--- Chris Phillips [EMAIL PROTECTED] wrote:
Hi all,
I have just installed Sarge on my old PII at home
(after the fedora upgrade trashed the system).
The system is up and running, however I cannot
figure
out how to get the ISA NE2000 ethernet card working
properly.
If I do a
--- Chris Phillips xhxhrisphillipsahoo.com.auauwrote:
Hi all,
I have just installed Sarge on my old PIPIIt home
(after the fedora upgrade trashed the system).
The system is up and running, however I cannot
figure
out how to get the ISA NE2000 etethernetard working
properly.
If I do
On Wed, Aug 10, 2005 at 03:42:53PM +1000, Chris Phillips wrote:
Its worth giving a go, but I still don't understand
why the options I have set in modules.conf are not
being picked up.
Are you using Kernel 2.6?
If so, the configuration should be located in
/etc/modprobe.conf or /etc/modprobe.d/
Hi Mirko
Are you using Kernel 2.6?
Yes. This is a fairly crucial bit of info I ommited (I
knew there was somthing else I should mention when I
was posting the message).
If so, the configuration should be located in
/etc/modprobe.conf or /etc/modprobe.d/ .
OK that will be it. I cannot test
Hi all,
I have just installed Sarge on my old PII at home
(after the fedora upgrade trashed the system).
The system is up and running, however I cannot figure
out how to get the ISA NE2000 ethernet card working
properly.
If I do a
modprobe ne io=0x340 irq=9
ifup eth0
Everything works
On Tue, Aug 09, 2005 at 11:24:33PM +1000, Chris Phillips wrote:
Hi all,
I have just installed Sarge on my old PII at home
(after the fedora upgrade trashed the system).
The system is up and running, however I cannot figure
out how to get the ISA NE2000 ethernet card working
properly.
Have you considered using the isapnptools package?
I am guessing that
since the machine is a P-II, it is PnP compliant.
Its worth giving a go, but I still don't understand
why the options I have set in modules.conf are not
being picked up.
Cheers
Chris
Send instant messages to your online
7 matches
Mail list logo
