that. Then, the next time you reboot, use the
floppy you just made, to start linux...
Hope this helps,
Brant
The things we do, and the things we say make us who we are, each and every
day. -- Brant Wells, 1999
__
Get Your Private, Free Email at http
connections shared. Linuxbox (my
computer while it's running Debian) has the Apache web server. How can I
make Apache listen to the IP address of DaHouse?
Thanks,
Brant Wells
No weapon formed against them shall prosper... Isaiah 54:17
Hi all...
Does anyone know of a GUI config program for Samba??
Thanx
Brant Wells
Seek ye first the Kindom of God, and His righteousness, and all these
things shall be added to you as well... Matthew 6:33
__
Get Your Private, Free Email
Hi :)
zdrysdal
I am running slink with kernel 2.0.36. Is there any advantage to upgrading
the kernel. If so, which kernel would be best?
Or shall i just leave the kernel alone as things are working fine..
---
(Anyone reading this, please
the boot.bat file Try that and
see what happend ;)
Hope This Helps,
Brant Wells
([EMAIL PROTECTED])
ps: Anyone reading this, please correct me, if there's an easier way to do
this (grin)... Brant
__
Get Your Private, Free Email
Original Message Follows
From: jh [EMAIL PROTECTED]
To: Brant Wells [EMAIL PROTECTED]
Subject: Re: Need help for x window
Date: Fri, 22 Oct 1999 08:46:06 -0600
Jeff--
Thanks for your words of advice. I have been running xf86config and
rerunning it but I can
compatibility problem... That's what I'm looking at
now
L8r,
Brant Wells
([EMAIL PROTECTED])
This tagline is shareware... to register, please send $25 to e-mail address
above...
__
Get Your Private, Free Email at http://www.hotmail.com
Hey Again :)
EGMI'm gueessing something's wrong with your modelines to producethis
effect. When you configured X did you use xvidtune to adjust the timings
(and screen size under various resolutions)? It usually does a pretty good
job despite the warning.
I don't use FVWM so I can't
Hey :)
Sorry, I'm not much of an X'pert. However, if X runs after configuring
with xf86config, then you can still run xvidtune. Haven't a clue if
that'll help your problem though.
--
++
| Eric G. Milleregm2@jps.net |
Hi. If I just want to install 1 program from dselect, would I want to go
through and put an = sign by the programs that are currently installed so
it doesn't have to go through all the files when installing? I hope this
question makes sense.
If you know exactly where the .deb package is, you
Hey :)
From: Tam Ma [EMAIL PROTECTED]
This will be my second attemp trying to configure xfree86. I am a newbie
to linux and this is my first crack at X window so can you guys give a
little help before hose the whole system..hehe. Anyway the favor is that
if you are not busy, can you send
Hi.
I need help...!!
I have an IBM ThinkPad 360Cs, 165 meg hard drive, and 8 megs of ram.
I installed XFree86 3.3.2(.3-2). If I tried to run the XF86Setup, the
screen would go blank, and the only way I can get it back is to reboot my
computer. If I do the CTL+ALT+BKSPC, I get the command
Hi all... It's me again... :(
Okay... Here's the deal... I've got the same IBM 360Cs up and running in
the text mode...When I run X (or even the XF86Setup), the display goes
blank.
The Computer is an IBM Thinkpad 360Cs, 8 megs of ram, WD9030 Video, and a
165 meg hard drive. The system is
HI all...
Jean Yves BARBIER wrote
Hi,
I wonder if somebody has found how to recover files downloaded
(especially from ftp) in the netscape cache?
(these files which are printed to the screen while dowload them)
The only way I found is to watch the modification time of the
cache
Hi All... Thanks for the replies...
I finally got the 2.2.1 kernel booted... It did solve the problem :)
Thanx ,
Brant Wells; [EMAIL PROTECTED]
__
Get Your Private, Free Email at http://www.hotmail.com
Howdy Y'all
I'm doing an installation of Debian for a friend. He's got an IBM Thinkpad
360Cs w/8 megs of ram a 165 meg hard drive.
I need to get the TrendNet PCMCIA network card going, so I can mount the
Debian CD that's on My linux box... Help!
Thanx
Brant Wells
Howdy Y'all:
I've got a Permedia PCI Video Card w/4 megs of Ram. After I installed
the card, when I run startx, the screen goes black I have to turn my
machine off back on before the video comes back... Help!!
TIA,
Brant
Howdy :)
You need to start up a xterm session after you run startx. Do this by going
into
your $HOME/.xinitrc file and add a line in there somewhere before your window
manager
(usually the last line) to the effect of
xterm
and then try to run those programs after you get into X.
HTH,.
Howdy Y'all :)
I just got a Hawking 10/100 mbps network card. Can anyone help me set
it up?? I've got the Linux module sources that are on a disk, and when
I compile under Kernel 2.2.3, I get an error about the linux/bios32.h
being obsoete. Is there some way I can patch the source code to fix
Hey Y'all!!
Thanks for the tips on the telnet problem-- it worked!! :)
Thankfully Yours,
Brant
Hi Y'all
Does anyone know of a good Visual Basic Style IDE for Linux?? Or how
about an ELF compiler for basic??
TIA,
Brant
Howdy All:
I've recently discovered a problem on my two Linux boxes in the house.
If I am not connected to the internet, I cannot telnet between the two
of them :( Can anyone help?
Linuxbox (Computer 3)
Tcp/IP: 192.168.0.115
Subnet 255.255.255.0
Gateway 192.168.0.10
DNS 206.66.158.201 (My ISP)
Howdy Allen:
In your $HOME direcotry, edit the file .xinitrc
In this file somewhere should be a line that says something like:
xhost + blablabla.
If you have no need for security (in a small home network like mine...) you can
just
add in:
xhost +
and and that should solve the problem.
I
Hey Y'all :)
Thanks for the help. It worked!! I don't know what happened--I had the
source code installed perfectly before, and then it just went crazy on
me... Oh, well--I'm back in business. Thanks!
TAL [Thanks A Lot!],
Brant
Howdy All :)
Is there anyone that knows of a good Java Programming Environment for
Linux??
TIA,
Brant
Howdy All:
How are ya?
Last night, I was working on installing the Kernel 2.2.3 Sources. I
unpack them and then run 'make menuconfig' and this is what I get...
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C scripts/lxdialog all
make[1]: Entering directory
Howdy All :)
I'm looking for some software that will turn Windows NT/9X into an X
Server--where I can telnet in from a Linux station run Windows apps
under X...
WinNTTCP/IPLinux
MIRC32 Some SoftwareXFree86...
Anybody know of anything?
Thanks,
Brant Wells!
Hi All
I was just wondering if there was a way to set Linux up as an NFS server
without all the hassle of creating an exports file, etc. etc... Just one
that I can install go...???
Thanx,
Brant
Hey :) Thanx!
I read the man pages on the exports file I couldn't understand it... I think
I see
what I need to do now :) Thanx!
Thanks
Brant Wells
Mitch Blevins wrote:
How would you tell the server which directories to serve?
The exports file is already there. Just type the name
Howdy:
I'm looking for some help... I have Netscape installed on my Linux box
I need to get it to come up on my other Linux box using the XWindows
system
(Workshop)--(Linuxbox w/Netscape). I need netscape to run
on
the Workshop's XServer on display :0.0 (Workshop:0.0)... How
Hey Guys :)
Mark Brown wrote:
On Tue, Apr 13, 1999 at 02:40:24PM -0400, Dan Brosemer wrote:
I'm thinking of using ipmasq to share a cable-modem among many machines.
I would like to set up a DNS on this (gateway? proxy?) in order to resolve
names inside this subnetwork. I would also like
Howdy:
Have you checked to make sure that the latptop PCMCIA packages are installed?
Just checking,
Brant.
Chris Brown wrote:
Please help, this is a newbie being stupid question
I've done several slink installs that have worked fine.
I'm trying to install it on my laptop now and am
Howdy:
You are running Kernel v2.2.5, right?
Did you install VMWare before or after you installed 2.2.5?
I've got the same problem on a different scale, but VMWare installs and runs...
Does
yours install at all?
Go a head and tell it to install VMWare onto your computer.
As for the Ncurses
Howdy all...
I saw a message in this thread pass by a couple of days ago... It was
talking about some software called VMWare. Http://www.vmware.com
Anyone that has a PC with Linux Win 9x/NT installed needs to see this
site. I've downloaded the software for Linux (still in the first beta
Howdy All!
I've been working with installing the Kernel 2.2.3, and I have a
problem... After I run the 'make menuconfig' and then 'make clean; make
dep; make install'... I then make a boot file for the NT Boot Manager...
When I get the NT Boot Manager to go to Linux, Everything works fine,
until
Howdy All...
My Linux box is running on an ext2 partition.
I use 'make install' , because it automatically makes the necessary changes for
me, plus the fact that the last time I tried 'make zImage', it wiped out my
Hard Drive when I installed it.
I just went back and looked at the setup in
Howdy Y'all
There is a way to set up an autoexec.bat kindof thing in Debian, based on each
user... in the users home directory, edit the .bash_profile This works if you
are
using the bash shell.
HTH,
Brant
Christian Dysthe wrote:
Hi,
I had the same problem. See the thread Where is
at the man page, and it was no help... :( Can any one help me out??
Thanks,
Brant Wells
|||
|||
|
|||
|||
|||
reasons
I looked at the man page, and it was no help... :( Can any one help me out??
Thanks,
Brant Wells
|||
|||
|||
|||
|||
|||
Howdy:
Make sure that the DNS is active on one machine or the other, and that the
names are
still set up properly... I'm assuming (should I?) that you are running a
tcp/ip based
net... Also: You may want to try to issue the mount command using the command
line
option for IP address (I may be
Hey Nuno:
Try adding the 'mount' commands into the /root/.bash_profile (.bash_profile is
the
autoexec file in each user's HOME Directory...But only the root user, or one
who has
root access can mount partitions, etc.
Hope this helps,
Brant
Nuno Donato wrote:
I really need some help here.
, make sure you know what
the process is that is eating up the cpu time... If you are not familiar with
it, see what others may know
Hope This Helps,
Brant Wells
Howdy Leonardo
Have you tried setting the default resolution using the XF86Setup? See
what happens... You may have to toy around with the /etc/X11/XF86Config
file to fine tune it...
HTH,
BrantW
RAM... Rarely Adequate Memory...
From: Leonardo Bermudez [EMAIL PROTECTED]
To:
Date: Thu, 18 Feb 1999 20:11:42 -0500
From: Matthew Cocker [EMAIL PROTECTED]
To: debian debian-user@lists.debian.org
Subject: smbfsx
I am trying to mount a samba server via the follow command
bash-2.01$ smbmount-2.1.x //host/share -c 'mount /directory -u 123 -g
456'
I get the following out put
Howdy Y'all:
I'm trying to write some QT apps, just really toying around with C++,
but when I try to compile ANY of the QT apps, using the command line:
g++ -I/usr/local/qt/include -L/usr/X11R6 -lqt filename.CC
I get an error message about a whole bunch of undefined references...
Can anyone
Howdy Y'all...
I'm trying to write some QT1.42 apps; they won't compile when I issue
the command:
g++ -I /usr/local/qt/include -L/usr/X11R6/lib -lqt TestCalc.cc
I get the following error messages:
/usr/lib/crt1.o(.text+0x36): undefined reference to `main'
/tmp/ccc01819: In function
Howdy Y'all...
I'm trying to write some QT1.42 apps; they won't compile when I issue
the command:
g++ -I /usr/local/qt/include -L/usr/X11R6/lib -lqt TestCalc.cc
I get the following error messages:
/usr/lib/crt1.o(.text+0x36): undefined reference to `main'
/tmp/ccc01819: In function
Howdy Y'all...
I'm trying to write some QT1.42 apps; they won't compile when I issue
the command:
g++ -I /usr/local/qt/include -L/usr/X11R6/lib -lqt TestCalc.cc
I get the following error messages:
/usr/lib/crt1.o(.text+0x36): undefined reference to `main'
/tmp/ccc01819: In function
Howdy Y'all...
I'm trying to write some QT1.42 apps; they won't compile when I issue
the command:
g++ -I /usr/local/qt/include -L/usr/X11R6/lib -lqt TestCalc.cc
I get the following error messages:
/usr/lib/crt1.o(.text+0x36): undefined reference to `main'
/tmp/ccc01819: In function
Howdy Y'all...
I'm trying to write some QT1.42 apps; they won't compile when I issue
the command:
g++ -I /usr/local/qt/include -L/usr/X11R6/lib -lqt TestCalc.cc
I get the following error messages:
/usr/lib/crt1.o(.text+0x36): undefined reference to `main'
/tmp/ccc01819: In function
Howdy Y'all:
I'm trying to write some QT apps, just really toying around with C++,
but when I try to compile ANY of the QT apps, using the command line:
g++ -I/usr/local/qt/include -L/usr/X11R6 -lqt filename.CC
I get an error message about a whole bunch of undefined references...
Can anyone
Howdy All...
Is there an X-based programming environment like Visual Basic, or Visual
C++??? Any help woule be appreciated.
Thanks,
Brant
__
Get Your Private, Free Email at http://www.hotmail.com
Howdy All!
Many thanks to those who e-mailed me regarding my X problems :) All
fixed now :)
Thanks,
Brant
__
Get Your Private, Free Email at http://www.hotmail.com
Hey Nuno!
How are you?
Log in to your Linux system as root.
Then run the dselcect to install the packages (libs, etc..)
When you get into dselect, go to the packages list, and then press the /
key. Then, you can search for the libs that it is missing, like for
xpm, or libg++, etc. (You
Howdy Y'all!
I had to reformat my Linux box because NT screwed up the partitions... I
re-installed everything from scratch...But this time, I'm having new
problems...
With KDE, the KDE Icons (like in the kfm) appear as black blocks or
trashy images...I'm using KDE 1.0, off of the Debian
Howdy y'all :)
I've got timidity the packages installed ( and the MIDI files sound
good!!). Now... I've one more tiny ( I hope problem...)
A while back, I sent out an e-mail asking how get linux to print to a
network printer...I never had a chance to get it working... my Linux box
kept
Howdy bekj,
Check in your bios settings or your IO Board (Mouse/Printer, etc) to
make sure that the LPT1 is set to address 378.
BTW--What version of Debian are you running? (2.0R1 has the ZipDrive
Support built in)...
Hope that helps,
Brant
Howdy All:
I finally figured out how to get my sound working :) My SoundBlaster 16
works GREAT for playing sound files(wav's) and Audio CD's... But when I
go to play a Midi file, It sound like the reverb is set to max and bass
is set to almost none...I have to turn the speakers up to hear the
Howdy y'all :)
Sorry I've been off the air for so long (I've been waiting for my debian
Cd's to get here).. I finally got them :)
Okay here's the scoop... I was running kernel 2.0.32, and I custom
compiled 2.0.34 for sound using make menuconfig...Here's the problem...
Under kernel 2.0.32, I
Howdy Y'all!
Thanks for all the help out there! I got it working.
Brant
__
Get Your Private, Free Email at http://www.hotmail.com
Howdy all...
I've got samba set up to where I can print to a shared printer... But
the files have to be text files, and I have to do it manually from the
smb: prompt :(
WP8 will go through the motions, but will not print to the printer...
I created a script for this, /usr/bin/netprint it
appreciated.
Thanks,
Brant Wells
__
Get Your Private, Free Email at http://www.hotmail.com
Howdy Y'all
Thanks for helping me get Wp8 installed... Everything went fairly
smoothly... Now I have just one tiny problem... It doesn't run :(
Help!! (again)
Thanks,
Brant.
I really appreciate the help that this list has been to me! keep up the
good work y'all :)
Howdy Y'all
My WP8 installed correctly, but I am unable to execute it for some
reason... If I start an X-Term session, I get a command not found
error... :(
It doesn't matter who I log in as, it won't run, even if I go to the
folder that it is installed in...
For reference, I am running the
Howdy y'all...
I got Wp8 fixed... I think :)
I just added it into the path line, and it has started working... Thanks
for all the support!
Brant Wells,
Seek ye first the kingdom of God and His righteousness, and all these
things shall be added unto you. Matthew 6:33
Howdy All,
I've got a Linux box up and running, and have no problems with it (Thank
God!). I have one more thing I need to do before I will be satisfied...
How can I set Linux (Debian2.0) up as a file server? I have three PC's
on the network... 1. WinNT4 2. Win98 3. Linux
I need linux to
the computer...
When the WinNT boot screen comes up, you should see a choice that says
whatever you put in, like Debian Linux! Just select it, and press
enter... If all goes well, and is done correctly, then your Linux
System Will boot...
Let me know if this works...
Brant Wells.
Whosoever
Howdy Y'all
I just downloaded the WordPerfect 8 GZ file from the Corel Ftp site...
I downloaded the single part version (I saved the file as WordP8.gz)
When I go to unzip it (using gzip -d), I get an error saying that the
file is not a GZipped file...I downloaded it with Netscape 4.5 (which
will be the dial up for the internet)...
Is any of that any help?? Let me know...
Brant Wells
RAM Rarely Adequate Memory...
__
Get Your Private, Free Email at http://www.hotmail.com
, and maybe we can work through this together
:)
Fellow Linux Newbie,
Brant Wells; Ramdisk... not an installation procedure...
__
Get Your Private, Free Email at http://www.hotmail.com
Howdy Y'all
How can I re-configure my network after installing linux?
Thanx for the help :)
Brant Wells; a linux newbie
__
Get Your Private, Free Email at http://www.hotmail.com
Howdy All :)
Can someone tell me how to add a DNS entry into the /etc/networks file?
I've got network access, but I have to know the IP addresses for access
:( I know the IP of the DNS server, but I don't know how to set it up.
Thanx
Brant
Howdy All :)
Can someone tell me how to add a DNS entry into the /etc/networks file?
I've got network access, but I have to know the IP addresses for access
:( I know the IP of the DNS server, but I don't know how to set it up.
Thanx
Brant
Hey all!
I downloaded the *.deb packages for NETSCAPE...when I try to install it
using dselect, it won't install... Help!!!
Thanx,
Brant
__
Get Your Private, Free Email at http://www.hotmail.com
74 matches
Mail list logo
