On Wed, Mar 28, 2007 at 05:52:23AM +0100, Ian Broadbent wrote:
You could of snipped the unnecessary bits.
Chris.
errr.. that might be good advice Chris BUT, it kinda
ASSumes that I knew what the 'unnecessary bits' were ... doesn't it?
If I'd known that ... then I would have
On Sun, Mar 25, 2007 at 18:44:30 +0100, ieb wrote:
Hello folks,
[..]
I have rebuilt the 2.6.18-4-amd64 with the NVIDIA components, have
installed the nvidia-glx module, but whenever I let the
etc/X11/xorg.conf build with the nvidia configuration tool it builds
the 'conf' with a declaration for the
Question please... should the driver be 'nvidia' or 'nv', (if
'nvidia'
- any suggestions as to what I am missing?) ... if it's should be
'nv' in any event .. then can someone help me find the settings for
this to get the colours to be accurately displayed?
It depends. IIRC 'nv' is the
Ian Broadbent wrote:
Question please... should the driver be 'nvidia' or 'nv', (if
'nvidia'
- any suggestions as to what I am missing?) ... if it's should be
'nv' in any event .. then can someone help me find the settings for
this to get the colours to be accurately displayed?
It
On Tue, 2007-03-27 at 13:05 +0100, Wackojacko wrote:
I have read dozens of trails about this 'Signal 11' ... but so far not
one of them has thrown any light on it. (The error codes listed for the
xserver are about as obscure as they could be ... at least the version I
downloaded
Try commenting the PCI bus line out of the xorg.conf and see if the
driver can auto detect the card. Otherwise, look at lspci -v for
details of the bus.
Oh and BTW. I had already tried that (and have just repeated it
'just in case') ... no effect whatsoever. same error-11 , same
Ian Broadbent wrote:
Try commenting the PCI bus line out of the xorg.conf and see if the
driver can auto detect the card. Otherwise, look at lspci -v for
details of the bus.
Oh and BTW. I had already tried that (and have just repeated it
'just in case') ... no effect whatsoever. same
On 27 Mar 2007, Ian Broadbent wrote:
Question please... should the driver be 'nvidia' or 'nv', (if
'nvidia'
- any suggestions as to what I am missing?) ... if it's should be
'nv' in any event .. then can someone help me find the settings for
this to get the colours to be accurately
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Magnus Therning wrote:
On Sun, Mar 25, 2007 at 18:44:30 +0100, ieb wrote:
Hello folks,
[..]
I have rebuilt the 2.6.18-4-amd64 with the NVIDIA components, have
installed the nvidia-glx module, but whenever I let the
etc/X11/xorg.conf build with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Anthony Campbell wrote:
On 27 Mar 2007, Ian Broadbent wrote:
Question please... should the driver be 'nvidia' or 'nv', (if
'nvidia'
- any suggestions as to what I am missing?) ... if it's should be
'nv' in any event .. then can someone help me
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joe Hart wrote:
Anthony Campbell wrote:
On 27 Mar 2007, Ian Broadbent wrote:
Question please... should the driver be 'nvidia' or 'nv', (if
'nvidia'
- any suggestions as to what I am missing?) ... if it's should be
'nv' in any event .. then can
Ian, It sounds to me like your xorg.conf is still messed up. Can you
post that too? Just the relevant Device and Screen sections should
be enough. But you can put the whole thing here too. Then we should
get a pretty good idea what is going on.
Will do... but just now I have to
On 27 Mar 2007, Joe Hart wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Anthony Campbell wrote:
On 27 Mar 2007, Ian Broadbent wrote:
Question please... should the driver be 'nvidia' or 'nv', (if
'nvidia'
- any suggestions as to what I am missing?) ... if it's should be
'nv'
Ian Broadbent wrote:
On Tue, 2007-03-27 at 13:39 +0100, Wackojacko wrote:
Ian Broadbent wrote:
Try commenting the PCI bus line out of the xorg.conf and see if the
driver can auto detect the card. Otherwise, look at lspci -v for
details of the bus.
Oh and BTW. I had already tried that
snip xorg nvidia log
(II) Initializing extension GLX
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x6d) [0x4802ed]
1: /lib/libc.so.6 [0x2ac51f460110]
2: /lib/libc.so.6(__ctype_tolower_loc+0x25) [0x2ac51f45a2c5]
3: /usr/bin/X(xf86nameCompare+0xfe) [0x4a4cde]
4:
On Tue, Mar 27, 2007 at 11:23:14AM +0100, Ian Broadbent wrote:
OK, now I am really into DEEP water I have run the lspci
command ... but I'm not too sure what it is telling me on a quick
scan down this lot (below) I only see the entry for VGA graphics
controller. Would you not
You could of snipped the unnecessary bits.
Chris.
errr.. that might be good advice Chris BUT, it kinda
ASSumes that I knew what the 'unnecessary bits' were ... doesn't it?
If I'd known that ... then I would have been able to spot the error
instantly (as others did when they saw
Hello folks,
I'm still puzzling with my build of Etch on this new machine I've
solved the GRUB error 16 and error 18 problems, by disabling the SMART
options in the BIOS and stopping the appropriate services for
smartmon. Everything on that front now appears to be stable ...and I
don't
18 matches
Mail list logo
