The server for ftp.us.debian.org ran out of disk space earlier this
week. Implementing a raid has forced me to rebuild the archives for
both Debian and GNU. Hopefully this should be done soon. (If someone
can provide a faster rsync mirror than ftp.debian.org it will help)
Sorry for any inconveni
On Tue, Oct 17, 2000 at 01:59:23PM -0400, Dpk wrote:
The server for ftp.us.debian.org ran out of disk space earlier this
week. Implementing a raid has forced me to rebuild the archives
for both Debian and GNU. Hopefully this should be done soon. (If
someone can provide a faster
The server for ftp.us.debian.org ran out of disk space earlier this
week. Implementing a raid has forced me to rebuild the archives for
both Debian and GNU. Hopefully this should be done soon. (If someone
can provide a faster rsync mirror than ftp.debian.org it will help)
Sorry for any inconveni
On Tue, Oct 17, 2000 at 01:59:23PM -0400, Dpk wrote:
The server for ftp.us.debian.org ran out of disk space earlier this
week. Implementing a raid has forced me to rebuild the archives
for both Debian and GNU. Hopefully this should be done soon. (If
someone can provide a faster
The host ftp.egr.msu.edu (or ftp.us.debian.org) has been upgraded to a
Pentium Celeron 450 w/384 MB of RAM. An additional 18 GB of storage
was added and it is now directly connected at 100 Mbps full-duplex to
the MSU Gigabit backbone (with an OC-3 Internet link).
The Debian archive is available v
On Thu, Oct 28, 1999 at 02:42:18PM +0200, [EMAIL PROTECTED] wrote:
I own a Compaq Qvision videocard and I would like to know which
accelerated server I can use, so I can get a bet colordepth than 8
bit and a better resolution than 640x480 (my monitor can handle
that).
You will find a
On Mon, Nov 01, 1999 at 10:50:02PM +0200, Johann Spies wrote:
On Mon, 1 Nov 1999, peter karlsson wrote:
Johann Spies:
I get the following error mentioned in the subject line when
I want to read or save a html-attachment from a local
electronic newspaper
I have finally received all the hardware and ftp.egr.msu.edu is back
online. It should be healthy and reliable now for sometime:
1. The boot disk was replaced.
2. The network card was replaced.
3. A 105 GB SCSI Raid was added for Debian specifically.
It is still connected at 100 Mbps full-duplex
s for 'myhost.ml.org' and finds that IP aaa.bbb.ccc.ddd is
assigned to 'myhost.myisp.net'. Since 'myhost.ml.org' !=
'myhost.myisp.net' you get disconnected.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Divisi
> :0:
> * [EMAIL PROTECTED]
> ./mail/archive/debianuser
>
> :0:
> * [EMAIL PROTECTED]
> ./mail/archive/debianuser
>
Or be anal and conserve minute space on your harddrive:
:0
* ^(To|Cc)[EMAIL PROTECTED]
./mail/archive/debianuser
Dennis
--
dpk <[EMAIL PROTECT
What type of card is it? You will most likely have to add the
corresponding module or compile a kernel with support for the card you
have. There is a linux ethernet HOWTO at the following url:
http://sunsite.unc.edu/LDP/HOWTO/Ethernet-HOWTO.html
Hope that helps,
Dennis
--
dpk <[EMAIL PROTEC
Do you have scsi support and the aic7xxx driver compiled into your
kernel? If so '/proc/scsi' and '/proc/scsi/aic7xxx' should exist.
If not - download/install the kernel packages. The READMEs in
/usr/doc should help you out.
Dennis
--
dpk <[EMAIL PROTECTED]>, Netwo
What is your hostname?
I can manually add it to the /etc/hosts file to retreive the correct
information.
Thanks,
Dennis
--
Dennis Kelly <[EMAIL PROTECTED]> | phone: 353.4844
Network Admin, College of Engineering, MSU | pager: 222.5875
On Mon, 1 Jun 1998, matthew.r.pavlovich.1 wro
On Tue, 9 Jun 1998, Rev. Joseph Carter wrote:
>
> 1.4.x doesn't use .steprc, look in /usr/share for the things that go in
> ~/GNUstep/Library/Afterstep I think. And good luck configuring that mess.
> I've given up.
Join the club! I successfully configured 1.4 to function like my old
.steprc, h
On Wed, 10 Jun 1998, Steve Lamb wrote:
> On Wed, 10 Jun 1998 08:15:37 -0400 (EDT), dpk wrote:
>
> >I,... what are people switching to? Any recommendations for a fast,
> >slick, and easily configurable wm?
>
> Why not just stick with the 1.0 series?
Probably just m
On Sat, 20 Jun 1998, Steve Lamb wrote:
> Anyone know what is up with these two sites? ftp.debian.org appears to
> be refusing connections and ftp.us.debian.org looks like the daemon is there
> but inactive. :/
ftp.us.debian.org (debian.egr.msu.edu) had SCSI problems early today.
An fsck did
, however.
>
> To answer my own question, both ftp.debian.org and ftp.us.debian.org
> refuse connections to sites which do not reverse lookup. Pity. :/
I have turned off PARANOID for ftp... you should be able to get in
now.
Dpk
--
Dennis Kelly <[EMAIL PROTECTED]>
WindowMaker and related files can be found in:
ftp://debian.egr.msu.edu/debian/hamm/hamm/binary-i386/x11/
WindowMaker has quite a few dependencies, but you will find the
packages on the ftp site likewise, under the corresponding Section
directory.
Dennis
--
Dennis Kelly <[EMAIL PROTECTED]>
Do you have the libc5-dev package? I think the dl library is found
there.
Dennis
--
Dennis Kelly <[EMAIL PROTECTED]> | phone: 353.4844
Network Admin, College of Engineering, MSU | pager: 222.5875
On Sun, 21 Jun 1998, Christopher Fury wrote:
> I'm trying to compile perl5.004.04
an.
So removing '/pub' (using /debian/dists/hamm) will retreive the same
information from both ftp.mi.us.debian.org and ftp.debian.org.
Dpk
--
Dennis Kelly <[EMAIL PROTECTED]> | phone: 353.4844
Network Admin, College of Engineering, MSU | pager: 222.5875
--
To
Does anyone know of an alternative site that has
the debian packages that I might try?
Many thanks,
Katharine Osborne
Katharine,
Try debian.egr.msu.edu (ftp.mi.us.debian.org is another name for it).
Dennis
--
Dennis Kelly <[EMAIL PROTECTED]> | phone: 353.4844
N
Hash: SHA1
Hi All,
I am a newbie who is trying to upgrade from Debian 1.3.1 r6 to Debian
v2.0 ("Hamm"). However I am unable to find the Perl Base package
required for the upgrade using the autoup.sh script. Can someone point
me to the correct place? Thanks.
Best Regards
On Fri, 26 Jun 1998, Brian Morgan wrote:
[snip]
In either case, the map utility prompts me for a password to connect to
these resources. I've tried the root password, and all the passwords
for individual users, but it always comes back and says, "the password
is incorrect, please t
Can you help me with that share name thing? Does that go in the
global section? I've checked the man page for smb.conf, and still
couldn't find anything about this parameter. I've set the
workgroup for the appropriate windows workgroup name. Is this what
you were talking about?
Initially errors were that ef2sprogs conflicts with dump and perl
pre-depends libc5 (or something like that !)
After those errors things looked good for a while BUT then a million errors
( certainly too many to read ) scrolled up the screen and dselect again
gave up in disgust !
http://ftp1.us.debian.org/debian/dists/unstable/main/binary-i386/
devel/debhelper_0.97.deb
404 Not Found
I tried looking for the file on ftp.debian.org and it was not there.Any
idea where I can find it.
You can retreive it via ftp from debian.egr.msu.edu
(ftp.mi.us.debian.org)
Dennis
a million thanks - i just checked and sure enough dselect defaults to the
/stable directories - no doubt you are entirely correct !!!
surely many of the /stable packages are the same as the frozen dist and so
i do not wish to download yet again everything (8-10 hours M
while configuring the kernel i saw no option to choose iso9660 support
...did i miss something?
Under 'filesystems' click on 'yes' for 'Native Language Support
(NLS)'. Once this is done you will see iso9660, vfat, etc options.
[menuconfig came up in b&w instead of color (not that i
I have a long /var/log/messages and /var/log/syslog contain the
following. Can any one tell me what is the cause?
Thanks
Jul 5 10:28:19 superman -- MARK --
Jul 5 10:48:19 superman -- MARK --
>From the manpage:
-m interval
The syslogd logs a mark times
/etc/exports already has a few entries in it, yet dmesg doesn't
reveal that the init scrip's been called. When I call it manually
it tries to launch the daemons yet none of them starts up. At
least they're not there according to 'ps -a'.
When I launch rpc.nfsd manually I get th
Building the kernel with ramdisk and initrd support
rescue disk mounted in /mnt dir
cp /usr/src/linux/arch/i386/boot/zImage /mnt/linux
rdev /mnt/linux /dev/ram0
gzip -c /usr/src/Linux/System.map > /mnt/sys_map.gz
After booting, the disk start the existing linux partition, inst
And how can I build my own boot or root or whatever disk, that can
start the installation with my own kernel? The original has problem
with the aic7xxx driver if the controller is VLB based, and mobo's
hasn't PCI bios...
I wouldn't know off hand,.. maybe a developer will catch this
Hello,
i tried to install raidtools on 2.0.35 kernel ; It said:
You're using a kernel version older than 2.1.63. This package is
not designed to work with it. You should install the mdutils
package instead or upgrade your kernel.
hmmm afaik
1. 2.0.35 is newer then 2.1
ftp.mi.us.debian.org is currently down. We are having campus-wide
power problems. Unfortunately we have no estimate on the downtime
length. Thanks for your patience.
fyi.
Dennis
--
Dennis Kelly <[EMAIL PROTECTED]> | phone: 353.4844
Network Admin, College of Engineering, MSU | p
ftp.mi.us.debian.org is currently down. We are having campus-wide
power problems. Unfortunately we have no estimate on the downtime
length. Thanks for your patience.
fyi.
ftp.mi.us.debian.org is now operational again.
Thanks,
Dennis
--
Dennis Kelly <[EMAIL PROTECTED]>
It appears the power outages we experienced last week may have done
some disk damage to our ftp mirror of Debian! It appears I cannot
read the superblock on the ftp drive/partition.
I believe ext2 stores this information elsewhere on the disk and can
fix this by using something other than the def
I have searched the Debian and Samba website for answers, as well as
/usr/doc, and newsgroups for a resolution.
I would like to use encrypted passwords, but not have to maintain a
samba password file as well as /etc/passwd. Is it possible to do this
with Debian/samba? If so, could someone point
I am 'attempting' to install linux on a very old Pentium 90, however
when it boots a Slink boot disk I receive the following error:
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0x01f0-0x01f7
hda: ERROR, PORTS ALREADY IN USE
This error stems from the file, drivers/block/ide
On Tue, 8 Jun 1999 [EMAIL PROTECTED] wrote:
I have pine 4.10 sitting in /usr/local and was trying to get the
following .procmailrc to work (it's almost straight from procmailex
man page)
PATH=/usr/local/bin:/usr/bin:/bin
MAILDIR=$HOME/mail #you'd better make sure it exi
On Wed, 9 Jun 1999 [EMAIL PROTECTED] wrote:
[snip]
I'm still not quite sure how to make pine work with this either, I
can make 'incoming' and plain folders... but when making an
incoming folder it asks what host it is on, putting localhost makes
it think a lot, then do nothing, a
On Thu, 10 Jun 1999, Andrew J Fortune wrote:
> When you run pppconfig, and it asks for the modem port and the default
> says "/dev/modem", change it to "/dev/ttyS[0-3]", with the 0-3 being the
> number of the "COM port" your modem is on minus one. For example, if the
> modem is on
On Sun, 13 Jun 1999, Lance Hoffmeyer wrote:
As root I moved a directory structure. So that any user could
read/write files I recursively changed modes for all files and
directories to rw (i.e. chmod 666 *). Dumb me, eh? I now need to
recursively change all directories only to xr
On Thu, 17 Jun 1999, Ann Henderson wrote:
Thank you so much to William and David for their help with
"dselect", I got everything that I needed this time. Now I have
another problem. I'm trying to get Window Maker working and I
can't figure out what this means:
/usr/X11R6/bin/W
On Fri, 18 Jun 1999, Mario Jorge Nunes Filipe wrote:
Hi
Is there a way to configure the email server (sendmail 8.9.3) so
that it refuses mail coming from a specified address to a specific
email. Let me clarify:
My user A doesn't wan't to receive mail from [EMAIL PROTECTED] I
On Mon, 21 Jun 1999, Christian Dysthe wrote:
Hi,
I installed the pgp 2.6.2-us on my potato box. I use it with XFmail and it
works fine.
The problem is that I actually have friends running Windows (!) and
I can not verify their signatures. They use PGP 6.0.2 and when I
try
On Tue, 22 Jun 1999, Rigacci wrote:
I'm setting an IMAP server for math students. I wish the user
mailbox to be in each home directory, so quota can prevent someone
filling the /var/spool/mail.
I yet configured smail and pine to search for the user inbox in
${HOME}/mail/inbox fi
On Fri, 25 Jun 1999, Michael Meskes wrote:
Is there a tool that allows me to transform MP3 files back to WAV?
Michael
P.S.: Please CC me on your answer since I'm not subsribed here.
If you are not subscribed it might be beneficial to check the
mailing-list archives, as many a ti
On Fri, 25 Jun 1999, Mario Olimpio de Menezes wrote:
Hi,
I tried to setup the dhcp-beta (server) under slink. The machine
has two interfaces. I would like to serve only one, say eth1.
I edited the dhcp.conf file, the server was started but the
clients couldn't get
On Fri, 25 Jun 1999, Mario Olimpio de Menezes wrote:
> Under your 'some other options', make sure you include:
>
> option routers xxx.xxx.xxx.xxx; # This default gateway passed to clients
> option subnet-mask xxx.xxx.xxx.xxx # The subnet mask passed to clients
Yes, I did this.
On Wed, 7 Jul 1999, Jor-el wrote:
Hi,
I use exim as the MTA and the relay_domains option is not
set (commented out). When the smtp-server parameter is configured
in pine to be that for the machine running the MTA, I get an error
whenever I send mail to non-local addr
On Mon, 2 Aug 1999, Andreas Tille wrote:
Hello,
I'm sitting behind a quite slow modem. Coudl I gain a little more
speed with http or ftp addresses if I have the choice.
I have heard that people get slightly better performance with http,
hence the addition of the debian mirror bei
On Sat, 7 Aug 1999, Michelle Konzack wrote:
Hello,
I am using a Workstation on WfW 3.11 with my E-Mailer Eudora 3.06.
Now I upgrade to a Debian 2.1 Workstation and I like to keep all
E-Mails (around 300 MBytes) from my Windows Workstation. Disk
space is no problem !!! What
What do I have to do to have my make my Debian mirror an official site?
I didn't find contact information about this at the web site.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5
han OS/2; about the same as DOS; tons easier than Win95.
> What is the fuss about?
You now have to maintain a system. I know it's unheard of in Windows,
but that is who the fuss is from... I have no complaints here.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator |
You will have to make sure your NIC is supported under linux. You can
compile in support or add the module for it. Network configurations
are set in /etc/init.d/network.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Se
I'm feeling kind of sassy today, and thought I might try upgrading to
hamm. I have seen a script posted that help do this. I still have it
somewhere, however I was wondering where I could find the most recent
version of this and instructions/tips for using it?
Dennis
--
dpk <[EMAIL P
Have you read the install FAQ?
ftp://ftp.debian.org/debian/stable/disks-i386/current/install.html
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On Thu, 5 Feb 1998, David G. Deschenes
to use '--force-depends'. Or,
even better yet, combine them into one package since they both need
each other? Just curious if it was done this way for a reason...
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services
also loath to resort to a technically inferior solution simply
> because some users can't cope with the concept of circular
> dependencies, after all dpkg and dselect handle them just fine.
I would have to agree.
>
> --
> James
Dennis
--
dpk <[EMAIL PROTECTED]>,
Dvi is a 'tex' extension I believe. You can convert this to a postscript
file with the command 'dvips'.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On Mon, 9 Feb 1998, To
ut, 'last'
is blank again. I checked the libc5 -> libc6 miniHOWTO and didn't
here of any forwarning of this. I'm sure there is a quick fix, I just
need to have my face smacked into it.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Sounds like you have to install the package 'qpopper' on the mail
server. It is under the section 'mail'.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On Mon, 16 Feb 1998
.0=unstable=hamm=libc6(gnulibc2) release
You can use unstable packages (like kernel-source) if they do not
depend on libc6. I haven't tried reverse compatibility however...
someone else may know. I wouldn't see a problem though if dpkg doesn't
give you errors.
Dennis
--
dpk <[E
I would try using the command 'adduser', instead of 'useradd'. You can
find some default options for adding users in the file '/etc/adduser.conf'.
(like default shell, group, homedir etc)
>From my experience, adduser has been plagued with bugs in the pas
Since my hamm install, I have noticed that when users log out, sometimes
there shell hangs. These processes then beging utilizing lots of memory
and cpu. Once uptime reported a load of 4.05 from this! Killing the
processes resumes a more desired load.
Dennis
--
dpk <[EMAIL PROTECTED]>, N
I don't know if I'm still on the list as we had problems with our mail
server last night. I am using kernel 2.0.33.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On 9 Mar 1998, J
I have Adaptec 2940s in two of my Debian machines (one is our Debian
mirror) and have never had a problem. My cohorts at work use them in
a variety of situations with cd writers, scanners, etc. running
Windows 95 and NT. No complaints here.
Dennis
--
dpk <[EMAIL PROTECTED]>, N
On 13 Mar 1998, Ben Pfaff wrote:
>I upgraded to hamm about 2 months ago. I *still* have the problem with
>last/wtmp after following the instructions for removing the libc5 files
>and rebooting. I cannot use man:
>
>[EMAIL PROTECTED]:~] man man
>man: can't open /tmp/zman07736
ue to mail problems I was off the list for awhile, has anyone
found a viable solution for either?
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
--
E-mail the word "unsubscribe" to
each time! (Trying it over with the same CD of course) I have
plenty of disk space and this is the command I execute:
[EMAIL PROTECTED]:~] mkisofs -r -l -L -o cdimage /cdrom
Has anyone else experienced the same thing? This is Debian 2.0, and
all my packages are up-to-date.
Thanks,
Dennis
-
binary mess. I downloaded/compiled/installed the source
for ssh and haven't had any problem since! I know there is another
victim of this out there,.. I hope he can share the same solution.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engi
On Wed, 18 Mar 1998, Remco Blaakmeer wrote:
> On Wed, 18 Mar 1998, dpk wrote:
>
> > I previously had tried the steps of removing the wtmp, rebooting, etc
> > without success. I tried the libc6 upgrade procedure again, without
> > success also. It was due to
I would use the 'dump' program to do tape backups. (Found in 'utils' section)
It has a interactive tool called 'restore'. Once installed the documentation
under /usr/doc for it will get you going.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administr
Is there a way to retrieve the original filename when moving from a fat/dos
filesystem to ext2? A script/command would be nice, if it exists. If not,
is there an algorithm to extract this information?
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 35
d out as say 'filename' that was transfered
to a fat filesystem and was renamed by the system to 'filena~1'. Is there
an algorithm or way to retreive the original filename?
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Com
ave seen it for freeBSD. I would actually be interested in
packaging this software if someone could point me in the right
direction to do so.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On 2
How would I set the domain search order in /etc/dhcpd.conf? I couldn't
find it in the man page nor in my O'Reilly TCP/IP admin book.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page:
solver(5) for details.
I understand that, but I was hoping to set the search order information
for a Win95 client to my dhcp server. Does the dhcp daemon actually
send information found in /etc/resolv.conf to the clients?
On Fri, 27 Mar 1998 [EMAIL PROTECTED] wrote:
> On Fri, 27 Mar 1998, dpk
using cdrecord. Following the CD-Writing
HOWTO was a snap. In return I have burned around 7 CDs successfully, with
no misburns.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
--
To UNSUBSCR
the drive. How do I tell which
device it is? I looked at the SCSI HOWTO and it didn't say much
about them except for that exabyte tape drives are supported. I also
tried a few of the defaults without success.
Dennis
--
dpk <[EMAIL PROTECTED]>, Network Administrator | work: 353.4844
g
I forgot to include with my new kernel? The only driver I really need and
want is for the 3com card. Any help is much appreciated.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Enginnering Computing Services | page: 222.5875
--
TO
Yes Please!
Thanks,
dpk
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Enginnering Computing Services | page: 222.5875
On Fri, 24 Oct 1997, Matthew Tebbens wrote:
>
> I have a working setup for the 3c589. When I get home from work I'
Thanks for you help. My problem was that I didn't add support for
Advanced Power Management (APM). I would have never figured that...
Thanks again for everyone's help!
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Enginnering Co
Your system should most likely be supported; howerver, it sounds as if you
have a bad floppy. I would download the latest disks (kernel 2.0.29 I
believe) and try writing them to new/different disks. I have had this
problem before and the above procedure solved this for me.
Cheers,
Dennis
--
dpk
rg/doc/FAQ/debian-faq-3.html#ss3.4
3. ftp://ftp.us.debian.org/debian/stable/disks-i386/current/install.html
http://www.debian.org/doc/FAQ/
That should get you started.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing
I have encountered this same error before. You will have to recompile
your kernel - Make sure you include support for PCI BIOS and APM (Advanced
Power Management). Doing this resolved all my errors.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Divis
I get these same errors using samba (netbios) so it isn't souley related
to netatalk. I have received the errors ever since I upgraded from 1.2 ->
1.3. I would be interested also as to why this is so...
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353
I haven't received any mail from the list in awhile...
Is anyone still alive?
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-ma
Ahh... no wonder, I receive postmaster mail for egr.msu.edu and
some clown had a 60 meg email bounce back to our site and
filled our /var/mail!
Thanks!
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 22
shouldn't need to reboot.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On Thu, 20 Nov 1997 [EMAIL PROTECTED] wrote:
> hi..netterss..
>
> i'm new user in debian l
I don't know if this works under Linux, but under Solaris we (egr)
have used dump to do this. I would try using dump of a filesystem
to another filesystem. I'm no authority on this... so please
dispute me if I'm crazy.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Ne
What kind of errors does make/gcc report when you try to compile?
Don't forget you need to have APM (Advanced Power Management) and
PCI support compiled into your kernel... without them you will get
'unresolved symbol' errors.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]
Why are you trying to compile afterstep? There is already a
Debian package for it... but maybe you need to do so for a specific
reason. Just fyi.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 22
There are serveral... I use the mpg123 package because I'm not much into
the hassle of click and poke.
You can search for it at http://www.debian.org/packages.html. I'm sure
you will find others there too.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network |
,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Have you looked in your ~/.netscape direcotry for a file named
'lock'?? If it exists, quit your netscape applications and
rm ~/.netscape/lock and then restart. Sometimes netscape
will be improperly shut down and not remove its lockfile.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>,
Actually libXm.so.0 is also supplied by lesstif, the GNU motif libs,
which can be downloaded from a debian ftp site. It is under the 'libs'
dir... and a hell of a lot cheaper than the price listed below.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network |
the gateway once, just so it will switch... because one time I
rebooted my machine remotely from home, and then could not connect
to my machine at work! (hate when that happens)
Adding the ping fixes this problem, and have had no problems with it.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, S
Found this somewhat pertinant to Debian, especially since this
vulnerability was tested on a Debian machine... Just fyi.
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
-- For
are bad and what would be better! :)
Thanks,
Dennis
--
dpk <[EMAIL PROTECTED]>, Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On Wed, 3 Dec 1997, Luis Francisco Gonzalez wrote:
> Hi,
> my hard disk is getting too smal
1 - 100 of 234 matches
Mail list logo