Dear Andersson,
Thanks for your reply.
It is because our Vendor highly recommends us to purchase a new server to
install Debian 12. Therefore, I seek your expert opinion.
Best Regards,
Keith Cheng | Officer (IT)/HQIP
Tel: 3907 6721 | Fax: 3165 1106
From: Anders Andersson
Sent: Wednesday
Dear Colleagues,
Can I install Debian 11 or 12 with "Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz"
CPU?
Do they both support the following application
Nginx 1.22.1
PHP 8.2.7
Mariadb 10.11.4
On the other hand, may I know the minimum requirement of Debian 11 and 12?
Best Regards,
K
hello everyone,
I'm using an old graphic card on my debian PC, which is HD 6770,
and these days i've got a new display that support 2k resolution
(2560x1440),
but on the Display Setting dialog, btw, my DE is XFCE4, the highest
resolution is 1920x1200.
i've tried to generate a Modeline with
On Wed, Dec 26, 2012 at 11:27 PM, piruthiviraj natarajan
wrote:
> I recently moved from Arch Linux to Debian Wheezy.
> Is there any way to clean the apt cache for the packages that I am not
> currently using?
>
> I tried using this config
> root@localhost:~# cat /etc/apt/apt.conf
> APT::Clean-Inst
--
*You can not hide it because the news will soon be every where if you dont
get back to me on time, i have some pictures of it with me and i am ready to
expose you to the world if after 2 day you do not get back to me, don't try
to thinks of how i knew it because it is a mystry. you sins have fo
AIL PROTECTED]> wrote:
> From: Celejar <[EMAIL PROTECTED]>
> Subject: Re: debian-user-digest Digest V2008 #1906
> To: debian-user@lists.debian.org
> Cc: [EMAIL PROTECTED]
> Date: Tuesday, October 28, 2008, 9:41 PM
> On Tue, 28 Oct 2008 13:19:31 -0700 (PDT)
> Fu-Tun
Hi Andrei,
Thank you for the reply!
I think it’s sarge. It has been quite a while since it was installed so the
details are somewhat lost but I think it was a full cd/dvd install.
Not sure if this tells you the version of the install or what a good way to
find out would be.
SSH-2.0-OpenSSH_3
Hi,
I am a rookie debian user and I am not sure how to get around this error. Any
advise or pointers appreciated.
Fu-Tung
# apt-get install ssh
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
coreutils cramfsprogs dash debianuti
I am here to ask this question because I found some people in the local
forum have the same problem with the mailscanner. So I think maybe
somebody has successful experience of installing mailscanner in Debian box.
Thanks
Ugo Bellavance wrote:
>Cheng-Han Tsai wrote:
>
>
&
anner" told me that it is fine, but actually it just stop
working !!! There is nothing in the log. Does anybody know what happen
?? Thanks.
Cheng-Han
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ndows when ever I have to access my work computer.
TIA
--
,;";,
/\_
( /
(() //)
| \\ ,,;;'\ Alexander (Axle) B. Cheng
__ _( )m=(
/' ' '()/"&
after compiling kernel 2.6.5
Pericles Cheng wrote:
>> Device Drivers -> Networking Support -> Ethernet (10 or 100 MBit)
>> - Generic Media Independent Interface device support
>> - RealTek RTL-8139 PCI Fast Ethernet Adapter support
>
> PC - These drivers are alrea
Pericles Cheng wrote: > I cannot find those options in the kernel menuconfig. I added the> specific Realtek options except the experimental one. Device Drivers -> Networking Support -> Ethernet (10 or 100 MBit) - Generic Media Independent Interface device support - RealTek
I cannot find those options in the kernel menuconfig. I
added the specific Realtek options except the experimental one.
I believe though that the problem comes before loading the
modules since I see some errors when logging that are not for the network card.
I cannot see the same errors
Hello everyone. This is the first time I ever subscribed to a list so bear
with me.
I installed Debian on an old IBM Intel PII machine and added a TrendNet
TE100-PCIWN PCI ethernet card. It was recognized immediately and everything
worked fine (disregarding video card problems, but that will co
me feedback on this that would be wonderful.
TIA
Alex
--
,;";,
/\_
( /
(() //)
| \\ ,,;;'\ Alexander (Axle) B. Cheng
__ _( )m=(
/'
o fool.
> -- Richard Feynman.
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
>
Great it worked great... thanks :)
--
,;";,
/\_
TIA
Alex
--
,;";,
/\_
( /
(() //)
| \\ ,,;;'\ Alexander (Axle) B. Cheng
__ _( )m=(
/' ' '()/"' '.(, | Kingsmen Associates
,;( )|| | "
,;' \/-(.;, )
) / ) /
// ||
)_\ )_
On Mon, 08 Mar 2004 09:07:37 +
Tim Beauregard <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Edward Murrell wrote:
> | On Mon, 2004-03-08 at 19:35, Alexander B. Cheng wrote:
> |
> |>Hello All,
> |>
> |>I've jus
of returns for this error. If anyone can give me
some ideas or a fix that would be greatly appreciated.
TIA
--
,;";,
/\_
( /
(() //)
| \\ ,,;;'\ Alexander (Axle)
My box is a P4 Xeon whitebox server w/ 1Gram, 3ware
7506-8 raid card hooked
with 4x 160G maxtor HDD as RAID 5.
Debian Sarge
Plain 2.6.3 kernel
LVM on root partition.
XFS(built as module) filesystem on all partitions
except /boot which runs on
reiserfs
I have lots of stories to tell about this serv
y it's
not working. Anyone can give me a hint on what I did wrong?
TIA
Alex
--
,;";,
/\_
( /
(() //)
| \\ ,,;;'\ Alexander (Axle) B. Cheng
__ _( )m=(
/'
Hi:
This is Jackson, and I'm now having a problem with the package SSL. I was using my real IP for my first installation with SSL (apt-get install apache-ssl), then I got a warning message saying that "[alert] apache-ssl: Could not determine the server's fully qualified domain name, using 127.
LogJam is a client for LiveJournal.com. For more information, you can
find it at http://www.livejournal.com . As for gcc, I am not too sure
what you are asking for... Good Luck!
Jeremy
Matt Price said:
> hi everyone,
>
> I've noticed frequent references in this list to the 'gcc logjam'.
> Now
When I first built the drivers, I had an older 64mb nvidia agp in there
and didn't have that problem. However, since the older one is starting to
tweak out, I had to replace it with this newer one that's a 64mb Geforce 4
MX440SE-T. I redid the process starting at the /usr/src/linux. Would
wiping
I have successfully built the nvidia drivers and Gnome is looking great.
However, when I logout of X and return to console, my monitor displays a
box that says "Monitor is working, out of scan range, change PC settings"
It also happens when I do ctrl-alt-F* into any other terminals from X.
Does
Sorry, I left out the "-o" in the previous message.
Jeremy
Joseph A Nagy Jr said:
> jan-jr-ent:~# smbclient -L //hal9001
> added interface ip=192.168.1.11 bcast=192.168.1.255 nmask=255.255.255.0
> Got a positive name query response from 192.168.1.10 ( 192.168.1.10 )
> Password:
> Domain=[THE_MAT
Try leaving out the fs in mount -t smbfs. So it would be "mount -t smb
//server/resource /mountPoint." The problem with that is you have to make
sure that your kernel is configured to support smbfs. If you don't find
any sucess in what I just said, you can install the debian package smbfs
and i
I have always downloaded straight from Sun's website(tarball) and it works
fine for me. You can consider that
Jeremy
---
Rob Weir said:
> On Wed, Mar 05, 2003 at 01:29:19PM -0300, Gilberto Garcia Jr. wrote:
>> 2) which is the easiest way to upgrade jdk 1.3.1 to jdk 1.4.1?
>
> You can get th
Anyone have any experience with the EagleTec ET-WL322 PCMCIA wireless
card? Is it supported by the Linux kernel and Debian? I went through all
the documentation and could only found stuff on the ET-WL300 Any
advice will help. Thanks!
Jeremy
--
HK Tech. Research Group
Linux developement pr
Well, guys, I fixed the keyboard problem by doing a "dpkg-reconfigure
console-data" Why didn't I think of that earlier instead of fighting
with it for so long. Anyway, the mouse is not fixed though... so I am
still open for advice for that. Thanks
Jeremy
Jeremy Cheng sa
Speaking of strange problems, I have a load of them. The biggest one is
that ever since I upgraded the motherboard of my server, I have not been
able to type in console. The key set is all messed up(ie, I type j and
another character comes up and F7 is backspace,etc). However, if I find a
way to
AIL PROTECTED]
Your sincerely,
Wang jin cheng
您好:
我合法的拥有一些非常有价值的域名,他们可以用来创立有前途的游戏网站,
他们是:www.USpig.com,www.ChinaPig.com,www.RussiaPig.com,www.SuuGuu.com
GuuGuu.com,此外,我还有一些可以用来创建色情网站的域名:www.hitfuck.com,
stopfuck.com,www.RussiaFuck.com,www.RussiaAdult.com
现在,我想卖掉这些域名,如果您想购买或者想与我合作来共同开发这些宝贵的
域名资源,请与
f.com,www.RussiaDrink.com,
www.RussiaMilk.com".
Now , I want to sell these domain names ,if you want to buy or
co-operate with me ,please contact me by
E-Mail: [EMAIL PROTECTED]
Your sincerely,
Wang jin cheng
您好:
我合法的拥有一些非常有价值的域名,他们可以用来
Hi,
I am a newbie of Debian. I tried to install the potato version of
Debian for like the nth time and still couldn't get my mouse worked. The
mouse doesn't follow my hand motion and moves erratically on the screen
in X. The protocol in XF86Config is "PS/2" and the device driver for the
mo
g has shown
up in my logs, no port scans, no TCP/IP connections, nothing in my
Apache and proftpd logs.
Any thoughts?
Thanks for the help,
Cheng
s apparently a problem with the unresolved rpc symbols in the new libc.
You can check for yourself by doing 'ypserv -d'. There's also an open bug
report at bugs.debian.org/cgi-bin/bugreport.cgi?bug=97195&repeatmerged=yes
Currently the only workaround I've seen is to rebuild ypserv with the new
libc.
HHTH,
Cheng
I am a relatively new Linux user. I've used RedHat and Slackware before and now
I'm switching to Debian. My questions is about the possible problems I may face
if I install kernel 2.4 as well as the advantages it'd might have.
First, I'm used to installing distro off of bootable CDs. So Instead
to do this.
Any hints/advice? Both boxes are currently running unstable.
Thanks in advance,
Cheng
Hi all,
Perhaps after an abnormal shutdown the files list file of dpkg was
damaged. Now I cannot dpkg -i or apt-get install anything. It complained
about "dpkg: error processing :
files list file for package `libgnome-pilot0' is missing final newline". I
tried to remove this and its depen
main contrib non-free
to your sources.list file, and then run apt-get again.
Hope this helps,
Cheng
Does anyone know how to configure either exim or mutt so that I can
request and receive read receipts for my email?
Thanks for any help in advance,
Cheng
You porbably mounted your filesystem as msdos instead of vfat.
Cheng
nd then run 'apt install libapache-mod-perl'. I don't know
why but it refused to "upgrade" the mod-perl lib. for 1.3.13.
Cheng
pgpopqNWYYvqE.pgp
Description: PGP signature
> anybody the debs of apache-common_1.3.13 or 1.3.12 and apache_1.3.13 or
> 1.3.12 left to mail me? libapache-mod-perl requires apache <= 1.3.13 and
> woody's current version is 1.3.14
I think it's been fixed. mod-perl now works with 1.3.14.
Cheng
pgp1uZbY9YmmV.pgp
Description: PGP signature
On Wed, Dec 06, 2000 at 07:49:20PM -0800, Eric G . Miller wrote:
> On Wed, Dec 06, 2000 at 09:41:22PM -0600, Cheng H. Lee wrote:
> > On Wed, Dec 06, 2000 at 08:22:46PM -0700, JD Kitch wrote:
> >
> > > X: user not authorized to run the X server, aborting.
> >
> &g
On Wed, Dec 06, 2000 at 08:22:46PM -0700, JD Kitch wrote:
> X: user not authorized to run the X server, aborting.
For the recent XFree86 4.0.x package, check in /etc/X11/Xwrapper.config
Set "allowed_users=console". If you run xdm (or gdm), it has to be set
to "anybody"
Cheng
ult-foreground' variable.
However, trying to change it to white through my .sawfishrc doesn't seem to
work; when checking the value in sawfish-client, it is set to white, but the
font is still black.
Any solutions?
Thanks in advance, Cheng
Yes, the site was down for a bit earlier today. It's back up now as of
1:40 a.m CST.
Cheng
> Dear debian-users,
>
> I decided to take the plunge and add the HelixCode site to
> sources.list, and 'apt-get install task-helix-gnome
> task-helix-gnome-dev' -- I fig
to this one that you might want to enable. The
IP Masquerading HOWTO from the LDP will help you pick the correct kernel
options. URL: http://www.linuxdoc.org/HOWTO/IP-Masquerade-HOWTO.html
Cheng
this requires me to ssh in as a normal user then su to root.
Cheng
can).
One
other place that might have something to do with this is the 'shortcuts'
section of
the sawfish config tool. Unbinding the 'Button1-Click' and 'Button1-Up' events
in
the window and title context may solve your problem...again, a word of caution,
this
can possibly lead to some really weird behavior.
Cheng
nsole-apt, what are the differences between
> console-apt and dselect (which one should i use?)
Not sure what the exact differences are. Personally I prefer apt over dselect
unless I'm not sure exactly what package(s) I'm looking for. In my experience,
apt does a better job of checking for dependency problems.
Hope this help,
Cheng
indow managemnet polices. How can I get
> this set up to act like that?
In GNOME control center, there's a section for the sawfish window manager.
Both of these settings are under the 'focus' sub-section.
Cheng
debian.org
I would suggest adding a non-US mirror to your sources.list just for
convenience sake. Insert a line like this:
deb ftp://ftp.de.debian.org/debian-non-US stable/non-US main contrib non-free
You can then 'apt-get libssl095a' to grab the package.
Cheng
> I can not find this device in /dev. Unfortunately, MAKEDEV does not know
> how to create it.
I don't think you have to...when I setup gpm, it was created automatically.
Cheng
- Original Message -
From: Kevin Cheng <[EMAIL PROTECTED]>
To: debian ; Matthew Dalton
<[EMAIL PROTECTED]>
Sent: Friday, September 22, 2000 2:16 PM
Subject: Re: Internal routing
> I have done that already.. and it doesn't work, thatz y i think it is so
> strange
&
I have done that already.. and it doesn't work, thatz y i think it is so
strange
- Original Message -
From: Matthew Dalton <[EMAIL PROTECTED]>
To: Kevin Cheng <[EMAIL PROTECTED]>
Cc: debian
Sent: Friday, September 22, 2000 1:42 PM
Subject: Re: Internal routing
>
- Original Message -
From: Kevin
Cheng
To: debian
Sent: Friday, September 22, 2000 12:21 PM
Subject: Internal routing
Hi,
I have a problem regrading the debian linux (kernel
2.3) internal routing. I have 2 NICs installed on my machine, one to the local
LAN and the other one
Hi,
I have a problem regrading the debian linux (kernel
2.3) internal routing. I have 2 NICs installed on my machine, one to the local
LAN and the other one to the internet. I should have all the things setup
correctly, like ipconfig and route...
I can ping the outside world and the local L
Hi all,
I am having trouble on installing the base system
-- base2_1.tgz
Everytime after I installed the base system, it
will just bring me back to the installation menu that ask me to install the base
system again
I have basically tried every method install
from 7 floppies, fr
Hi all,
I am in deep trouble in installing the
Debian...
I got a CD-ROM version (2.1) and everytime when i
am in the base system installing process, it can't get thru. It prompts me a
screen saying that it is extracting the base2_1.tgz file; yet, after all, it
just return to the main menu
I have wine in my system, but it still does not work
well yet. My guess is that your need change the setting
in file wine.ini or ~/.winerc . Probably you forget
to create a windows directory in your c:\ drive or point
it to the wrong direction. Hope this works.
-cheng
On Sat, Dec 12, 1998 at
I tried this. But it still doesn't work. :(
-cheng
On Thu, Dec 03, 1998 at 10:14:51PM +, David Coe wrote:
> have you tried doing both at the same time? i.e.
>
> dpkg -i libc6_2.0.7u-6.deb sysvinit_2.76-2.deb
>
> [EMAIL PROTECTED] wrote:
> >
> > I want
Recently, I bought a QuickCam. Can someone tell me which debian package
can be used for QuickCam.
Thanks
Anthony
When I installed hamm 2.0, at first, I choose to turn off shadow password
system. Now I want to turn on the shadow password system. How do I do it?
Thanks
Anthony
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
Hello all,
I have problems with fetchmail. Everytime I execute fetchmail -a -F to
download emails from my ISP server POP3 protocol, it justs hang there. But if
I use netscape mail to download email using POP3 protocal, there is no
problem.
Can someone tell me what's wrong?
Thanks
Anthony
--
Hello all,
Maybe I ask the wrong place. However, I have no troubles in compiling
kdesupport in bo. But now in hamm, I cannot compile it. The error is :
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/qt/include -O2 -Wall -c
-fPIC -DPIC QwSpriteField-double.cpp
In file included from QwSpriteField-do
Hello all,
I have just installl hamm in a new computer . However, when I try to
compile qt-1.33, I ran intot errors:
Mozart:/usr/local/qt# make
cd src/moc; make
make[1]: Entering directory `/usr/local/qt/src/moc'
gcc -c -O2 -fno-strength-reduce -Wall -W -I/usr/X11R6/include
-I/usr/local/qt/includ
On Mon, 1 Jun 1998, Cheng Dien Yiu wrote:
> Hello all,
>
> I have great deals troubles after upgrading to 1.3.1r8. I wish I would
> never do it.
> First I have troubles sending email using through. When I try to send it,
> it gives me the error.
>
> [Error sending:
Hello all,
I try the command to test my email connection 'telnet localhost 25', but
it gives me the error:
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
However, I have '127.0.0.1 localhost' entry in my /etc/hosts file.
Another problem is that I hav
Hello all,
I have great deals troubles after upgrading to 1.3.1r8. I wish I would
never do it.
First I have troubles sending email using through. When I try to send it,
it gives me the error.
[Error sending: 421 SMTP connection went away!]
Another problem is that I have troubles download email
cessfully configured my sound card :) , with the help
of the following home page:
http://www.fortunecity.com/skyscraper/solo/216/index.html
Cheng-Chang Wu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
better?
I've heard of PHP or using perl for CGI. How about
database? Can anyone with experience give me some
suggestions? Thanks.
-cheng
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
hi,
Is there a way to use SUN's workstation monitor?
We have some spare monitor here (machine is broken)
but I found that the monitor cable is different
from those in PC. Anyone has done this before?
Do I need a extra card or something else to use
it? Thanks for your suggestions.
--
To UNSUBS
Hello all,
I have just installed the debian fetchmail package and now I cannot
download mail from my server. Before I install debian fetchmail package, I
use popclient and it works perfectly. Now I change to fetchmail, it gives
me the error:
reading message 1 (2561 bytes) .fetchmail: SMTP connect
Hello all,
I try to find the popclient package but I cannot find it. It seems that
the popclient package has become obsolete. Can someone tell me which
package has the popclient program.
Thanks in advance!
Anthony
"We have not succeeded in answering all our problems. The answers we have
found o
I installed newest version of gimp in hamm, but it
can neither view .gif file nor save in this format.
Is there something wrong in my configuration?
-cheng
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Hi,
My other editors can handle arrow keys well, but ae can it only under
text mode, not under X. it prints ^[[C when I press left arrow key?
--
Cheng-Chang Wu
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I am trying to configure a pnp sound card.
But it seems that /etc/init.d/isapnp did not
start first, so kernel could not initialize
sound correctly. Below is from /var/adm/messages
kernel: Sound initialization started
kernel: sb: Interrupt test on IRQ7 failed - device disabled
kernel: at 0x330 i
Does anyone have experience in configuring yamaha
OPL3-SA3 card? It is 3D sound, 16bit full duplex
pnp card. After compiling a new kernel and reboot,
I did not see any message about sound module in
startup. Use 'cat /dev/sndstat', it shows like this
cat: /dev/sndstat: Operation not supported by d
On Sat, Dec 13, 1997 at 10:54:06AM +0100, @lex Maneu wrote:
>
> -I want to put a picture as the background of X-Windows, or simply
> change the background color. Where is it specified? Which files must
> I edit?
>
I can only answer this question. :) You need to edit .xsession or .xinitrc
file, use
Is there a way to increase colormap in X server? Everytime
I start netscape, all other program (asclock, gimp, etc) can
no longer use color. I don't know whether this is
due to constraints in my setting in X or the hardware.
How can I find this out and fix this problem? Thanks a lot!!
--
TO UN
The newer version of gv seems not work in my systerm.
--
gv: error in loading shared libraries
libXaw3d.so.6: cannot open shared object file: No such file or directory
-
Is there any way to fix it? Thanx.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscri
" /etc/issue will be output before each login prompt
ISSUE_FILE_ENAB no
configuration error - unknown item 'ISSUE_FILE_ENAB' (notify administrator)
Well, maybe too long and too many. Can anyone help me out? Thanx a lot!!
-cheng
--
TO UNSUBSCRIBE FROM THIS
After reading /usr/doc/povray/copyright, it seems to me that it is non-free,
even though AFAIK it is part of the main distribution, and I suppose that is
a concern for any Debian distributors. Can someone more knowledgeable look
into this?
--
Steve Cheng [EMAIL PROTECTED] <h
Hello all,
I would like to execute a few commands when I exit X windows session. Can
someone tell me which script file will be excuted when one finishes the X
windows session so that I can write my commands on that.
Thanks
Anthony
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "uns
Hello all,
I am helping my friend installing debian 1.3.1 from a cdrom. My friend has
a Mystique 220. Obviously, the xwindow packages in the cdrom does not
work for this card. I want to ask which new packages should I get from one
of the ftp sites and what is the correct procedure to install it.
P
disk 22, 64 May 28 02:50 hdd
Cheng-Chang Wu
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
> On Sun, 17 Aug 1997 13:59:30 +0800 "A.D.Y. Cheng" ([EMAIL PROTECTED])
> wrote:
>
> > Does anyone know what program in linux can transform the Microsoft riff,
> > wave audio data into .voc file?
>
> Sox. In debian package sox.
It does not work. When I di
Hello all,
Does anyone know what program in linux can transform the Microsoft riff,
wave audio data into .voc file?
Thanks
Anthony
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Hello,
I am using XEmacs recently. I have found 2 problems, I think
they are bugs.
The problems:
1. GNUS try to find active file under /usr/lib/news, I think debian
installs active file under /var/lib/news.
2. When I execute CVS with menu "Tool/VC/Update CVS Directory", XEmacs try
to find /
When I invoke GNUS, it says:
nnspoll() open error:
The active file doesn't exist:/usr/lib/news/active.
But my Debian box hat active file under /var/lib/news, not /usr/lib/news.
When I invoke "CVS Update Directory" with the Menu Tools/VC, XEmacs says it
can't find file /usr/local/bin/cvs. M
Hello,
I need to set up a BBS for my company. Does anyone know, what kind of
software do I need? Thanks a lot.
Cheng-Chang Wu
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
I can't not find xmkmf and imake in Debian 1.3. They were
in xbase, but now they are not there. Which package contents
these two programs?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Hello all,
I have a strange problem. After installing a new Debian system on my
friend's system, there is something unusal happenes to his computer. When
he types emacs in xterm or one of the six virtual consoles, it just stops
and nothing happenes. He cannot kill this job by typing Ctrl-C. But wh
Hello all,
I am trying to install a Debian 1.3 system on my friend's computer.
However, I encountered a serious problem which I do not know how to solve.
There is no problem of installation. I setup ppp correctly and able to
dail in to ISP. But when I try to upgrade the system using ftp of dselec
Hello all,
I am running PPP connecting to my ISP. However, after connecting, if I
leave the connection idle for about half an hour, the modem will hang up
itself which I do not really want. Can somebody point out to me how to
turn off this feature?
Thanks for help in advance !
Anthony
--
TO UN
I have some problem to setup xdm. By default, chooser
should startup first, display a list of hosts, then
runs xlogin. But now it directly goes into login
display. I have no problem when running chooser
when login and run /usr/lib/X11/xdm/chooser.
The file /etc/X11/xdm/Xaccess looks like:
Hello all,
I know my question is not quite appropriate in this mailing list. But
hopefully, someone can answer my question.
I am looking for a maths C library which has the function which can find
the inverse cumulative standard normal disturbtion. It seems that the
standard maths.h does not hav
1 - 100 of 111 matches
Mail list logo