The /dev/hda7 has been utilized 100% so i would like to increase it to
22GB and /work to 2.6GB
Is it possible? If so how do i do it without data loss or
undestructively?
If you don't mind spending a bit of cash, have a look at 'Partition
Commander'
I got it fairly cheap on Amazon. Can move
I don't want the ability to create Canon printer control language: it's
up to the Mac and Windows computers to do that. I do want to know
whether the USB componentry is likely to work.
I use the canon i850 using the turboprint driver mentioned earlier. Works a
treat with cups.
Its
next partition, but another has / as the adjacent partion.
Is there anyway I can grow these partions and shufle/shrink the others
with out loosing information?
Thanks all
Glenn
Glen,
I had a similar problem. I looked at parted but on certain filesystems the
start of the partition had to
LeVA [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
Hi!
I'm wondering, if anyone is using an usb cd-writer under debian. How it
is working (which kernel, which modules etc...).
Yep. I'm using the Philips JackRabbit.. Works a treat. I'm now using it with
kernel 2.64 (USB2), prior
I had something like that a while back.
Using gnome-alsamixer solved my problem.
I don't run Gnome. However, I tried with alsamixergui, aumix, gamix,
and xamixer-0.4 without success, so I doubt gnome-alsamixer is going
to solve it...
Fair enough. I just thought I'd mention it because when I
Marc Shapiro [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
I have had this problem for a while, but since I don't use a lot of
Flash sites, I haven't worried about it. A recent apt-gt upgrade
installed a new Flash, however, and I thought I would check out the
sound. Still no go.
However, there is no sound. I have used alsamixer and pushed every
channel to 100% volume, but there is not a single tone that emerges
from the speakers, connected to Line Out.
I had something like that a while back.
Using gnome-alsamixer solved my problem.
--
Paddy
--
To UNSUBSCRIBE, email
Support [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
Hi! Debian Users
How to make a hole Debian O/S backup if I don't have any Backup
Device..?
Best Regards,
Support
Have a look at mkCDrec. I've used it to make a recovery disk of one of
our webservers.
Thanks, Paddy, that did it for me, too. Out of curiosity (as a Debian
newbie) what had gone wrong with the package upgrade?
Ollie
Glad to help.
I still class myself as a newbie to. It would appear to be a simple bug
with the way the libxft-dev was built.
If you noticed the line in the error
dpkg-divert: rename involves overwriting
`/usr/X11R6/include/X11/Xft/Xft.h'
with
different file `/usr/X11R6/include/X11/Xft/Xft1.h', not allowed
I had the exact problem with this upgrade upgrade.
What I did was to move Xft.h out of the way.
Try this;
cd /usr/X11R6/include/X11/Xft/
mv
video=i810fb:vram:2,xres:1024,yres:768,bpp:16,hsync1:30,hsync2:55,vsync1
:50,vsync2:85,accel,mtrr
Hi,
I removed the accel option and this resolved the issue. Not sure why it
never happend with lilo.
--
Paddy
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Hi,
I've been using the i810fb in kernel 2.6.x with no problems on sarge.
Below is the append line I used in Lilo;
video=i810fb:vram:2,xres:1024,yres:768,bpp:16,hsync1:30,hsync2:55,vsync1
:50,vsync2:85,accel,mtrr
(note: The hsync and vsync are not the actual values. I'm not at my
system and can't
I have just setup my new debian server. I m new in Debian and Exim.
How to configure exim only allow server ip and 192.168.0.2 to relay ?
Need HELP
You need to read the exim manual - see www.exim.org
Assuming your using debian woody then this link should answer your
question.
I'd greatly appreciate hearing about people's experiences of success
with
Debian on Dell, and related advice, suggestions, and working
configurations. Thanks in advance.
I use Debian Woody on a Dell PowerEdge at work. It came with RH which I
duly removed. The Server is not running X and so
Hi,
First, I'm running Debian Sarge with a custom 2.60-test9 kernel.
I'm having real problems getting Firebird+Flash to work with esound. I use
ICEWM and was happily using no sound server as I have no need for bell and
whistles on events, and call me primitive, but I can only listen to one song
or
Kristian Niemi [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
Thanks for the tip, but unfortunately that didn't help.
What do you get back from 'type java' (remove quotes) at the command line?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Kristian Niemi [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
I get 'java is /usr/bin/java'.
Which I assume is as it's supposed to be.
I believe it's a case of bug #225423,
http://bugzilla.mozilla.org/show_bug.cgi?id=225423
Which has been taken care of. It's just not implemented
Hugo Vanwoerkom [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
Hi list!
I did a Sarge dist-upgrade (after backing up the partition with
mondoarchive) and got 71 packages upgraded. It went with blazing speed
(4.4Kb/sec) on my 56kb line.
However...
After the installation I get
Strange that it works, actually, because it *is* a bug. Firebird
simply crashes; others have had the same problem. I believe they've
worked out a fix for it, but ...
So, wonder how come it works for you?
... or why it doesn't work for me...
Firebird needs jre1.4.2 or later.
Create a
Hi,
I have compiled the Kernel-source-2.6.0-test9 from testing. All is working
well with the exception of my smartmedia. This is giving me a 'wrong fs
type' 99 time out of 100 mounts. From what I've managed to find out 2.6 does
FAT checking that 2.4 (my previous kernel) didn't. There appears to
Hi I'm using Spamassassin with Exim on a Debian stable system. The version
of SA is a
backport from Debian Sid.
Everything is working fine except inbound PDFs attachments appear to be
defanged. When this happens there is also no SA tags in the header even
though it is being handled by the SA-Exim
The 'doc' and jpg emails come through with the
header tags and a
'doc' and jpg attachment.The PDF email comes through with no SA tags
header
and the pdf
is now inline ASCII. Neither of these two emails were tagged as spam
(which
is correct).
I have tried setting report_safe to zero but
The PDF email comes through with no SA tags header
and the pdf
is now inline ASCII. Neither of these two emails were tagged as spam
(which
is correct).
I have tried setting report_safe to zero but no change.
Also I turned on debug, and its as if spamassassin doesn't see it - it
logs
nothing
Hi,
I'm trying to unsubscribe this email address from this list because of my
mail server adding the disclaimer.
However all attempts to be removed have failed. I tried
[EMAIL PROTECTED]
four times now but after replying to the confirm message I get no response
but
the messages keep coming. I sent
four times now but after replying to the confirm message I get no
response
but
the messages keep coming.
What's the first line of the headers look like? For me, it says
- From [EMAIL PROTECTED]
Yep - same here;
- From [EMAIL PROTECTED]
Again apologies to the list for the disclaimer.
--
Could you post the full headers of a sample message you're receiving and
the unsubscribe message you sent?
--
Colin Watson [EMAIL PROTECTED]
Sample Header;
Received: from teamcard.scotcomms.co.uk ([x.x.x.x]) by mercury.scotcomms
with SMTP (Microsoft Exchange
Hi,
I upgraded to kernel 2.4.19 to allow me to add the i810 framebuffer patch.
everything went fine except I had missed the generic-scsi support
and so my cdrw didn't work. I turned this option on and recompiled. This
time when I went to install the resulting .deb I received a warning
about
27 matches
Mail list logo
