On Sun, Sep 05, 2021 at 09:38:34AM -0400, Cindy Sue Causey wrote:
> There's also that thing about how terminals will interpret the
> different types of quotes (dumb/typewriter/ASCII versus
> typographic/curly/smart) very literally. I experienced THAT fail
> firsthand and now try to remember to plug
On 9/5/21, Greg Wooledge wrote:
> On Sun, Sep 05, 2021 at 12:28:37AM -0500, Intense Red wrote:
>> > In /root/.bashrc I use this to give a red prompt including host and
>> > full path followed by a new line.
>>
>>I take this idea a bit further, se
On Sun, Sep 05, 2021 at 12:28:37AM -0500, Intense Red wrote:
> > In /root/.bashrc I use this to give a red prompt including host and
> > full path followed by a new line.
>
>I take this idea a bit further, setting a longer prompt and setting
> workstation hosts for spe
On 9/5/21, Intense Red wrote:
>> In /root/.bashrc I use this to give a red prompt including host and
>> full path followed by a new line.
>
>I take this idea a bit further, setting a longer prompt and setting
> workstation hosts for specific colors for user logins,
> In /root/.bashrc I use this to give a red prompt including host and
> full path followed by a new line.
I take this idea a bit further, setting a longer prompt and setting
workstation hosts for specific colors for user logins, and then doing a red
prompt for servers.
Part
On 2021-04-26 02:43 PM, Steve Dondley wrote:
I downloaded and ran this docker image: https://hub.docker.com/_/debian
It works, but typically when I hit the ctrl-p key at the bash prompt,
it acts like the up arrow key and shows the previous command.
However, I have to hit ctrl-p twice to show
I downloaded and ran this docker image: https://hub.docker.com/_/debian
It works, but typically when I hit the ctrl-p key at the bash prompt, it
acts like the up arrow key and shows the previous command.
However, I have to hit ctrl-p twice to show the previous command and
twice each time to
is some basic and fairly simple may to remove that obstacle.
>
> Can someone tell me how to arrange things so that I have no prompt for
> login keyring authentication when opening mail account in `evolution'.
>
> I don't mean password for mail account but I get prompted fo
how to arrange things so that I have no prompt for
login keyring authentication when opening mail account in `evolution'.
I don't mean password for mail account but I get prompted for login
keyring auth that I know nothting about. When it comes up everything
else freezes until I deal
On Fri, Dec 13, 2019 at 04:50:18PM -0600, David Wright wrote:
> > PS1='\u@\h $(date +"%d %b %Y %H:%M:%S") :\w\$ '
>
> Could \D{format} not do that?
Oh, good catch. I've... never used that before. ;-) I scanned the
PROMPTING section of the man page too quickly and only saw
the \t \T \@ \A parts.
> if [ "$color_prompt" = yes ]; then
>
> PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\$
> '
You forgot to add "\d", in PS1 value, that explains different behavior
of prompt in console and Guake
On Fri 13 Dec 2019 at 14:36:09 (-0500), Greg Wooledge wrote:
> On Fri, Dec 13, 2019 at 07:20:53PM +, shirish शिरीष wrote:
> > Can somebody share how can I have a common prompt which is ok both by
> > bash and guake ?
>
> guake...? No idea what that is. apt-cache says
shirish ??? wrote:
> at bottom :-
>
> On 13/12/2019, Dan Ritter wrote:
> > shirish ??? wrote:
> >> Dear all,
> >>
> >> Can somebody share how can I have a common prompt which is ok both by
> >> bash and guake ?
> &g
at bottom :-
On 13/12/2019, Dan Ritter wrote:
> shirish ??? wrote:
>> Dear all,
>>
>> Can somebody share how can I have a common prompt which is ok both by
>> bash and guake ?
>>
>> bash is -
>>
>> $ guake --version
>> Gu
On Fri, Dec 13, 2019 at 07:20:53PM +, shirish शिरीष wrote:
> Can somebody share how can I have a common prompt which is ok both by
> bash and guake ?
guake...? No idea what that is. apt-cache says it's a terminal. So
I'm just going to assume that it works like any other
shirish ??? wrote:
> Dear all,
>
> Can somebody share how can I have a common prompt which is ok both by
> bash and guake ?
>
> bash is -
>
> $ guake --version
> Guake Terminal: 3.6.3
> VTE: 0.58.2
> VTE runtime: 0.58.2
> Gtk: 3.24.13
>
Dear all,
Can somebody share how can I have a common prompt which is ok both by
bash and guake ?
bash is -
$ bash -version
GNU bash, version 5.0.11(1)-release (x86_64-pc-linux-gnu)
Copyright (C) 2019 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.
Hi,
i meant not
[...] man bas, section PROMPTING.
but rather
[...] man bash, section PROMPTING.
Have a nice day :)
Thomas
Hi,
Stephen P. Molnar wrote:
> or some reason the Xcfc4-Termial is:
> (base) comp@AbNormal:~$
> rather than:
> comp@AbNormal:~$
Check the content of the environment variable PS1.
me@myhost:~> echo $PS1
\u@\h:\W>
The meaning of the "\"-codes is explained in man bas, section PROMPTING.
I gues
I have just installed Anaconda 19-10 on my up to date Buster platform as
user. For some reason the Xcfc4-Termial is:
(base) comp@AbNormal:~$
rather than:
comp@AbNormal:~$
which is what the installer created.
What is going on here, and how do I get the prompt back?
The root prompt is
; >
> > execute a script
> > print a string
>
> Are you actually able to discern the OP's desires? I can't. I found
> everything they said in this thread completely impenetrable. At first
> I thought they wanted to write a script that would change the bash
rn the OP's desires? I can't. I found
everything they said in this thread completely impenetrable. At first
I thought they wanted to write a script that would change the bash
prompt by setting the PS1 variable
> If you make your screen narrow before you cut and paste, you won'
On Tue 03 Sep 2019 at 15:07:43 (+), Larry Dighera wrote:
> On Mon, 02 Sep 2019 08:48:50 +0200, Computer Planet
>
> wrote:
>
> >Is It possible to print of a string at the exit of a bash script?
>
> Have a look at `man bash` and search for 'trap.'
Trap is designed to break the sequential fl
On Mon, 02 Sep 2019 08:48:50 +0200, Computer Planet
wrote:
>Is It possible to print of a string at the exit of a bash script?
Have a look at `man bash` and search for 'trap.'
trap [-lp] [[arg] sigspec ...]
The command arg is to be read and executed when the
shell receives signa
st your wishes). We don't read minds.
> Now, I ask the question in other terms:
> Is It possible to print of a string at the exit of a bash script?
> e.g.: user@mypc: # bash script has just finished! [prompt]
> with the prompt that remains immediately after the string printed.
>
On Mon, Sep 02, 2019 at 09:30:44AM +0200, Thomas Schmitt wrote:
> Hi,
>
> Computer Planet wrote:
> > Is It possible to print of a string at the exit of a bash script?
> > e.g.: user@mypc: # bash script has just finished! [prompt]
> > with the prompt that remains i
Hi,
Computer Planet wrote:
> Is It possible to print of a string at the exit of a bash script?
> e.g.: user@mypc: # bash script has just finished! [prompt]
> with the prompt that remains immediately after the string printed.
Do you mean something like this ?
$ echo -n 'use
On Mon, Sep 02, 2019 at 08:48:50AM +0200, Computer Planet wrote:
> Thanks guys,
> but this is not the solution I'm looking for ...
> Now, I ask the question in other terms:
> Is It possible to print of a string at the exit of a bash script?
Hm. You mean
echo
Still a bit confused about where y
Thanks guys,
but this is not the solution I'm looking for ...
Now, I ask the question in other terms:
Is It possible to print of a string at the exit of a bash script?
e.g.: user@mypc: # bash script has just finished! [prompt]
with the prompt that remains immediately after the string pr
On Sun, Sep 01, 2019 at 03:22:32PM -0400, Lee wrote:
[...]
> You have to source the script instead of running it.
Yes, exactly.
> I'm not entirely clear about a new shell gets it's own env that
> disappears when the shell exits thing, but try this:
It's not only a shell thing. It's a basic Uni
#\[\033[91m\] "
> so that after finishing the script the prompt will write in red...?
>
> If I try in prompt # PS1="\[\e]0;\u@\h:
> \w\a\]${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w
> #\[\033[91m\] "
> command no problem, write in
\033[00m\]:\[\033[01;34m\]\w
> #\[\033[91m\] "
> so that after finishing the script the prompt will write in red...?
>
> If I try in prompt # PS1="\[\e]0;\u@\h:
> \w\a\]${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w
> #\[\033[91m\] &
Hi guys!
I'm trying, trying and trying but...
How I Can put in hte end of a bash script this command:
PS1="\[\e]0;\u@\h:
\w\a\]${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w
#\[\033[91m\] "
so that after finishing the script the prompt wi
Schmitt wrote:
John Crawley wrote:
In Buster, the launching dash shell dies *immediately* and the bash
prompt returns, even while the new window is still open.
tomas wrote:
that most probably is due to a change
in behaviour of "x-terminal-emulator".
My suspicion too. If the x-terminal-emu
y shell.
[I don't see any photos attached. (The entire email is only 4.3kB)]
But I have struggled to find out what program is expected to issue
the prompt and collect the passphrase under various circumstances
(eg unlocking at boot, or unlocking later).
> вт, 28 мая 2019 г., 9:38 d
gt;> be prompted on each upgrade for the list of services you wish to
>> restart. You
>> can choose this option to avoid being prompted; instead, all necessary
>> restarts
>> will be done for you automatically so you can avoid being asked questions on
>> each library u
You
> can choose this option to avoid being prompted; instead, all necessary
> restarts
> will be done for you automatically so you can avoid being asked questions on
> each library upgrade.
> Restart services during package upgrades without asking?
> 1: Yes 2: No [*]
>
u can avoid being asked questions on
each library upgrade.
Restart services during package upgrades without asking?
1: Yes 2: No [*]
Prompt: '?' for help, default=2>
If I use 'DEBIAN_FRONTEND=noninteractive' it works and will use the
default value and I don't get a
> The opinion is that it is a bug. See
>
> https://lists.debian.org/debian-devel/2019/06/msg0.html
Thank you for the feedback. I have filed a bug report for this issue.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=929834
Please note that this issue does not occur if using the slick-greet
rmally.
> >
> > Also, switching to another VT when the monitor turns off and switching
> > back displays the unlock prompt normally.
> >
> > The closest I could find online was this:
> > https://bbs.archlinux.org/viewtopic.php?id=240200 wherein installi
on.
>
> Typing the password without any visual feedback (while the monitor
> continues to be in the power save state) unlocks the screen and my
> session is displayed normally.
>
> Also, switching to another VT when the monitor turns off and switching
> back displays the unlock p
he monitor back on.
>
> Typing the password without any visual feedback (while the monitor
> continues to be in the power save state) unlocks the screen and my
> session is displayed normally.
>
> Also, switching to another VT when the monitor turns off and switching
> back displays the u
continues to be in the power save state) unlocks the screen and my
session is displayed normally.
Also, switching to another VT when the monitor turns off and switching
back displays the unlock prompt normally.
The closest I could find online was this:
https://bbs.archlinux.org/viewtopic.php?id
quiet) systemd stops
> on waiting for partition, but no any password prompt. I try to boot with
> plymouth (ro quiet splash), but it does not help me. I may boot only using
> "recovery mode". In this case system asks me for password and I may enter
> it (but there are lot of
I have examine initramfs image and found that it is not tries to mount
encrypted partitions other than root. Moreover, it is confirmed by dmesg
output: systemd starts before mounting of /var and /home So it is not
initrd problem. Problem somethere in system.
Best regards,
Sergey Belyashov
вт, 28
Sergey Belyashov wrote:
> As expected nothing is changed. I did not forget to run update-initramfs
> after change of fstab.
> Attached 3 photos: normal boot, recovery boot before pasword enter,
> recovery boot after password and Ctrl-D in recovery shell.
I am not a systemd expert. The images does
As expected nothing is changed. I did not forget to run update-initramfs
after change of fstab.
Attached 3 photos: normal boot, recovery boot before pasword enter,
recovery boot after password and Ctrl-D in recovery shell.
Best regards,
Sergey Belyashov
вт, 28 мая 2019 г., 9:38 deloptes :
> Serg
I'll try your suggestion. But I think problem is not here. Password ask is
after mounting all other filesystems, swapon and flush of journald:
[9.986320] intel_rapl: Found RAPL domain uncore
[ 10.203636] EXT4-fs (md0p2): mounted filesystem with ordered data mode.
Opts: (null)
[ 10.203981]
Sergey Belyashov wrote:
> Root partition is on mdraid but is not encrypted. Home is encrypted only.
> Modules are set to most already.
>
I have this setup on my server, but I removed all crypted entries from fstab
because obviously I can not sit infront of the server to type the password
when bo
Root partition is on mdraid but is not encrypted. Home is encrypted only.
Modules are set to most already.
вт, 28 мая 2019 г., 9:06 deloptes :
> Sergey Belyashov wrote:
>
> > My problem is about than year old or more. With default options (without
> > plymouth) only information about root partiti
Ross Boylan wrote:
> I've discovered that if I type my pass-phrase (waiting long enough
> that I think things have settled down), the system boots.
>
Have you tried setting up the display parameters properly in grub? Sometimes
on notebooks the default settings are different and do not match pred
Sergey Belyashov wrote:
> My problem is about than year old or more. With default options (without
> plymouth) only information about root partition mount or fsck. Later it
> replaced by partition waiting "progress" (moving red asterisks). I have
> try to wait about a minute and try to enter luks
My problem is about than year old or more. With default options (without
plymouth) only information about root partition mount or fsck. Later it
replaced by partition waiting "progress" (moving red asterisks). I have try
to wait about a minute and try to enter luks password, but no any changes.
I t
For at least the last couple of weeks I've had the screen go
completely blank during bootup, after displaying initial messages (I
changed from "quiet" to "debug" for kernel startup). This is with a
luks encrypted root. I saw it under jessie and buster. I blamed
failing hardware (I can't get into
I have system with soft raid and /home is encrypted (one of raid1
partitions is encrypted using luks with password). When I boot it using
default boot kernel options (ro quiet) systemd stops on waiting for
partition, but no any password prompt. I try to boot with plymouth (ro
quiet splash), but it
I have system with soft raid and /home is encrypted (luks with password).
When I boot it using default boot kernel options (ro quiet) systemd stops
on waiting for partition, but no any password prompt. I try to boot with
plymouth (ro quiet splash), but it does not help me. I may boot only using
Short version: why doesn't my PC prompt for its passphrase on tty1?
Long version...
I have a 'stretch' PC used as a home server, so it doesn't normally
require a monitor and keyboard. It has an encrypted filesystem and on
boot it asks for the passphrase with this prompt,
An update.
On Sun, Jun 10, 2018 at 08:03:31PM +0300, Reco wrote:
> Hi.
>
> On Sun, Jun 10, 2018 at 07:06:57PM +0300, Michelle Konzack wrote:
> > Am 2018-06-10 hackte Reco in die Tasten:
> > > Hi.
> > >
> > > On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
> > >> Good day
Hi.
On Sun, Jun 10, 2018 at 07:06:57PM +0300, Michelle Konzack wrote:
> Am 2018-06-10 hackte Reco in die Tasten:
> > Hi.
> >
> > On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
> >> Good day,
> >>
> >> I run Stretch on my Laptop with sysvinit.
> >>
> >> I had setup so
Am 2018-06-10 hackte Reco in die Tasten:
> Hi.
>
> On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
>> Good day,
>>
>> I run Stretch on my Laptop with sysvinit.
>>
>> I had setup some profiles and tried to start them by passing 2, 3,
>> 4, 5 at the end of the Kernel commandli
Hi.
On Sun, Jun 10, 2018 at 02:25:30PM +0300, Michelle Konzack wrote:
> Good day,
>
> I run Stretch on my Laptop with sysvinit.
>
> I had setup some profiles and tried to start them by passing 2, 3,
> 4, 5 at the end of the Kernel commandline (I use LILO) but the
> appropriated runnlevel
Good day,
I run Stretch on my Laptop with sysvinit.
I had setup some profiles and tried to start them by passing 2, 3,
4, 5 at the end of the Kernel commandline (I use LILO) but the
appropriated runnlevel ist not entered.
Do I mis something?
Since systemd anything is screwed up und nothing is w
t; The consequence (if not post hoc ergo propter hoc) of these messages
> appearing is that it makes the LUKS passphrase prompt to use bépo. Now I know
> it, it"s not really a problem for typing the passphrase, but I really think
> this is a bug, as there was no clear warning about
dead key, which allows to
type Greek letters using the Latin equivalent. I say "supposed" as Debian does
not support it yet.
The consequence (if not post hoc ergo propter hoc) of these messages appearing
is that it makes the LUKS passphrase prompt to use bépo. Now I know it, it's
On 9/19/16, Reco wrote:
>
> On Mon, Sep 19, 2016 at 11:01:33AM -0400, Tony Baldwin wrote:
>> On 09/19/2016 10:25 AM, Reco wrote:
>> >
>> >On Mon, Sep 19, 2016 at 09:59:03AM -0400, Tony Baldwin wrote:
>> >>I had, on a prior machine, changed th
* Reco [2016-09-19 18:21 +0300]:
[...]
> This line in /etc/sudoers works for me:
>
> Defaults passprompt_override,passprompt="ENTER NUCLEAR LAUNCH CODE:"
Try this:
Defaults passprompt_override,passprompt="^[[41;33;01mENTER NUCLEAR LAUNCH CODE:
^[[00m"
Elimar
--
"Talking much about onese
Hugo Vanwoerkom wrote:
> On 09/19/2016 10:21 AM, Reco wrote:
>> Defaults passprompt_override,passprompt="ENTER NUCLEAR LAUNCH CODE:"
>>
>> Of course you should use visudo, not edit /etc/sudoers directly.
> True. But I use mc, have done so for years and that seems to work. What
> am I endangerin
On 09/19/2016 10:21 AM, Reco wrote:
Hi.
On Mon, Sep 19, 2016 at 11:01:33AM -0400, Tony Baldwin wrote:
On 09/19/2016 10:25 AM, Reco wrote:
Hi.
On Mon, Sep 19, 2016 at 09:59:03AM -0400, Tony Baldwin wrote:
I had, on a prior machine, changed the password prompt for sudo by
On 09/19/2016 11:21 AM, Reco wrote:
Defaults passprompt_override,passprompt="ENTER NUCLEAR LAUNCH CODE:"
Thanks, this was exactly what I needed!
and I'll use visudo, of course.
Tony
--
http://tonybaldwin.me
all tony, all the time
Hi.
On Mon, Sep 19, 2016 at 11:01:33AM -0400, Tony Baldwin wrote:
> On 09/19/2016 10:25 AM, Reco wrote:
> > Hi.
> >
> >On Mon, Sep 19, 2016 at 09:59:03AM -0400, Tony Baldwin wrote:
> >>I had, on a prior machine, changed the password prompt for sudo b
On 09/19/2016 10:25 AM, Reco wrote:
Hi.
On Mon, Sep 19, 2016 at 09:59:03AM -0400, Tony Baldwin wrote:
I had, on a prior machine, changed the password prompt for sudo by adding
something (it was "ENTER NUCLEAR LAUNCH CODE:" in fact) to the sudoers file,
but at the moment
Hi.
On Mon, Sep 19, 2016 at 09:59:03AM -0400, Tony Baldwin wrote:
> I had, on a prior machine, changed the password prompt for sudo by adding
> something (it was "ENTER NUCLEAR LAUNCH CODE:" in fact) to the sudoers file,
> but at the moment I can not recall what/how I d
I had, on a prior machine, changed the password prompt for sudo by
adding something (it was "ENTER NUCLEAR LAUNCH CODE:" in fact) to the
sudoers file, but at the moment I can not recall what/how I did it, but
I'd like to do it again.
Anyone?
TIA
Tony
--
http://tonybaldwin.m
August Karlstrom:
> On 2015-09-27 14:40, Jochen Spieker wrote:
>>
>> That's a kernel message that is apparently considered important enough
>> to print it on all VTs, irrespective of their current content.
>
> OK, I see. Thanks for the info, Jochen. Still, I think it looks like a mess.
Sure, but
Quoting August Karlstrom (fusionf...@gmail.com):
> On 2015-09-27 14:40, Jochen Spieker wrote:
> >August Karlstrom:
> >>Today when I started my computer running Debian 8.2 the following error
> >>message was displayed at the login prompt (where the user name
On 2015-09-27 14:40, Jochen Spieker wrote:
August Karlstrom:
Today when I started my computer running Debian 8.2 the following error
message was displayed at the login prompt (where the user name go):
macmini login: [ 1615.712744] usb 3-3: 1:1: cannot get freq at ep 0x1
My question
August Karlstrom:
>
> Today when I started my computer running Debian 8.2 the following error
> message was displayed at the login prompt (where the user name go):
>
> macmini login: [ 1615.712744] usb 3-3: 1:1: cannot get freq at ep 0x1
>
> My question is not so
Hi,
Today when I started my computer running Debian 8.2 the following error
message was displayed at the login prompt (where the user name go):
macmini login: [ 1615.712744] usb 3-3: 1:1: cannot get freq at ep 0x1
My question is not so much about the error message but rather why such
Hi,
I'm trying preseeded installation with the Jessie netinst CD ISO. Everything
seems to work fine, except one prompt that still stalls until manual
confirmation for the drive to erase/format/use for target installation.
My preseed file and the screenshot of the dailog prompt can be fou
You are required to click on the link to verify your email account
because we are upgrading our
webmail.http://usenglishacademy.com/usdemo/e/update/
Webmail Technical Support
Copyright 2012. All Rights Reserved
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "
Upon upgrading from wheezy to jessie using
linux-image-3.16.0-4-686-pae_3.16.7-ckt11-1_i386.deb for the kernel, I
discovered that I would get stuck at an initramfs prompt complaining
about md arrays not being found.
When inspecting the directories, the entire /dev/disk directory was
missing
I use, mainly the netinst.iso myself - and for Debian5, debian7 and debian8
it has worked (debian 5 on Power4 - standalone and Power5 - virtual, but
need a whole disk), debian6 I got to work - eventually (Power5 only tried),
but needed to patch yaboot everytime so I waited for Debian7. Debian7
work
On Fri, Jun 05, 2015 at 02:58:38PM +0200, Michael Felt wrote:
> 10 days late replying - my apologies.
> PowerPC - if I read that in a literal sense - is that basically "oldish"
> Macs that were build on the PowerPC processor. If the answer is yes, is
> there any interest in the Ubuntu Community to
you boot with usb.
>
> https://wiki.ubuntu.com/PowerPCFAQ#How_do_I_boot_from_a_USB_drive.3F
>
> Sent from my iPhone
>
> On May 26, 2015, at 2:37 AM, Clark Wang wrote:
>
> On Tue, May 26, 2015 at 3:05 PM, yu wrote:
>
>> As I know, yaboot can't set vmlinux and in
On Tue, May 26, 2015 at 3:11 PM, Petter Adsen wrote:
>
> Booting from the network is rather easy, and it is a nice thing to have
> set up in case you might need it in a situation like this. Both of my
> desktop machines at home are set up to boot from each other in case the
> root disk fails on o
at the same time in its
>> prompt, the right way is to load an alternative config file, such as
>> "conf file=/boot/deb/yaboot.conf", but in this yaboot.conf, both
>> vmlinux and initrd.gz are under /, the path is incorrect.
>>
>> so I guess you can write a ne
On Tue, May 26, 2015 at 3:05 PM, yu wrote:
> As I know, yaboot can't set vmlinux and initrd at the same time in its
> prompt, the right way is to load an alternative config file, such as
> "conf file=/boot/deb/yaboot.conf", but in this yaboot.conf, both
> vmlinux and
On Tue, May 26, 2015 at 3:11 PM, Petter Adsen wrote:
> > >
> > > Can the machine boot from a USB flash drive? Or over the network?
> > > One of these approaches might be easier for you.
> > >
> >
> > I'm trying to find out how to boot form USB. Boot from network also
> > sounds good. I'll investi
As I know, yaboot can't set vmlinux and initrd at the same time in its
prompt, the right way is to load an alternative config file, such as
"conf file=/boot/deb/yaboot.conf", but in this yaboot.conf, both
vmlinux and initrd.gz are under /, the path is incorrect.
so I guess you
> > > > installation images (downloaded from here) under `/boot/deb/`:
> > > > >
> > > > > /boot/deb/initrd.gz
> > > > > /boot/deb/vmlinux
> > > > > /boot/deb/yaboot
> > > > > /boot/deb/yaboot.conf
> >
/boot/deb/vmlinux
> > > > /boot/deb/yaboot
> > > > /boot/deb/yaboot.conf
> > > >
> > > > So how can I boot the netboot installation images from the `boot:`
> > > > prompt and reinstall Debian 8?
> >
ian 8 netboot installation images
> > > (downloaded from here) under `/boot/deb/`:
> > >
> > > /boot/deb/initrd.gz
> > > /boot/deb/vmlinux
> > > /boot/deb/yaboot
> > > /boot/deb/yaboot.conf
> > >
> > > So how can
netboot installation images from the `boot:`
> prompt and reinstall Debian 8?
>
> I tried `boot: hd:3,/boot/deb/vmlinux root=/dev/ram read-only
> initrd=/boot/deb/initrd.gz initrd-size=300` but it did not work.
> (The screenshot taken with my phone.)
>
>
> Thanks.
>
>
/boot/deb/initrd.gz
> > /boot/deb/vmlinux
> > /boot/deb/yaboot
> > /boot/deb/yaboot.conf
> >
> > So how can I boot the netboot installation images from the `boot:`
> > prompt and reinstall Debian 8?
> >
> > I tried `boot: hd:3,/b
s from the `boot:` prompt
and reinstall Debian 8?
I tried `boot: hd:3,/boot/deb/vmlinux root=/dev/ram read-only
initrd=/boot/deb/initrd.gz initrd-size=300` but it did not work. (The
screenshot taken with my phone. <http://i.stack.imgur.com/mica0.jpg>)
Thanks.
-clark
John Hasler wrote:
> Bob Proulx writes:
> > When libc is initially upgraded for the first time it will ask you if
> > you want to restart services. You can answer yes or no at that time.
> > But once that option has been set I don't know of a way to change it.
>
> "dpkg-reconfigure libc6" should
Bob Proulx writes:
> When libc is initially upgraded for the first time it will ask you if
> you want to restart services. You can answer yes or no at that time.
> But once that option has been set I don't know of a way to change it.
"dpkg-reconfigure libc6" should do it.
--
John Hasler
jhas...
On Friday 30 January 2015 00:10:18 Gene Heskett wrote:
> On Thursday 29 January 2015 09:19:30 Lisi Reisz did opine
>
> And Gene did reply:
> > On Thursday 29 January 2015 13:35:49 Gene Heskett wrote:
> > > To get the fixes into use, you MUST
> > > reboot, no way around it. To do otherwise WILL lea
Mihamina RAKOTOMANDIMBY wrote:
> Yes, but how to default the upgrade process to ("dont restart" && "dont even
> ask")?
> I *will* restart the services, but I will do it manually, in order to check
> for functional regression.
> Prior to the manual restart of services, I need to *blindly* upgrade gl
On Thursday 29 January 2015 09:19:30 Lisi Reisz did opine
And Gene did reply:
> On Thursday 29 January 2015 13:35:49 Gene Heskett wrote:
> > To get the fixes into use, you MUST
> > reboot, no way around it. To do otherwise WILL leave the machine
> > vulnerable.
>
> No, you do not necessarily have
1 - 100 of 608 matches
Mail list logo