-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've been trying to get the svgalib driver working for the -vo option on
mplayer for some time now, but I haven't had any luck. It worked out of
the box for me when I ran 32-bit Debian, but I haven't had any such
luck lately.
My vide
Hi all,
I'm trying to setup svgalib (/etc/vga/libvga.config) on my old laptop.
Unfortunately viewing a picture with zgv shows a horzontally splitted
screen where the upper/lower part is shifted left/right.
My current settings are:
HorizSync 31.5 31.5
VertRefresh 60 60
chipset C&am
On Thu, Dec 20, 2001 at 12:02:09PM -0800, Peter Jay Salzman wrote:
> whenever an application uses svgalib, i get the error message:
>
> (application): relocation error:
> /usr/lib/libc5-compat/libvga.so.1: undefined symbol _xstat
Are you sure you don't want to have svgali
hi there,
whenever an application uses svgalib, i get the error message:
(application): relocation error:
/usr/lib/libc5-compat/libvga.so.1: undefined symbol _xstat
i checked google and debian-user archives -- one person posted the same
message awhile back, but no one replied to his
Aldo Maggi([EMAIL PROTECTED]) is reported to have said:
> my distro is woody - video card matrox mill g200 agp
> i am trying to utilize programs written for svgalib
> my problem is that when i run
> zgv -j photo.jpg
> i do not get any error but the photo does not show up and the s
my distro is woody - video card matrox mill g200 agp
i am trying to utilize programs written for svgalib
my problem is that when i run
zgv -j photo.jpg
i do not get any error but the photo does not show up and the screen remains
desolately black
i looked int zgv and libvga.conf manuals but could
Hi,
I am on debian unstable and after a recent dist-upgrade, all my console
utilities that use svgalib dont work. For instance zgv gives the following
error
zgv: relocation error: /usr/lib/libc5-compat/libvga.so.1: undefined symbol:
_xstat
I would be grateful if you could tell me how to fix
I have just installed zgv but when I start it I get a messy
flickering screen, I exit with ctrl-c and I see these messages:
Monitor setting from environment denied.
Color/mono text selection from environment denied.
svgalib applications otherwise work ok. so I am at a loss what
to look for
#include
[EMAIL PROTECTED] wrote on Mon Jul 30, 2001 um 02:57:20AM:
> Does anyone know what I need to do to configure my mouse to work in SVGAlib
> in Quake 2? I tried uncommenting "PS/2" and commenting out "mouse
> unconfigured" but still no luck. Any help would b
Does anyone know what I need to do to configure my mouse to work in SVGAlib
in Quake 2? I tried uncommenting "PS/2" and commenting out "mouse
unconfigured" but still no luck. Any help would be appreciated. Thanks.
-- Deven
Hey everyone
This morning I have been trying to get quake-svga running, and am getting this
error message:
SVGAlib wrapper: unable to open default visual
I have been looking around the list archives and the web but cannot find
any info on how to fix this error, anyone have any suggestions
hi,
I wrote an svgalib-program which gives me segmentation faults
(SIGSEGV) or makes the whole system halt.
The svgalib man-page mentions two debugging solutions:
1. textmode < /dev/ttyX
2. execute vga_flip in the debugger
but I have no program called textmode (can I write this ?)
and w
> Hi folks,
>
> Some of you perhaps read the thread about my svgalib screen sync problems
> with the DSTN 640x480 screen of my laptop and ct65535 chipset.
> One of the problems I could solve:
> My console isn't scrumbled any more when I switch back from graphics to
> te
Hi folks,
Some of you perhaps read the thread about my svgalib screen sync problems
with the DSTN 640x480 screen of my laptop and ct65535 chipset.
One of the problems I could solve:
My console isn't scrumbled any more when I switch back from graphics to
textmode, I achieved this by
a LCD/CRT/LCD switch. This could perhaps be restored with the
> TextClockFreq option but havn't tried yet.
> As in the last time, I only started X to look at my typeset
> TeX-documents with xdvi, and this is a bit of a overhead (8 Meg RAM
> machine), I decided to purge X and install SVGAl
with the
TextClockFreq option but havn't tried yet.
As in the last time, I only started X to look at my typeset
TeX-documents with xdvi, and this is a bit of a overhead (8 Meg RAM
machine), I decided to purge X and install SVGAlib. Now the strange thing:
If I display GNUplot plots, the switch to graph
On Wed, Mar 01, 2000 at 09:59:40PM +, José Luis Gómez Dans generated a
stream of 1s and 0s:
> Hi!
> I have so far been experiencing erratic svgalib behaviour.
> Basically, if I call something like zgv, I get the following message:
> c172d
> Int 0x10 is not in rom (:
Hi!
I have so far been experiencing erratic svgalib behaviour.
Basically, if I call something like zgv, I get the following message:
c172d
Int 0x10 is not in rom (:)
No VESA bios detected!
Try running vga_reset.
and zgv (or whatever) runs in VGA mode, instead of SVGA mode
When I installed svgalib some time ago I didn't manage to get the
mouse to work (i.e. nothing happens when I move the mouse). This
didn't bother me much until I found out about the svga-mode of xaos
(which is really cool!).
I have a Logitech MouseMan (PS/2) and the relevant
Carlos writes:
> How can I adjust the time between a call and another when using the
> persist option with pppd?
Yes. The line
holdoff 100
in /etc/ppp/peers/provider will tell pppd to wait 100 seconds before
retrying the 'provider' connection.
--
John Hasler
[EMAIL PROTECTED]
Dancing H
Hello people.
I am coming now to ask your help with stuff I think it's easy, but I
just couldn't set.
- How can I adjust the time between a call and another when using the
persist option with pppd?
- Is there any way I can get the third button of a serial,
microsoft-type of mouse? (it won't sw
[warning, mail is long and has >80 chars]
Hello,
I've a 264GT-IIc (3D Rage IIc) graphics card (Output also from
SuperProbe), works great under X, but segfaults every time
when using svgalib. allready the first call, vga_init crashes.
I've allready tried all available chi
Daniel Ruoso wrote:
>
> Does anybody know where can I find a good FAQ about SVGALIB, or (that
> would be better) can explain me, how to run svgalib as a normal user?
My understanding is that svgalib must run with root privileges. More
info: http://siva.usc.edu/~brion/linux/svgalib-
Does anybody know where can I find a good FAQ about SVGALIB, or (that
would be better) can explain me, how to run svgalib as a normal user?
thanks
ruoso
d I'm using the X server and OpenGL lib from
> nVidia. Everything's fine in X, but SVGAlib has problems. I upgraded to
> SVGAlib 1.3.1 from unstable, but still there are issues.
>
> I sometimes run zgv and Maelstrom, but the main reason I want SVGAlib is
> to
On Sat, 12 Jun 1999, Frank Barknecht wrote:
> Raymond A. Ingles hat gesagt: // Raymond A. Ingles wrote:
> > I sometimes run zgv and Maelstrom, but the main reason I want SVGAlib is
> > to try to run GLQuake. The Quake-HOWTO says I need SVGAlib to get there.
[...]
As I menti
Raymond A. Ingles hat gesagt: // Raymond A. Ingles wrote:
>
> I've got a Riva TNT card, and I'm using the X server and OpenGL lib from
> nVidia. Everything's fine in X, but SVGAlib has problems. I upgraded to
> SVGAlib 1.3.1 from unstable, but still there are issues
uncommenting the "VesaText" option lets me use SVGAlib programs, and
still have a usable text mode when I exit them.
Unfortunately, this doesn't completely solve my GLQuake-on-TNT problem.
Now squake works just fine, but glquake insists on having the glide
library.
My understand
> If I force VGA-only, everything's fine, but the >resolutions and
colors
>are, um, limited. If I force NV3 (Riva) mode, I get a >blank screen.
It
>still responds to keypresses and I can telnet in, but >until I
>CNTRL-ALT-DEL the screen is hosed.
This sounds familiar, the same thing happens to m
I've got a Riva TNT card, and I'm using the X server and OpenGL lib from
nVidia. Everything's fine in X, but SVGAlib has problems. I upgraded to
SVGAlib 1.3.1 from unstable, but still there are issues.
I sometimes run zgv and Maelstrom, but the main reason I want SVGAlib i
Hello again,
Having (now) worked out the basics of svgalib and being about to embark on a
fairly substantial graphics project I wonder what peoples opinions are
regarding svgalib vs. GGI ?
Is svgalib dead and GGI "the way of the future" ?
What is the state of svgalib development now
Sorry for replying to my own post - this is to let everyone know that the
problem has been solved.
It seems that /dev/ttyS0 has permissions set for group dialout of which I
(Ivan) was not a member. When I added myself to the group and followed Joey
Hesse's suggestions from the bug mailing list
Hello,
I'm having trouble in two areas whilst trying to learn to programme the mouse
under svgalib.
1. The programme that comes with the source mousetest.c once compiled will run
correctly for root but not for me (ivan). The error is "svgalib: Failed to
initialise mouse."
Th
an s3v to a matroix Millenum 8m so this might
be the new card not working with svgalib. Anyway the screen went dark
(still video as the monitor power light was still green) and no amount
of Fn or ing would get another screen. I could still
telnet in from my windows box, but killing doom didn
Has anyone else had this problem?--
I upgraded to slink and compiled kernel 2.2.3 this weekend, no problems.
Then, as root--it's a standalone box--I fired up quake2. The screen
went blank and--first time I've seen this since escaping from MS--the
keyboard went dead. Completely. Even numlock/ca
Ooops! Was a little fast on the keyboard there. Here's my
libvga.config for real:
libvga.config
Description: Binary data
Are there any other TNT users out there who've got it working?
--
-~* Daniel Elenius *~-
So far in my ~6 months of Linux experience, nothing have so completely
eluded me as svgalib. I've never gotten it to work at all. There was a
time when it crashed my graphics completely, but now it won't even do
that. I compiled version 1.4.0 and the demo programs that go with
it. Mo
ivan wrote:
>
> I have now decided to use svgalib but already have run into trouble !
>
I think you may need the svgalibg1-dev package. The *-dev packages seem
to contain the header files and the static libraries required to
complile your own programs. Note this packages depends on
In foo.debian-user, you wrote:
> I have now decided to use svgalib but already have run into trouble !
>
> /* programme svgatest.c */
>
> #include
> #include "vga.h"
>
> main()
> {
>
> /* code */
>
> }
>
> #: gcc svgatest.c -O2 -lvg
I have now decided to use svgalib but already have run into trouble !
/* programme svgatest.c */
#include
#include "vga.h"
main()
{
/* code */
}
#: gcc svgatest.c -O2 -lvga
Programme won't compile because
a) Can't find vga.h
b) Can't find vga li
On Sun, 17 Jan 1999, Joey Hess wrote:
> Open will do it. Use "open -s -w program", it will switch to a VT, run the
> program, wait for it to finish, and switch back.
That's exactly what I was looking for!
Thanks Joey,
Brandon
+--- ---
Brandon Mitchell wrote:
> It works as root. But I need a bit more than chvt, and I know I've seen a
> program/script that does it about a year or more ago. The "more" that I
> need is the ability to do this as a user, run a specified program, and
> switch back to X when the program is done. I wa
On Sun, 17 Jan 1999, Rob Mahurin wrote:
> On Sun, Jan 17, 1999 at 05:54:41PM -0500, Brandon Mitchell wrote:
> > > There is a little program called switchvt... I hardly remember, but I
> > > think
> > > it was just a single C file.
> >
> > That's about all I remember, too. (Although I was tryin
On Sun, Jan 17, 1999 at 05:54:41PM -0500, Brandon Mitchell wrote:
> > There is a little program called switchvt... I hardly remember, but I think
> > it was just a single C file.
>
> That's about all I remember, too. (Although I was trying runvt, loadvt,
> launchvt.) Anyone have ideas on where
On Sun, 17 Jan 1999, Tino Schwarze wrote:
> > I want to start qwcl (quake world) from xqf (an X game finder). I
> > remember something that would change the current vt (via chvt maybe) and
> > then run your non-X program, followed by a change back to X. Does anyone
> > know of such a program/scr
Hi Brandon,
> I want to start qwcl (quake world) from xqf (an X game finder). I
> remember something that would change the current vt (via chvt maybe) and
> then run your non-X program, followed by a change back to X. Does anyone
> know of such a program/script?
There is a little program called s
I want to start qwcl (quake world) from xqf (an X game finder). I
remember something that would change the current vt (via chvt maybe) and
then run your non-X program, followed by a change back to X. Does anyone
know of such a program/script?
Thanks,
Brandon
+---
Hello again :)
I am using a S3 Virge DX (375) and SVGALib. I have removed the # in
front of the line "chipset s3" in /etc/vga/vgalib.config but SVGALib
can't ID my s3 card, so it forces VGA. Is there any thing I can do to
fix that?
ted frequently and you want to keep the +s
>
Strange, SVGALIB also locked my system. Sound and video worked for a few
moments and then at a random ,short time, after it started my machine
would just lock Is there some problem with [s,x]quake and the S3
chipset? I'm running 2.0.34.
Panz
hi
Ship's Log, Lt. Michael Beattie, Stardate 071298.1206:
> A `chmod +s /usr/games/squake.real` will fix it.
you should also consider running suidregister from the package suidmanager as
squacke is worth being updated frequently and you want to keep the +s
Greetings
--
Alexander N. Benner -
On Mon, 7 Dec 1998, Michael Beattie wrote:
> The binary, /usr/games/squake.real has to be setuid root to use svgalib.
> I't is not packaged as such because it is a security hole.
> A `chmod +s /usr/games/squake.real` will fix it.
Doh, Michael is right, it's squake.real, not
On Sun, 6 Dec 1998, Mark Panzer wrote:
> Well, I tried to use xquake but my system locked up 3 times after about
> two seconds of use. I then decided to try out squake however when I run
> squake I recieve the error:
>
> svgalib: Cannot get I/O permissions.
>
> I checked t
As root: chmod u+s /usr/games/squake
It needs root to use svgalib, and permissions are then dropped to play
quake.
On Sun, 6 Dec 1998, Mark Panzer wrote:
> Well, I tried to use xquake but my system locked up 3 times after about
> two seconds of use. I then decided to try out squake howeve
Well, I tried to use xquake but my system locked up 3 times after about
two seconds of use. I then decided to try out squake however when I run
squake I recieve the error:
svgalib: Cannot get I/O permissions.
I checked the permissions on the lib files and changed them so group and
user could
Hello all,
I want to use zgv with svgalib, which works, but the hi-res modes
do not (I get 640x480, I think).
As far as I know, my video card (et6000, 4Mb) is downward compatible
with
et4000 which has good (?) support in svgalib. I however cannot gather
from the docs how to change modes. the F
M.C. Vernon wrote:
> Dear all,
>
> Does svgalibwork with such cards? Mine is an ATIXpert98
>
> Thanks,
>
> Matthew
>
I couldn't get my Xpression+ TV2PC card to work with the Mach64
chipset defined, but it worked just fine if I defined the chipset
as VESA (up to 800x600).
-Mitch
Dear all,
Does svgalibwork with such cards? Mine is an ATIXpert98
Thanks,
Matthew
--
Elen sila lumenn' omentielvo
Steward of the Cambridge Tolkien Society
Selwyn College Computer Support
http://www.geocities.com/Area51/Chamber/8841/
http://www.cam.ac.uk/CambUniv/Societies/tolkien/
Has anyone ever gotten better than 320x200 with the above setup?
As far as I can tell there is no native driver for this card. Is Matrox
still withholding specs on their cards? I'm running the latest Debian
packages of svgalib from slink.
Hello all,
I was wondering if there is a way to specifically tell SVGALib how
much Video RAM your card has, instead of relying on the autodetect. I
have 8MB of SGRAM on my card (Diamond Viper V330 PCI, RIVA128), but when
I start programs that use SVGALib, quake2 for instance, they only
On Mon, Sep 21, 1998 at 05:57:26PM -0500, Ryan Kirkpatrick wrote:
> On Sun, 20 Sep 1998, Adrian Bridgett wrote:
>
> > Matrox Millenium isn't particularly well supported by SVGAlib at the moment.
> > I have an improved patch here, but I'm a bit wary of some trimmed se
On Sun, 20 Sep 1998, Adrian Bridgett wrote:
> Matrox Millenium isn't particularly well supported by SVGAlib at the moment.
> I have an improved patch here, but I'm a bit wary of some trimmed security
> patches which are in the upstream release - the fewer patches we apply th
On Sun, Sep 20, 1998 at 10:12:55PM +, Ruud de Bruin wrote:
> When running "gs" as user, I receive the following error message:
>
> SVGALIB -- Cannot get I/O permissions.
>
> How can I solve this?
You have to set the suid bit (It's a security hole, your user co
When running "gs" as user, I receive the following error message:
SVGALIB -- Cannot get I/O permissions.
How can I solve this?
Regards, Ruud.
problem with squake on my Debian 2.0
> system as well, only I have a Matrox Millium(sp?) card. 'ldd `which
> squake.real`' gives me:
Matrox Millenium isn't particularly well supported by SVGAlib at the moment.
I have an improved patch here, but I'm a bit wary of some trimme
On Thu, 17 Sep 1998, Adrian Bridgett wrote:
> > >Does "ldd squake.real" say anything useful?
> >
> > Er, que? (spot the newbie sysadmin...)
>
> Which seems okay to me - the top one is the libc5 maths library, the bottom
> one is the libc5 C library and the middle one is the libc5 vga library.
e of days (windows, grr...) I'll try that and let you
> know. The reason for asking is that the docs that came with SVGALib
> suggested that the Mach64 drivers are a bit dodgy anyway...
>
> >Does "ldd squake.real" say anything useful?
>
> Er, que? (spot the
to the video card (OTOH
plain
>vga probably wouldn't work either).
I can't honestly remember - I've not been using the Linux side of my box
in the last couple of days (windows, grr...) I'll try that and let you
know. The reason for asking is that the docs that came with
On Tue, Sep 15, 1998 at 08:54:22AM -0700, Chris Whitworth wrote:
> It doesn't work basically!
>
> It seems that the Mach64 libvga drivers as supplied on the Debian 2.0
> CD-Rom don't actually work (it crashes out with a segmentation fault
> when it attempts to initialise the display)
>
> If I s
It doesn't work basically!
It seems that the Mach64 libvga drivers as supplied on the Debian 2.0
CD-Rom don't actually work (it crashes out with a segmentation fault
when it attempts to initialise the display)
If I select the default VGA drivers, then I can get some stuff to work,
but certain
"Richard E. Hawkins Esq." <[EMAIL PROTECTED]> writes:
> Hmm, i installed it a month or so ago, and I could get it working.
> I installed today, after reinstalling the system a couple of weeks
> ago, and I can't get it working.
[...]
> Has something changed?
Yes; apple2 use to _incorrectly_ defa
Hmm, i installed it a month or so ago, and I could get it working. I
installed today, after reinstalling the system a couple of weeks ago, and I
can't get it working.
eyryttyp2:hawk>apple2
svgalib: Cannot get I/O permissions.
and
eyryttyp2:hawk>apple2 -vga
Warning: Forcing to s
Ignacio Ms Ivars wrote:
> I have two problems I think I know the solution but I don't know how to
> apply it. First is the eternal problem of the dead keys under X11. I had
> it solved using Thomas Quinnot modified libX11.so.6.1, but as I have
> upgraded to hamm and to X11R6 3.3.2 it doesn'
rk anymore. I have
tried to reinstall the modified library, but, as it is from version
3.3.1, it doesn't work. Anyone knows if there is any solution for
version 3.3.2? I need my spanish accents!!! :-)
The second problem is about the I/O permissions in svgalib. I have
given suid bits to L
In article <[EMAIL PROTECTED]>, Adrian Bridgett
<[EMAIL PROTECTED]> writes
>I would suggest removing the dummy package (you want to run it under svgalib
>since you have got lincity-svga, if you want to run under x-windows you will
>want lincity-x instead/as well).
I forgo
On Tue, May 19, 1998 at 03:09:19PM +0100, Ian Lynagh wrote:
>
> Hi all
>
> I d/led Hamms Lincity, Lincity-svga and the SVGAlib dummy. However,
> after typing 5 for mouse (PS2 - I do not have gpm if that makes
> a difference) it just stopped. I then tried removing the s
Hi all
I d/led Hamms Lincity, Lincity-svga and the SVGAlib dummy. However,
after typing 5 for mouse (PS2 - I do not have gpm if that makes
a difference) it just stopped. I then tried removing the svgalib dummy
and installing svgalibg1, but this time it stopped at a screen with
green and blue
Florian Attenberger <[EMAIL PROTECTED]> on Sun, Mar 29, 1998 at 08:01:58PM
+0200:
> X11 Version 3.2.2:Segmentation fault
> SVGAlib:Segmentation fault
> SVGATextMode:Dont know (Display crashes totally :- )
> XF86Setup: Same as SVGATextMode
>
> My kernel was compiled with gcc 2.8.1 from the deb
Hi,
I have the latest (very unstable) hamm,frozen,slink - mix installed on my
System.
During theses updates suddenly all Graphical-Systems didn't work any more.
X11 Version 3.2.2:Segmentation fault
SVGAlib:Segmentation fault
SVGATextMode:Dont know (Display crashes totally :- )
XF86Setup: Same
SVGALib doesn't natively recognize my Matrox card and because of this ... I
can't get the full performace out of SVGALib when playing games like Quake,
Quake2, etc ...
Is there a new version of SVGALib I can get ... or ... does someone have a
configuration file we can use to control
> > > Note that you definitely should try to write the mode line manually,
> > > because
> > > you want to use the highest refresh rate possible with your monitor and
> > > video card.
> >
> > My First problem is that I have an ET4000, and it
> On Mon, Jan 31, 1994 at 02:20:19PM +1300, Michael Beattie wrote:
H
> > Hi,
> >
> > After studying the docs for svgalib (to get a working 320x200x256 mode) I
> > have discovered a script with svgatextmode to get the vga registers and
> > create
On Mon, Jan 31, 1994 at 02:20:19PM +1300, Michael Beattie wrote:
> Hi,
>
> After studying the docs for svgalib (to get a working 320x200x256 mode) I
> have discovered a script with svgatextmode to get the vga registers and
> create a mode for the libvga.et4000 file. Unfortunately
Hi,
After studying the docs for svgalib (to get a working 320x200x256 mode) I
have discovered a script with svgatextmode to get the vga registers and
create a mode for the libvga.et4000 file. Unfortunately, it requires a
program by the name of "getVGAregs" which I cannot find. any s
debianized computer w/ quake), is it my memory (32 Megs, already
changed it, tried with mem=8M), my motherboard (tried with/out external
cache) or finally my CPU (tried with/out the internal cache). Or maybe
it's the version of the svgalib? :-?
TIA!
Salutacions, Pere __o
Olivier THARAN wrote:
> On Sat, Nov 29, 1997 at 12:49:32AM -0500, Paul Miller wrote:
> > This happens when a regular user runs a graphics program out of X - such
> > as squake... How can I fix this?
> >
> > svgalib: Cannot get I/O permissions.
>
> You need
On Sat, Nov 29, 1997 at 12:49:32AM -0500, Paul Miller wrote:
> This happens when a regular user runs a graphics program out of X - such
> as squake... How can I fix this?
>
> svgalib: Cannot get I/O permissions.
You need to make your program setuid root (because svgalib wants a
This happens when a regular user runs a graphics program out of X - such
as squake... How can I fix this?
svgalib: Cannot get I/O permissions.
Thanks
---
Paul Miller <[EMAIL PROTECTED]>, finger for public PGP key
100 MB web space for $10/month, http://www.3dillusion.com
--
TO UNSUB
HT 13177 Oct 10 15:06 fun
This is a file with suid turned on but it is owned by you; in other words,
whenever it runs, whoever runs it, it is run as if it were run by you.
>> abapc $ ./fun
>> svgalib: Cannot open /dev/console.
>
>Hmm, why doesn't thi
Hi, I am having some problems trying to run the demo programs from
the svgalib1-dev package. After the compile I try to run the 'fun'
program, here is the error I get:
> abapc# ls -al fun
> -rwsr-xr-x 1 jsg HT 13177 Oct 10 15:06 fun
> abapc $ ./fun
> svg
Andrew Keen <[EMAIL PROTECTED]> writes:
> My question, my only problem, the fly in the ointment of Linux, the
> "black fly in my Chardonnay" is that when I want to run a svgalib
> program (X works) at the console it doesn't recognize it and then
> -screws- i
n my Chardonnay" is that when I want to run a svgalib
program (X works) at the console it doesn't recognize it and then
-screws- it up.. basically, it runs, but it doesn't recognize my Virge
chip.
As I've looked through DejaNews for the solution to my problem, I've
been un
Hi,
does anyone knows how to configure svgalib with ATI Mach64 Rage II?
I tried using vga mode but is is not working too, all I get is a blank screen.
Thanks for any help.
Luka
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble?
;>> your hardware, for ex. switching SIMMs or pulling them out one at a time
>>> and see
>>> if it segfaults again.
>>
>> I'm almost certain that the hardware is fine. Every single other program
>> has zero trouble with it and there are even some
On Fri, 30 May 1997, Klaus Ethgen wrote:
> problem: If I start the game squake as user, I get the message:
>
> svgalib: Cannot open /dev/console.
> Exit -1
>
> If I start this game as root then everythink is ok. But I don't like to
> start any game as root. Also
Hi!
I use the debian-linux distribution for some month. Now I have a small
problem: If I start the game squake as user, I get the message:
svgalib: Cannot open /dev/console.
Exit -1
If I start this game as root then everythink is ok. But I don't like to
start any game as root. Also few
As you say, since gs, et al. all work for other people it's not likely to
be buggy app software.
> your hardware, for ex. switching SIMMs or pulling them out one at a time and
> see
> if it segfaults again.
I'm almost certain that the hardware is fine. Every single other progr
I've sent a message to this list about this before but received no reply.
I'm trying again.
Everytime I attempt to run some utilities (gs4.03, tmview, etc.) I get a
segfault with signal 11. I have no idea what this means and I'm
completely confused because some other utilities (zgv and lockvc)
Every time I attempt to run a program that uses the SVGA lib it dies with
a segfault 11. I'm running Debain 1.3, kernel 2.0.30, with the latest
SVGA lib off the Debian ftp site, on a Cirrus Logic GLD5420 (or something
close to that, it's old anyway) with 512k ram. Any clues welcome,
Thanks in a
Hello,
I installed the tmview_96.05-1.deb package which I got from
bo/binary/tex some days ago.
At home it works fine at home but in the university
it produces only a very strange vertical pattern.
There aren't any error messages.
The demos of svgalib work well.
Does anybody have a
joost witteveen wrote:
>> Would:
>> dpkg --force-depends --purge svgalib1
>> dpkg --install svgalib-dummy1_1.2.10.deb
>> be the right thing to do?
>I just tried it (I needed a "dpkg -r svgalib1-dev" in between, BTW),
>and it worked OK. (and, gs 3.33 st
1 - 100 of 118 matches
Mail list logo
