Dear list,
what do I have to tell postfix in order to correct the following error:
-
This is the Postfix program at host debian.
I'm sorry to have to inform you that the message returned
below could not be delivered to one or more destinations.
For further assistance, please send
Hello to everyone.
After deciding to go from SuSE 8.0 to Debian 3.0 on my home server I have the
following problem:
I used to use wvdial to dialup to the Internet with great success. I also use wvdial
on my laptop. But, on the home server wvdial (using the wvdial.conf from SuSE) does
not
Although I am using Debian for a long time now, I have some problems on a new
installation:
1. mutt opens the mail folders of a user in read-only mode. How can I change it?
2. How can I tell exim to relay (accept email) the 10.100.0.0/255.255.0.0 network?
TIA,
Mihalis.
Hello and thanks for answering.
By doing the following, according to your code for the broadcast
addresses, I did what I wanted.
(I also had to declare srv_addr as struct in_addr)
if (ioctl(sd,SIOCGIFFLAGS,devptr) 0)
{
fprintf(stderr,Error: Unable to get device interface
Hello to everyone.
I am looking for C code in order to find the IP address of each ethX
interface in a Linux machine.
many thanks in advance,
Mihalis.
-
:wq
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello to everyone.
I have downloaded the source file of an application (apt-get source
appl). Along with the .tar.gz file, I got and diff.gz file which I don't
know how to apply it to the .tar.gz file (after the extract of cource).
Can you please help me?
TIA,
Mihalis.
-
:wq
--
To
On Fri, 7 Mar 2003, Rob Weir wrote:
Date: Fri, 7 Mar 2003 19:22:18 +1100
From: Rob Weir [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: eth0: card reports no resources
Resent-Date: Fri, 7 Mar 2003 03:58:52 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
On Tue, Mar 04, 2003 at 04:29:26PM
On Thu, 6 Mar 2003, Mike M wrote:
Date: Thu, 6 Mar 2003 20:48:18 -0500
From: Mike M [EMAIL PROTECTED]
To: [EMAIL PROTECTED], Gabriel Granger [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: resetting a network card
On Thursday 06 March 2003 10:13, [EMAIL PROTECTED] wrote:
Thanks for
On Thu, 6 Mar 2003, Josh McKinney wrote:
Date: Thu, 6 Mar 2003 21:06:31 -0500
From: Josh McKinney [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: resetting a network card
Resent-Date: Thu, 6 Mar 2003 20:25:19 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
On approximately Thu, Mar 06,
I am curious about the type of card your are working with - RTL8139 by
any chance? The problem you describe has a certain familiarity to it. --
Mike M.
One of the network cards that I have seen the problem is a RTL8139. But I
have also seen the same problem with 2 Intel
Hello list!
I would like to know if it is possible to reset a network card without
rebooting the computer.
What I really like to do is to clean the statistics of the network card
(those that are shown with ifconfig -a or with ifconfig -s).
Many thanks in advance,
Mihalis.
-
:wq
--
To
Thanks for answering.
I am afraid that this is not what I want:
The problem is that the network card, after lots of data (about 4GB) -
either in receive or in transmit, stops responding correctly.
So I want to somehow reset in order to see if this will solve my
problem.
Any other ideas please?
Hello to everyone.
I have the following problem:
My Intel Pro100 PCI network card generates the message:
eth0: card reports no resources
Kernel version 2.4.18
What can I do to correct this problem?
What problems can this cause?
TIA,
Mihalis.
-
:wq
--
To UNSUBSCRIBE, email to [EMAIL
Hello again.
I am facing the following problem:
paegasus:/usr/local/polydev/bin # ifconfig
0: error fetching interface information: Device not found
paegasus:/usr/local/polydev/bin #
As far as I can understand, the system looses the network card.
After 5 mins, the system finds the network card
On Thu, 13 Feb 2003 [EMAIL PROTECTED] wrote:
Date: Thu, 13 Feb 2003 17:52:14 +0200 (EET)
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: k3b
I heard that k3b is a great CD-copy software.
I cannot setup it succesfully though.
mtsouk@debian:~/code/tex/ekefe$ less /var/log/dmesg
Hello.
I want to install Adobe Acrobat Reader. Is there any deb file for it?
I have Debian Woody.
Mihalis.
-
:wq
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello to everyone.
I am going to monitor a squid server with MRTG and/or RRDTool.
I know that I have to setup SNMP first.
If anyone of you have done this before, can you please tell me which snmp
server should I use? Can you also send me the config file of the snmp
server?
many thanks in
I heard that k3b is a great CD-copy software.
I cannot setup it succesfully though.
mtsouk@debian:~/code/tex/ekefe$ less /var/log/dmesg | grep -i SCSI
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
Adaptec 2940 Ultra SCSI adapter
On Thu, 30 Jan 2003, Kirk Strauser wrote:
Date: Thu, 30 Jan 2003 14:51:11 -0600
From: Kirk Strauser [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: if you could have just one dead tree book
Resent-Date: Thu, 30 Jan 2003 15:05:20 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
At
On Thu, 30 Jan 2003, Jason Pepas wrote:
Date: Thu, 30 Jan 2003 15:58:50 -0600
From: Jason Pepas [EMAIL PROTECTED]
To: will trillich [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: Backup Consensus?
Resent-Date: Thu, 30 Jan 2003 16:11:41 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
a
After doing what you have kindly said, I got the following:
debian:~# apt-get upgrade -s
Reading Package Lists... Done
Building Dependency Tree... Done
You might want to run `apt-get -f install' to correct these.
Sorry, but the following packages have unmet dependencies:
arts: Depends: libarts1
Silly me!
After deleting the packages that were causing the errors (like kioslave)
its seams to work. I have not run KDE 3.1 yet but the apt-get -f install
completed without errors :-)
Thanks again for the nice instructions on installing KDE 3.1.
have a nice month,
Mihalis.
On Sat, 1 Feb 2003
On Wed, 18 Dec 2002, Martin F Krafft wrote:
Date: Wed, 18 Dec 2002 16:42:04 +0100
From: Martin F Krafft [EMAIL PROTECTED]
To: debian users [EMAIL PROTECTED]
Subject: OT: duplex entry in printcap
Resent-Date: Wed, 18 Dec 2002 09:42:51 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
Hi there,
On Sat, 7 Dec 2002, Marcin Fusinski wrote:
Date: Sat, 7 Dec 2002 18:54:14 +0100
From: Marcin Fusinski [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: C-Media CMI 8738 soundcard
Resent-Date: Sat, 7 Dec 2002 11:54:33 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
Greetings!
On Sat, 7
I had a PII 350MHz with both CD *and* CDR SCSI and 192MB of RAM and I
should say that the SCSI controller does the difference. It worked very
well without any problems. I could run KDE, run Netscape sometimes etc
while I was copying a cd.
I think it should work well for normal cd copying.
Hi.
My main problem is that only KDE3 supports Greek in a normal way (that is
without modifications in config files). That is that reason that I am so
interested in KDE3.
How much time does usually pass before testing becomes stable?
have a nice day,
Mihalis.
On Tue, 12 Nov 2002, David Z Maze
, Shyamal Prasad wrote:
Date: 12 Nov 2002 18:42:35 -0600
From: Shyamal Prasad [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: woody to testing
Resent-Date: Tue, 12 Nov 2002 18:42:57 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
mtsouk == mtsouk [EMAIL PROTECTED] writes:
mtsouk I am
On Tue, 5 Nov 2002, Matthew Daubenspeck wrote:
Date: Tue, 5 Nov 2002 21:17:00 -0500
From: Matthew Daubenspeck [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: woody to testing
Resent-Date: Tue, 5 Nov 2002 20:30:27 -0600 (CST)
Resent-From: [EMAIL PROTECTED]
On Wed, Nov 06, 2002 at
Dear all,
I have the following problem:
debian:~# apt-get install kdevelop
Reading Package Lists... Done
Building Dependency Tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some
29 matches
Mail list logo