On Tuesday 22 December 2015 21:02:31 John Hasler wrote:
> Gene Heskett writes:
> > In this case, the size of a capacitor hooked to a square wave
> > source, and I want to know how much charge is transfered for every
> > full cycle of the input square wave.
>
> Zero assuming linear source and load
'lut la liste,
Par ce que je suis un poil fainéant, j'ai modifié
org.freedesktop.login1.policy afin d'autoriser n'importe quel
utilisateur à mettre le poste en veille ou à l'éteindre, cela m'évite de
taper le pass de root lorsque j'appuie sur un bouton "mise en veille".
Mais lorsque systemd
On Wed, Dec 23, 2015 at 9:52 AM, David Baron wrote:
> On reboot (to old system or otherwise), the UUID of the target partition was
> CHANGED!
Unlikely, how do you know? What would change them during a reboot?
> If the problem was not hidden behind a screenfull of lvm
Sinon, choix de serveurs WEB :
- Caddy (simple à installer, avec MySQL et php5),
- Nginx (plus rapide qu'Apache).
- Lighttpd (très simpliste).
André
Je prends la discussion en cours de route, donc peut être totalement
HS, mais bon,
perso. sous LINUX je n'ai jamais été déçu par Brother aussi bien laser
que jet d'encre.
je ne sais si ça peut aider, mais bon, voilà c'est dit !
++
C
El mié, 23-12-2015 a las 11:07 +, rjime...@phobos.es escribió:
> Buenos días,
>
> Por error he eliminado el directorio /etc/apt/ con el
> contenido de configuración que había dentro:
> root@thindeb:/etc/apt# pwd
> /etc/apt
> root@thindeb:/etc/apt# ls
> ¿Alguien me podría indicar
On Wed, 23 Dec 2015 05:09:18 -0500
Gene Heskett wrote:
> On Tuesday 22 December 2015 21:02:31 John Hasler wrote:
>
> > Gene Heskett writes:
> > > In this case, the size of a capacitor hooked to a square wave
> > > source, and I want to know how much charge is transfered
On Wednesday 23 December 2015 12:39:18 Anders Andersson wrote:
> On Wed, Dec 23, 2015 at 9:52 AM, David Baron wrote:
> > On reboot (to old system or otherwise), the UUID of the target partition
> > was CHANGED!
>
> Unlikely, how do you know? What would change them during a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, Dec 23, 2015 at 09:49:54AM -0300, Renaud OLGIATI wrote:
> On Wed, 23 Dec 2015 11:11:08 +
> Lisi Reisz wrote:
>
> > On Wednesday 23 December 2015 10:23:41 to...@tuxteam.de wrote:
> > > -BEGIN PGP SIGNED
On Wednesday 23 December 2015 06:47:39 Joe wrote:
> On Wed, 23 Dec 2015 05:09:18 -0500
>
> Gene Heskett wrote:
> > On Tuesday 22 December 2015 21:02:31 John Hasler wrote:
> > > Gene Heskett writes:
> > > > In this case, the size of a capacitor hooked to a square wave
> > >
Bonjour,
>
> 1. Dans ce genre de produit, est-il possible et courant de déconnecter
> le module SFP+ de son câble (en clair, de changer de longueur de câble) ?
Normalement non il s'agit d'un cable "twinax" (deux cable coaxial en 1)
et celui-ci est sertis en usine.
> 2. Comment interconnecte-t-on
On 2015-12-23 at 09:55, Udyant Wig wrote:
> On 12/23/2015 12:15 PM, Sivaram Neelakantan wrote:
>
>> I installed TexLive recently and during one of the upgrades, the
>> entire texdoc package got installed too. that is humoungous and
>> I'd like to remove the doc packages alone and also stop
El Tue, 22 Dec 2015 13:51:34 -0500, listascor...@msjs.co escribió:
> Hola lista
>
> ¿que tal van las causa debianita? ¿bien?... alguien sabe como hacer una
> imagen iso en ¿vivo? a partir de un s.o. instalado (con sus
> configuraciones). El s.o. es debian 9 cifrado.
>
> Remastersys-> no tiene
Hi,
On Wed, Dec 23, 2015 at 10:27:25AM -0500, The Wanderer wrote:
> On 2015-12-23 at 09:55, Udyant Wig wrote:
>
> > On 12/23/2015 12:15 PM, Sivaram Neelakantan wrote:
> >
> >> I installed TexLive recently and during one of the upgrades, the
> >> entire texdoc package got installed too. that
Aviso por si acaso.
Los que tengáis Debian testing con kernel 4.2, si actualizáis al kernel
4.3, tened la precaución de no desinstalar la versión anterior demasiado
pronto.
Ahora, con el kernel 4.3 no consigo apagar o reiniciar el equipo. Se
queda un proceso cerrandose, que no consigo
El Tue, 22 Dec 2015 22:31:37 +0100, Josu Lazkano escribió:
> El día 22 de diciembre de 2015, 15:57, Camaleón
> escribió:
(...)
>>> Sigo investigando.
>>
>> Cuando no lo detecte, ejecútalo a mano "hciconfig hci0 up" a ver qué te
>> dice. Si te devuelve algo del tipo "device
El Tue, 22 Dec 2015 21:36:38 +0100, Alberto C. escribió:
> On Tue, Dec 22, 2015 at 03:39:27PM +0100, Alberto C. wrote:
(...)
>> > La cuenta de correo que quieras usar en Gmail tiene que ser un buzón
>> > real (o un alias a un buzón real, vaya) pero para validarla Gmail
>> > tiene que poder
Hi,
This fixes error in my previous post.
On Wed, Dec 23, 2015 at 10:27:25AM -0500, The Wanderer wrote:
> On 2015-12-23 at 09:55, Udyant Wig wrote:
> > # To prevent these packages from getting installed later:
...
> If that's been changed, or if there's a mechanism which avoids it and
> does
2015-12-22 18:26 GMT-05:00 Debia Linux :
> Que tal lista:
>
> Tengo un pequeño inconveniente. Estoy editando un texto en emacs con
> latext. Por alguna razón que no se cual es, se cerro el archivo y al
> hacer la recuperación del mismo, las letras í (i acentuada) me
>
Maybe you find something among the software listed here:
Wikipedia:WikiProject Electronics/Programs - Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Wikipedia:WikiProject_Electronics/Programs
e.g., Qucs https://en.wikipedia.org/wiki/Quite_Universal_Circuit_Simulator
Regards,
On Wed, 23 Dec 2015 13:33:22 +0100
wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Wed, Dec 23, 2015 at 09:49:54AM -0300, Renaud OLGIATI wrote:
> > On Wed, 23 Dec 2015 11:11:08 +
> > Lisi Reisz wrote:
> >
> > > On Wednesday 23
Bonjour,
Si tu as plusieurs machines executant la meme distribution il est
peut-etre interessant de mettre en place un proxy apt.
Ca evitera de saturer la liaison internet.
Apres, security.debian.org pointe sur au moins 3 serveurs:
dig security.debian.org
; <<>> DiG 9.9.5-9+deb8u3-Debian <<>>
El Tue, 22 Dec 2015 15:30:15 -0500, merlinva2012 escribió:
> Disculpen mis pocos conocimientos, como reflejo ese cambio en fstab
Simplemente tienes que cambiar el identificador antiguo por el nuevo, es
decir:
Antiguo:
# swap was on /dev/sda7 during installation
On Wednesday 23 December 2015 08:49:34 Jörg-Volker Peetz wrote:
> Maybe you find something among the software listed here:
>
> Wikipedia:WikiProject Electronics/Programs - Wikipedia, the free
> encyclopedia
> https://en.wikipedia.org/wiki/Wikipedia:WikiProject_Electronics/Progra
>ms
>
> e.g.,
2015-12-23 6:42 GMT-05:00 Gonzalo Rivero :
> El mié, 23-12-2015 a las 11:07 +, rjime...@phobos.es escribió:
>> Buenos días,
>>
>> Por error he eliminado el directorio /etc/apt/ con el
>> contenido de configuración que había dentro:
>>
At the end, if all methods will fail, you could really try testdisk, it's
free.
You could go for other commercial options too, depending upon the necessity
of the data.
Regards
Himanshu Shekhar
Yes you can mount the single raid1 disk. Your wheezy system should have
recognized your drive as a md device when booted. Run the commend 'cat
/proc/mdstat'. It will show you the current md devices and their status. This
is what I get after connecting a drive to my system over a usb
El Wed, 23 Dec 2015 16:37:49 +0100, Eduardo Rios escribió:
> Aviso por si acaso.
>
> Los que tengáis Debian testing con kernel 4.2, si actualizáis al kernel
> 4.3, tened la precaución de no desinstalar la versión anterior demasiado
> pronto.
>
> Ahora, con el kernel 4.3 no consigo apagar o
On Wed, 23 Dec 2015 13:49:36 +0100
to...@tuxteam.de wrote:
> Now you might want to try
> sudo e2fsck -n /dev/sdi9
Does not like it either:
root@ron:/home/ron # e2fsck -n /dev/sdi9
e2fsck 1.42.5 (29-Jul-2012)
ext2fs_open2: Bad magic number in super-block
e2fsck: Superblock invalid, trying
Bonjour,
depuis plusieurs années déjà, je suis passé à linux et j'en suis satisfait.
J'arrive à réaliser la plupart des tâches courantes (surfer sur le web,
récupérer ses mails, installer/désinstaller des programmes via
l'interface graphique/console...) par contre, je m'interroge
On 12/23/2015 12:15 PM, Sivaram Neelakantan wrote:
>
> I installed TexLive recently and during one of the upgrades, the
> entire texdoc package got installed too. that is humoungous and I'd
> like to remove the doc packages alone and also stop future installs of
> the same type whenever I Upgrade
Gracias Gonzalo, al final descargue el paquete binario y genere un Nuevo
sources.list
saludos
> On 23 dic 2015, at 12:42, Gonzalo Rivero wrote:
>
>> El mié, 23-12-2015 a las 11:07 +, rjime...@phobos.es escribió:
>> Buenos días,
>>
>> Por error he
El Wed, 23 Dec 2015 11:07:55 +, rjimenez escribió:
> Buenos días,
Ese formato...
> Por error he eliminado el directorio /etc/apt/ con
> el contenido de configuración que había dentro:
>
> root@thindeb:/etc/apt#
> pwd /etc/apt
>
> root@thindeb:/etc/apt# ls
>
> ¿Alguien me podría indicar
Bonjour,
pour information, les bonnes pratiques "indenter son code" et
"commenter son code" n'ont strictement rien à voir avec le processus
de compilation des programmes.
Elles n'en présentent pas moins d'intérêt: elles facilitent la bonne
compréhension du code par les humains qui le modifient,
Sorry to drag up this old relic, Steve - did your investigation yield
anything useful?
Mail is a complicated subject so I'm keen to hear about the conclusion of
issues like this.
On 15 December 2015 at 23:14, Lisi Reisz wrote:
> On Tuesday 15 December 2015 19:29:50 Brian
El 23/12/15 a las 19:55, Luis E. Arevalo R. escribió:
El 23 de diciembre de 2015, 12:37, Eduardo Rios > escribió:
Aviso por si acaso.
Los que tengáis Debian testing con kernel 4.2, si actualizáis al
kernel 4.3, tened la precaución de no
moi j'utilise ubuntu et je n'ai pas vraiement de problème à déploré
sachant que je gère des seveurs par contre sous debian et que je joue à
des jeux vidéos (steam) je fais de la bureautique et de la comptabilité
etc
Le 23/12/2015 19:41, maderios a écrit :
On 12/23/2015 07:05 PM,
On Wednesday 23 December 2015 13:15:16 Dan Ritter wrote:
> On Wed, Dec 23, 2015 at 01:12:45PM -0500, Gene Heskett wrote:
> > Is it possible to get a later bison than the 2.5 wheezy uses from a
> > comnpatible repo? Qucs needs 2.6.
>
> It's not in wheezy-backports, and Jessie uses a 3.x version.
>
On 12/23/2015 02:39 AM, Gene Heskett wrote:
Don't have [DC current probe]. Lots of bucks for a good one.
...
Do have [digital sampling oscilloscope], 2 channel gigasampler
How about using a current shunt, and measuring millivolts?
I'll look [up Electric charge on Wikipedia], thanks
El 23/12/15 a las 17:07, Camaleón escribió:
El Wed, 23 Dec 2015 16:37:49 +0100, Eduardo Rios escribió:
Aviso por si acaso.
Los que tengáis Debian testing con kernel 4.2, si actualizáis al kernel
4.3, tened la precaución de no desinstalar la versión anterior demasiado
pronto.
Ahora, con el
> je viens juste d'acheter une imprimante Brother D DP-9020CDW
> Mais galère pour l'installer
http://support.brother.com/g/b/downloadlist.aspx?c=fr=fr=dcp9020cdw_eu=128=English
ce n'est pas celle là ?
PS: Juste avant les 4 erreurs, dans les logs, je vois un message
d'avertissement ou de simple information:
lvm: configuration setting 'activation/thin_check_execution' unkown
Une piste ?
Le 23 décembre 2015 à 19:17, Olivier a écrit :
> Merci beaucoup pour vos suggestions.
>
Le mercredi 23 décembre 2015 à 18:57 +0100, Olivier a écrit :
> Bonjour,
>
> Avec les fêtes de Noël, j'anticipe des demandes du style "mon PC
> (sous Windows) rame, veux-tu regarder ce qui s'y passe ?".
>
>
...
> Qu'en pensez-vous ?
Je vois ce que tu veux dire. A Noël mais les week-ends dans
El 23 de diciembre de 2015, 12:37, Eduardo Rios
escribió:
> Aviso por si acaso.
>
> Los que tengáis Debian testing con kernel 4.2, si actualizáis al kernel
> 4.3, tened la precaución de no desinstalar la versión anterior demasiado
> pronto.
>
> Ahora, con el kernel 4.3 no
David writes:
> So, you want to connect a 120 VAC, 30 A CNC milling machine and a 120
> VAC, unknown current vacuum cleaner to a single 120 V 15 A branch
> circuit.
No. He wants to power a 16A mill. His problem is high inrush on
startup of a DC supply. Soft-start is a reasonable way to solve
Le mercredi 23 décembre 2015, 17:27:06 enae a écrit :
> Bonjour,
>
> depuis plusieurs années déjà, je suis passé à linux et j'en suis satisfait.
>
> J'arrive à réaliser la plupart des tâches courantes (surfer sur le web,
> récupérer ses mails, installer/désinstaller des programmes via
>
El Tue, 22 Dec 2015 17:26:21 -0600, Debia Linux escribió:
> Que tal lista:
>
> Tengo un pequeño inconveniente. Estoy editando un texto en emacs con
> latext. Por alguna razón que no se cual es, se cerro el archivo y al
> hacer la recuperación del mismo, las letras í (i acentuada) me
> apareceina
Bonjour,
Avec les fêtes de Noël, j'anticipe des demandes du style "mon PC (sous
Windows) rame, veux-tu regarder ce qui s'y passe ?".
J'ai bien une solution radicale en tête (passer à Debian) mais je me
demande s'il existe un moyen de mesure objectif, multi-OS si possible, me
permettant par
Greetings all;
Is it possible to get a later bison than the 2.5 wheezy uses from a
comnpatible repo? Qucs needs 2.6.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page
On Wednesday 23 December 2015 13:22:14 David Christensen wrote:
> On 12/23/2015 02:09 AM, Gene Heskett wrote:
> > Ahh, but its being fed to a voltage-doubler with schottky diodes ...
> > The PSU has a quite high
> > capacitance input filter, and without this soft start timed power
> > up, needs a
Gene H writes:
> The only thing I needed an electrician for was to do the drop seal
> break & disconnect, install a heavier drop to the new meterhead, the
> inspector came...
Electricians, permits and inspectors eh? I guess when you have
oppressive government you just have to live with these
Bonjour,
J'ai tenté de mettre à jour une machine de Wheezy à Jessie.
L'opération s'est déroulé sans difficulté apparente sinon qu'au 1er
démarrage, je vois un message du type:
A start job is running for dev-mapper-home (15s/1mn90)
La durée devant la barre oblique jusqu'à atteindre la valeur
Bonjour,
j'utilise quotidiennement de nombreux programmes pour toute tâche.
Après examen de tutoriels, livres de programmations et autres
ressources, je continue de me poser des questions sur le processus de
compilation de programmes.
Certes, le fichier sources est traduit en langage
Bonjour,
Le mercredi 23 décembre 2015, Olivier a écrit...
> A start job is running for dev-mapper-home (15s/1mn90)
> La durée devant la barre oblique jusqu'à atteindre la valeur limite de 90s
> puis je me retrouve avec un prompt de démarrage d'urgence (le terme vient
> de moi) où je dois
On 12/23/2015 02:09 AM, Gene Heskett wrote:
Ahh, but its being fed to a voltage-doubler with schottky diodes ...
The PSU has a quite high
capacitance input filter, and without this soft start timed power up,
needs a 30 amp breaker in the service in order for the breaker to
withstand the power up
On Wednesday 23 December 2015 13:15:16 Dan Ritter wrote:
> On Wed, Dec 23, 2015 at 01:12:45PM -0500, Gene Heskett wrote:
> > Is it possible to get a later bison than the 2.5 wheezy uses from a
> > comnpatible repo? Qucs needs 2.6.
>
> It's not in wheezy-backports, and Jessie uses a 3.x version.
>
Have you looked at the circuit simulator software in the Debian archive
such as geda, ngspice, gnucap, easyspice, fritzing, and octave-ocs?
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
Le 23/12/2015 18:29, Olivier a écrit :
Bonjour,
J'ai tenté de mettre à jour une machine de Wheezy à Jessie.
L'opération s'est déroulé sans difficulté apparente sinon qu'au 1er
démarrage, je vois un message du type:
A start job is running for dev-mapper-home (15s/1mn90)
j'ai eu un message
Merci beaucoup pour vos suggestions.
mon oeil prophane ne voit aucune anomalie dans /etc/fstab.
Dans les logs, je vois l'échec successif des 4 partitions LVM var, usr, tmp
et home avec un message comme
"Timed out for device dev-mapper-vg01\x2dusr.device"
Ces partitions figurent comme ceci dans
On 12/23/2015 07:05 PM, Pascal Obry wrote:
Bonjour
Simple et efficace, toutes les personnes que j'ai migrées dans ma
famille (Ubuntu pas Debian) ne me demande plus rien parce que ça marche
Heu, ubuntu, ça marche jusqu'à un certain point... J'ai tenté sur
plusieurs années dont en 2015
El 23/12/15 a las 19:27, Camaleón escribió:
El Wed, 23 Dec 2015 18:57:23 +0100, Eduardo Rios escribió:
El 23/12/15 a las 17:07, Camaleón escribió:
(...)
Ahora, con el kernel 4.3 no consigo apagar o reiniciar el equipo. Se
queda un proceso cerrandose, que no consigo saber cual es, con una
On Wed, Dec 23, 2015 at 01:12:45PM -0500, Gene Heskett wrote:
> Is it possible to get a later bison than the 2.5 wheezy uses from a
> comnpatible repo? Qucs needs 2.6.
>
It's not in wheezy-backports, and Jessie uses a 3.x version.
Might be time to build your own.
-dsr-
El Wed, 23 Dec 2015 18:57:23 +0100, Eduardo Rios escribió:
> El 23/12/15 a las 17:07, Camaleón escribió:
(...)
>>> Ahora, con el kernel 4.3 no consigo apagar o reiniciar el equipo. Se
>>> queda un proceso cerrandose, que no consigo saber cual es, con una
>>> cuenta de un minuto y medio hacia
Muchas gracias
> El Tue, 22 Dec 2015 15:30:15 -0500, merlinva2012 escribió:
>
>> Disculpen mis pocos conocimientos, como reflejo ese cambio en fstab
>
> Simplemente tienes que cambiar el identificador antiguo por el nuevo, es
> decir:
>
> Antiguo:
>
> # swap was on /dev/sda7 during
Le 23/12/2015 19:05, Pascal Obry a écrit :
Le mercredi 23 décembre 2015 à 18:57 +0100, Olivier a écrit :
Bonjour,
Avec les fêtes de Noël, j'anticipe des demandes du style "mon PC
(sous Windows) rame, veux-tu regarder ce qui s'y passe ?".
...
Qu'en pensez-vous ?
Je vois ce que tu veux
Le mercredi 23 décembre 2015 à 19:17 +0100, Olivier a écrit :
> Merci beaucoup pour vos suggestions.
>
>
> mon oeil prophane ne voit aucune anomalie dans /etc/fstab.
>
> Dans les logs, je vois l'échec successif des 4 partitions LVM var,
> usr, tmp et home avec un message comme
>
> "Timed out
On Wednesday 23 December 2015 20:05:14 Bob Bernstein wrote:
> On Wed, 23 Dec 2015, John Hasler wrote:
> > John "Permits? We don't need no stinkin permits." Hasler
>
> Reminds me of "Don't RTFM! Wing that sucker!"
>
> Haven't heard/seen that in a long time.
>
> And I have to say, this electrical
El 23/12/15 a las 11:07, Eduardo Rios escribió:
>
> Aviso por si acaso.
>
> Los que tengáis Debian testing con kernel 4.2, si actualizáis al
> kernel 4.3, tened la precaución de no desinstalar la versión
> anterior demasiado pronto.
>
> Ahora, con el kernel 4.3 no consigo apagar o reiniciar
The aptitude command line I suggested removed such documentation packages as
texlive-fonts-extra-doc
texlive-fonts-recommended-doc
texlive-latex-extra-doc
apart from the science, pstricks, and pictures doc packages. The language
docs had to be handled specially because of the
Nicolas George wrote:
> Le duodi 2 nivôse, an CCXXIV, Sven Hartge a écrit :
>> And this is why I love the GPT. There is a defined space for the
>> bootloader to be and no nether region of swirly unknowness between the
>> MBR and the start of the first partition.
>> Also this:
On Wednesday 23 December 2015 20:33:57 John Hasler wrote:
> Bob Bernstein writes:
> > And I have to say, this electrical stuff is a lot sexier than poopy
> > linux stuff!
>
> I could bore you to tears in 15 minutes with anecdotes about hospital
> wiring design.
Having read some of the extra's
On Wed, 23 Dec 2015, Gene Heskett wrote:
Try telling that to a couple school bus-loads of 7nth graders.
I am struggling to understand what possible, unholy,
agglomeration of powers and principalities might ever induce me
even to get that close to a couple of 'em! I'll take a pass on
that
On Wed, 23 Dec 2015, John Hasler wrote:
John "Permits? We don't need no stinkin permits." Hasler
Reminds me of "Don't RTFM! Wing that sucker!"
Haven't heard/seen that in a long time.
And I have to say, this electrical stuff is a lot sexier than
poopy linux stuff!
--
Bob Bernstein
On 2015-12-23 at 16:48, Doug wrote:
> On 12/23/2015 01:45 AM, Sivaram Neelakantan wrote:
>
>> I installed TexLive recently and during one of the upgrades, the
>> entire texdoc package got installed too. that is humoungous and
>> I'd like to remove the doc packages alone and also stop future
>>
On 12/22/2015 06:02 PM, John Hasler wrote:
Gene Heskett writes:
In this case, the size of a capacitor hooked to a square wave source,
and I want to know how much charge is transfered for every full cycle
of the input square wave.
Zero assuming linear source and load impedence.
And assuming the
Gary Roach writes:
> And assuming the square wave is symetrical about zero.
The steady-state net charge transferred per cycle will be zero
regardless of waveform. It's a capacitor. No DC component.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
On Wed, 23 Dec 2015, Steve Kleene wrote:
Thank you very much to all of you who posted or wrote with
helpful and useful suggestions.
I think a little acknowledgement of the contribution of those of
us who can no longer be seduced or cajoled into being "helpful
and useful" would be in order.
Bob Bernstein writes:
> And I have to say, this electrical stuff is a lot sexier than poopy
> linux stuff!
I could bore you to tears in 15 minutes with anecdotes about hospital
wiring design.
--
John Hasler
jhas...@newsguy.com
Elmwood, WI USA
Le Mon, 21 Dec 2015 16:22:04 +0100
Jean-Marc a écrit:
> salut la liste,
>
> J'envisage l'achat d'une imprimante.
>
> Un modèle qui me permettrait aussi de scanner mes documents.
> À connecter sur mon réseau domestique.
>
> Vu un post récent relatif à des soucis de
Gene H writes:
> Having read some of the extra's for that, its no wonder the bid
> estimates are 400% of what the takeoff guy totals up.
We had an in-house construction operation for small projects of the sort
I designed. They were mostly pretty good but my biggest problems came
from their
On Wednesday 23 December 2015 21:19:33 John Hasler wrote:
> Gene H writes:
> > Having read some of the extra's for that, its no wonder the bid
> > estimates are 400% of what the takeoff guy totals up.
>
> We had an in-house construction operation for small projects of the
> sort I designed. They
Gene H writes:
> Here in Wv, jumper cables across the meter socket have been a problem,
> so a broken seal on the meters retaining ring is a felony. Its also a
> felony in several other states I have lived and worked in.
Well, sure. When I rewired the farm with buried cable and put in the
new
http://electronics.stackexchange.com/
Hope this helps.
On Wednesday 23 December 2015 19:25:40 John Hasler wrote:
> Gene H writes:
> > Here in Wv, jumper cables across the meter socket have been a
> > problem, so a broken seal on the meters retaining ring is a felony.
> > Its also a felony in several other states I have lived and worked
> > in.
>
>
On Wednesday 23 December 2015 17:57:02 Gary Roach wrote:
> On 12/22/2015 06:02 PM, John Hasler wrote:
> > Gene Heskett writes:
> >> In this case, the size of a capacitor hooked to a square wave
> >> source, and I want to know how much charge is transfered for every
> >> full cycle of the input
On Wednesday 23 December 2015 21:07:34 Bob Bernstein wrote:
> On Wed, 23 Dec 2015, Gene Heskett wrote:
> > Try telling that to a couple school bus-loads of 7nth graders.
>
> I am struggling to understand what possible, unholy,
> agglomeration of powers and principalities might ever induce me
>
On Wednesday 23 December 2015 14:33:39 John Hasler wrote:
> Gene H writes:
> > The only thing I needed an electrician for was to do the drop seal
> > break & disconnect, install a heavier drop to the new meterhead, the
> > inspector came...
>
> Electricians, permits and inspectors eh? I guess
> I don't see Debian doing anything wrong. fdisk showing a 2.3T
> partition I am assuming comes on your Arch Linux disk and is a result
> of it using the wrong block size. I'm not sure if this is due to the
> use of a USB adapter.
>
> mdadm -E /dev/sdb should fail because /dev/sdb is not a RAID
El 23/12/15 a las 21:21, Luis E. Arevalo R. escribió:
El 23 de diciembre de 2015, 17:02, Eduardo Rios > escribió:
Acabo de comprobar que si estando en la sesión gráfica, cierro la
sesión de usuario, y en la pantalla donde aparece el usuario
Bonjour,
Le mercredi 23 décembre 2015, Olivier a écrit...
> mon oeil prophane ne voit aucune anomalie dans /etc/fstab.
> Dans les logs, je vois l'échec successif des 4 partitions LVM var, usr, tmp
> et home avec un message comme
> "Timed out for device dev-mapper-vg01\x2dusr.device"
>
On 12/23/2015 01:45 AM, Sivaram Neelakantan wrote:
I installed TexLive recently and during one of the upgrades, the
entire texdoc package got installed too. that is humoungous and I'd
like to remove the doc packages alone and also stop future installs
of the same type whenever I Upgrade
El 23/12/15 a las 16:37, Eduardo Rios escribió:
Aviso por si acaso.
Los que tengáis Debian testing con kernel 4.2, si actualizáis al kernel
4.3, tened la precaución de no desinstalar la versión anterior demasiado
pronto.
Ahora, con el kernel 4.3 no consigo apagar o reiniciar el equipo. Se
Bonjour,
Le mercredi 23 décembre 2015, Jean-Michel OLTRA a écrit...
> Il me semble bien avoir eu quelque chose comme ça, et j'avais posté sur
> la liste. Tu pourrais rechercher le fil.
https://lists.debian.org/debian-user-french/2015/07/msg00484.html
Mais la mise à jour de lvm2 avait
El 23 de diciembre de 2015, 17:02, Eduardo Rios
escribió:
> Acabo de comprobar que si estando en la sesión gráfica, cierro la sesión
> de usuario, y en la pantalla donde aparece el usuario donde tocar para
> iniciar sesión, apago desde ahí, se apaga sin problemas.
>
> Si
On Wed, 23 Dec 2015 18:55:54 +, Lee Fuller wrote:
> Sorry to drag up this old relic, Steve - did your investigation yield
> anything useful?
>
> Mail is a complicated subject so I'm keen to hear about the conclusion of
> issues like this.
>
> On 15 December 2015 at 23:14,
Yay. Cheers for the info. Sorry I missed the original resolution.
On 23/12/15 20:45, Steve Kleene wrote:
> On Wed, 23 Dec 2015 18:55:54 +, Lee Fuller wrote:
>
>> Sorry to drag up this old relic, Steve - did your investigation yield
>> anything useful?
>>
>> Mail is a
Le 24/12/2015 08:31, Thierry Boibary-Granier a écrit :
et je ne sais pas su on peut acheter des cartouches d'encre autres que
celle que HP préconise.
si. J'en ai trouvé sur price minister, très bon marché et pas mauvaises
du tout
Ceci dit, HP est en générale une très bonne marque
Le Wed, 23 Dec 2015 18:29:44 +0100,
O a écrit :
> Bonjour,
Bien le bonjour
>
> J'ai tenté de mettre à jour une machine de Wheezy à Jessie.
> L'opération s'est déroulé sans difficulté apparente sinon qu'au 1er
> démarrage, je vois un message du type:
> A start job is running for
El día 23 de diciembre de 2015, 16:05, Camaleón escribió:
> El Tue, 22 Dec 2015 22:31:37 +0100, Josu Lazkano escribió:
>
>> El día 22 de diciembre de 2015, 15:57, Camaleón
>> escribió:
>
> (...)
>
Sigo investigando.
>>>
>>> Cuando no lo detecte,
Ayant travaille pour HP, involontairement, après le rachat de
l'entreprise dans laquelle je travaillais, je peux vous dire que son
système de management est américain, que la ou les fonctions auxquelles
on vous affecte ne prenne guère en compte vos desiderata.
La hiérarchie est plus que
1 - 100 of 115 matches
Mail list logo