Our production system is using heavily perl (many thousand lines of perl5 code)
- it's mod_perl, but still perl.
Thanks.
Hello
For debian 11, service is just a wrapper to systemctl, is it right?
So for server management, both commands below have the same results.
sudo service nginx start
sudo systemclt start nginx
Which way is more prefered though?
Thanks.
--
Sincerely,
Ken Young
For standalone backup I am using Liteserver's VPS, 512G disk for only 2.4
EUR/m.
Then I setup rsyncd on it, and rsync data from clients via crontab for
backup purpose.
Sincerely,
Ken Young
On Tue, Mar 7, 2023 at 9:21 AM Celejar wrote:
> On Sun, 5 Mar 2023 14:05:37 +0100
> to...@tuxt
That's smart. Thanks
Sincerely,
Ken Young
On Mon, Mar 6, 2023 at 3:43 AM Linux-Fan wrote:
> Ken Young writes:
>
> > Hello,[1;5B
> >
> >
> > The methods I know,
> >
> > 1. scp
> > pros: the native tool in the OS
> > cons: you wi
The provider has separated block device service, like what Ceph does.
So I have to buy another 100GB block device as the secondary disk.
Sincerely,
Ken Young
On Mon, Mar 6, 2023 at 6:26 AM Andy Smith wrote:
> Hi,
>
> On Mon, Mar 06, 2023 at 03:11:43AM +0800, Ken Young wrote:
>
% /dev
tmpfs98M 496K 98M 1% /run
/dev/vda1 9.7G 1.5G 7.9G 16% /
...
So I want to add a block device /dev/vdb and fdisk/format it and mount it
as /home dir.
Since /home already exists (even have data in this path). can I mount it
without problem?
Sincerely,
Ken Young
Thanks for the suggestion. I will give it a try on mailbox.org.
Sincerely,
Ken Young
On Sun, Mar 5, 2023 at 9:05 PM wrote:
> On Sun, Mar 05, 2023 at 07:23:49PM +0800, Ken Young wrote:
> > What provider do you recommend then?
>
> Around here (West Europe), for example,
Is perl6 production ready?
I have not used perl for a long time.
Sincerely,
Ken Young
On Sun, Mar 5, 2023 at 7:28 PM Tom Browder wrote:
> My take:
>
> I use aliases heavily in my shell (bash), but I rarely use bash scripting
> at all.
>
> For any serious scripting, sinc
What provider do you recommend then?
Sincerely,
Ken Young
On Sun, Mar 5, 2023 at 6:54 PM wrote:
> On Sun, Mar 05, 2023 at 11:31:42AM +0100, Michel Verdier wrote:
> > Le 5 mars 2023 tomas a écrit :
> >
> > > The others I'd only use when forced to. Well, rclone, I thin
Hello,
The methods I know,
1. scp
pros: the native tool in the OS
cons: you will either input password or put key pairs into servers for
authentication.
2. rsync
pros: it can transfer data by increasement
cons: you need to setup rsyncd server and make the correct authorization.
3. ftp/ftps
On Sat, Mar 4, 2023 at 5:53 PM David wrote:
> On Sat, 4 Mar 2023 at 19:30, Ken Young wrote:
>
> > Do you know why my alias can't work in the bash script?
> > The info is as follows.
> >
> > 1) this alias does exist
> > $ alias |grep 'k='
> > alias
network. To solve this problem, you can do that:
> Create a pod in the same network with net tools.
> Or
> 1 .rebuild a new docker image with another version, with net-tools.
> 2. then change the current pod with edit in deployment.
>
>
>
> On Fri, Mar 3, 2023 at 9:59 PM
Hello,
Do you know why my alias can't work in the bash script?
The info is as follows.
1) this alias does exist
$ alias |grep 'k='
alias k='minikube kubectl --'
2) it also exists in .bash_profile
$ cat ~/.bash_profile |grep 'k='
alias k="minikube kubectl --"
3) the content of bash
Hello,
I have bitnami/mysql container (debian OS) running on kubernetes.
This container seems too restricted for system software, these following
commands are removed:
sudo (so I can't su to root for apt)
ping
dig
nslookup
net-tools
Do you know any other way to resolve a hostname by manual on
Here is the bug info
```
GNU Image Manipulation Program version 2.10.8
git-describe: GIMP_2_10_6-294-ga967e8d2c2
C compiler:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/8/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target:
to hearing from you.
Best regards,
Carol Young
Marketing Specialist
Greetings.
I have successfully installed debian (buster) on my ASUS UX430U and have
been using it for around one month without any severe problems. There are
however, some minor issues, that I would like to share with the community.
(This notebook does not appear on debian's supported hardware
Package: Pitivi
Version: 0.95-1+b1 amd64
Debian Version:testing
X11:xfce
Linux debian 4.5.0-2-amd64 #1 SMP Debian 4.5.4-1 (2016-05-16) x86_64 GNU/Linux
When I run pitivi and click new button,It can't create new project and
pitivi run over.
When I run pitivi on shell, shell print error code.
# 95-6164600-96048476-7-963
!--ET 94918072 K
http://goo.gl/5wnud
DG 53704111 K
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
I'm having the example same problem after my upgrade from Lenny to Squeeze
With SSL on this just gives me Internal Server Error without writing to the
logs:
Location /usvn-1.0/svn/
ErrorDocument 404 default
DAV svn
SVNParentPath /var/www/usvn-1.0/files/svn
On Thu, August 27, 2009 7:48 pm, Celejar wrote:
On Thu, 27 Aug 2009 19:18:28 -0500 (CDT)
David Young inf...@io.com wrote:
I installed gcc 4.3 using Synaptic, and the process seemed to have
succeeded. However, when I enter the gcc -v command, I get a bash:
gcc: command not found error
On Fri, August 28, 2009 8:16 am, Celejar wrote:
[Please reply only to the list and don't cc. me, as per the list CoC.]
Sorry. Rookie mistake.
On Fri, 28 Aug 2009 07:49:08 -0500 (CDT)
On Thu, August 27, 2009 7:48 pm, Celejar wrote:
On Thu, 27 Aug 2009 19:18:28 -0500 (CDT)
David Young inf
On Fri, August 28, 2009 8:52 am, Sven Joachim wrote:
On 2009-08-28 02:18 +0200, David Young wrote:
I installed gcc 4.3 using Synaptic, and the process seemed to have
succeeded. However, when I enter the gcc -v command, I get a bash:
gcc: command not found error.
Is there additional
On Fri, August 28, 2009 9:14 am, Sven Joachim wrote:
On 2009-08-28 16:07 +0200, David Young wrote:
On Fri, August 28, 2009 8:52 am, Sven Joachim wrote:
And please refrain from hijacking threads in the future. When you
have
a problem not already discussed here, write a new message instead
I installed gcc 4.3 using Synaptic, and the process seemed to have
succeeded. However, when I enter the gcc -v command, I get a bash:
gcc: command not found error.
Is there additional configuration to be done beyond the package install?
Thanks.
--
To UNSUBSCRIBE, email to
correct this problem?
Regards,
L.R. Young
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I want to get a copy of Debian, but I have a wierd computer, its a HP
Pavillion Ze4430us Laptop with a mobile AMD Athlon XP2400+
Which platform will work for me!?!?!?!?!
Please help!
Tyler
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
For some reason debian installed X with a really low resolution so I'm
trying to increase my screen resolution from 800x600 to something
like 1024x768.
I tried running dpg-reconfigure xserver-xfree86 and it returned
immediately without doing anything.
What is the procedure for reconfiguring my
Maybe the remainder of certain amount of course, we have never
xug.gif
Description: GIF image
I'm trying to access the parallel port (/dev/lp0) from a non root process. Basically I have a program that can only access the port if it runs as root. Here's what happens when I run as root:[EMAIL PROTECTED]:~/src/k74-
1.0# ./pprxtx all set[EMAIL PROTECTED]:~/src/k74-1.0# ./pprxtx read255[EMAIL
Young wrote: I'm trying to access the parallel port (/dev/lp0) from a non root process.
Basically I have a program that can only access the port if it runs as root. Here's what happens when I run as root: [EMAIL PROTECTED]:~/src/k74-1.0# ./pprxtx all set [EMAIL PROTECTED]
:~/src/k74-1.0# ./pprxtx read
It seems that the apache and apache installation has several problems.
I did a new install of Sarg (Debian 3.1r1) and chose as one of the
install options a web server. It installed apache, apache2,etc and I
added apache-doc but it seems like the installation has problems.
I'm unable to see the
I've installed php4 and related packages but the apache server doesn't indicate php support.
I edited the /etc/apache/http.conf file and added
# And for PHP 4.x, use:
#
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
So it will recognize the file
I'm trying to debug some issues related to php and locales and I see
that I have apache and apache2 packages installed. It's a bit confusing
when there are two /etc/apacheX directories to configure.
I'm simply trying to get php and MySQL working so I can experiment with them and get drupal
) xf86OpenSerial: Cannot open device /dev/input/mice: No
Such Device
On Wed, Jan 11, 2006 at 07:20:33PM +, Andrew M.A. Cater wrote:
On Wed, Jan 11, 2006 at 11:54:00AM -0700, Ed Young wrote:
I can't get X to start because apparently because the mouse device
can't be found, though the device
Title: Message
Can anyone recommend a good
content management system for me to set up. I want to have a News section, a
photo gallery, a blog, some articles, etc.
I used to use PostNuke, but I don't see it as a
Debian package anymore.
I'd prefer PHP/MySQL
but it's not a requirement.
Title: Message
I've been trying to
get my DWL-G510 Wifi card running. I've tried ndiswrapper with no success, and
am now trying to get madwifi working.
I am running Debian
3.1r1 and I added
deb http://http.us.debian.org/debian/
testing main contrib non-free
to my
/etc/apt/sources.list
Atheros chipset.
Thanks,
Ed
-Original Message-
From: Andrew M.A. Cater [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 12, 2006 1:38 AM
To: debian-user@lists.debian.org
Subject: Re: ndiswrapper -l doesn't return hardware present
On Wed, Jan 11, 2006 at 11:41:33PM -0700, Ed Young
Message-
From: Juergen Fiedler [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 12, 2006 7:06 AM
To: debian-user@lists.debian.org
Subject: Re: New install-Broken X-modprobe mousedev-now X Works, but
no mouse
On Wed, Jan 11, 2006 at 03:17:24PM -0700, Ed Young wrote:
Thanks for the reply.
It's
I solved this by following the note within XF86Config-4 about doing an
md5sum on the file when updating, and by doing a modprobe mousedev.
I was trying to set the mouse device stanza to specify my /dev/psaux and
PS/2 but It turns out I wasn't really updating the file.
Thanks to everyone for the
Title: Message
I can't get X to start because apparently
because the mouse device can't be found, though the device directory entry seems
to be there:
Falcon:/etc/X11# ls -la
/dev/input/micecrw-rw 1 root root 13, 63 2005-02-25 23:43
/dev/input/mice
The Mouse is a standard PS/2.
I'm
So when I added the mousedev module, X will run, but the mouse doesn't
work?
Any ideas?
Thanks,
Ed
-Original Message-
From: Karl O. Pinc [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 11, 2006 12:34 PM
To: Ed Young
Cc: debian-user@lists.debian.org
Subject: Re: (EE
I did a new install of Debian 3.1r1 and X failed out with a
/dev/input/mice no device found error.
I issued modprobe mousedev and then startx got x running, but the mouse
still doesn't work.
I added mousedev to /etc/modules and now when I reboot, X starts but
still no mouse.
I've run
Fiedler [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 11, 2006 3:06 PM
To: Ed Young
Cc: debian-user@lists.debian.org
Subject: Re: New install-Broken X-modprobe mousedev-now X Works, but
no mouse
On Wed, Jan 11, 2006 at 02:31:40PM -0700, Ed Young wrote:
I did a new install of Debian 3.1r1
Title: Message
I'm very confused.
Where does the XF86Config-4 file live? I thought it was in /etc/X11.
I also thought that
dpkg-reconfigure xserver-xfree86 was supposed to create a new XF86Config file.
I did an experiment.
I deleted (saved elsewhere) the XF86Config-4 file and tried to
Thanks everyone for helping lead me to the solution.
I had two problems:
1.I needed to change the mouse to /dev/psaux and specify PS/2 and
2. I wasn't updating the XF86Config-4 file ( I had read the note below
but misinterpreted it )
I had been changing the config but didn't realize that it
Title: Message
I have a Dlink
DWL-G510 that works find under Windows XP (dual boot). I'm trying to get it to
work with Debian3.1r1.
I'm following the
instructions at
http://www.linuxquestions.org/linux/answers/Networking/ndiswrapper_on_Debian_Sarge_without_having_to_compile_anything
After
Title: Message
I have a Dlink
DWL-G510 that works find under Windows XP (dual boot). I'm trying to get it to
work with Debian3.1r1.
I'm following the
instructions at
http://www.linuxquestions.org/linux/answers/Networking/ndiswrapper_on_Debian_Sarge_without_having_to_compile_anything
Yes, I'm running stable
However, I just issued
Apt-get -u dist-upgrade install testing
And I am in the process of upgrading to testing. I did this because I
needed to upgrade libc6 to 2.5.8 for madwifi-tools and because I got
confused by the hand rolling of madwifi using tarballs.
Once it's
My upgrade to testing broke X. It seems that the mouse device can't be
found
Here's the transcribed error from /var/log/XFree86.0.log:
(EE) XF86OpenSerial: cannot open device /dev/input/mice no such file or
directory
(E) Preinit failed for input device Configured mouse
Couldn't load XKB keymap,
Is there an userspace application to change the capslock to control?
In the old days it was the xf86Config file, but doesn't seem to be now.
Please advise and thanks,
Ed
capslock to control [ Ed Young [EMAIL PROTECTED]
]
Re: Dumb DNS [ Darryl Clarke [EMAIL PROTECTED]
]
Re: [Cygwin - Debian]: rysnc hangs [ H. S. [EMAIL PROTECTED] ]
Re: Question: Maximum number of dire [ Ron Johnson
[EMAIL PROTECTED] ]
Re: reply to list
I know it's possible to get higher resolutions, since it used to work
before re-installing debian recently.
when running
dpkg-reconfigure xserver-xfree86
I select either via or s3 and then all resolutions from 1280x102 on down.
I can provide any info to help diagnose things.
Thanks and Please
First of all, is there a good Debian kernel building howto?
When rebooting with a new kernel I get an error something like
kernel panic MODPROBE /lib/module/2.6.8/modules.dep no such file or directory.
This file exists the the above directory.
I installed the debian package kernel-source-2.6.8
I need some help getting this wifi card working under Linux. I have it
working ok under Windows.
lspci returns
:00:08.0 Ethernet controller: Atheros Communications, Inc.:
Unknown device 001a (rev 01)
I believe I need to use ndiswrapper to get this card working. It's
listed as supported in
://ndiswrapper.sourceforge.net/mediawiki/index.php/DebianNoCompiles
On 12/5/05, Ed Young [EMAIL PROTECTED] wrote:
I need some help getting this wifi card working under Linux. I have it
working ok under Windows.
lspci returns
:00:08.0 Ethernet controller: Atheros Communications, Inc
I'm trying to install madwifi to get my dwl-g510 wifi card working.
Atheros chipset.
I can't find madwifi packages when searching the stable branch, so I
downloaded the file madwifi-source_20041023-1_all.deb from
http://madwifi.sf.net
This package won't install because of dependency problems
Of
antgel
Sent: Monday, August 15, 2005 5:23 AM
To: debian-user@lists.debian.org
Subject: Re: madwifi, dwl-G510 and Debian 3.1
Ed Young wrote:
I'm trying to get a dlink DWL-G510 wifi board working with a Debian
3.1 system. Currently I'm running a stock 2.4.27 kernel.
So far the stock kernel
I'm trying to get a dlink DWL-G510 wifi board working with a Debian 3.1
system.
Currently I'm running a stock 2.4.27 kernel.
So far the stock kernel doesn't seem to see the card and reports only
the
onboard ETH0 ethernet.
I set this system up using my onboard ethernet as ETH0 but I want to
Type dmesg at the command line.
Cheers, Ed
-Original Message-
From: Wu-Kung Sun [mailto:[EMAIL PROTECTED]
Sent: Sunday, August 14, 2005 9:44 PM
To: Debian-users
Subject: reading boot messages
Hello all,
how can I read the boot messages? I've had some big problems today
which I'll
GET your U N IVERSI T Y D I PL0M A
Do you want a prosperous future, increased
earning powermore money and the respect of all?
Call this number: 1-315-546-9663 (24 h ours)
There are no required tests, classes, books, or
interviews!
Get a B a chelors, Masters, M BA, and D o ctorate
(PhD)
Hi All,
I've seen a number of 'HOWTO' documents on installing Debian on
Compact Flash, but most of the ones I've seen deal with installing
it once, and using stable.
Has anyone had any experience with using Sid, -and- keeping it
up to date with apt-get update and apt-get upgrade regularly ?
xMenuPopup
Does anyone know what the cause is? Has anyone else had the problem?
Yours,
Roger
Roger Young,
Philosophy Department, University of Dundee, Dundee, DD1 4HN
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi all,
I have a very strange problem. I'm trying to upgrade ssh on a potato
box, but dpkg always exits with the following error:
# dpkg -i ssh_1%3a3.4p1-0.0potato1_i386.deb
(Reading database ... 35706 files and directories currently installed.)
Preparing to replace ssh 1:1.2.3-9.4 (using
On Wed, May 08, 2002 at 04:28:51PM +1000, Rob Weir wrote:
I don't know anything about LVM, but are you sure you need the lvm 5
package?
Pretty sure, unless I'm doing something *drastically* wrong :)
From the output of apt-cache show lvm-common...
This package includes parts of the LVM
On Tue, May 07, 2002 at 01:38:22PM -0400, Matthew Daubenspeck wrote:
auto eth0
iface eth0 inet static
address 192.168.0.4
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.2
iface eth0:0 inet static
Hi,
It seems I must have posted this to the wrong list. Don't suppose
anyone could point me in the right direction?
Many thanks,
Simon.
On Tue, May 07, 2002 at 02:48:50PM +0100, Simon Young wrote:
Hi there,
I have recently installed woody, and everything is going fine except
for one
Hi there,
I have recently installed woody, and everything is going fine except
for one small problem; I'd like to use LVM (in conjunction with
reiserfs), but I'm having trouble installing the required packages.
Under potato, I would have just patched the kernel for lvm and done a
apt-get
i know i know...but i still would like to use it. i have telnetd installed,
hosts.allow and deny dont have anything in them, /etc/inet.d shows telnet
running bec. telnet works when the hostname/eth0 ip is used but not with the
inet addr... I would like to telnet to work over the internet even
Hello
which consumes lesser memory...galeon or netscape?
also, is there a fix already for the bug in galeon (more on mozilla actually)
as the archives suggest...?
pls tell me
Gdk-WARNING **: Missing charsets in FontSet creation
Gdk-WARNING **: ISO8859-1
howdy,
I know fdqn is fully qualified domain name but what is it's relevance? esp.
in apache...I want to setup an apache server in my local network (for practice
:)) but I get an error telling me that apache can't find my fqdn and it uses my
loopback address instead...
is it possible to
to do this I'd really appreciate it...
-Original Message-
From:Mark Lamers [EMAIL PROTECTED]
Sent:28 Aug 2001 13:32:26 +0200
To: [EMAIL PROTECTED]
CC: debian-user@lists.debian.org
Subject: Re: simple q: what is fqdn?
On di, 2001-08-28 at 10:17, michael young wrote
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everyone,
When I execute 'apt-get update; apt-get dist-upgrade', nothing seems
to happen. apt-get reports back that the packages are up-to-date. I
am pretty sure that they are not because before it was asking me to
update some GNOME libraries and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I noticed that there are several members PGP-signing their postings.
However,
the signature is MIME-formatted and appears as an attachment in my mail
client,
Netscape Messenger. Because there is no built-in PGP function, I am
forced to
copy/paste
All--
I'm installing Debian Potato on a new workstation. I have 2 disks, and I
wanted to put OS and apps all on one and user data all on the other. On
sda, I made a bootable partition and partitions for /, /usr, /var, /tmp, and
swap.
When I tried to make sdb all one partition, I couldn't
Hi,
I have a Mustek 1200 UB USB scanner. How can I get it to work with
Debian 2.2r2? I have successfully installed the USB module and it is
loading correctly upon booting. I suspect that the appropriate device
has not been created in /dev, but I don't know what it is supposed to be
called.
I
All---
And I thought the RedHat list I subscribe to was active!
I'm considering a switch from RH 6.2 to Debian stable for a dual-processor
workstation I use for crunching numbers and making graphs/plots with GMT.
I'm thinking about the move because I just can't keep up with manual updates
on RH,
cool, I don't think it will cause any problems, unlike
the perl one,
how are other Perl developers with Debian handling this?
On Mon, 30 Apr 2001, Colin Watson wrote:
Aaron F Young [EMAIL PROTECTED] wrote:
i'm very new to debian
though i've been doing linux for a few years now
i'm making
hello all
i'm very new to debian
though i've been doing linux for a few years now
i'm making my way through all the documentation
but there is something i'm not seeing right now (meaning i am not sure where
this is in the docs i'm reading so if you know, let me know)
but i want to be able to
recently installed xfree86-4. now when I try to
start x I get:
waiting for X server to begin accepting connections
..
...
.
and so on...What else do I need to do?
tia
pls cc me since I'm not in the list
___
Visit
it was.
Any ideas?
--
Niall Young
Linux Solutions -- www.linuxsolutions.net.au
Providing Internet and Audio/Video Solutions and Consulting
PH: 0407 421 537 -- PO BOX 1117, Gwelup
I have an Intel386, with 3.5"-1.44MB
5.25"-1.2MG floppies, a Backpack CDROM on my parallel port, andWDC
AC21200H 1279MB hard drive1 and aST3145A 130MB hard drive2, VGA, Serial,
yada yada. Your hardware requirements says the system should have 12MB
RAM. Any chance I can get my system
Attn: to all great programmers out there..
Hoping that somebody please help me out with this problem?
sum()
{ for x=1 to 10 do
var=var+1
}
shared int var=0 //shared variable
fork(sum, 0);
fork(sum, 0); //executing two concurrent processes
I can't figure this one out...my questions are:
Colquhoun, Ian: wrote:
First let me apologize for the seemingly basic question but I have exhausted
all the documentation on apt and I don't know where else to turn.
What I'm trying to do is to get apt-get to work through a SOCKS firewall.
Now, I basically know nothing about SOCKS but I
Can anyone point me to a set of tools to create custom Debian boot disks to
automate installation (via packages or an NFS image), maintain the custom set
of packages/image, maybe combine all of this with a subset of the Debian CD and
create a bootable CD version?
--
[EMAIL PROTECTED]
,
--
-
David E. Young
Fujitsu Network Communications The fact that ... we still
([EMAIL PROTECTED]) live well cannot ease the pain of
feeling that we no longer live nobly.
-- John Updike
bytes
mmuctxs : 8
mmupsegs: 256
kernelpsegs : 34
kfreepsegs : 0
usedpsegs : 53
ufreepsegs : 132
user_taken : 2
max_taken : 146
Regards,
--
-
David E. Young
Fujitsu Network Communications
to run fine. If someone has an idea of a fix, please let me
know. Otherwise I'll revert to 2.1 until potato is officially
released. Also, if I can offer any more information please ask. Thanks
much.
Regards,
--
-
David E. Young
,
--
-
David E. Young
Fujitsu Network Communications The fact that ... we still
([EMAIL PROTECTED]) live well cannot ease the pain of
feeling that we no longer live nobly.
-- John Updike
Programming should be fun,
programs
When I boot one of my computers, I get a "memory overflow" error "please
insert another disk". Can you help me?
.
If I'm installing the wrong packages, which ones do I need?
I upgraded using apt-get update, apt-get install libgtk1.2. I then did a
full dist-upgrade with apt-get dist-upgrade and got the same result...
Thanx in advance,
Ed
--
**
Ed Young
Echostar Software
, the www.hp.com site, and such without any
luck.
Thanks in advance,
Gary Youngbegin: vcard
fn: Gary Young
n: Young;Gary
org:Motorola SPS IT
adr:Motorola Piedmont Office - Cube 41D;;9801 South 51st Street;Phoenix;AZ;85044;USA
email;internet
between the kernel in Debian 2.0
and in Debian 2.1 fails on something in my
hardware. I'll look at what hardware is
in the box next.
Garybegin: vcard
fn: Gary Young
n: Young;Gary
org:Motorola SPS IT
adr:Motorola Piedmont Office - Cube 41D;;9801
]
Code: 81 39 aa ff 55 00 0f 85 23 01 00 00 8b 41 04 89 43 04 8b 43
I am using the Linux Central i386 disc 1 Debian GNU/Linux Release 2.1
CDROM. Does anyone have any ideas on where I should look next?
Garybegin: vcard
fn: Gary Young
n: Young;Gary
org
as the operating
system.
(I attempted to do a boot:floppy but after
I insert the root diskette, it gets a protection fault.)
Is there a work around for the compressed image
problem, or am I missing something about Linux with
SCSI drives.
Gary Youngbegin: vcard
fn: Gary Young
n
Subject:
R
Date:
Fri, 23 Jul 1999 11:28:23 +1000
From:
Doug Young [EMAIL PROTECTED]
To:
virtanen [EMAIL PROTECTED]
References:
1
shudder shudder !
God save us from experts who think EVERYTHING
Thanks Tyler another example of the problems newbies face
with present documentation
- Original Message -
From: tyler spivey [EMAIL PROTECTED]
To: Doug Young [EMAIL PROTECTED]
Cc: debian-user@lists.debian.org; recipient list not shown: ;
Sent: Thursday, July 22, 1999 1:17 AM
Subject
I think I posted a response to this already, but if not here it is.
From a newbie point of view, the actual root of the problem
faced by newbies in trying to come to grips with any unix
based operating system is NOT that there is insufficient
documentation ... but rather that there is TOO MUCH,
Date:
Wed, 21 Jul 1999 20:02:19 -0400 (EDT)
From:
[EMAIL PROTECTED]
To:
Doug Young [EMAIL PROTECTED]
hello,
now i understand the source of your problem. you are trying to use a
copy of lynx found on a distribution copy of linux. just a suggestion,
linux
Hear hear . hope someone else takes this stuff on board
Date:
Thu, 22 Jul 1999 10:08:46 +1000
From:
Carley, Jason \(Australia\)
[EMAIL PROTECTED]
To:
'Nate Duehr' [EMAIL PROTECTED],
debian-user@lists.debian.org
Good note
1 - 100 of 156 matches
Mail list logo
