Hola,
estic passant-me a us international perquè per programar és molt més
natural, i per què no, els accents i tal sembla que funcionan i no són
excessivament incòmodes.
Concretament, estic fent servir:
setxkbmap -layout us -variant altgr-intl
que per cert, si algú vol fer switch entre
El dia 17 gener de 2014 14.57, Pedro pederi...@gmail.com ha escrit:
Hola,
estic passant-me a us international perquè per programar és molt més
natural, i per què no, els accents i tal sembla que funcionan i no són
excessivament incòmodes.
Concretament, estic fent servir:
setxkbmap
2014-01-17, 14:57 (+0100); Pedro escriu:
estic passant-me a us international perquè per programar és molt més
natural, i per què no, els accents i tal sembla que funcionan i no són
excessivament incòmodes.
Concretament, estic fent servir:
setxkbmap -layout us -variant altgr-intl
que
no em funciona cap opció que comenteu, podeu provar-ho vosaltres? ho
heu fet amb la variant altgr-intl ?
dono més pautes perquè m'ajudeu:
proveu amb aquests layouts, poseu això a terminal:
setxkbmap -option grp:shift_caps_toggle us(altgr-intl),es
setxkbmap -option grp:shift_caps_toggle us,es
2014-01-17, 17:03 (+0100); Pedro escriu:
no em funciona cap opció que comenteu, podeu provar-ho vosaltres? ho
heu fet amb la variant altgr-intl ?
dono més pautes perquè m'ajudeu:
proveu amb aquests layouts, poseu això a terminal:
setxkbmap -option grp:shift_caps_toggle us(altgr-intl),es
2014/1/17 Ernest Adrogué nfdi...@gmail.com:
2014-01-17, 17:03 (+0100); Pedro escriu:
no em funciona cap opció que comenteu, podeu provar-ho vosaltres? ho
heu fet amb la variant altgr-intl ?
dono més pautes perquè m'ajudeu:
proveu amb aquests layouts, poseu això a terminal:
setxkbmap
2014/1/17 Pedro pederi...@gmail.com:
2014/1/17 Ernest Adrogué nfdi...@gmail.com:
2014-01-17, 17:03 (+0100); Pedro escriu:
no em funciona cap opció que comenteu, podeu provar-ho vosaltres? ho
heu fet amb la variant altgr-intl ?
dono més pautes perquè m'ajudeu:
proveu amb aquests layouts,
On Thursday 16 January 2014 11:44:34 Raphael Hertzog wrote:
Bonjour Jean-Philippe,
Bonjour,
On Thu, 16 Jan 2014, Jean-Philippe Garcia Ballester wrote:
Je trouve dommage que cette initiative fort intéressante reste
cloisonnée au monde du logiciel libre et ne mette pas en avant d'autre
Bonjour,
J'ai un laptop à base de processeur Haswell, le circuit vidéo est intégré...
Régulièrement j'ai la trace du noyau suivante :
[34910.661920] [drm:intel_pipe_config_compare] *ERROR* mismatch in
adjusted_mode.flags(DRM_MODE_FLAG_PHSYNC) (expected 1, found 0)
[34910.661923] [
On 01/16/2014 08:21 PM, Stéphane GARGOLY wrote:
Bonjour
Je trouve dommage que cette initiative fort intéressante reste cloisonnée
au monde du logiciel libre et ne mette pas en avant d'autre mouvements
alternatifs (coton biologique, commerce équitable, meilleurs conditions de
travail des
http://www.ryxeo.com/boutique/fr/54-abuledu-live-1108.html
Cordialement,
Valentin
Le 16 janv. 2014 à 23:52, Christophe t...@stuxnet.org a écrit :
Bonsoir,
Le 16/01/2014 21:21, valentin OVD a écrit :
Je n'ai pas le lien la, je vous le donnerai demain. Et pour le 0% de bug,
cela sera dur
Bjr,
voilà j'ai un grand nombre de serveurs DEBIAN membre de Active Directory,
Et depuis quelques jours, j'ai un serveur qui a des pb d'authentification
avec des nouveaux comptes dans l'AD. Les anciens fonctionnent toujours,
mais il ne prend pas les nouveaux.
Apres plusieurs recherche, wbinfo
Bonjour à tous,
Je suis passé à un écran 27 pouces.
Le bureau est centré au milieu, prenant 85% de la taille de l'écran,
laissant 4 bandes noires à chaque bord.
Dommage, car alors autant revenir à l'ancien écran 24 pouces ...
Ma distrib est Wheezy et le bureau KDE.
Carte graphique AMD-ATI.
Le
Bonsoir,
Le 17/01/2014 19:13, valentin OVD a écrit :
http://www.ryxeo.com/boutique/fr/54-abuledu-live-1108.html
Je pense ne pas trop me tromper en disant que pour 1100 € tu as 500 DVD
de la distrib.
@+
Christophe.
--
Lisez la FAQ de la liste avant de poser une question :
Bonjour à tous les utilisateurs et développeurs de Debian :
Le 17/01/2014, valentin OVDvalentin@live.fr a écrit :
http://www.ryxeo.com/boutique/fr/54-abuledu-live-1108.html
En fait, la distribution - à 1152 € et, attention, c'est une promotion
à saisir - pour serveur se trouve à la page
Bonjour,
Je rencontre quelques soucis avec file-roller qui refuse de m'extraire
certains tar.gz (par exemple celui-ci:
http://sourceforge.net/projects/ps3mediaserver/files/latest/download/pms-1.90.1-generic-linux-unix.tar.gz).
Lorsque que je veux extraire il me dit: Erreur lors de la définition
Je reviens sur le sujet parce que je viens de voir que maintenant il y avait
des dépôts pour jessie et sid fournissant la version stable de qgis.
J'ai donc essayé mais malheureusement la version jessie n'a pas les bonnes
dépendances car elle dépend de libgdal1 alors que dans debian jessie c'est
Bonsoir,
Une boutique en ligne co-géré par Debian France - association chargée
de soutenir et de promouvoir le Projet Debian en France - est-elle
l'endroit le plus approprié pour ces genres de militantismes
politiques/sociaux/environnementaux précédemment listés ? :-/
Une question en amenant
Le 18/01/2014 01:25, Antoine a écrit :
Bonsoir,
Une boutique en ligne co-géré par Debian France - association chargée
de soutenir et de promouvoir le Projet Debian en France - est-elle
l'endroit le plus approprié pour ces genres de militantismes
politiques/sociaux/environnementaux précédemment
Le 18/01/2014 01:25, Antoine a écrit :
Une question en amenant une autre : considère-t-on que le principe
central du logiciel libre est de restituer au producteur ses outils ou
bien s'agit il avant tout de mutualiser les compétences de chacun pour
produire un système ultra-compétitif ?
El 16/01/14 18:56, co...@esid.gecgr.co.cu escribió:
Hola
Alguien tiene algun howto o manual para unir un cliente con Debian a un
Dominio con Samba 4??
Salu2
El 13 de enero a las 16:11 hiciste la misma pregunta, y te fue
contestada el 14 a las 10:11.
JAP
--
To UNSUBSCRIBE, email to
El Thu, 16 Jan 2014 15:52:33 -0300, Ariel Martin Bellio escribió:
El 06/09/2013 10:29 a.m., Camaleón escribió:
El Thu, 05 Sep 2013 22:23:48 -0300, Ariel Martin Bellio escribió:
El 05/09/2013 01:25 p.m., Camaleón escribió:
(...)
Me está saliendo un log enorme
Pues igualmente conviene
El Thu, 16 Jan 2014 18:14:50 -0600, Ignacio Sotelo escribió:
(ese html...)
Es aún viable las particiones StegFS para efectos esteganografía? de ser
así alguien tiene experiencia de como hacer una partición de estas en un
USB.
Uf, si lo que dice Wikipedia está vigente, no creo que te sirva de
Gracias por la ayuda, ya hice el script. En /etc/init.d/skeleton hay una
plantilla para crear nuevos scripts de ese tipo, al menos en Ubuntu.
Guiándome por ese y cambiando algunos detalles quedó como se los muestro
debajo. Sólo le veo un problema, y es que cuando ejecuto service
pegotesd start
El Fri, 17 Jan 2014 09:43:32 -0500, juan.mejias escribió:
Gracias por la ayuda, ya hice el script. En /etc/init.d/skeleton hay una
plantilla para crear nuevos scripts de ese tipo, al menos en Ubuntu.
En Debian también existe.
Guiándome por ese y cambiando algunos detalles quedó como se los
Saludos camaleon
Si de hecho uso gpg, openssl y por supuesto trucrypt.
Pero lei sobre esta utileria y pense en hacerle un test.
Enviado desde mi oficina móvil BlackBerry® de Telcel
-Original Message-
From: Camaleón noela...@gmail.com
Date: Fri, 17 Jan 2014 14:32:03
To:
El Fri, 17 Jan 2014 15:08:39 +, ignacio.sotelo escribió:
Si de hecho uso gpg, openssl y por supuesto trucrypt.
Pero lei sobre esta utileria y pense en hacerle un test.
Hay un paquete deb para sistemas de 64 bits en la página del proyecto que
parece ser del año 2010, pero vamos, no lo
El Consejo Científico de la “Universidad de las Ciencias Informáticas” convoca
a los profesionales latinoamericanos a participar en el “V Taller Internacional
de Tecnologías de Software Libre y Código Abierto”, a efectuarse del 24 al 26
de abril de 2014, en La Habana, Cuba. Este taller está
El ene 17, 2014 12:48 a.m., Ariel Martin Bellio sisisi...@yahoo.com.ar
escribió:
El 16/01/2014 11:40 p.m., Roberto Quiñones escribió:
El ene 15, 2014 12:06 p.m., Edward Villarroel (EDD)
edward.villarr...@gmail.com escribió:
puro con poco GNU
Edward Villarroel: @Agentedd
El
El 17/01/14 22:53, Abel García Vitier escribió:
El Consejo Científico de la “Universidad de las Ciencias Informáticas” convoca
a los profesionales latinoamericanos a participar en el “V Taller Internacional
de Tecnologías de Software Libre y Código Abierto”, a efectuarse del 24 al 26
de abril
El día 15 de enero de 2014, 16:41, fernando sainz
fernandojose.sa...@gmail.com escribió:
El 15 de enero de 2014, 20:02, Felix Perez felix.listadeb...@gmail.com
escribió:
El día 15 de enero de 2014, 7:36, fernando sainz
fernandojose.sa...@gmail.com escribió:
El 15 de enero de 2014,
Oi,
Em geral isso tem mais a ver com o tipo de tráfego que será suportado. Se
vc já conhece o padrão, pode sim fazer alguns tunnings.
Ano passado, no FISL, o André apresentou alguns tunnings pra performance em
servidores Debian. Acho que está lá na comunidade debianbr do
softwarelivre.org.
Buenas,
Pelo visto tu vai montar um webserver, tu modificar muitos parametros no
sysctl, como timeout, tamanho dos pacotes...
Outra coisa é montar uma solução de cache usando varnish + nginx, e no
mysql tem que fazer alguns ajustes finos de consumo de memoria, utilização
de cache
Boa Sorte,
Não tenho a minima ideia, pois gostaria de contar com a colaboração de voces
Em 13 de janeiro de 2014 18:47, André Nunes Batista andrenbati...@gmail.com
escreveu:
On Mon, 2014-01-13 at 12:45 -0200, Manoel Pedro de Araújo wrote:
OLá, pessoal gostaria de saber se é seguro instalar o JAVA do
Parece que combinação site do Branco do Brasil + Iceweasel + Icedtea 7
deixou de funcionar (de novo).
Alguém tem informações recentes?
--
Bruno Schneider
http://www.dcc.ufla.br/~bruno/
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe.
Manoel, vou tentar dar uma ajuda. A pergunta é seguro? é muito vaga.
Depende muito do que você quer fazer e quais são os seus riscos.
De um ponto de vista mais paranóico, instalar manualmente diretamente
do site da Oracle já não é seguro.
Mas olhando superficialmente, não há nada de mais no
Olá, preciso sim do java, pois precisa acessar a conta do bb
Em 17 de janeiro de 2014 10:44, Bruno Schneider boschnei...@gmail.comescreveu:
Manoel, vou tentar dar uma ajuda. A pergunta é seguro? é muito vaga.
Depende muito do que você quer fazer e quais são os seus riscos.
De um ponto de
2014/1/17 Manoel Pedro de Araújo escreveu:
Olá, preciso sim do java, pois precisa acessar a conta do bb
Até semana passada eu acessava o site do BB usando OpenJDK, ou seja,
muito provavelmente você não precisa de nada disso que você quer
fazer. Confira na outra discussão que eu iniciei hoje.
--
Se a necessidade é apenas acessar o site do BB, o OpenJDK funciona,
tanto conta pessoa física quanto a conta jurídica, tenho as duas.
Vinicius
Em 17-01-2014 11:53, Bruno Schneider escreveu:
2014/1/17 Manoel Pedro de Araújo escreveu:
Olá, preciso sim do java, pois precisa acessar a conta do
É mesmo... acabei de ver... o java da sun do outro SO autalizou... não
sei se tem relação... ;'(
2014/1/17 Bruno Schneider boschnei...@gmail.com:
Parece que combinação site do Branco do Brasil + Iceweasel + Icedtea 7
deixou de funcionar (de novo).
Alguém tem informações recentes?
--
Bruno
No Banrisul nunca funcionou.
No Brasil para abrir conta em banco é preciso comprovante de renda,
comprovante de residência, cópia de documentos pessoais e kit de
softwares proprietários.
Eu acabo fazendo tudo em caixa eletrônico. Eu não adiciono repositórios
não oficiais e Oracle nem em
Em 17 de janeiro de 2014 12:31, SDeMario sdmi@uol.com.br escreveu:
OpenJDK
Instalei o OpenJDK e nada de funcinar no bb
--
Manoel
Em 17-01-2014 13:33, Jack Jr escreveu:
No Banrisul nunca funcionou.
No Brasil para abrir conta em banco é preciso comprovante de renda,
comprovante de residência, cópia de documentos pessoais e kit de
softwares proprietários.
Eu acabo fazendo tudo em caixa eletrônico. Eu não adiciono
Em 17-01-2014 14:17, Manoel Pedro de Araújo escreveu:
Em 17 de janeiro de 2014 12:31, SDeMario sdmi@uol.com.br
mailto:sdmi@uol.com.br escreveu:
OpenJDK
Instalei o OpenJDK e nada de funcinar no bb
Olá!
Aqui na empresa tudo funciona normalmente para com o Bando do
On Fri, 2014-01-17 at 10:44 -0200, Bruno Schneider wrote:
Manoel, vou tentar dar uma ajuda. A pergunta é seguro? é muito vaga.
Depende muito do que você quer fazer e quais são os seus riscos.
De um ponto de vista mais paranóico, instalar manualmente diretamente
do site da Oracle já não é
existe algum banco que o site funciona sem dar problemas só com software livre?
o meu iceweasel do debian testing e do unstable pararam de funcionar
no bb.com.br
Em 17 de janeiro de 2014 16:51, Linux - Junior Polegato
li...@juniorpolegato.com.br escreveu:
Em 17-01-2014 13:33, Jack Jr escreveu:
On 1/17/14, Ralf Mardorf ralf.mard...@alice-dsl.net wrote:
On Fri, 2014-01-17 at 14:29 +0800, Ma Xiaojun wrote:
Yet another read: http://www.g4ilo.com/linux.html
So what?
I bought a professional sound card, that should work with Linux, but it
doesn't, it does perfectly work on Windows XP.
On Vi, 17 ian 14, 14:29:55, Ma Xiaojun wrote:
Yet another read: http://www.g4ilo.com/linux.html
,
| This software is Windows-only, does not run under wine, and an email to
| the manufacturer asking for details of the communication protocol so I
| could write my own went unanswered. Not the
Ma Xiaojun writes:
Yet another read: http://www.g4ilo.com/linux.html
Awesome! The truth incarnate!
WILMAA! The trashcaan!
That post is about the experience of a single man, the weight against
the whole mankind is about 1.25e-10 to 1.
Has that man the right to use XP? According to
On Thu, Jan 16, 2014 at 4:55 PM, Brian a...@cityscape.co.uk wrote:
On Thu 16 Jan 2014 at 16:02:00 +0100, Stelian Iancu wrote:
I am trying to create a USB stick with Wheezy which would auto-install.
I've managed to create the iso successfully following the instructions
here:
On Thu, Jan 16, 2014 at 6:23 PM, Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
Hi, please see below.
i am the developer of xorriso and always interested
in learning about problems.
However, after writing it to a USB stick, it doesn't boot,
and I don't know why.
What kind of machine
Beste beheerder van http://www.debian.org,
Ik werk op de marketing afdeling van Prosteps en ik ben dagelijks
bezig met het zoeken naar interessante websites om onze site te promoten.
Tijdens mijn dagelijke rondje kkwam ik zojuist uw website http://www.debian.org
tegen.
Omdat onze sites
Den 16. jan. 2014 23:38, skrev Charlie:
[09:28:38] POP3 USER s...@ipstarmail.com.au
Are you sure about using the full email address as username? Maybe you
should just use 'snug' ?
[09:28:39] POP3 PASS
Maybe the server doesn't support unencrypted passwords.
Cheers.
Atle
--
To
On Fri, Jan 17, 2014 at 10:59 AM, Stelian Iancu stel...@iancu.ch wrote:
On Thu, Jan 16, 2014 at 6:23 PM, Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
Hi, please see below.
i am the developer of xorriso and always interested
in learning about problems.
However, after writing it to
Hi,
first question because i am lacking other valid ideas:
Does your machine boot the original netinst ISO from USB stick ?
Second question:
How large is your result image ? Can you upload it to a place
from where i could get it for inspection ?
For the details:
/root/debian/test.iso1 * 1
On Fri, Jan 17, 2014 at 11:53 AM, Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
Hi Thomas,
See my previous mail. Made it work with xorriso 1.3.4. Do you still want me
to go ahead and do what you wrote below?
Thanks!
S.
first question because i am lacking other valid ideas:
Does your
On Fri, 2014-01-17 at 19:13 +1100, Zenaan Harkness wrote:
_Every_ generalisation is _always_ wrong :)
Ok, I agree :). My statements are in a context, so I guess most people
will understand, even if they should disagree.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a
Hi,
In the end, I went ahead and manually compiled xorriso 1.3.4 and with
this one and the command that Debian itself uses to create the
netinst iso it worked (without the jigdo stuff). The resulting iso is
bootable from the USB key.
From my remote position i would say that your firmware
On Fri, Jan 17, 2014 at 12:07 PM, Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
In the end, I went ahead and manually compiled xorriso 1.3.4 and with
this one and the command that Debian itself uses to create the
netinst iso it worked (without the jigdo stuff). The resulting iso is
On Fri, 17 Jan 2014 22:00:50 +1100
Charlie aries...@ipstarmail.com.au wrote:
On Fri, 17 Jan 2014 11:52:18 +0100 Atle Solbakken sent:
Den 16. jan. 2014 23:38, skrev Charlie:
[09:28:38] POP3 USER s...@ipstarmail.com.au
Are you sure about using the full email address as username? Maybe
On Tue, Jan 14, 2014 at 05:42:58PM +, Klaus wrote:
On 14/01/14 11:58, Martin wrote:
Realtek ALC887
Does any of this help:
http://forums.debian.net/viewtopic.php?f=7t=86536 ?
This was helpful Klaus.
After appending a linewith command:
# echo options snd-hda-intel model=generic
On Fri, 2014-01-17 at 10:26 +0100, Gian Uberto Lauri wrote:
In the long term the support he gets from XP could become worse than
the support supplied by GNU/Linux. It does not seem wise to me.
There are some cracked XP and 98 se versions out there, that are as good
as FreeBSD and Linux for
On Fri, 2014-01-17 at 12:13 +0100, Ralf Mardorf wrote:
On Fri, 2014-01-17 at 10:26 +0100, Gian Uberto Lauri wrote:
In the long term the support he gets from XP could become worse than
the support supplied by GNU/Linux. It does not seem wise to me.
There are some cracked XP and 98 se
Hi, I'm trying to enable interrupt remapping and DMA remapping to try and
use PCI passthrough as described here:
http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM
I'm following the guide for rebuilding an official Debian kernel package
(the parts under the Add a patch to linux
Den 17. jan. 2014 12:09, skrev Charlie:
The people at the ISP suggest I try Windows Live mail, recommend it in
fact
They sound really annoying, maybe they're addicted to coffee breaks.
You can check with some other mail client like Thunderbird or Evolution,
and if you still can't log in,
On Fri, 17 Jan 2014 12:28:50 +0100 Atle Solbakken sent:
As you don't have access to the servers, the ISP just has to deal
with this, order them to :)
I'll have to try something because the deal that I signed up with is
null and void if they or Zimbra can't do anything about this problem.
It
Hi,
See my previous mail. Made it work with xorriso 1.3.4. Do you still
want me to go ahead and do what you wrote below?
We could be curious and leave out the options
-eltorito-alt-boot -e boot/grub/efi.img -no-emul-boot -isohybrid-gpt-basdat
If my theory about the need for GPT and EFI is
Ralf Mardorf writes:
On Fri, 2014-01-17 at 10:26 +0100, Gian Uberto Lauri wrote:
In the long term the support he gets from XP could become worse than
the support supplied by GNU/Linux. It does not seem wise to me.
There are some cracked XP and 98 se versions out there, that are as
On Thu, 2014-01-16 at 12:05 -0700, Robert Holtzman wrote:
On Thu, Jan 16, 2014 at 06:58:11PM +0100, Ralf Mardorf wrote:
On Thu, 2014-01-16 at 17:36 +, Iain M Conochie wrote:
Gazing into my crystal ball, there will be a 3D interface that will
blow us all away, and the kids will laugh
Hi,
See my previous mail. Made it work with xorriso 1.3.4. Do you still
want me to go ahead and do what you wrote below?
We could be curious and leave out the options
-eltorito-alt-boot -e boot/grub/efi.img -no-emul-boot -isohybrid-gpt-basdat
Correcting myself:
Option
On Fri, 2014-01-17 at 12:57 +0100, Gian Uberto Lauri wrote:
I heard about some doubts about TrueCrypt...
Encryption doesn't work, when there is already a backdoor before the
encryption takes place. For FLOSS operating systems it's hard to place
such a backdoor, for closed operating systems from
Also, apologies for double posting this, I only just found that the first
time I sent this went through as well :P
On 17 Jan 2014 19:28, Sum Guy enges...@gmail.com wrote:
Hi, I'm trying to enable interrupt remapping and DMA remapping to try and
use PCI passthrough as described here:
On Fri, 2014-01-17 at 13:07 +0100, Ralf Mardorf wrote:
On Thu, 2014-01-16 at 12:05 -0700, Robert Holtzman wrote:
But these, sure as hell, aren't sold in grocery stores.
Correct! And I suspect that it isn't allowed to sell and buy a good
knife in Germany anymore
My father, a gifted
* On 2014 17 Jan 05:15 -0600, Ralf Mardorf wrote:
The advantage of Windows over Debian is hardware support and that more
people get payed for writing software for exotic usages, such as audio
and video editing.
In amateur radio circles there is a constant warning against USB to
serial dongles
Hi
I have installed Debian testing unto a Cubox Pro with the arm (armhf)
architecture and I am running with kernel 3.12.8.
Debian is installed on an external harddrive connected via the upper USB to
the box allowing it to boot of the box.
I have tried getting the disk to spin down when not used
On Thu, 16 Jan 2014 18:58:11 +0100
Ralf Mardorf ralf.mard...@alice-dsl.net wrote:
a good knife isn't produced by a computer controlled
machine, but handcrafted by a craftsman.
But this isn't because a machine can't do the work of a good craftsman
(in some cases today, and in almost any in the
I was given a machine with six scsi drives and I wanted to play around with
RAID setups. The system as given to me was setup with 5 drives in a raid and
one used as /boot. I wanted to use all of them for the raid, so I added a large
ATA drive. On the new drive I made a /boot partition, a swap
Le 16/01/2014 20:06, Sven Joachim a écrit :
On 2014-01-16 19:20 +0100, rudu wrote:
$ dmesg | grep -i failed | tail
[ 16.255858] udevd[1999]: failed to execute
/lib/udev/socket:@/org/freedesktop/hal/udev_event'
socket:@/org/freedesktop/hal/udev_event': No such file or directory
That's
On 2014-01-16 11:41 PM, Ma Xiaojun damage3...@gmail.com wrote:
On Fri, Jan 17, 2014 at 12:33 PM, Bob Proulx b...@proulx.com wrote:
https://en.wikipedia.org/wiki/Adobe_Flash#Vendor_dependence
So you are so freedom loving, why don't you abandon
Flash-using-website altogether?
Is it so hard?
On Fri, Jan 17, 2014 at 1:10 PM, Thomas Schmitt scdbac...@gmx.net wrote:
Hi,
See my previous mail. Made it work with xorriso 1.3.4. Do you still
want me to go ahead and do what you wrote below?
We could be curious and leave out the options
-eltorito-alt-boot -e boot/grub/efi.img
Le 17/01/2014 05:11, Patrick Bartek a écrit :
On Thu, 16 Jan 2014, Andrei POPESCU wrote:
On Jo, 16 ian 14, 09:58:43, Patrick Bartek wrote:
I am using the flashplugin from Debian's nonfree repo. If there are
any security updates for it from Adobe shouldn't those updates
ultimately end up
Sorry for the confusion, http://file indicates the actual URL fo the file.
My simple test script is located at https://raw.github.com/drgdel/a/master/1
Content:
#!/bin/bash
echo Hello World
Preseed entry take 1:
d-i preseed/late_command string in-target wget -O /var/tmp/hello
On 17/01/14 10:47, Martin wrote:
On Tue, Jan 14, 2014 at 05:42:58PM +, Klaus wrote:
On 14/01/14 11:58, Martin wrote:
Realtek ALC887
Does any of this help:
http://forums.debian.net/viewtopic.php?f=7t=86536 ?
This was helpful Klaus.
After appending a linewith command:
# echo options
Hi,
which basically left me with the original command and, surprise, it
worked!
That's quite surprising. There is no corresponding bug fix
to see in my ChangeLog. (... and i cannot remember either ...)
Although xorriso-1.2.2 is outdated, it would still be good to
know how i accidently fixed
On Fri, 17 Jan 2014, Ma Xiaojun wrote:
On Fri, Jan 17, 2014 at 1:42 AM, Patrick Bartek bartek...@yahoo.com
wrote:
My primary browser. Same problem whether using Adobe Flash or
Google's version. In fact, if using Google's, those problem
sites don't even recognize it, and say You need to
On Fri, 2014-01-17 at 07:02 -0600, Nate Bargmann wrote:
I still see the glass as half full
:)
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On Fri, 2014-01-17 at 14:38 +0100, Denis Witt wrote:
Or think about machines in mills, sorting out single grains of poor
quality while they are falling down like a waterfall into the
millstone granting a better flour quality than you can with dozens of
human workers doing the same.
I
On Fri, 17 Jan 2014, François Patte wrote:
Le 17/01/2014 05:11, Patrick Bartek a écrit :
On Thu, 16 Jan 2014, Andrei POPESCU wrote:
On Jo, 16 ian 14, 09:58:43, Patrick Bartek wrote:
[snip]
I was unaware of this. I thought it was the plugin. I have since
read the the Debian
Bob Proulx writes:
The modem I am currently using is a US Robotics 56K modem and
originally probably sold for $70 back in the day. I am looking at a
listing for a good shape US Robotics 56K v.92 modem right now for
$8.00
That got me to thinking. I have a couple of 56-K modems
from
I keep this old stuff in memory of my youth :). I e.g. still own a
Seikosha GP-100VC. Others have their photo albums, I have my antique and
unused computer and audio gear :).
Don't give such oldish gear that you or your family once used away!
OTOH don't collect all oldish gear you see as bulk
Hey,
Have a question that I thought I would post here because I have never done
it before.
I have a buddy that has a system that is in desperate need of a rebuild. It
is truly a Franken-box, with 4 hard drives (2*80GB, 1*160GB, and 1*250GB),
and has an Ubuntu build on it and a Mint build. He
Nobody of your friends has got an external drive for such situations? I
would backup all data temporarily to an external drive. Some time ago I
didn't own such a drive, but after some phone calls one of my friend
lend me a drive he owns just for such situations.
the best approach is to think how
Using the Greek-postfix input method I can type accented characters in
emacs using examples from the input method help like this
o; όy; ύ
So using the keys (on a US-intl-keyboard) Petro;w when this input method
is active I can type Πέτρος.
However I cannot figure out how to type
Le 17/01/2014 19:26, Brad Alexander a écrit :
Hey,
Have a question that I thought I would post here because I have never
done it before.
I have a buddy that has a system that is in desperate need of a rebuild.
It is truly a Franken-box, with 4 hard drives (2*80GB, 1*160GB, and
1*250GB),
On Fri, 2014-01-17 at 19:43 +0100, François Patte wrote:
I suppose that on the 250Gb drive there are only data
I assume that it's a wild mix, regarding to the Franken-box and 80GB
drives. Try to buy a new 80 GB drive ;).
I would backup _everything_ to a new drive and than ... depending to the
Le 17/01/2014 19:44, Johann Spies a écrit :
Using the Greek-postfix input method I can type accented characters in
emacs using examples from the input method help like this
o; όy; ύ
So using the keys (on a US-intl-keyboard) Petro;w when this input
method is active I can type
On Vi, 17 ian 14, 14:02:36, Martin Braun wrote:
This is an output from iotop -o while a disk write occurs:
Total DISK READ : 0.00 B/s | Total DISK WRITE : 0.00 B/s
Actual DISK READ: 0.00 B/s | Actual DISK WRITE: 3.85 B/s
No process is revealed.
How can I figure
On Fri, Jan 17, 2014 at 01:07:55PM +0100, Ralf Mardorf wrote:
On Thu, 2014-01-16 at 12:05 -0700, Robert Holtzman wrote:
On Thu, Jan 16, 2014 at 06:58:11PM +0100, Ralf Mardorf wrote:
On Thu, 2014-01-16 at 17:36 +, Iain M Conochie wrote:
Gazing into my crystal ball, there will be a 3D
Thanks Francois.
Regards
Johann
How do I replicate this line:
deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted
from sources.list in a multistrap.conf? I'm trying this:
[General]
directory=/mnt/install
cleanup=true
arch=amd64
retainsources=/var/cache/apt/archives
noauth=true
unpack=true
retries=5
1 - 100 of 166 matches
Mail list logo