuitement sur:
http://www.annonces-france.org
Merci pour votre confiance.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
Publiez votre annonce gratuitement sur:
http://www.annonces-france.org
Merci pour votre confiance.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
--- On Wed, 2/22/12, Shaun Jones mister.s.jo...@gmail.com wrote:
In the control panel you can turn it off I believe it was
in the advanced tab.
Yes, one could try to do that but in my case that POS is still running. I tried
to kill it (and I thought I did) but it just won't die! :(
# ps -A
Have you ever wondered how to start getting involved in Debian/Ubuntu?
Do you enjoy discovering new games and playing them? You might want to
come to the games screenshot party! We hope that the party will be a
fun, easy, low-commitment way to get involved.
The Debian/Ubuntu games team is
There's a bit of acronym-soup here, for context check out the
list archives from May 2011.
I had this weird WPA-EAP TTLS problem at that time, and have
now finally gotten it resolved.
The key was to finally run a packet sniffer on the wireless port and
watch the authentication as it
On Wed, Feb 22, 2012 at 3:49 PM, Bob Proulx b...@proulx.com wrote:
francis picabia wrote:
One of the most frustrating problems which can happen in apache is to
see the error:
server reached MaxClients setting
Why is it frustrating?
Yes, maybe you don't know this condition. Suppose you
On Wed, Feb 22, 2012 at 12:39 PM, Karl E. Jorgensen
karl.jorgen...@nice.com wrote:
On Wed, 2012-02-22 at 14:05 +, francis picabia wrote:
Hello,
One of the most frustrating problems which can happen in apache is to
see the error:
server reached MaxClients setting
After it, the server
I didn't ask for it and I don't want it. So why do we have to have it? It
hogs the CPU and has an enormous database. I certainly do not have enough
file to justify a 60Mb database.
Is it possible to stop it from working in KDE? And what about nepomuk?
I'd like to stop that too. Do I have to
On 02/22/2012 05:18 AM, Lorenzo Sutton wrote:
~$ python -c print (' '.join([str.capitalize(x) for x in 'NELSON
ARISPE, EDUARDO ROJAS, AND HARVEY B. POLLARD'.split(' ')]))
Nelson Arispe, Eduardo Rojas, And Harvey B. Pollard
^
I believe the 'A' in and should not be
Don't login to your shell as root, just as $user,
then it's the same:
startx
Ok I cannot launch X session from tty7, default console, as the normal
user. But if I change the allowed_users value in
/etc/X11/Xwrapper.config file from console to anybody, I can
launch it from tty7.
From what I
On 02/22/12 19:15, yudi v wrote:
Don't login to your shell as root, just as $user,
then it's the same:
startx
Ok I cannot launch X session from tty7, default console, as the normal
user. But if I change the allowed_users value in
/etc/X11/Xwrapper.config file from console to anybody, I can
On Wed, 2012-02-22 at 10:49 +0100, Paul van der Vlis wrote:
Hallo,
Hi,
Op een school staat een server met nog Lenny (foei). Hierop wordt o.a.
Joomla gedraaid. Probleem is dat het uploaden van xslx-bestanden (Excel)
niet goed gaat, er verschijnt dan unsupported filetype xslx.
docx (Word)
99 matches
Mail list logo
