I am in need of some help on not wanting some packages to be removed
when I try using either apt-get install (package name), or using
Synaptic...They both want to remove alot of packages that I do not want
to do a total of 512...
At one time I had this very same problem, I had mentioned i
Not sure if anyone else has had this problem, but here's what I am now
getting when I use synaptic to install a package...
/var/lib/dpkg/status near line 2873 package wine-utils missing version...
According to synaptic of installed packages, I do not have 'wine-utils'
installed, but at one time
I am trying to switch a HD from one computer to another, but when Grub
starts, I get a message saying ERROR 17...
Might anyone know what the ERROR 17 is, and how to correct it, so that
Grub will boot up the HD...???
Thanks to anyone that can help me out here on this one...
Larry/WD9ESU
--
73
Ok everyone I am back, with a problem on burning a CD...
All though I did finally burn one, but when I looked at the CD it did
not have all of the subdirectorys for which I need...
So with, that I used a new CD, now I have been having one heck of a time
trying to burn another one, using Xcdroast
Subject:
Re: Help needed...
From:
"Jamin W. Collins" <[EMAIL PROTECTED]>
Date:
Sun, 22 Dec 2002 08:50:04 -0600
To:
Debian-Users-List <[EMAIL PROTECTED]>
On Sun, Dec 22, 2002 at 08:40:56AM -0600, Larry Shields wrote:
Second, now when I bootup in Linux, it boots u
I am in need of some help, and I will try and explain as to what has
happened here...
First, I had a computer which was working using a 120gb HD running
Debian, the computer then after about 15 min's would shutdown on it's
own...This keeped on happening and I mentioned to the techs where I
[EMAIL PROTECTED] wrote:
Subject:
Re: Help please, apt-get update failing
From:
Rob Weir <[EMAIL PROTECTED]>
Date:
Wed, 11 Dec 2002 01:57:15 +1100
I seem to be having a problem now with APT-GET!...
When I now run apt-get update then upgrade, I get his:
Dynamic MMap ran out of room...
Problem with MergeList /var/lib/dpkg/stats
The package list or status file could not be, parsed or open...???
Can anyone explain to me what is needed to c
I have downloaded NetScape7's installer program, and it worked for
me...You might want to delete the installer that you now have and try
once again...
NetScape7 works just fine...
Larry/WD9ESU
snip
[EMAIL PROTECTED] wrote:
>
> ---
No I do not work for Libranet, but thought all of you who are on the
debian list, might want to check it out...I myself have been using
Libranets CD's since they first came out...An easy install, plus a full
year of on-line help, and libranets user list at
[EMAIL PROTECTED], for those that st
Hello John,
I have the same book Debian GNU/Linux 2.1, but never used the CD that came
with it...
I ordered a CD from http://www.Libranet.com, it comes with a full year of
Support Help, not any other vendor I know does this...
I will say this though, there CD was a snap to Install Debian, so befor
replace the Rockwell HCF
56K Data Fax modem, to have all of the same connections, or how have you
reconfigured everything with a different modem and have it work
correctly...??
Any information would be appreciated, thanks...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail
ne, or added it to the script...
ntpdate -b -s tick.boulder.noaa.gov
ntpdate -b -s potomac.nist.gov
Hope this helps...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail: wd9esu@ wd9esu.ampr.org
E-Mail: [EMAIL PROTECTED]
==
> Hello,
> I want to set my syst
take effect for your /dev/ttyS0 etc...Then add the #AUTOSAVE line back in...
Hope this helps...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail: wd9esu@ wd9esu.ampr.org
E-Mail: [EMAIL PROTECTED]
> Hello
> When I issue
> setserial /dev/ttyS0 irq 3 spd_hi
>
- Original Message -
From: "William Jensen" <[EMAIL PROTECTED]>
To:
Sent: Monday, October 09, 2000 5:19 PM
Subject: sudden apt-get update problem
I had the very same exact thing happen to me today also, with the same
output as you have shown...
I'll try it in the morning, and see if it
- Original Message -
From: "Noah L. Meyerhans" <[EMAIL PROTECTED]>
To: "Larry Shields" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, October 09, 2000 12:17 PM
Subject: Re: SSH ???
Thanks Noah, but that URL does not seem to work for potato, I typed it in
just as
just doing apt-get install ssh
>
> I believe that worked for me. Another way to search for options is the
following:
> apt-cache search ssh
>
> Good luck!
>
> isetr0
> On Mon, Oct 09, 2000 at 09:11:15AM -0500, Larry Shields wrote:
> > Can someone tell me the full name of
Can someone tell me the full name of the program ssh (SECURE SHELL), I tired
apt-get install, using ssh-1.2.27, and it does not seem to work for
me...Maybe I have the wrong version number any ideas...???
Thanks
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail: wd9esu
- Original Message -
From: "endroo" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, September 26, 2000 12:34 PM
Subject: CD distro
I suggest purchasing Libranets CD with a full year of HELP!...Better than
CheepBytes I can assure you of that...
Check it out at there Website, http://www.Libranet.c
settings, that way you
can setup your modem to use a different IRQ/IO...Modem Blaster 56II works
just fine, just make sure you open the box to make sure that it does infact
have selectable jumpers for IRQ & IO for Com1, 2, 3, 4...
Good Luck
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org
upgrade, then I
installed four new packages that I wanted, minicom, joe, apache &
junkbuster, it configured them all without any help from me...
Thought I'd mention this to you, and everyone on the list...
73 de
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mai
008, that is working, I'd definitely like
to hear from you...
My last resort, if I can not get it to work, then I suppose I will have to
send it back...
Thanks to anyone for help that you maybe able to offer...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail:
not work...
I have uncommented in the serial.conf script, ttyS16 through ttyS23, and
where it says /dev/ttyS16 set_multiport port1 0x107 0xff match1 0...
Now upon rebooting it does not seem to configure these ports correctly, any
help would be appreicated...
Thanks...
Larry Shields WD9ESU
AMPRnet:
rom you, or anyone would be appreciated, thanks...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail: wd9esu@ wd9esu.ampr.org
E-Mail: [EMAIL PROTECTED]
ICQ:6221703
> I've been using a Boca 8 port board for years, starting back with Linux
> version 0.99 or som
ve more artical's in there magazine
pretaining to Debian Linux...
Just a suggest...Thanks
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
BBS E-Mail: wd9esu@ wd9esu.ampr.org
E-Mail: [EMAIL PROTECTED]
ICQ:6221703
> Dear Linux Journal Subscriber,
>
> We are working our
they
can fix it without loosing any of my data on the hardrive...
Any help on this would be appreicated, Thanks...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
E-Mail: [EMAIL PROTECTED]
ICQ:6221703
If anyone can explain to me as to why I am now seeing this message come
across my screen while Debian Linux is up and running, and if there is a fix
for it...This just started yesterday...
hda: status timeout: status=0x80 {busy}
hda: drive not ready for command
ide0: Reset: Success
Thanks
Larry
If one makes a device say ttyS6, using 'mknod -m 666 /dev/ttyS6 c 4 70', and
after it is created, then decides it is not needed, what would be the
command to use to remove it...???
Thanks for any help one may offer...
Larry Shields WD9ESU
AMPRnet: wd9esu.ampr.org IPaddr 44.92.0.60
In
top, with all of the menus
showing TKDESK, DIRECTORY, COMMAND, BOOKMARK and OPTIONS, with three
columns...
Then I save it as it was, then exited the program and then tried it again,
it came up just picture perfect...
Thanks to those who had replied...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED
g the tkdesk
back to the full screen...???
I'd appreicate any help, thanks in advance...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED] [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
BBS E-Mail: [EMAIL PROTECTED]
E-Mail: [EMAIL PROTECTED]
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
to you and let you know that I did get your message, and I thank you
for it...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED] [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
and have had
no luck in doing so...
Thanks for any help that you can pass on to me I would appreicate it...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED] [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
to why this has happened would be
appreicated...
Thanks...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED] [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
I ment to say that I've installed X11R6 and not XF86Free, plus I am not sure
which is better or can one have both of these installed...
Thanks...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED] [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
stall, for it to have the look and feel of say WIN95...
It sure would be nice to be able to open a folder, copy files, create files
etc, instead of having to type every command to do this or that...
Thanks for any help that someone can pass onto me...
Larry Shields WD9ESU
AX25: [EMA
file... If so, what would be the correct info to put into the FSTAB
file...
Thanks for any help that you can pass on to me I would appreicate it...
Larry Shields WD9ESU
AX25: [EMAIL PROTECTED] [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
nyone
concerning this issue...Since I have tried all of the different settings, I
am at a loss as to what is needed to fix my problem...
Thanks,
Larry Shields WD9ESU
AX25: WD9ESU @ WD9ESU.#SCWI.WI.USA.NOAM [IPGWWI]
AMPRnet: wd9esu.ampr.org IPaddr: 44.92.0.60
ICQ# 6221703
JNOS 1.11C -- TCPIP/TELNET/FTP
==
37 matches
Mail list logo
