> Since you have to install the firmware-linux-nonfree that means that
> it s not installed! From what I remember
> you need to select those packages at the end of the base image
> installation.
And you must do an "expert" install, in order to see that option. If you do a
"Standard" install,
bonjour,
je me rends compte que certaines couleurs ne sont plus
adaptées actuellement aux écrans tft et je souhaiterai
voir si une personne charitable pourrais suggérer de
changer la couleur de fond (bleu) de l'installeur vers
une couleur plus douce et moins agressive pour les
yeux ?
merci
On 2020-01-18 19:12 -0500, tom h wrote:
> Recently I have installed stable on a few old optiplex workstations that
> have an AMD graphics card. On first boot I always get a black screen and
> have to:
>
>1. Enable non-free
>2. Install firmware-linux-nonfree. Even though the netinstall
* Rainer Dorsch [20-01/18=Sa 23:38 +0100]:
> ls: cannot access '/home/spatzen/Ablage/': Too many levels of symbolic links
Whenever I've seen this, it's been because some symlink is referring
(possibly indirectly) to itself. So
find ~/Ablage -type l
could be used to find all symlinks, and
Bonjour Basile,
Je ne visais personne en particulier.
Mais parfois certains entrent dans des considérations trop techniques sans
savoir si celui qui pose la question est apte à les recevoir.
Mais tu as tout à fait raison lorsque tu dis que l'utilisateur lambda ne fait
pas ou trop peu de
Στις 2020-01-19 01:17, nektarios έγραψε:
Στις 2020-01-19 00:12, tom h έγραψε:
Hello,
Recently I have installed stable on a few old optiplex workstations
that have an AMD graphics card. On first boot I always get a black
screen and have to:
* Enable non-free
* Install
Hello,
Recently I have installed stable on a few old optiplex workstations that
have an AMD graphics card. On first boot I always get a black screen and
have to:
1. Enable non-free
2. Install firmware-linux-nonfree. Even though the netinstall media is
firmware-10.2.0-amd64-netinst.iso
On 1/18/20 2:32 PM, Darac Marjal wrote:
On 18/01/2020 02:54, Jape Person wrote:
On 1/17/20 7:27 PM, Tom Browder wrote:
I have a laptop, running Debian 10 (Buste) with the Mate desktop.
Unfortunately the laptop doesn't have light indicators on the
keyboard for
keys such as: CapLock, NumLock,
On 1/18/20 1:19 PM, Tom Browder wrote:
On Fri, Jan 17, 2020 at 8:55 PM Jape Person wrote:
I don't know whether or not gkrellm-leds would work for you. Last time I tried
it I found it to look
at little out of place on my Xfce4 desktop, but it did perform some of the
functions you're looking
Hi,
I followed
https://unix.stackexchange.com/questions/467081/sshfs-with-on-demand-mounting/
546102
to automount a directory with sshfs.
I added into /etc/fstab
sshfs#fs:/mnt/disk/data/spatzen /home/spatzen/Ablage fuse
Hi,
jeremy bentham wrote:
> eject: unable to eject, last error: Inappropriate ioctl for device
The inappropriate ioctl() does not necessarily have to be the reason
of the failure. man 1 eject indicates that several methods are tried.
> The command sees the drive (it's not the quietest thing
On Samstag, 18. Januar 2020 21:00:04 CET Rene Engelhard wrote:
> On Sat, Jan 18, 2020 at 06:49:23PM +0100, Rainer Dorsch wrote:
> > is there a way to get the KDE file dialog in libreoffice
> > (buster-backports) ?
>
> >
Olá,
Está aberta a chamada de propostas de atividades para a MiniDebConf
Maceió 2020, que acontecerá de 25 a 28 de março no Laboratório de
Computação Científica e Visualização (LCCV) localizado no Campus A. C.
Simões da Universidade Federal de Alagoas (UFAL).
O envio de propostas pode ser
On 2020-01-18 20:09, Russell L. Harris wrote:
On Sat, Jan 18, 2020 at 07:21:43PM +0100, deloptes wrote:
mick crane wrote:
I scp the files to a temp directory in my home directory on the
server
then ssh into the server, su to root, change the permissions and
ownerships of the files then move
On 2020-01-18, Brian wrote:
> On Sat 18 Jan 2020 at 15:42:08 +0100, Rainer Dorsch wrote:
>
>> I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I
>> get
>> printouts which are mainly white, except the 186x65 mm2.
>>
>> Is there a good way to get it printed in a compact
Using the eject command I get the following message:
eject: unable to eject, last error: Inappropriate ioctl for device
This is new: I used the drive to install the OS (jessie? Debian 9, anyway)
and I've actually--not too recently--listened to a CD on it.
Feeding The Duck the message didn't
The drive also does not respond to the physical control on the
case.
--
Dave Williamsd...@eskimo.com
On Sat 18 Jan 2020 at 15:42:08 +0100, Rainer Dorsch wrote:
> I have a pdf file with a page size of 186x65 mm2. If I
On Sat, Jan 18, 2020 at 07:21:43PM +0100, deloptes wrote:
mick crane wrote:
I scp the files to a temp directory in my home directory on the server
then ssh into the server, su to root, change the permissions and
ownerships of the files then move them to /var/www/html/
for testing I usually
On Sat, Jan 18, 2020 at 06:49:23PM +0100, Rainer Dorsch wrote:
> is there a way to get the KDE file dialog in libreoffice (buster-backports) ?
>
> Installing libreoffice-kde does not seem to be sufficient for me...
On Sat 18 Jan 2020 at 15:42:08 +0100, Rainer Dorsch wrote:
> I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I
> get
> printouts which are mainly white, except the 186x65 mm2.
>
> Is there a good way to get it printed in a compact way (e.g. 4 pages on top
> of
> each
On 18/01/2020 02:54, Jape Person wrote:
> On 1/17/20 7:27 PM, Tom Browder wrote:
>> I have a laptop, running Debian 10 (Buste) with the Mate desktop.
>>
>> Unfortunately the laptop doesn't have light indicators on the
>> keyboard for
>> keys such as: CapLock, NumLock, Insert, etc.
>>
>> Is there
Bonsoir à tous,
Le Libre à l'honneur surtout via FreeCad.
Librement,
Sylvie
Message transféré
Sujet : [EDUC] Fwd: MOOC "Imprimer en 3D" ouvert
Date : Thu, 16 Jan 2020 18:25:27 +0100
De :"d.michon" (d.mic...@laposte.net via educ Mailing List)
Répondre à :
Linux-Fan wrote:
...
> I think the reason for there not being any official Debian instructions on
> this is that there is IMHO very little point in doing anything like a
> "persistent live USB". The advantages of live images are these:
>
> + run off read-only media (less and less needed, but I
mick crane wrote:
> It's a bit convoluted.
> I scp the files to a temp directory in my home directory on the server
> then ssh into the server, su to root, change the permissions and
> ownerships of the files then move them to /var/www/html/
for testing I usually configure something meaningful
On Fri, Jan 17, 2020 at 8:55 PM Jape Person wrote:
> I don't know whether or not gkrellm-leds would work for you. Last time I
> tried it I found it to look
> at little out of place on my Xfce4 desktop, but it did perform some of the
> functions you're looking
> for. (I don't think it had an
On 2020-01-18, Rainer Dorsch wrote:
> Hi,
>
> I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I
> get
> printouts which are mainly white, except the 186x65 mm2.
> Is there a good way to get it printed in a compact way (e.g. 4 pages on top
> of
> each other on an A4
On Sat, Jan 18, 2020 at 3:27 AM Curt wrote:
...
> There's also apparently the 'mate-tweak' package, after installation of which
> (Preferences/Look and Feel/MATE Tweak/Enable keyboard LED).
That worked, at least I can see the position of my Caps Lock key
now--thanks, Curt!
-Tom
On 2020-01-09 06:16, Russell L. Harris wrote:
For development of a web pages, I installed Apache2 on another machine
in the LAN so that I can FTP web pages from the development machine to
the web server and view the pages from the development machine.
But the installation of Apache2 on Buster
Hello,
is there a way to get the KDE file dialog in libreoffice (buster-backports) ?
Installing libreoffice-kde does not seem to be sufficient for me...
Thanks
Rainer
--
Rainer Dorsch
http://bokomoko.de/
Am Samstag, 18. Januar 2020, 16:14:45 CET schrieb David Wright:
> On Sat 18 Jan 2020 at 15:42:08 (+0100), Rainer Dorsch wrote:
> > Hi,
> >
> > I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I
> > get printouts which are mainly white, except the 186x65 mm2.
> >
> > Is
Hi,
17 janv. 2020 à 02:40 de guik...@gmail.com:
> (I edited the > 10-installer> file with the line > kaye ALL=(ALL) NOPASSWD:
> /usr/local/bin/backlight-brightness > but it doesn't have any effect; in fact
> I think sudo was rendered useless to me, as in I cannot execute sudo, it said
>
kaye n writes:
Hello Friends!
Correct me if I'm wrong but there doesn't seem to be an 'official' way of
creating a Live USB Debian that is 'persistent'.
If I google it, I get instructions from other websites, like this one:
[...]
http://cosmolinux.no-ip.org/raconetlinux2/persistence.html
On Sat 18 Jan 2020 at 15:42:08 (+0100), Rainer Dorsch wrote:
> Hi,
>
> I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I
> get
> printouts which are mainly white, except the 186x65 mm2.
>
> Is there a good way to get it printed in a compact way (e.g. 4 pages on top
>
On Sat, 18 Jan 2020 15:42:08 +0100
Rainer Dorsch wrote:
Hello Rainer,
>Is there a good way to get it printed in a compact way (e.g. 4 pages on
>top of each other on an A4 sheet)? I could not find an option in pdftk,
LibreOffice can read pdfs. LibreOffice can also print multiple sheets
per
Rainer Dorsch writes:
Hi,
I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I
get
printouts which are mainly white, except the 186x65 mm2.
Is there a good way to get it printed in a compact way (e.g. 4 pages on top
of
each other on an A4 sheet)? I could not find an
Hi,
I have a pdf file with a page size of 186x65 mm2. If I print that on A4, I get
printouts which are mainly white, except the 186x65 mm2.
Is there a good way to get it printed in a compact way (e.g. 4 pages on top of
each other on an A4 sheet)? I could not find an option in pdftk, so any
Hello Friends!
Correct me if I'm wrong but there doesn't seem to be an 'official' way of
creating a Live USB Debian that is 'persistent'.
If I google it, I get instructions from other websites, like this one:
http://cosmolinux.no-ip.org/raconetlinux2/persistence.html
1. Do you think it's wise
I don't see a vlc-centric email list in the off-topic list so I just asked
in VLC instead.
Thank you for pointing that out for me.
On Sat, Jan 18, 2020 at 8:55 PM songbird wrote:
> kaye n wrote:
> >
> > Hello guys, I just want to ask if this email list is strictly for Debian?
> > Or can one ask
kaye n wrote:
>
> Hello guys, I just want to ask if this email list is strictly for Debian?
> Or can one ask just about anything as long as it's related to GNU/Linux,
> free software, etc?
>
> I'm asking because I can't find what I'm looking for elsewhere. It's about
> VLC player.
>
> No worries
Am Freitag, 17. Januar 2020, 11:12:07 CET schrieb Curt:
> On 2020-01-16, Rainer Dorsch wrote:
> > Am Mittwoch, 15. Januar 2020, 00:09:16 CET schrieb Pascal Hambourg:
> >> Le 14/01/2020 à 21:14, Rainer Dorsch a écrit :
> >> > prepend dhcp6.name-servers 2001:4860:4860::, 2001:4860:4860::8844;
>
On Friday, 17 January 2020 22:54:38 -03 kaye n wrote:
> Hello guys, I just want to ask if this email list is strictly for Debian?
> Or can one ask just about anything as long as it's related to GNU/Linux,
> free software, etc?
>
> I'm asking because I can't find what I'm looking for elsewhere.
On 2020-01-18, Jape Person wrote:
> On 1/17/20 7:27 PM, Tom Browder wrote:
>> I have a laptop, running Debian 10 (Buste) with the Mate desktop.
>>
>> Unfortunately the laptop doesn't have light indicators on the keyboard for
>> keys such as: CapLock, NumLock, Insert, etc.
>>
>> Is there any way
43 matches
Mail list logo