to use the -R option? I didn't have to under
> slackware.
>
I suspect that slackware runs the daemon with the -R option and sets up X
to use /dev/gpmdata. Try it ;-)
Dwarf
--
aka Dale Scheetz
mail. If that is not available in
the mail-delivery-agent, then point me to a package that will work with
the target mail-delivery-agent.
Thanks in advance for any help,
Dwarf
--
aka Dale Scheetz Phone: 1
ppp is loaded, and I have set up the files
> /etc/ppp/options
> /etc/ppp/chatscript
> It's just that it doesn't dial.
> What's wrong?
>
I might help if we could see those two scripts :-)
Dwarf
--
the kernel.
> What's wrong with my setup?
>
As far as I know, PPP must still be compiled as a module, not built-in.
Try M instead of Y for your response. It should work then.
Luck,
Dwarf
--
aka Dale Schee
ure this is a PS/2 mouse? Does it have the cylindrical connector
or the trapazoidal 9 pin DIN? I'm not sure why the kernel says it found a
PS mouse, but it sounds like you want the serial protocal.
Luck,
Dwarf
---- --
aka Dale
e, run depmod
and try to reboot again.
Hope this helps,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
my ignorance. Do I need to do any pre-processing here?
Or have I just left out a necessary switch for gcc?
Any help would be appreciated.
TIA,
Dwarf
----------
aka Dale Scheetz Phone: 1 (904) 877-0257
nswer session that results in a properly
configured system. (I believe you must install at least the server package
you will need before you can install the base packages. Don't forget the
fonts.)
---
Hope this helps,
Dwarf
-
t name is dpkg-scanpackages.
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
I
don't
remember which, but cron was among them) packages, the problem went away.
Seems to be some longwinded bookkeeping going on.
Try upgrading the admin section and see if that fixes it.
Luck,
Dwarf
------
aka Dale Scheetz
(All else is working smoothly.)
>
Replacing -ltermcap with -lncurses should work fine.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
system you can boot into and install the rest of the
packages.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mai
. If you used my script to do the first
upgrade, just run it again. It knows when a package is already installed
and only installs the upgrades.
Luck,
Dwarf
------
aka Dale Scheetz Phone: 1 (904) 877-02
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
Kevin?
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
oublesome about the new copyright (Bruce?) you
may look for 3.94 as soon as I can get some time to build it.
Luck,
Dwarf
---- --
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software
o' says that I am using the ttyp0 console. How do I switch to it?
>
Try the first VC above the assigned ones. For Debian this is F7.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
se package that
is not free. Check the copyright in all cases if you want to put them on a
cd or something.
Enjoy,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax
,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
it?
>
This is in the libc4 package in section devel.
Luck,
Dwarf
------
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters
stop bits alone?
I can put the above command into .bashrc, but this will not fix login and
I will still get the bunged password prompt.
Looks like it's time to talk with Guy :-)
Thanks for all the help,
Dwarf
--
aka
On Fri, 7 Jun 1996, Guy Maor wrote:
> On Fri, 7 Jun 1996, Dale Scheetz wrote:
>
> > Here's the 'ls -a /usr/lib/terminfo'
Ooops, how dull of me :-)
>
> Why did you send me that? The BUGS file is probably in one of those
> subdirs. Since I don't w
t is only login and
bash that don't seem to talk right. I don't see how getty could send slow
enough to not error and login not. They are both using the same driver,
aren't they?
Thanks for the idea,
Dwarf
---- --
aka
This site is on-line from 10am til 2pm and 7pm til 10pm weekdays.
I will make an anouncement when they get to the mirrors, after I move
them.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexi
On Fri, 7 Jun 1996, Guy Maor wrote:
> On Fri, 7 Jun 1996, Dale Scheetz wrote:
>
> > I installed ncurses-term-1.9.9e-1.deb but when I do the toe above I get:
> >
> > infocmp: can't open terminfo file BUGS.
>
> toe is Table Of Entries. It just lists all the
On Fri, 7 Jun 1996 [EMAIL PROTECTED] wrote:
>
> Dale Scheetz writes:
> Dale> I just went back to working on Octave and don't seem to have F77 any
> Dale> more. I have been keeping pretty up to date on the devel
> Dale> section. Anyone know what happened to
On Thu, 6 Jun 1996, Guy Maor wrote:
> On Thu, 6 Jun 1996, Dale Scheetz wrote:
>
> > Thanks to Dirk and Guy, I got getty running on ttyS1 to a Data General
> > terminal (ok, ok, but I got it for free. In fact I have 6 of them) but I
> > still have problems.
>
> Ins
I just went back to working on Octave and don't seem to have F77 any more.
I have been keeping pretty up to date on the devel section. Anyone know
what happened to it?
TIA,
Dwarf
--
aka Dale Scheetz
does no good)
What do I need to do to get login and bash to work?
TIA,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters
.
As you may note, I am trying to hook up a hardwired terminal to com2. Does
anyone know how to do this with the programs installed by the getty
package? Do I need to use something else to do this?
TIA,
Dwarf
--
aka Dale Sc
n upgrading. I am usually on the air between 10am and
2pm and 7pm to 10pm on weekdays.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black C
On Thu, 6 Jun 1996, Lawrence Chim wrote:
> Is there any program can check *.deb, something like theh tar -t for the
> *.tar?
>
Try:
dpkg --contents package-xxx.deb
Luck,
Dwarf
--
aka Dale Scheetz
than
more. Try it, you'll like it!
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
Use depends, but make it depend on the appropriate version of libc
and not on a particular kernel package.
Thanks,
Dwarf
---- --
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software
ey no longer do that,
however, I have not been happy with the position taken by the package
maintainer on these issues, so have been unwilling to try the newer
packages (mostly because they are unnecessary to the functioning of my
system)
Later,
Dwarf
--------
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
ules for how
to write an options line.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
On Sun, 26 May 1996, Amos Shapira wrote:
> Hello,
>
> I'm trying to upgrade 0.93 to 1.1 according to Dale Scheetz' instrucions
> but encounter a basic problem. (Posted on May 16th)
>
> My setup - an IDE disk used for booting and as root, a SCSI disk used to hold
&g
,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see wha
On Mon, 20 May 1996, Stephen Early wrote:
> On Mon, 20 May 1996, Dale Scheetz wrote:
>
> > I have tried to use imake on several packages recently. If I try xmkmf I
> > get something like:
> >
> > imake -DUseInstalled -I/usr/X11R6/lib/X11/config
> > Imakef
eems to be responsible for imake and
xmkmf.
What else is there?
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mai
On Thu, 16 May 1996, Stephen Early wrote:
> On Thu, 16 May 1996, Dale Scheetz wrote:
>
> > OK, so, I used xdm to start X and things work fine. When I exit fvwm2 I
> > get a login prompt. Now, I want to shut down the server.
> >
> > A. I can find no xdm process
work. Maybe it
will work now that I have a good ps.
Thanks,
Dwarf
------
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mai
seeing a process id when I started xdm, but that was long
ago and far away.
TIA,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek
l back to the a.out version from
stable (1.1.1-1) until I can get the next version up and running. Soon, I
hope :-)
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
The following is the latest of my upgrade notes. The UpGrade script is
slightly improved (it can now handle # comment lines). I have also
included the, as yet not completely fixed, devel section list at the end
of this document. It will upgrade you to a development system that will
build a new kern
e
out how to do that either. So, I have two questions:
1. What are the key strokes for changing graphics mode while in X.
2. What changes does config need to run a different mode at startup.
TIA,
Dwarf
--
aka Dale Sc
On Wed, 15 May 1996, Kevin M Bealer wrote:
> On Tue, 14 May 1996, Dale Scheetz wrote:
>
> > > Unfortunately, you mus edit the /etc/X11/fvwm/system.fvwmrc file yourself
> > > to add the menu items. I don't know of any good menu editor but there
> > > ma
On Tue, 14 May 1996, Kevin M Bealer wrote:
> On Mon, 13 May 1996, Dale Scheetz wrote:
>
> > When I decide what I want to add, how do I hang it on the menu system? Is
> > there a good user tutorial? In particular, I can start the xserver either
> > as root or as a user
ectory' but they both result in a locked application. In one case I had
to go out to the prompt to kill netscape (x windows was locked up tight)
Anyone have any ideas? Is a purge and re-install likely to work?
TIA,
Dwarf
--
ak
On Tue, 14 May 1996, Carlo U. Segre wrote:
> On Mon, 13 May 1996, Dale Scheetz wrote:
>
> >
> > (Reading database ... 13477 files and directories currently installed.)
> > Preparing to replace netscape (using netscape-2.01-2.deb) ...
> > Unpacking replaceme
ok and usr/doc)?
>
> BTW, what does TIA mean?
Thanks In Advance! :-)
Dwarf
---- --
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters
r as a user, but I can't seem to do both. Once root cranks up the
xserver, how does a user gain access to the server?
TIA,
Dwarf
---- --
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software
IA,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
mount -avt nonfs depends on the modules for filesystems (dos, sysv,
> etc)
If you don't want to move to a higher level kernel, then you don't want to
upgrade modules, image, or source. You may not want to upgrade sysklogd
although I had no trouble with it.
Luck,
Dwarf
-
er version of bash and try replacing it
to see if the problem goes away.
Anyone else have any ideas? I would hate to have to search the whole list
with a reboot in between each downgrade.
TIA,
Dwarf
--
aka Da
r has the matching package installed.
>Grepping the Contents.gz file searches among all packages available,
>whether or not they are installed.
>
What do you do if you don't have contents.gz?
Later,
Dwarf
--
ak
The following is the latest update of my upgrade notes for moving from R6
to 1.1 Debian. Feel free to let me know if any errors are being propogated
here.
Some notes on installation of the Debian 1.1 Beta Release.
The test bench for the information presented here is a Debian R6
installation. This
---- --
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
g-1.1.5elf.deb package can be installed
for use in the remaining installation. Once these upgrades have been made
tracking the latest version of dpkg is advisable.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1
s in that directory and then run
> dselect on the packages in the binary directories. Very simple to
> understand.
>
Works for me, as long as both the aout and the elf versions are available.
Luck,
Dwarf
--
aka Dale
k,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
If you don't see what you want, just ask --
During make config (second or third line) there is a line about config mod
version or something to that effect. You want to choose no for this option
then the modules should load correctly.
Luck,
Dwarf
--
aka Dale Scheetz
list by
the end of the week.
Luck,
Dwarf
--
aka Dale Scheetz Phone: 1 (904) 877-0257
Flexible Software Fax: NONE
Black Creek Critters e-mail: [EMAIL PROTECTED]
---
501 - 565 of 565 matches
Mail list logo
