nd. Do you mean to say that the Debian
project was supposing that the larger organisations might want to
operate without security support for a year or two?!
> And I can't account for why you did not know of the Lenny end of support
> date.
My colleagues from a sibling network
for Lenny without an explicit announcement.
--
Arcady Genkin
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/cak7ktt9cdesqnp-cwcv-ssmhpfu7ccydudn3uhbztxuvfpa...@mail.gmail.com
ations out there who
are stuck in the same situation.
I wonder what it would take to make Debian reconsider their decision
with regards to termination of Lenny support, and stick with the
promise from 2009.
[1] http://lists.debian.org/debian-announce/2009/msg9.html
[2] http://www.debian.org
wish
list.
After dealing with all the idiosyncrasies of iSCSI and software RAID
under Linux I am a bit skeptical whether what we are building is going
to actually be better than a black-box fiber-attached RAID solution,
but it surely is cheaper and more expandable.
--
Arcady Genkin
--
To UNSUBSCR
ou get quite a bit of
redundancy from doing the three-way mirroring. You are still
redundant if you loose just one drive, and we are planning to have
about four global hot spares standing by in case a drive fails.
--
Arcady Genkin
--
To UNSUBSCRIBE, email to debian-user-requ...@l
side note for your side note. :))
>From the man page to 'lvcreate' it seems that the -c option sets the
chunk size for something snapshot-related, so it should have no
bearing in our performance testing, which involved no snapshots. Am I
misreading the man page?
Thanks!
--
Arcady
/s
I would still like to know why LVM on top of RAID0 performs so poorly
in our case.
--
Arcady Genkin
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.
=1.0 --chunk=1024 /dev/md{0,5,1,6,2,7,3,8,4,9}
Thanks,
--
Arcady Genkin
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/aanlktilk5for3gq2w9kvajfe7vgzvqmagyjjbkvfl...@mail.gmail.com
to 256
Block device 254:0
Many thanks in advance for any pointers!
--
Arcady Genkin
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/aanlkti
Suppose that I want to (1) specify my own flags to ./configure, and
(2) apply a patch of my own to an app's source tree before the deb
source package builds.
Is this achievable with debian source packages? If yes, any pointers
would be highly appreciated.
Many thanks,
--
Arcady Genkin
Nost
http://http.us.debian.org/debian unstable main contrib non-free
in your /etc/apt/sources.lis, and then:
su
apt-get -b source postgresql
If all goes well, you'll get the .debs of the Postgres 7.0.3, which you
can install with "dpkg -i ...".
--
Arcady Genkin
Nostalgia isn't what it used to be.
enced to all over the documentation...
Thanks for any input,
--
Arcady Genkin
Nostalgia isn't what it used to be.
tek 8139 chip, not via-rhine. The driver is in file rtl8139.c or
some such. I remember that there are actually instructions for
compiling it in the bottom of the file.
Hope this helps,
--
Arcady Genkin
Nostalgia isn't what it used to be.
table. I'm wondering if I can get around that
somehow... Are there apt-able sources for xfree4.0.2? Any other
suggestions?
Many thanks,
--
Arcady Genkin
Nostalgia isn't what it used to be.
;m just starting out with Perl and need 5.6 because that's the
version installed at school.
Many thanks,
--
Arcady Genkin
Don't read everything you believe.
x yet lm_sensors
> doesn't support the chip..so 50C is from the bios)
Hmm... In my case the CPU is barely even warm. It's a PIII-667 (not
overclocked). My questions still stands, though: are there any
utilities for interacting with BIOS for this purpose, anyone?
--
Arcady Genkin
Don't read everything you believe.
are there utilities to do such thing from under Linux?
Many thanks,
--
Arcady Genkin
Don't read everything you believe.
Joey Hess <[EMAIL PROTECTED]> writes:
> Arcady Genkin wrote:
> > Is sftp not available as a Debian package? Couldn't find it in
> > dselect.
>
> [EMAIL PROTECTED]:~>dpkg -p sftp
> Package: sftp
> Priority: optional
> Section: non-US
> Filename: d
d POP3 and IMAP in SSL, FTP is my last worry.
Thanks for any input.
--
Arcady Genkin
Don't read everything you believe.
?
>^^
Thank you, this seems to be the correct syntax. However, strangely
my misspelled version cron.!info works too. ;^)
--
Arcady Genkin
Don't read everything you believe.
uucp and local0 through
|local7.
`
As I wrote in my previous message, ever since I added "cron.!info;" to
the line that pipes to /dev/xconsole, I am not seeing the exim cron
notifications any more.
Thanks,
--
Arcady Genkin
Don't read everything you believe.
rather see. I *ony* wanted to get rid of cron
logging its normal activities.
In case anyone was following, changing the above to the following
solved my problem.
,[ syslog.conf ]
| daemon.*;mail.!*;\
| news.crit;news.err;news.notice;\
| *.=debug;*.=info;\
| cron.!info;
cron.d/exim file.
This would let me turn off or reschedule the exim cron job; but how
would that let me change the logging of its runs?
--
Arcady Genkin
Don't read everything you believe.
the last rule (the one that ends
in "|/dev/xconsole"), but it doesn't do the trick.
Any input greately appreciated!
--
Arcady Genkin
Don't read everything you believe.
I've got this new ASUS CUSL2-C motherboard which supports suspending
to RAM function. In the manual, though, it says that one needs
Windows operating system to do that.
Is there any chance to utilize this functionality with Linux?
Many thanks,
--
Arcady Genkin
Don't read everything you believe.
ne got a better idea ?
What I do is ``chmod -x'' on the unwanted file in /etc/init.d/. This
prevents them from being loaded. Essentially the same thing as you
do, but I think that this way the script is going to be deleted if
the package it belongs to is removed.
--
Arcady Genkin
Don't read everything you believe.
newer?
I used the first patch.
Many thanks,
--
Arcady Genkin
Don't read everything you believe.
egister Mozilla.
All that said, either of the browsers is by no means a finished
product. They are slow, bulky, and buggy. Gotta say that I love
Mozilla's rendering engine + international languages support.
--
Arcady Genkin
Don't read everything you believe.
ons? Could the fact that the whole drive is one
30G ext2fs partition have anything to do with the slowness?
Many thanks for any suggestions,
--
Arcady Genkin
Don't read everything you believe.
lso, it seems
strange that there seems to be no way to override the setting with a
command-line parameter. All I needed was to print two legal-sized
pages, and then go back to letter-sized...
In any case, thanks for your reply!
--
Arcady Genkin
Don't read everything you believe.
nderstanding is that lpr does not understand that the document is
formatted for legal paper. I have HP DeskJet 697 for a printer and I
use it with magicfilter, modified to use hpdj driver.
I'm lacking clue as to how to remedy or debug the problem; would
anyone please help?
Many thanks,
--
the Joliet support. I had it compiled as a
module, and somehow it went missing. After I recompiled the modules,
all is good.
Thanks to everyone who answered!
--
Arcady Genkin
Don't read everything you believe.
. Any idea what went wrong all of a sudden?
,[ /etc/fstab ]
| /dev/cdrom /cdrom iso9660 defaults,ro,user,noauto 0 0
`
Many thanks,
--
Arcady Genkin
Don't read everything you believe.
reader the new messages are not bolded. The Inbox
word is bolded and shows 4 new messages, but in the mailbox summary
panel there is no indication as to what messages are unread.
Many thanks
--
Arcady Genkin
Don't read everything you believe.
t don't have the Perl Tk module installed. Try
> apt-get install perl-tk
Walt, thanks for your reply, but I do have perl-tk installed. It is
clear from the error message that the problem is version mismatch or
something of that sort.
Any further ideas?
Many thanks,
--
Arcady Genkin
Don't read everything you believe.
know very much about perl internals. How can I fight this?
Thanks for any input,
--
Arcady Genkin
Don't read everything you believe.
Every time I post to this list I get at least three bounces saying
that this or that user's mailbox is full and the message could not be
delivered.
Is this a list misconfiguration (which should be reported as a bug) or
can I configure something on my side not to get those messages?
--
A
TICAST MTU:1500 Metric:1
> > | RX packets:448934 errors:0 dropped:0 overruns:0 frame:0
> > | TX packets:266302 errors:0 dropped:0 overruns:0 carrier:0
> > | collisions:7766 txqueuelen:100
> > | Interrupt:10 Base address:0xe800
> > `
--
Arcady Genkin
Don't read everything you believe.
euelen:100
| Interrupt:10 Base address:0xe800
`
Thanks!
--
Arcady Genkin
Don't read everything you believe.
e could I get its source code?
Or would anyone tell me if there is a system call or C function to get
the percentage of time the CPU has been idle?
Thanks!
--
Arcady Genkin
Don't read everything you believe.
e last process to run, here corresponding to a 'cat'
> process.
Right. But those are *average* values. I'd like to be able to read
real-time CPU load info. For instance, if I run a CPU-intensive
process, the value in /proc/loadavg will change very slowly. I need
to be able to read t
How would I get a real-time CPU load information? I found
/proc/loadavg, but that's not what I need, since it only gives average
load values.
Thanks!
--
Arcady Genkin
Don't read everything you believe.
hda3 resolved
the situation!
Thanks again,
--
Arcady Genkin
Don't read everything you believe.
oot time, and boots linux just fine. If I choose
`win', then it attempts to boot Win, but I see a message:
`NTLDR is missing. Press Cntrl+Alt+Delete.'
win2k *is* on /dev/hda1, which I verified with fdisk just now.
I tried removing the `table=/dev/hda' option, but it made no
diff
Just as a follow-up to myself, in case it matters, the partition where
win2k is installed is in NTFS.
--
Arcady Genkin
Don't read everything you believe.
he only optoin is C-A-Del.
Is there a clean solution to this problem? Will I have to reinstall
Win2K since I hosed its MBR?
Thanks for any pointers,
--
Arcady Genkin
Don't read everything you believe.
it worked fine.
>
> (for i in `ls`; do echo -n "$i: "; procmail < $i && rm $i; echo "done.";
> done) > ../log 2>&1 &
Not to say that this is the cause of slowness, but you may still want
to change the `ls` to *. This will save running ls, and opening and
closing a pipe:
for i in *; do
...
--
Arcady Genkin
Don't read everything you believe.
by deleting them or
archive them by moving somewhere else?
Thanks!
--
Arcady Genkin
Don't read everything you believe.
e messages older than a specified date.
2. Move messages older than a specified date (i.e. archive them
away).
Thanks for any pointers!
--
Arcady Genkin
Don't read everything you believe.
What alternatives to fdisk are there? I remember I used one once, but
shoot me if I remember the name. ;^)
Thanks,
--
Arcady Genkin
Thanks God I'm still an atheist! -- Luis Bunuel
---[ dmesg ]
| Partition check:
| hdc: hdc1 hdc2 < hdc5 hdc6 > hdc3 hdc4
`
,[ mount ]
| /dev/hdc1 on /mnt/hdc1 type ext2 (rw)
| /dev/hdc4 on /mnt/hdc4 type ext2 (rw)
| /dev/hdc6 on /mnt/hdc6 type ext2 (rw)
| /dev/hdc5 on /mnt/hdc5 type ext2 (rw)
`
--
Arcady Genkin
Thanks God I'm still an atheist! -- Luis Bunuel
n-free
| # deb ftp://ftp.netgod.net/debian potato contrib main non-free
|
| deb http://spidermonkey.helixcode.com/distributions/debian unstable main
`
Thanks!
--
Arcady Genkin
Thanks God I'm still an atheist! -- Luis Bunuel
and after a quick look into the
documentation it seems like the kind of thing I was looking for.
--
Arcady Genkin
Thanks God I'm still an atheist! -- Luis Bunuel
Are there any good tools for writing man pages other than troff?
Thanks for any info!
--
Arcady Genkin
Thanks God I'm still an atheist! -- Luis Bunuel
to how many desktop computers run Linux nowadays.
Is anyone aware of any surveys on this subject?
Thanks!
--
Arcady Genkin
Thanks God I'm still an atheist! -- Luis Bunuel
I'm trying to switch off modem sound when connecting to the ppp
service provider, but can't seem to find a place to stick in M0 in the
dial string... Is there a standard way of doing it?
Thanks!
--
Arcady Genkin http://www.thpoon.com
Thanks God I&
Jay Kelly <[EMAIL PROTECTED]> writes:
> addresses but not others. For example when I try to mail
> [EMAIL PROTECTED] I receive an error "Host not found" but I can
> mail other email addresses.
> any thoughts will help
It's @lists.debian.org (note the `s' in
e this happening again?
Thanks for any ideas!
--
Arcady Genkin
Nostalgia isn't what it used to be.
this list.
Because they are evil and some RFCs prohibit them. ;^)
--
Arcady Genkin
Nostalgia isn't what it used to be.
Is there a free tool to draw E-R diagrams out there?
Thanks!
--
Arcady Genkin
Nostalgia isn't what it used to be.
martin <[EMAIL PROTECTED]> writes:
> short question: does anyone know of a php3 mode for xemacs?
>
> developing php3 in html-mode is sort of annoying :-)
http://www.cs.huji.ac.il/~baryudin/php3_mode.html
--
Arcady Genkin http://www.thpoon.com
-wm instead of gnome-session.
Honestly, I can think of little use for session management, but that's
not the main point...
I wonder what that port 16001 thingy is.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
s stock Potato with gnome
and the rest installed by apt.
On another note, is gnome-panel an application? I.e. should there be
an executable with name "gnome-panel"? I installed the gnome-panel
package, but the executable with this name is nowhere to be found.
Thanks!
--
Arcady Genkin
packages, which are
installed by default.
Apart from those, all went very smooth.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
gt; > the system.
>
> How about downloading base2_1.tgz (or base2_2.tgz if you want to go
> straight to frozen) and untarring that into the new partition before
> chrooting into it?
Excellent! Worked like a charm, thanks a lot! The install was quick
and enjoyable. ;^)
--
Arc
menus Options->Manage Packages.
Apart from that, I find the following in my .emacs:
(autoload 'html-mode "psgml-html" "Load psgml-html-mode" t)
(add-hook 'html-mode-hook 'hm--html-minor-mod)
HTH
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
off a
floppy).
Is it possible to simply mount whatever floppy image I need off
/dev/fd0 and run the installation program?
If so, what is the program's name?
If anyone has had experience with doing this, I would appreciate any
suggestions.
--
Arcady Genkin
/diagnostics programs on the cards and check
that they are both switched to the right medium and pass tests.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
Carel Fellinger <[EMAIL PROTECTED]> writes:
> On Fri, Apr 21, 2000 at 07:26:15PM -0400, Arcady Genkin wrote:
>
> > Eventually the CD-ROM extracts everything perfectly, but those ":-|"
> > have been annoying me. I have a feeling that the CDROM's firmware
&g
"Stephan Hachinger" <[EMAIL PROTECTED]> writes:
> /bin/sh: /dev/null: Permission denied
Well, have you actually looked what the permissions to /dev/null look
like? "ls -l /dev/null".
They should be crw-rw-rw- root.root.
--
Arcady Genkin
t;OSS driver" to
"Disk writer" or something of that sort.
p.s. Please post in plain text and wrap your lines at 72 characters.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
couldn't start daemon
`
I have a feeling that the problem lies with some networking issue
(since the *connection* is refused). Which is kinda weird, since these
are all local printers.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
l#66:px#1440:mx#0:\
| :if=/etc/hpdj/hpdj-normal:\
| :af=/var/log/lp-acct:lf=/var/log/lp-errs:
|
| lp3|HP Deskjet 697c Best:\
| :lp=/dev/lp0:sd=/var/spool/lpd/lp3:\
| :sh:pw#80:pl#66:px#1440:mx#0:\
| :if=/etc/hpdj/hpdj-best:\
| :af=/var/log/lp-acct:lf=/var/log/lp
Has anyone had experience with both of these filter packages? What are
the notable differences?
On another note, I wonder why neither of them seems to support hpdj
driver by default...
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
s a utility that splits a file into two pipes, but I'll be
damned if I can remember how it's called. Anyone?
Other than that, can't you just write a very simple shell script (like
another follow-up suggests)?
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
isk itself is bad.
So I have heard, and that's why I have chosen Plextor over others.
Thanks for your reply.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
nder Linux).
I'll be very greatful for any suggestions and ideas!
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
efine `jitter' as applicable to a CD-ROM? (or direct me to
a resource where it's explained)
I'm thinking of contacting Plextor tech. support about it, so I want
to reas something on the topic before I do that.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
wngrade with or
> > are they archived on the debian site somewhere ?
Instead, you might want to do "apt-get update", and then "apt-get
upgrade". This will upgrade you to 1.6.11, which works.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
.
If yes, how do I create fonts.dir for them? `mkfontdir' expects pcf,
cnf, or bfd extensions.
Thanks!
--
Arcady Genkin
Nostalgia isn't what it used to be.
the trick. Note: it will only change the extensions,
i.e. THIS.TTF will become THIS.ttf.
--
Arcady Genkin
Nostalgia isn't what it used to be.
.
| default-resolutions = 75,75,100,100
| deferglyphs = all
|
| # font cache control, specified in KB
| cache-hi-mark = 2048
| cache-low-mark = 1433
`
Thanks for any input!
--
Arcady Genkin
Nostalgia isn't what it used to be.
i/xtt/#perlftlib, but it won't
compile... and mkttfdir.pl doesn't work, saying mkttfdir.pl doesn't
exist. ;^(
Another question: Once I create fonts.dir, are there any other steps
to configure the font server to use the ttf fonts?
Thanks a lot for any inpu
What package is `play' program is in?
Thanks!
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
Arcady Genkin <[EMAIL PROTECTED]> writes:
Please never mind my previous message. All workes fine after I added
routing info for 192.168.2.0 to the firewall's routing table.
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
do I want to do with my Debian box so that the
> > laptop could talk to the 'net? As far as I understand, I just need to
> > configure it a router (to route all traffict from 192.168.2.2 through
> > 192.168.1.1), correct?
> >
> > Also, will I
so, will I need to modify anything on my firewall? Do I need to add
a routing entry for 192.168.2 network? I'm afraid it would try to look
for it in the outside...
FWIW, the laptop runs Slackware.
Thanks for any comments, suggestions, etc.!
--
Arcady Genkin http://
2.2.14. Thanks!
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
nto the
debian box. Furthermore, I cannot ftp into the laptop either!
I can telnet both ways w/o any problems. Can ping both ways, too. I
can use rcp! Just not ftp.
Something must be rotten with network.
I tried doing "ftp -n", too.
Any ideas?
> On Tue, 08 Feb 2000, Arcady Gen
nected"
message.
I don't get any prompts to enter my user name or password.
Any help greatly appreciated!
Thanks!
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
Hi all:
Whenever I'm running ddd, I get a dialog informing me that ``DDD
version (3.1.99) has expired since Monday, 2000-01-31, at
00:00. Please upgrade to the recent version.''
What's up with that? Running potato here, with ddd installed as a
packag
t to mention that when I had slink installed, the plugin
worked fine with same sites, that are cureently not working under
potato. Of course, this also means an upgrade from navigator 4.61 to
4.7. As an example, an intro at www.pizzahut.com used to work, but
doesn't anymore. ;^(
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
gt;
> No matter what I enter, it says it can't find it. This is the standard
> Mac m68k CD #1, so it shouldn't have any trouble. What on earth is it
> wanting me to input?
David, is the CD mounted?
If not, have a look at mount command.
--
Arcady Genkin
/usr/lib/netscape/plugins/ShockwaveFlash.class
Typing "about:plugins" in netscape shows Flash installed.
Thanks for any input!
--
Arcady Genkin http://www.thpoon.com
Nostalgia isn't what it used to be.
:lp=/dev/lp0:sd=/var/spool/lpd/lp3:\
| :sh:pw#80:pl#66:px#1440:mx#0:\
| :if=/etc/hpdj/hpdj-best:\
| :af=/var/log/lp-acct:lf=/var/log/lp-errs:
`
There's nothing at all in /var/log/lp-errs.
I can print using Gimp's own HP DJ driver, but I really don
them, though, can play and extract tracks from
them just fine.
There are also mixed-mode CDs, which have both data and audio
tracks. Such CDs can be mounted, but you will only be able to see the
data portion of the CD when you go to /mnt/cdrom or whatever other
mount point you would choose.
--
Arcady
1-member-01.txt
| group-1-member-02.txt
| ...
| group-2-member-01.txt
| ...
`
The resulting files should have an identical portion `blah', and
retain the original numerical parts.
,
| result-1-01.txt
| result-1-02.txt
| ...
| result-2-01.txt
| ...
`
Thanks for any suggestion
Could somebody recommend a good cd-cataloguing program?
It would be nice if it could handle data and audio cds, as well as
read mp3 tags.
Thanks!
--
Arcady Genkin http://www.thpoon.com
"'What good is my pity? Is not the pity the cross upon which he who
ge of data
> takes place? Specifically, I'm wondering if the
> username is passed in clear-text or encrypted when
> using the -l option to ssh client.
User name and password sent over ssh are encrypted.
--
Arcady Genkin http://www.thpoon.com
"'
: 91 (X_QueryColors)
Value in failed request: 0x8000
Serial number of failed request: 1661
Current serial number in output stream: 1661
Any idea what this could be?
Thanks!
--
Arcady Genkin http://www.thpoon.com
"'What good is my pity? Is not the
1 - 100 of 284 matches
Mail list logo