Re: lm-sensors: can't access /proc file

On 04 Apr 2000 15:52:28 +0200, you wrote: * Marc == Marc Haber [EMAIL PROTECTED] writes: I was missing sensors and w83781d. On the P5A, it now works. However, the temperature values are grossly off, reporting a temp3 of 208.5 Centigrade... Same here. I think, temp3 is the connector for the

Re: lm-sensors: can't access /proc file

* Marc == Marc Haber [EMAIL PROTECTED] writes: I was missing sensors and w83781d. On the P5A, it now works. However, the temperature values are grossly off, reporting a temp3 of 208.5 Centigrade... Same here. I think, temp3 is the connector for the temperature sensor (TRPWR in the Manual).

Re: lm-sensors: can't access /proc file

On 01 Apr 2000 00:37:21 +0200, you wrote: Do you have the modules loaded? On my computer (with a p5a-board too), it was necessary to add the modules listed below to /etc/modules: i2c-proc i2c-ali15x3 i2c-dev w83781d sensors smbus i2c-core With this it works. I was missing sensors and w83781d.

Re: lm-sensors: can't access /proc file

* Marc == Marc Haber [EMAIL PROTECTED] writes: But, when I invoke sensors itself, it tells me that it couldn't access /proc file, and I don't have /proc/sensors. Also, the /dev/i2c nodes the docs mention seem to be missing. What am I doing wrong? Do you have the modules loaded? On my

lm-sensors: can't access /proc file

Hi! I am trying to get lm-sensors up and running on a system with Asus P5A mainboard, Debian potato and kernel 2.2.14. I am already using kernel-package and thus, I didn't need to recompile my kernel. I installed lm-sensors, libsensors0 and lm-sensors-source. I changed to my kernel top level