Re: printer problem

Dear Tomas, Thanks a lot for your reply. That did get me one step further, but the printer is still giving an error. I was able to login though through the website. adresine sahip kullanıcı 31 Eki 2024 Per, 08:35 tarihinde şunu yazdı: > On Wed, Oct 30, 2024 at 11:19:20PM +0300, Semih Ozlem wrot

Re: printer problem

On Wed, Oct 30, 2024 at 11:19:20PM +0300, Semih Ozlem wrote: > Thank you for your reply, Eduardo. However it appears that there is another > problem. The printer requires entry of a password. An the menu for that is > available in windows, but I have no idea where in linux I would get > properties

Re: printer problem

> You could try asking Kyocera for support (if they offer such an option), or > perhaps someone from the IT department of your university (some other linux > user might have had the same problem). Unfortunately your options are > not great. Maybe it's worth looking into how it works for people pri

Re: printer problem

On 30/10/2024 17:19, Semih Ozlem wrote: Thank you for your reply, Eduardo. However it appears that there is another problem. The printer requires entry of a password. An the menu for that is available in windows, but I have no idea where in linux I would get properties about printer and printin

Re: printer problem

Thank you for your reply, Eduardo. However it appears that there is another problem. The printer requires entry of a password. An the menu for that is available in windows, but I have no idea where in linux I would get properties about printer and printing permissions. This is at a university, and

Re: printer problem

Em 2024-10-30 09:25, Semih Ozlem escreveu: I am using debian 12. I am on a network with printer Kyocera ECOSYS MA4500ix. I installed the printer's driver from Kyocera's website. But I am unable to print. On Printer Properties Under Printer State I am getting the message: Processing - Illegal acco

printer problem

Hi everyone, I am using debian 12. I am on a network with printer Kyocera ECOSYS MA4500ix. I installed the printer's driver from Kyocera's website. But I am unable to print. On Printer Properties Under Printer State I am getting the message: Processing - Illegal account. Job is canceled. Other peo

Re: Printer problem

On Sat 14 Dec 2013 at 20:37:09 +0100, Siard wrote: > Gábor Hársfalvi wrote off-list: If his reply to my post was off-list it will never be seen by me (I only receive and respond to on-list mail) or (obviously) anyone else. If Gábor is looking for a response he should check whether any mail was se

Re: Printer problem

Gábor Hársfalvi wrote off-list: > Thanks. > > So we could tell the driver to use only the black ink for black > texts/images? No. A document containing composite black text is simply not suitable for printing. You should try to get a better document. Of course, you can tell the driver to print

Re: Printer problem

Gábor Hársfalvi wrote: > We have got a HP Inkjet f2180 printer and we need use pure black ink > instead of composite black every time. > > How to do this? The document to be printed should contain pure black, that is, CMYK values C=0% M=0% Y=0% K=100%. Printing offices also require this if you ha

Re: Printer problem

On Sat 14 Dec 2013 at 11:22:08 +0100, Gábor Hársfalvi wrote: > We have got a HP Inkjet f2180 printer and we need use pure black ink > instead of composite black every time. > > How to do this? What driver package and PPD are you using? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.deb

Printer problem

Hi, We have got a HP Inkjet f2180 printer and we need use pure black ink instead of composite black every time. How to do this?

Re: Suggestion for buying/repairing print (was: "Chicken-egg" printer problem)

On Wednesday 20 October 2010 12:13:15 Rodolfo Medina wrote: > Rodolfo Medina writes: > >> However, I have now another problem: after cleaning the heads, the print > >> quality remains bad. They told me it may depend on the heads dried or > >> maybe broken. In any case, they told that the printer

Re: Suggestion for buying/repairing print (was: "Chicken-egg" printer problem)

Rodolfo Medina writes: >> However, I have now another problem: after cleaning the heads, the print >> quality remains bad. They told me it may depend on the heads dried or maybe >> broken. In any case, they told that the printer needs being taken to an >> assistence centre. >> >> Any suggestion

Re: [solved] Re: "Chicken-egg" printer problem

Since you are about to scrap the printer, you could try some harder methods. Searching for "epson print head cleaning" you can find advices, how to try to clean a dried print head without disassembling the printer, e.g., http://www.2manuals.com/head_clean.php Instead of a syringe I used a Q-tip (co

Re: [solved] Re: "Chicken-egg" printer problem

On 10/19/2010 07:31 AM, Rodolfo Medina wrote: Camaleón writes: So, in brief: 1/ There is still a small quantity of ink in cartridges 2/ But the printer does not print because its cleaning heads are obturated or dirty. 3/ You cannot perform a maintenance task because there is not enough in

Re: [solved] Re: "Chicken-egg" printer problem

On 10/19/2010 09:31 AM, Rodolfo Medina wrote: However, I have now another problem: after cleaning the heads, the print quality remains bad. They told me it may depend on the heads dried or maybe broken. In any case, they told that the printer needs being taken to an assistence centre. Any sug

Re: [solved] Re: "Chicken-egg" printer problem

On 10/19/2010 11:40 AM, Klistvud wrote: The "printer and cartridges" business model has been a thorn in the side of conscientious consumers for years. You can say that again! Although I might characterize the position of the pain as being more toward the posterior than the side. ;-) -- T

Re: [solved] Re: "Chicken-egg" printer problem

Dne, 19. 10. 2010 15:05:21 je Gilbert Sullivan napisal(a): In addition to considering the compatibility of a printer with your OS you might want to consider its design compatibility with your printing needs. The issue you ran into with your Epson not being able to clear its print heads e

Re: [solved] Re: "Chicken-egg" printer problem

On Tue, 19 Oct 2010 13:59:36 +0200, Rodolfo Medina wrote: > Rodolfo Medina writes: > >> However, I have now another problem: after cleaning the heads, the >> print quality remains bad. They told me it may depend on the heads >> dried or maybe broken. In any case, they told that the printer need

Re: [solved] Re: "Chicken-egg" printer problem

On 10/19/2010 07:59 AM, Rodolfo Medina wrote: Rodolfo Medina writes: However, I have now another problem: after cleaning the heads, the print quality remains bad. They told me it may depend on the heads dried or maybe broken. In any case, they told that the printer needs being taken to an as

Re: [solved] Re: "Chicken-egg" printer problem

On Tue October 19 2010, Rodolfo Medina wrote: > It seems that I need a new printer: where can I find a list of all the > printers that are known to be compatible with Debian Lenny? http://www.linuxprinting.org/ -- Paul Cartwright Registered Linux user # 367800 Registered Ubuntu User #12459 --

Re: [solved] Re: "Chicken-egg" printer problem

Rodolfo Medina writes: > However, I have now another problem: after cleaning the heads, the print > quality remains bad. They told me it may depend on the heads dried or maybe > broken. In any case, they told that the printer needs being taken to an > assistence centre. > > Any suggestion about

[solved] Re: "Chicken-egg" printer problem

Camaleón writes: > So, in brief: > > 1/ There is still a small quantity of ink in cartridges > 2/ But the printer does not print because its cleaning heads are > obturated or dirty. > 3/ You cannot perform a maintenance task because there is not enough ink > 4/ The printer does not respond to a

Re: "Chicken-egg" printer problem

On Tue, 19 Oct 2010 11:23:24 +0200, Rodolfo Medina wrote: (...) >> Then try with these steps: >> >> http://support.epson-europe.com/onlineguides/en/sc20/ref_g/ink_1.htm > > > Those steps require the cartridges to be completely empty, otherwise the > heads won't reach the replacement position: >

Re: "Chicken-egg" printer problem

Rodolfo Medina writes: > I'm facing the following odd problem: > > when I do: `escputil -c' to clean the printer's heads, the output looks good: > > $ escputil -c -r /dev/usb/lp0 > Escputil version 5.0.2, Copyright (C) 2000-2006 Robert Krawitz > Escputil comes with ABSOLUTELY NO WARRANTY; for det

Re: Odd printer problem

On Mon, 18 Oct 2010 21:33:05 +0200, Rodolfo Medina wrote: > Rodolfo Medina writes: > >>> I don't know how: until the ink is completely finished, the cartridges >>> won't reach the replacement position. :( > > > Camaleón writes: > >> If you have no way to force a replacement, just print 100 co

Re: Odd printer problem

On 10/18/2010 05:33 PM, Rodolfo Medina wrote: But it's just this the problem: as I said, the paper is left blank because the heads are dirty, both black and coloured print. Maybe the ink has dried, then there's not much you can do. Regardless of the cause, can't you just replace the cartidge

Re: Odd printer problem

Rodolfo Medina writes: > I'm facing the following odd problem: > > when I do: `escputil -c' to clean the printer's heads, the output looks good: > > $ escputil -c -r /dev/usb/lp0 > Escputil version 5.0.2, Copyright (C) 2000-2006 Robert Krawitz > Escputil comes with ABSOLUTELY NO WARRANTY; for d

Re: Odd printer problem

On Mon, 18 Oct 2010 18:36:24 +0200, Rodolfo Medina wrote: > Rodolfo Medina writes: >> What to do in this case? From cups mailing list I got no indications. > > > > Camaleón writes: > >> If your ink levels are so low that cleaning is not possible, replace >> the ink cartridges. I suppose you

Re: Odd printer problem

Rodolfo Medina writes: > I'm facing the following odd problem: > > when I do: `escputil -c' to clean the printer's heads, the output looks good: > > $ escputil -c -r /dev/usb/lp0 > Escputil version 5.0.2, Copyright (C) 2000-2006 Robert Krawitz > Escputil comes with ABSOLUTELY NO WARRANTY; for de

Re: Odd printer problem

On Monday 18 October 2010 13:39:50 Rodolfo Medina wrote: > Rodolfo Medina writes: > > I'm facing the following odd problem: [snip] > > when I do: `escputil -c' to clean the printer's heads, the output looks > > good: [snip] > > , but then nothing happens and the heads are not cleaned. [snip] > C

Re: Odd printer problem

Rodolfo Medina writes: > I'm facing the following odd problem: > > when I do: `escputil -c' to clean the printer's heads, the output looks good: > > $ escputil -c -r /dev/usb/lp0 > Escputil version 5.0.2, Copyright (C) 2000-2006 Robert Krawitz > Escputil comes with ABSOLUTELY NO WARRANTY; for det

Re: Odd printer problem

On Sun, 17 Oct 2010 11:34:07 +0200, Rodolfo Medina wrote: (...) > , but then nothing happens and the heads are not cleaned. I suspect > this happens because the ink is short and the system is waiting for it > to finish completely. But then I have the following problem: > > 1) until the ink is

Odd printer problem

I'm facing the following odd problem: when I do: `escputil -c' to clean the printer's heads, the output looks good: $ escputil -c -r /dev/usb/lp0 Escputil version 5.0.2, Copyright (C) 2000-2006 Robert Krawitz Escputil comes with ABSOLUTELY NO WARRANTY; for details type 'escputil -l' This is free

Re: panasonic printer problem

On 2009-07-25 12:57, Jude DaShiell wrote: This is getting interesting now and I have some good news. I hooked the printer up to a real dos box that never had any other operating system on it and used a file manager to print a file. This time, the file came out legible with no garbage. So, I'

re: panasonic printer problem

This is getting interesting now and I have some good news. I hooked the printer up to a real dos box that never had any other operating system on it and used a file manager to print a file. This time, the file came out legible with no garbage. So, I'm thinking printing with this kind of prin

Re: panasonic printer problem

On 2009-07-25 01:35, Jude DaShiell wrote: Was there a firmware update released for the KXP-1123 during its history? It could be the ppd file that's available for that printer needs that firmware update installed if such exists. Do those old printers even have the capability to flash their EEP

panasonic printer problem

Was there a firmware update released for the KXP-1123 during its history? It could be the ppd file that's available for that printer needs that firmware update installed if such exists. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble?

update: Can't config cups printer, problem gone

On Thu, 16 Oct 2008 04:14:35 +, T o n g wrote: > I can't config my cups printer in my newly installed lenny system. Somehow, the command /usr/lib/cups/backend/usb now returns my printer info. I turn off and on the printer before running the command, both when posting the OP, and now. T

printer problem (prints postscript source, not document)

My work has a combo copy-machine/fax/printer that works great with windows (and seems really fast), but I can't seem to get it working properly with debian/cups. The printer model is: "Canon iR C4580F" I managed to locate it on the net, and configured it with cups' webpage-configuration stuff, a

Re: usb/cups printer problem after etch upgrade

On Sat, May 12, 2007 at 08:18:10 -0700, Nick Jacobs wrote: > > > Florian Kulzer-3 wrote: > > > > As far as I understand udev, it should always use the lowest free lpX > > node for a new printer. > > > That's just the problem, it doesn't always. If it did that consistently, > nobody would have h

Re: usb/cups printer problem after etch upgrade

On Sat, May 12, 2007 at 08:18:10AM -0700, Nick Jacobs wrote: > > > Florian Kulzer-3 wrote: > > > > As far as I understand udev, it should always use the lowest free lpX > > node for a new printer. > > > That's just the problem, it doesn't always. If it did that consistently, > nobody would have

Re: usb/cups printer problem after etch upgrade

oks to me as though we have "upgraded" from something that was stable and worked (despite having some theoretical deficiencies) to something that is bug-ridden and unsuitable for general use (despite being theoretically wonderful). -- View this message in context: http://www.nabble.co

Re: usb/cups printer problem after etch upgrade

On Sat, May 05, 2007 at 07:34:30 -0700, Nick Jacobs wrote: > Graham Seaman wrote: > > > > After upgrading the server to etch (without any major problems) cups no > > longer sees the printer. Cups is running ok, and knows about the > > printer, but the web interface always displays the message: >

Re: usb/cups printer problem

I have exactly the same problem. I tried your suggestion and changed lp0 to lp2 ( in my case printer is attached to device number 2). It didn't help at all. Same "printer not connected" message. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contac

Re: usb/cups printer problem after etch upgrade

On Sat, May 05, 2007 at 07:34:30AM -0700, Nick Jacobs wrote: > > > Graham Seaman wrote: > > > > After upgrading the server to etch (without any major problems) cups no > > longer sees the printer. Cups is running ok, and knows about the > > printer, but the web interface always displays the me

Re: usb/cups printer problem after etch upgrade

at least you will be able to print. -- View this message in context: http://www.nabble.com/usb-cups-printer-problem-after-etch-upgrade-tf3651961.html#a10337018 Sent from the Debian User mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: usb/cups printer problem after etch upgrade

Hi Florian, Unfortunately, I ran out of time to work on this. So I have abandoned my print server and temporarily moved to using the printer as a local printer attached to the parallel port on my workstation. When it gets sufficiently annoying not to be able to print from other machines I wil

Re: usb/cups printer problem after etch upgrade

On Mon, Apr 30, 2007 at 00:56:24 +0100, graham wrote: > Florian Kulzer wrote: [...] >> Compare a directory listing before and after you plug in the printer if >> necessary. You can use something like >> find /dev/ | sort > before.txt >> < plug in the printer > >> find /dev/ | sort > after.txt >>

Re: usb/cups printer problem after etch upgrade

Florian Kulzer wrote: On Sun, Apr 29, 2007 at 20:32:59 +0100, graham wrote: Florian Kulzer wrote: find /dev/ -name usblp0 -exec ls -l {} \; ^ I'd still like to see the output of the above command just to be sure. Oops, sorry thought I'd checked this

Re: usb/cups printer problem after etch upgrade

On Sun, Apr 29, 2007 at 20:32:59 +0100, graham wrote: > Florian Kulzer wrote: > find /dev/ -name usblp0 -exec ls -l {} \; >>^ >> I'd still like to see the output of the above command just to be sure. > > Oops, sorry thought I'd checked this but I had

Re: usb/cups printer problem after etch upgrade

Florian Kulzer wrote: find /dev/ -name usblp0 -exec ls -l {} \; ^ I'd still like to see the output of the above command just to be sure. Oops, sorry thought I'd checked this but I hadn't. /dev/usblp0 does not exist. There is a /dev/usb/lp0, however.

Re: usb/cups printer problem after etch upgrade

On Sun, Apr 29, 2007 at 14:31:24 +0100, graham wrote: > Florian Kulzer wrote: >> On Sat, Apr 28, 2007 at 23:08:39 +0100, graham wrote: > >> Just to be sure: Run >> apt-get --purge remove hotplug >> (Plain "remove" leaves configuration files on the system; "--purge" gets >> rid of them.) > > OK, do

Re: usb/cups printer problem after etch upgrade

Florian Kulzer wrote: On Sat, Apr 28, 2007 at 23:08:39 +0100, graham wrote: Just to be sure: Run apt-get --purge remove hotplug (Plain "remove" leaves configuration files on the system; "--purge" gets rid of them.) OK, done. Following which I power cycled the printer and rebooted the s

Re: usb/cups printer problem after etch upgrade

On Sat, Apr 28, 2007 at 23:08:39 +0100, graham wrote: > Hi Florian, > > Thanks for the response! Answers inline below: basically everything seems > to be right - but cups still thinks the printer is paused... > > Florian Kulzer wrote: >> On Thu, Apr 26, 2007 at 15:18:52 +0100, graham wrote: >>> Hi

Re: usb/cups printer problem after etch upgrade

Hi Florian, Thanks for the response! Answers inline below: basically everything seems to be right - but cups still thinks the printer is paused... Florian Kulzer wrote: On Thu, Apr 26, 2007 at 15:18:52 +0100, graham wrote: Hi, I have a server running cups, with a wireless usb connector conn

Re: usb/cups printer problem after etch upgrade

On Thu, Apr 26, 2007 at 15:18:52 +0100, graham wrote: > Hi, > > I have a server running cups, with a wireless usb connector connected to a > remote Brother 5040 laser printer. It's always worked fine, modulo a little > crackle on the television when printing ;-) > > After upgrading the server to

usb/cups printer problem after etch upgrade

Hi, I have a server running cups, with a wireless usb connector connected to a remote Brother 5040 laser printer. It's always worked fine, modulo a little crackle on the television when printing ;-) After upgrading the server to etch (without any major problems) cups no longer sees the print

Re: Strange Printer Problem

Leonid Grinberg a magnifiquement tapoté sur son clavier avec ses gros doigts boudinés: Hello, This happened two weeks ago, and I ccan't seem to figure out why: I was trying to print a document from my printer, and it printed fine. Everything worked perfectly, and the paper came out great. Next,

Strange Printer Problem

Hello, This happened two weeks ago, and I ccan't seem to figure out why: I was trying to print a document from my printer, and it printed fine. Everything worked perfectly, and the paper came out great. Next, I opened another document that needed printing, but this time it wouldn't print! When I

Re: HP Deskjet 6840 Printer Problem

Michael Kerwin wrote: > I am trying to get an HP Deskjet 6840 inkjet Printer to work with my > Debian 3.1 Sarge stable system. > > I am trying to get it to work with lpr Use CUPS instead, and check out this article; It supposedly w

HP Deskjet 6840 Printer Problem

I am trying to get an HP Deskjet 6840 inkjet Printer to work with my Debian 3.1 Sarge stable system. I am trying to get it to work with lpr The name of the printer I am calling is the same name as its host name which is hp7efdfb, its local address is 200.0.0.117 I have it using port 9100 whic

Re: Diagnosing a printer problem

On Mon, May 30, 2005 at 12:06:58PM -0700, David E. Fox wrote: > > I'm on a modified Mepis system, and my apt.preferences are sitting now > at "experimental", probably a bad idea, but I did that so I could get > kde 3.4 installed. I just didn't set it back, and the other day I ran > an apt-get upda

Diagnosing a printer problem

I'm on a modified Mepis system, and my apt.preferences are sitting now at "experimental", probably a bad idea, but I did that so I could get kde 3.4 installed. I just didn't set it back, and the other day I ran an apt-get update && apt-get upgrade, and it upgraded a couple hundred packages in the

CUPS usb printer problem

I run into this maybe once a month. (installation details are at the bottom) my kyocera laser printer (usb) cuts out and won't respond. Restarting cups takes a very long time and the CUPS web pages don't show any problems with the cups system. The only messages in my syslog are: Dec 7 05:19:55 l

Re: parport printer problem under kernel 2.6 with asus mainboard

Try to load the modules:   ppdev and lp, my lsmod is following:   Module  Size  Used byppdev   8544  0lp 11852  0parport_pc 38880  1parport    41672  3 ppdev,lp,parport_pcautofs4    16320  0e100  

Re: Openoffice printer problem - A Bug?

On Tue, Nov 23, 2004 at 10:43:45PM -0500, Adam Aube wrote: > Thomas H. George wrote: > > > Since the local printer is installed and is working correctly I hesitate > > to delete and reinstall it. It would seem best to remove the printer > > from Openoffice and reinstall it there but I don't see h

Re: Openoffice printer problem

Thomas H. George wrote: > Since the local printer is installed and is working correctly I hesitate > to delete and reinstall it. It would seem best to remove the printer > from Openoffice and reinstall it there but I don't see how to do this. Have you looked under OpenOffice.org Printer Administ

Openoffice printer problem

Until the most recent dist-upgrade Openoffice had no trouble printing with the local printer, an HP 940C installed with Cups. The printer installation is correct. Lynx localhost:631 shows in as the default printer, available and accepting jobs. The test page prints perfectly and a simple tex

USB printer problem

Hi I have a problem using my printer. It's a canon S100. I am using CUPS and Debian Sarge (same problem with kernels 2.6.7, 2.6.8 and 2.4.27). When I try and print a test page (from the admin interface at localhost:631) I get either the message "Printer fault" or the message "USB port busy; will r

Re: parport printer problem under kernel 2.6 with asus mainboard

Hi Hendrik, On 30.07.2004 15:04, Hendrik Fuß wrote: are there known problems with parport on asus mainboards or is it just my fault? /dev/lp0 behaves like /dev/null, everything I print just disappears, no error or log messages. Even echo "hello world" > /dev/lp0 doesn't do anything. Under 2.4 kerne

parport printer problem under kernel 2.6 with asus mainboard

Hi, are there known problems with parport on asus mainboards or is it just my fault? /dev/lp0 behaves like /dev/null, everything I print just disappears, no error or log messages. Even echo "hello world" > /dev/lp0 doesn't do anything. Under 2.4 kernels everything works as expected. mainboard:

Re: New Cups printer problem

On Sat, Mar 01, 2003 at 03:15:55PM -0600, Donald Spoon wrote: > Thomas H. George,,, wrote: > >Printer is an HP DeckJet 940C > >Driver is Foomatic-hpijs downloaded from www.linuxprinting.org > > > >A print test from localhost:631 or from kde prints nothing. > > > >cat printtest.txt > /dev/lp0 prints

Re: New Cups printer problem

Thomas H. George,,, wrote: Printer is an HP DeckJet 940C Driver is Foomatic-hpijs downloaded from www.linuxprinting.org A print test from localhost:631 or from kde prints nothing. cat printtest.txt > /dev/lp0 prints the simple text file though it must be manually ejected. less /var/log/cups/erro

New Cups printer problem

Printer is an HP DeckJet 940C Driver is Foomatic-hpijs downloaded from www.linuxprinting.org A print test from localhost:631 or from kde prints nothing. cat printtest.txt > /dev/lp0 prints the simple text file though it must be manually ejected. less /var/log/cups/error_log ends in multiple line

Re: Printer Problem - An Insane Solution

Glenn English wrote: >On Mon, 2003-02-10 at 10:03, Thomas H. George,,, wrote: > >> PS. I was going to call this a cock-a-manie (sp?) solution but I can't >> find the word in any of our dictionaries. Anyone know a correct >> spelling and dictionary entry? > >Not at all sure, but I think it's "c

Re: Printer Problem - An Insane Solution

On Mon, 2003-02-10 at 10:03, Thomas H. George,,, wrote: > PS. I was going to call this a cock-a-manie (sp?) solution but I can't > find the word in any of our dictionaries. Anyone know a correct > spelling and dictionary entry? Not at all sure, but I think it's "cockamamie" - it's a term my g

Printer Problem - An Insane Solution

Problem: Epson Stylus Color 860 on usb to work with kde using cupsys and kdelibs3-cups and also to work from a terminal. If web intstallation is used (localhost:631) and the recommended driver from linuxprinting (Stylus_Color_860-gimp-print-cups.ppd) the printer works beautifully from kde BUT

Re: USB Printer Problem - Partial Fix

On Fri, Jan 24, 2003 at 10:53:56AM -0500, Stephen Gran wrote: > You'll want to use the gimp-print drivers for cups - they work very > nicely with Epson printers. Yes and No. Installed gimp and gimpprint-doc. Followed instructions and printer worked perfectly printing a picture. Installed cupsys

Re: USB Printer Problem

This one time, at band camp, Thomas H. George,,, said: > I have an Epson Stylus Color 860 attached to a USB port. I am using > CUPS and cupsomatic-ppd. localhost:631/printers shows Foomatic + > stp-4.0 and usb:/dev/usblp0. When I try Print Test Page nothing is > printed and the /var/log/cups

USB Printer Problem

I have an Epson Stylus Color 860 attached to a USB port. I am using CUPS and cupsomatic-ppd. localhost:631/printers shows Foomatic + stp-4.0 and usb:/dev/usblp0. When I try Print Test Page nothing is printed and the /var/log/cups/error_log lists GNU Ghostscript 7.05: Unrecoverable error,

Printer problem

I can print with pr |lpr. I have downloaded the browsers, Netscape 6 and Opera 5, as well as Star Office. On none of these can I print using the printer button. It seems unlikely that all are flawed so I must assume that something is wrong with my configuration. If somebody knows how to get my

re: printer problem

I have discovered that apsfilterconfig writes three filters for my Brother HL-730 laser printer (which can simulate an HP LJIIP). In the printcap file it generates I find ascii|jet2p-letter-ascii-mono|jet2p lp|jet2p-letter-auto-mono|jet2p raw|jet2p-letter-raw|jet2p.

Re: printer problem

On Wed, 23 May 2001, Wayne Topa wrote: > > > Subject: printer problem > Date: Tue, May 22, 2001 at 07:23:54PM -0500 > > In reply to:Thomas H. George > > Quoting Thomas H. George([EMAIL PROTECTED]): > > Trying to make printer (brother HL-730 on parall

Re: printer problem

Subject: printer problem Date: Tue, May 22, 2001 at 07:23:54PM -0500 In reply to:Thomas H. George Quoting Thomas H. George([EMAIL PROTECTED]): > Trying to make printer (brother HL-730 on parallel port) work from > debian linux 2.2.19: > > lp testtxt > > a

printer problem

Trying to make printer (brother HL-730 on parallel port) work from debian linux 2.2.19: lp testtxt and from Abiword in ximian gnome desk top. Compiled the kernel with parallel printer support and autoprobe. cat testtxt > /dev/lp0 works. On advice from ximian gnome chat group ran apt-get

usb printer problem

I successfully built a 2.2.19 kernel with usb support. cat /proc/bus/usb/drivers shows drivers loaded, cat /proc/bus/usb/devices shows only pci. I have none/proc/bus/usbusbdevfsdefaults00 in fstab. After booting up dmesg reports parport_probe: failed parport0: no IE

Re: Printer Problem Solved..sorta..

Doing some investigation, I find the problem lies more with StarOffice 5.2 than it does with my printer configuration. I changed lpd to lprng and have configured it. ABI word prints fine, I can print from mutt, netscape, lyx, etc.. but nothing happens with StarOffice, the printer just keeps spittin

Printer Problem

Having just done another debian 2.2 reinstall, I'm having some printer problems. I have installed the apsfilter package and it works fine printing from netscape and printing text files, etc.. The problem is when I try to print from StarOffice. The printer starts but nothing is printed to the page.

printer problem, sending problem

My printer is only printing numbers, always the same. I did a strace lpr file and I don't understand the messages, but I think that there is a problem with printing. My other problem is that I am writing this mail from my computer at the university and I don't manage to transfer the file with the

Re: Printer Problem

on Sun, Mar 18, 2001 at 07:59:35PM +0100, Stephan Kulka ([EMAIL PROTECTED]) wrote: > When I try to print out a file , I get the following message: > > >[EMAIL PROTECTED] - cannot open connection Connection refused > >Make sure LPD server is running on the system. > > I am quite confused, because

Printer Problem

When I try to print out a file , I get the following message: >[EMAIL PROTECTED] - cannot open connection Connection refused >Make sure LPD server is running on the system. I am quite confused, because the lpd daemon is started at startup (I even rebooted to be sure). What is this LPD?? My networ

Re: Printer Problem

On Fri, Feb 02, 2001 at 03:03:31PM -0500, Thomas H. George,,,610-444-2626 wrote: > I was surprised! After running dmesg I found my printer working again. > I don't understand why this is so but, as I had done nothing else (I > send these messages from another computer), dmseg must have correcte

Re: Printer Problem

I was surprised! After running dmesg I found my printer working again. I don't understand why this is so but, as I had done nothing else (I send these messages from another computer), dmseg must have corrected the problem. Thanks again for the help. Tom George Thomas H. George,,,610-444-26

Re: Printer Problem

Thanks for the suggestion; I had not yet learned about dmesg. Unfortunately, dmesg reported all in order with parport - i.e. using 0378 and irq 7. I must look elsewhere for my problem. Tom George ktb wrote: On Fri, Feb 02, 2001 at 11:01:26AM -0500, Thomas H. George,,,610-444-2626 wrote: M

Re: Printer Problem

Thanks for the suggestion.  I had not learned about dmesg.  Unfortunately it reported everything in order - i.e. parport0 using 0378 and irq 7.  I must look elsewhere for the problem. Tom George ktb wrote: On Fri, Feb 02, 2001 at 11:01:26AM -0500, Thomas H. George,,,610-444-2626 wrote: My print

Re: Printer Problem

On Fri, Feb 02, 2001 at 11:01:26AM -0500, Thomas H. George,,,610-444-2626 wrote: > My printer was working perfectly. I rebuilt the kernel allowing > autoprobe. Printer no longer responds even to > >cat lptest > /dev/lp0 where lptest is a small text file > > and > >lp

Printer Problem

My printer was working perfectly. I rebuilt the kernel allowing autoprobe. Printer no longer responds even to cat lptest > /dev/lp0 where lptest is a small text file and lp lptest responds normally but nothing is printed and nothing is in the print que. cat /

Printer problem

I tried to set up my printer using apsfilter. I have a hp 815 (I think that its a variation on the 810 with extra language support) I tried using the cdjcolor driver (It was the only one apropriate that was found, aps filter tried to add a sufix to hpdj which made it not work, and the driver for th

  1   2   >