Hello, My name is Yusuf Rahman with TopPressPublishing.com.
We are a Marketing and Publishing company and we were curious about what
methods you were currently using to grow your business and how effective it
was over the cost?
We are not interested in wasting your time for our time is just as
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
shouldn't think this is the problem... Are there any
errors that add to connection latency that I should be looking for in
the firewalling rules?
Thanks,
Chris Brown
[EMAIL PROTECTED]
Seitz Technical Products Inc
missed something.
To make matters a bit weirder, IPX route happily between the
interfaces. It's only IP that is causeing problems.
Any help would be appreciated.
CBrown
*
Chris Brown [EMAIL PROTECTED] !!! HELP
-link the names to the files? I'm a relatively
experienced GNU/Linux user and have done ext2 file recovery a few
times before. I'm not scared of low-level fs editing, so no holds
barred on prospective solutions. Thanks for any help!!
Chris Brown
[EMAIL PROTECTED
devpts
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
currently being processed.
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
Hi all,
Is there any way to tell icmplogd to not write a log entry for a
ping from a group of ip addresses? My log files are getting huge but
I don't want to stop pings completely.
Thanks,
Chris
*
Chris Brown
config is? The password is
set for root, and logging through su and over telnet works correctly.
Thanks,
Chris
my /etc/inittab should be attached
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
continues to run fine, is this serious? how do I track
down the problem?
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
it.
Any suggestions,
TIA,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
, then on rebooting the network doesn't
work and ping returns operation not allowed
Any suggestions please !!
On 5 Apr 99 at 22:42, Brant Wells wrote:
Have you checked to make sure that the latptop PCMCIA packages are
installed?
Just checking,
Brant.
Chris Brown wrote:
Please help
, then on rebooting the network doesn't
work and ping returns operation not allowed
Any suggestions please !!
On 5 Apr 99 at 22:42, Brant Wells wrote:
Have you checked to make sure that the latptop PCMCIA packages are
installed?
Just checking,
Brant.
Chris Brown wrote:
Please help
On Tue, 6 Apr 1999, Chris Brown wrote:
Brant others. getting desperate here, please help!
To answer your question, I'm not sure *EXACTLY* how to check if the
PCMCIA packages are installed, but I believe the answer is yes.
If I look at top, I can see cardmgr running. If I
standpoint?
TIA,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
to shut the system down
after the hang...
Any Suggestions,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
offending software in general?
TIA,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
I have a favorite base system, can I integrate that
into the dselect program for future installs?
TIA,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net
Hi
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
packages for them. We also were curious about why the
most recent version of the tools were not included in slink.
Thanks,
Chris Brown
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join
we're root. The password is set, and when we
telnet to it su works like it should, asking for and accepting the
root password. Is automatic root login normal for slink? If so,
where can we kill that?
*
Chris Brown
a zombie is and how to kill it?
TIA,
Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
mirror. Does anybody know
why it randomly stops downloading?
Thanks,
C.Brown
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com
Hi,
I'm having trouble finding any documentation on the automatic
screen saver in linux. Does anybody know how to turn it off? It
gets annoying having the screen black out after 5 minutes. Thanks!
C.Brown
*
Chris
in giving these a work
out.
The IDEAL would be if the program could run in background and do a
non-destructive surface scan to a mounted drive. I know that's asking
a lot, but I'd be happy with anything at this point.
TIA,
Chris Brown
adatper or something else?
3. Once I get the network working should I use NFS or FTP to access
the packages? (are there important pro's and con's of each?)
TIA for any suggestions,
Chris
*
Chris Brown [EMAIL PROTECTED
with
little data loss?
TIA
-Chris
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
and they don't use NE2000
I/O addresses. The HOW-2's don't seem to list this chip.
Does anyone know if this part is supported, the drive name and how to
get it?
Many thanks,
Chris
*
Chris Brown [EMAIL PROTECTED
for a breif but complete listing bash and
external commands.
Any suggestions pointing me towards specific online docs, faqs,
howto's or published books would be greatly appreciated.
TIA,
Chirs
*
Chris Brown [EMAIL
My experiences with this indicate that LILO CANNOT configure itself
on any except the first logical drive. I didn't experiment with it,
but since removeable media (jaz drive) can be /dev/sda that made
my hard drive /dev/sdb. When I tried to make lilo insert itself
under these
but once that is done DOS is happy to
ignore the BIOS. Is this the case with Linux? Is it necessary to
pass the disk parameters to the kernel at boot time?
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM
I have gotten uucp running properly over tcp. When using tcp
which mode is the most effecient? From what I understand mode t was
designed for such links but taylor suppores mode i which I haven't
seen much documentation on. Which way should I go?
--
TO UNSUBSCRIBE FROM THIS MAILING
I have a Debian 1.3 server running wu-ftpd and apache. This
server is intended for public use. Last weak my boss found out
that he was not able to telnet or ftp to that machine. It turned out
that his DNS entry and reverse DNS entries didn't match for his
laptop so the server was
at the shop I told it to
be able to use uucp but I don't see anything in the sendmail.cf that
would allow this. I figure that it should be simple to add a couple
of lines to the sendmail.cf to take care of all this.
*
Chris
I was looking around the ohter day and found a couple of old
mirrors that there is no interest in any longer and I want to remove
the entire directory tree that they are in. What is the simplest way
to do this?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
ftp.debian.org,
ftp.crosslink.net and ftp.caldera.com. I even had to FTP the install
floppies using netscape on windows. Any ideas would be helpfull.
*
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join
the records
for seitz.com. Is there any other means of determining weather
their DNS is acting as secondary?
*
Chris Brown [EMAIL PROTECTED]!!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net
the queue. What is the appropriat means of doing this
for mail to be forwarded?
*
Chris Brown [EMAIL PROTECTED]!!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
It may
I am looking at setting up setting up several mail hosts. After
doing a little reading it looks like sendmail is significantly more
flexible than smail though possibly a bit more difficult to learn.
Initially the only need to have a host that will pick up mail if our
primary server is
I have a machine that I was using on my net here and I upgraded
it from 1.2 to 1.3 over the last couple of days. When I rebooted
this morning the machine came back up with my old 2.0.27 kernel but I
can't get an aliased address on the ethernet port. The reason that
it is a big problem
When setting up Taylor uucp over tcp it looks to me that the
only configuration files that are needed are.
1. config:
hostname foo
2. sys:
system foo2
address foo2.bar.com
timeAny
porttcp-conn
chatogin: login_name word: pass_word
3. port:
The other day I set up a couple of new machines and decided to
monitor then from home. One thng that I thought would be nice was to
run the procmeter on the remote machine. I'v never run any
applications on X via a network connection befor so I thought this
would be interesting. After
I have a machine that is set up with an NFS and I was able to
mount it's drive one time on my ethernet at home but not after that.
The host.allow and host.deny are set up and the exports file has an
entry something like this:
/mnt (ro,insecure,no_root_squash)
but it returns an
Last night I tried the:
loadlin vmlinuz root=/dev/hda1 ether=0,0,eth0 ether=0,0,eth1 ro
There was no success there but I'm a little confused in that I
thought that you just told the kernel that the second card was there
and then it would look for it. Most of the time I have been
I am trying to get my machine to use 2 3c509 ethernet cards
booting from loadlin. Looking at the loadlin docs I think the
command line should be:
loadlin vmlinuz root=/dev/hda1 ether=10,300,eth0 ether=11,310,eth1 ro
eth0 is fine but I don't get eth1 at all. There isn't even a reference
I have been doing a bit of planning related to subnetting a
class C for our ehternet. One of the problems that I ran into was
that if I used RIP the entire network had to be on the same
subnetmask, since RIP doesn't deal with subnet masks. This was a
real pain since I have a couple of
I have to set up a primary DNS that will also route between two
10base2 ethernets with packet filtering. The line to the Internet
will be a 128 K ISDN line so that bandwidth will be limited there.
What class of machine is necessary for such a task? I have 3
machines laying around, a
I have apache instilled on my home machine to do some testing.
It was in anticipation of setting it up at work. Over the last few
days, when I boot the machine apache doesn't load any longer. Trying
to start it manually by doing /etc/init.d/apache start doesn't work
either. None of
Quite a while ago I selected netscape 3.01 to be installed.
When I got the netscape tar.gz file, I got the gold package which was
not what the .deb file was trying to install it was trying to do the
non gold 3.01. Since I had the tar file and didn't feel like getting
the other one I
I have been using Debian for a while now as a work station for a
little bit now and have been pleased with it. I was originally
quite surprised at the performance and reliability that I
experienced. VERY soon I will have to install a server here at work
for FTP and WWW services. I
Last night I was running Netscape 3.01 Gold, looking at files on
my local drive and the machine stopped responding to the keyboard and
mouse buttons. The prockmeter was running, monitoring the ppp line
to my ISP, it was running fine. When I telneted into the system and
did ps -a and
Very shortly I need to get an order in for new server parts one
of the things that I haven't dealt with before is pci bus ethernet
cards. Which cards and drivers are the most stable and which the
best performing? Most reliable is probably more important.
--
TO UNSUBSCRIBE FROM THIS
I have been looking at using apache as our web server and it
will be necessary to set up the server to appear as 3 different
domains. After looking at some of the documentation it appears that
a machine could be set up so that the server machine will respond
to 3 different IP addresses
I have little experiance with postsctipt and am having trouble
printing some files. One in particular is a 1.4 Meg file of around
325 pages. The printers that I have available are HP laserjet series
2 and 4. Ghostscript gets to the 100 page point and quits. This
happens when I
I will be connecting several different types of systems to an
ethernet network that is currently running only Netware on ipx. On
the Netware server and workstations it is necessary to specify the
Ethernet frame type. IPX is running either Ethernet_802.2 or
Ethernet_803.2. The Novel
I have installde debian 1.2 on my desk top machine and
origionally configured it with an IP address of 0.0.0.0 since my ISP
uses dymanic IP address allocation. A few days ago I decided to try
setting up the desktop machine as a server for my laptop so that I
could get a little space on
I have several EP200 ethernet adaptors available. Is there a
way to use them. I haven't seen any mention of them in any FAQ or
HOWTO.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
66 matches
Mail list logo
