morning,
I have a software Raid 1 setup with 2 disks.
/dev/hdc1
/dev/hdd1
I've noticed that preformance has slowed a bit since the raid setup.
I also have both disks on the same controller.
Would it make a difference if the disks were on seperate controllers?
ex.
Move /dev/hdd1 to /dev/hda1,
hi ya mike
On Wed, 26 May 2004, mike wrote:
morning,
I have a software Raid 1 setup with 2 disks.
/dev/hdc1
/dev/hdd1
that will be slow
I've noticed that preformance has slowed a bit since the raid setup.
I also have both disks on the same controller.
Would it make a difference if
Thank ya Alvin for all the help. By what youi wrote the first time I was
not clear on wether or not you knew I did not have a hardware controller.
But the built in kernel raid is what I was talking about. Thanks for the
additional info it will help a lot.
Robert
Alvin Oga wrote:
hi ya
Is it possible with the newer kernels to actually boot to a software
raid?? I have a machine with 4 SCSI drives and I want to be able to RAID
1 the drives in pairs. One pair for the / and the second pair for /var
only. But everything I have read to date says you cannot do this.
TIA
Robert
hi ya
booting into raid1 or raid0 for / should be fine...
for scsi disks... you'd need to make sure the kernel
supports your controller... ( use initrd )
am assuming ( md0 ) / contains /boot and everything
needed for single user mode
if it was ide ...
/dev/md0 ==
Hi,
Thanks for the info. But my issue is that I do not have a RAID Controller.
I was looking at
using the raid features built into the kernes. I have been playing with 2.4.18
and raidtools2.
Thanks
Alvin Oga wrote:
hi yabooting into raid1 or raid0 for / should be fine...for scsi disks...
hi ya robert
am only referring to software raid ( raid features in the kernel as you
call it )...
lots of different software raid howto
-which one best suits you would depend on where you are
in the raid process
- convertng an existing system ( not too easy )
-
7 matches
Mail list logo
