On 20/08/2023 18:31, Longhao.Chen wrote:
Only one file was erroneous, but now it's not just the erroneous file that has
disappeared, over eight thousand other files have disappeared as well. The
disappeared files seem to be those that were recently modified or newly created.
I create a
Only one file was erroneous, but now it's not just the erroneous file that has
disappeared, over eight thousand other files have disappeared as well. The
disappeared files seem to be those that were recently modified or newly created.
I create a snapshot every day, and each snapshot is kept for
Ok. You said file with error has disappeared from the system. Is that
still the case? If there anything you need to "recover"? If file with
error is already gone, then you should have no more errors while reading
the drive to backup it.
On 20/08/2023 13:24, Longhao.Chen wrote:
Thanks for your
>Why not btrfs check?
'btrfs check' also reported a checksum error.
>As already suggested, you might do better looking elsewhere for help.
>Perhaps the linux-btrfs mailing list?
Thank you for your suggestion, I am preparing to seek help from linux-btrfs
mailing list.
On August 20, 2023
"Longhao.Chen" wrote:
> Hello everyone, I use Btrfs as the file system on my laptop.
> Yesterday, I was preparing to backup a snapshot to an external hard
> drive using btrfs send, and the following error occurred:
>
> ERROR: send ioctl failed with -5: Input/Output error
I use btrfs but don't
Thanks for your reply.
The disk is a 1TB Samsung SSD with less than 4TiB written, the SMART is
completely normal with no errors. I suspect that this error may have been
caused by random bit flipping in the memory (DDR4 non-ECC memory).
I just want to fix the checksum error (because the file
On 20/08/2023 12:11, Longhao.Chen wrote:
Thanks for your reply. I previously read in the btrfs documentation that "when
repairing the file system, it is advisable to choose a newer kernel", so I used
Ubuntu's livecd for the repair.
First of all, did you found the cause of this unrepairable
I'm sorry, because a long time after I sent the first email, I didn't see it in
the web archive. I suspected there was a problem during the sending process, so
I sent a second one. I apologize for my mistake.
>Hello everyone, I use Btrfs as the file system on my laptop. Yesterday, I was
Thanks for your reply. I previously read in the btrfs documentation that "when
repairing the file system, it is advisable to choose a newer kernel", so I used
Ubuntu's livecd for the repair.
>On 20 Aug 2023 17:42 +0800, from longhao.c...@outlook.com (Longhao.Chen):
>> LiveCD information:
>>
>>
On Sun, 20 Aug 2023 18:28:56 +0800
"Longhao.Chen" wrote:
Hello Longhao.Chen,
>Hello everyone,
Please be patient. Waiting less that an hour before reposting a question
gains you little.
This is a users mailing list, not a paid for support forum. Anyone here
is volunteering their time. Users
On 20 Aug 2023 17:42 +0800, from longhao.c...@outlook.com (Longhao.Chen):
> LiveCD information:
>
> Linux ubuntu 6.2.0-26-generic #26~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC
> Thu Jul 13 16:27:29 UTC 2 x86_64 x86_64 x86_64 GNU/Linux
This mailing list is for users of Debian, where current stable ships
Hello everyone, I use Btrfs as the file system on my laptop. Yesterday, I was
preparing to backup a snapshot to an external hard drive using btrfs send, and
the following error occurred:
ERROR: send ioctl failed with -5: Input/Output error
I used btrfs scrub to scan the disk, and the result
Hello everyone, I use Btrfs as the file system on my laptop. Yesterday, I was
preparing to backup a snapshot to an external hard drive using btrfs send, and
the following error occurred:
ERROR: send ioctl failed with -5: Input/Output error
I used btrfs scrub to scan the disk, and the result
On 22/05/22 at 03:30, Marcelo Laia wrote:
> On 21/05/22 at 04:09, Marcelo Laia wrote:
> > Nowadays, email recipients had give me feedback that attached files that
> > I sent was corrupted. I use Mutt + msmtp + offlineimap and OAuth GMail
> > app implementation.
>
> After more tests, I found that
On 21/05/22 at 04:09, Marcelo Laia wrote:
> Nowadays, email recipients had give me feedback that attached files that
> I sent was corrupted. I use Mutt + msmtp + offlineimap and OAuth GMail
> app implementation.
After more tests, I found that if I use the mutt native smtp, attach is
properly
On Sun 22 May 2022 at 09:15:22 (-0300), Marcelo Laia wrote:
> On 21/05/22 at 04:09, Marcelo Laia wrote:
> > Nowadays, email recipients had give me feedback that attached files that
> > I sent was corrupted. I use Mutt + msmtp + offlineimap and OAuth GMail
> > app implementation.
> >
>
> After a
On 21/05/22 at 04:09, Marcelo Laia wrote:
> Nowadays, email recipients had give me feedback that attached files that
> I sent was corrupted. I use Mutt + msmtp + offlineimap and OAuth GMail
> app implementation.
>
After a lot of tests, I found:
1. Files with image/figure was damaged
2. If
Nowadays, email recipients had give me feedback that attached files that
I sent was corrupted. I use Mutt + msmtp + offlineimap and OAuth GMail
app implementation.
Here is headers I got from e...@xxx..xx:
From: Marcelo
To: echo
Date: Fri, 20 May 2022 12:35:49 -0300
Subject: Test 7
I'm trying to install lenny (5.02, i386), and keep getting the following
error:
Warning: file:///cdrom/pool/main/g/glibc/libc6_2.7-18_i386.deb was corrupt
If I tell it to continue anyway, one library after another gets the same
error.
I checked the MD5 on the CDROM, and it was good. I
On 2009-08-30 18:03, David Steinhauer wrote:
I'm trying to install lenny (5.02, i386), and keep getting the following
error:
Warning: file:///cdrom/pool/main/g/glibc/libc6_2.7-18_i386.deb was corrupt
If I tell it to continue anyway, one library after another gets the same
error.
I checked
So far so good with the Samsung F1 drives. Though admittedly I haven't
been transferring as large of files with it yet.
Steve
On Sat, Jul 11, 2009 at 10:50:24AM -0600, lee wrote:
On Thu, Jul 09, 2009 at 06:05:16PM -0500, Steve wrote:
I'm hoping the problem will be solved with two new
On Thu, Jul 09, 2009 at 06:05:16PM -0500, Steve wrote:
I'm hoping the problem will be solved with two new hard drives arriving
tomorrow. This machine isn't in production yet so I'll swap out the
hard drives and try again.
How did it turn out?
--
To UNSUBSCRIBE, email to
On Wed, Jul 08, 2009 at 09:38:06PM -0600, lee wrote:
On Wed, Jul 08, 2009 at 08:28:16AM -0500, Steve wrote:
When transferring large files (100 to 1500mb) to the mount point
using scp the transfer almost always results in a corrupt file, by
which I mean that the md5sum of the file doesn't
Hello,
I've configured a software raid 1 on two sata drives, using a single
partition on each drive to create the array. When transferring large
files (100 to 1500mb) to the mount point using scp the transfer almost
always results in a corrupt file, by which I mean that the md5sum of the
Hello Steve,
before years i had similar problem. Check your hard disks on the target
machine. May be some of them are broken.
Best regards
Georgi
Steve wrote:
Hello,
I've configured a software raid 1 on two sata drives, using a single
partition on each drive to create the array. When
On Wed, Jul 08, 2009 at 08:28:16AM -0500, Steve wrote:
When transferring large files (100 to 1500mb) to the mount point
using scp the transfer almost always results in a corrupt file, by
which I mean that the md5sum of the file doesn't match the source.
Is it possible that scp is the problem?
Am Wed, 8 Jul 2009 21:38:06 -0600
schrieb lee l...@yun.yagibdah.de:
If you have a Realtek network card/chip involved somewhere, first get
a decent network card to replace it with (replace all of them if there
are several). If you don't want to replace them, try to copy your
files over NFS and
I recently installed an Adaptec 2940U2 controller and two disks in myDebian Sarge system. Prior to this installation, the system had beena rock-solid IDE only system. The card and drives are correctlydetected and identified by the kernel at boot. Unfortunately, I am
experiencing consistent
I am experiencing file corruption after downloading a
file from codeweavers. The MD5 sum does not match
whatever browser I use to download on the machine in
question. However, it downloads fine on other
machines and will then transfer across to the machine
in question.
I have just moved
On Wed, 17 Oct 2001 23:12:29 Russell Coker wrote:
[...]
BTS. It's either a kernel issue or a hardware issue.
It turns out to be a hardware issue. One corrupt bit in 256 MB.
Thank you for your response, Steven.
--
Steven Mooij
Kavezet Automatisering
Firstly I think this is more suitable for debian-user, so I'm BCCing -devel
and CCing -user. Please CC me on any follow-ups.
On Wed, 17 Oct 2001 15:27, Steven Mooij wrote:
Hello, I'm not a debian developer (yet), but I hope I am allowed to post a
message here. It is about a potential bug, but
Hello!
I use samba from current potato. I have Win98 client. I find that if
I try to copy (by Windows) a large file from client onto samba network drive,
then this file corrupts almost for sure.
Can anybody help me?
Does anybody have this problem?
Thanks!
--
Serge Gavrilov
Serge Gavrilov wrote:
Hello!
I use samba from current potato. I have Win98 client. I find that if
I try to copy (by Windows) a large file from client onto samba network drive,
then this file corrupts almost for sure.
Can anybody help me?
Does anybody have this problem?
Yeah but
OK. Does anyone know the answer to this:
When I download debian package files onto my PowerMac and try to
transfer them via PC-formatted floppy to my Linux box, the files are
showing up under linux all starting with ! (i.e.
kernel-package_3.28.deb becomes !kernal-package_3.28) and I can't
seem
Dave Neuer [EMAIL PROTECTED] writes:
When I download debian package files onto my PowerMac and try to
transfer them via PC-formatted floppy to my Linux box, the files are
showing up under linux all starting with ! (i.e.
kernel-package_3.28.deb becomes !kernal-package_3.28) and I
can't seem
Dave Neuer [EMAIL PROTECTED] writes:
When I download debian package files onto my PowerMac and try to
transfer them via PC-formatted floppy to my Linux box, the files are
showing up under linux all starting with ! (i.e.
kernel-package_3.28.deb becomes !kernal-package_3.28) and I can't
seem
Dave Neuer wrote:
...
BTW, I can't get the Linux box connected via Ethernet (no drivers) or
modem (can't seem to find modem, and can't transfer any communications
programs like minicom to the Linux box to test for the modem).
By default only 2 serial ports are configured. Edit
37 matches
Mail list logo
