On 02/11/2003, at 3:21 PM, Jeffrey Barish wrote:
At that point, ping worked. So it seems as if dhcp is not working.
Is there something in the kernel configuration that is required to
make dhcp work?
You need CONFIG_FILTER enabled in your kernel. It is in networking
options in menuconfig.
On Wednesday, August 27, 2003, at 01:27 AM, Victory wrote:
1, Is there way to clone this hard drive ?
If you are cloning it to an identical hard drive, you can use dd, eg:
dd if=/dev/hda of=/dev/hdb
2, Is it possible to create bootable CD of the working system so that
when I boot to new
On Wednesday, August 27, 2003, at 02:54 PM, amg wrote:
Can I essentially:
-detach my debian-installed drives
-attach a blank drive (it would be the last IDE slot)
-install XP onto that disk (letting XP muck around with the MBR (on
it's
own drive))
-re-attach the debian drives (leaving the XP
On Wednesday, August 27, 2003, at 05:11 PM, Ashley Graham wrote:
That should all be fine, as long as XP doesn't get upset about the
changed order of the disks.
Do you have experience in that it will? Or is this a more or less,
beware this might happen.
In other words, have you seen it happen?
Hi Neal,
On Sunday, August 3, 2003, at 12:50 PM, Neal Lippman wrote:
1) Which lvm package to install? There are two obvious choices, lvm10
and lvm2. While lvm2 is the new rewrite, which is supposedly stable,
it apparently lacks some features and according to the debian.org
description of the
I am looking into the possibility of transfering an NT/IIS based webserver
over to apache on debian 2.1, the only thing I need to confirm is that the
frontpage extenstions will be available and equal to the NT versions.
A couple things:
Is it available as a deb package? Is it in the
I have debian running on a similar setup on a HP LPr.
You didn't mention the specifics of your problem, but one problem I found was
booting from the raid array. I found that it was easier to put in a seperate
internal drive to boot from, then mount the raid array.
If this isn't what the problem
Sorry, I'm sure everyone's sick of ppp problems on the list, but this one has
me stumped :)
I have just set up a 486 running slink to be a dial-up server (ip masq, 2.3.3
kernel) for a couple win 98 boxes.
It is getting many frame errors, seen when I run 'ifconfig ppp0'. The
connection seems
. - Bill Gates in Denmark
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
--
Corey Ralph Email: [EMAIL PROTECTED]
Technical Manager Phone: (03) 5133 0115
Network Technology Fax:(03) 5133 0805
.
--
Phillip Deackes
[EMAIL PROTECTED]
Debian Linux v.2.1
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
--
Corey Ralph Email: [EMAIL PROTECTED]
Technical Manager Phone: (03) 5133 0115
Network Technology Fax
Hello all,
I have a squid server set up as a transparent proxy, (Squid/2.1.PATCH2). It
runs great most of the time, except occasionally:
/usr/lib/squid/RunCache: line 66: 850 Segmentation fault squid $@
It ran fine for two days, happened once one day, then 12 times in one night,
during
Does anyone know where I can find a howto on setting up ssh?
I have tried running the script to get the hosts using dns, but it doesn't
find any hosts. Is there a way to give it an IP address to try, and have it
add the host?
Thanks in advance.
Hello.
I am in the process of rewriting some billing software and need some advice
on how I should tackle doing bulk printing on linux.
The thing I need to know is what format to use. HTML would be the easiest,
can the print spooler interpret it? Can I get software to do convert it to
I had the same problem, the best work-around is to instal a 2.2 kernel
compiled with vesa framebuffer support, then use the xf_fbcon x server.
The info on the framebuffer is in the Documentation directory in the kernel
source.
Corey
-Original Message-
From: Eurisko [mailto:[EMAIL
I'm having a problem getting vmware to install on slink with 2.2.3 kernel.
Something to do with include files. First, I still had the 2.0.36 headers
installed. I upgraded these to the 2.2.3 versions.
The error that it is reporting is that there is no include path to find
asm/cache, followed by
Hello all,
Just a quick one, I am trying to get netscape 4.5 going on slink, it seems
to need libg++ 2.7, the old libs version on slink is 2.8.
Is this on hamm and will it do any damage installing it? If not, where can
I get it in a .deb?
Thanks.
My system has been running Debian 2.0 fine for several weeks now, but now
locks up on boot.
It first happened when I was in X and was changing routing, IP addresses
etc. The machine locked up solid and I had to power reset it. When it
rebooted, it fixed several errors on the drive. It locked up
Can anyone offer me any advice on setting up diskless machines?
From what I have read, I should be able to boot from a bootrom and nfs mount
the root filesystem from a server. Does anyone make bootroms for intel
eepro cards, as I don't have a working eprom burner?
Is there any way to change the scan rates of the framebuffer in the 2.2
kernel? I finally got it all to work, but the default refresh rate is
really noticable (and gives me a headache!)
I have set up 2.2.1 and have it booting into a high res mode, it shows the
logo on startup etc.
However, fb0 is not appearing in /dev. Is there anything else I need to do?
to set screen params (invalid argument)
My XF86Config is stripped down, as the fb docs say it will use the default
res, I have specified Depth 16.
Any ideas?
-Original Message-
From: Daniel Martin [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 04, 1999 4:09 PM
To: Corey Ralph
Cc
Sorry, I just had the depth set wrong! :)
-Original Message-
From: Corey Ralph [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 04, 1999 4:57 PM
To: Debian User
Subject: More xf86_fb problems
Thanks for that, I actually found it a couple minutes after posting the
question. Next
I have been trying to get XFree86 to work with a Trio3d AGP card, and it
doesn't seem to be supported.
Somebody sent me a link to an update for red hat to support it, but I would
prefer to stick with Debian.
I am using Debian 2.0 I have upgraded to the XFree86 from slink, and have
download the
an
example?
Cheers.
Corey
-Original Message-
From: Bernhard Dobbels [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 04, 1999 3:28 AM
To: Corey Ralph
Cc: debian-user@lists.debian.org
Subject: Re: XFree with S3 Trio3D AGP?
On Wed, 3 Mar 1999, Corey Ralph wrote:
|I have been trying
24 matches
Mail list logo
