- Original Message -
From: "hogan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; ; "LUV-talk
mailing list" <[EMAIL PROTECTED]>
Sent: Sunday, February 18, 2001 1:44 AM
Subject: Re: Serial ports - how to get them to coexist peacefully...
Only proble
> What I did when presented with this problem was to do a bit of surgery on
the old
> ISA board and change its IRQ to a spare in the computer I was using. I cut
one
> track solder a wire the new interrupt pad to get it to work. With setserial
and
> this setup I was able to run four Serial Terminals
hogan wrote:
>
> Can I make the onboard and oncard ttyS's play nice on same IRQ?
> or should I play musical jumpers until they're on separate IRQs?
>
What I did when presented with this problem was to do a bit of surgery on the
old
ISA board and change its IRQ to a spare in the computer I
On Sat, Feb 17, 2001 at 03:16:44AM +1100, hogan wrote:
> Can I make the onboard and oncard ttyS's play nice on same IRQ?
no.
> or should I play musical jumpers until they're on separate IRQs?
yes.
> Read something in 2.4.1 kernel config about making serial ports nice to one
> another when
On Friday 16 February 2001 17:27, Sean 'Shaleh' Perry wrote:
> > Can I make the onboard and oncard ttyS's play nice on same IRQ?
> > ... or should I play musical jumpers until they're on separate
> > IRQs?
>
> I would change the jumpers. Hoping the software ca multiplex is a
> recipe for disaster.
On Sat, Feb 17, 2001 at 03:16:44AM +1100, hogan wrote:
> P133, 48MB RAM, Debian Testing/Unstable (some bits from unstable) 2.2.17 (move
> to 2.4.1 on hold for time being whilst I read Rusty's howtos on netfilter etc.
> :) ).
>
> Have two onboard ports - ttyS0 and ttyS1 (IRQ 4&3 respectively)
> Hav
>
> Can I make the onboard and oncard ttyS's play nice on same IRQ?
> ... or should I play musical jumpers until they're on separate IRQs?
>
I would change the jumpers. Hoping the software ca multiplex is a recipe for
disaster.
> Read something in 2.4.1 kernel config about making serial ports
P133, 48MB RAM, Debian Testing/Unstable (some bits from unstable) 2.2.17 (move
to 2.4.1 on hold for time being whilst I read Rusty's howtos on netfilter etc.
:) ).
Have two onboard ports - ttyS0 and ttyS1 (IRQ 4&3 respectively)
Have an ISA IO card (everything disabled on card save ttyS3 and "lpt3"
8 matches
Mail list logo
