Easiest way to do this is to mount your drives by labels instead of
device-names. Search the list for entries by Bob McGowan with the
keyword label and you'll find out anything you need to know.
Cheers, Roman.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Hi,
Does anybody happens to know what might cause this,
which is what I get when booting my USB disk via grub?
Kernel panic - not syncing: VFS: Unable to mount root
fs on unknown-block(0,0)
I searched for the answer, but seems most of them
suggested bad disk, eg,
http://www.mail-archive.com
On Fri, Feb 02, 2007 at 10:14:13AM -0800, Tong Sun wrote:
Hi,
Does anybody happens to know what might cause this,
which is what I get when booting my USB disk via grub?
Kernel panic - not syncing: VFS: Unable to mount root
fs on unknown-block(0,0)
I searched for the answer, but seems
Jeudi 2 novembre 2006, 17:30:45 CET, air a écrit :
[...]
J'ai essayé de mettre en premier lieu les options en dur mais
toujours le message d'erreur. Ensuite en mettant l'option --initrd le
message à disparu. Je ne comprends pas pouquoi cela n'a pas marché
sans l'option --initrd car en dur
root fs on unknown-block(0,0)Ma config est la suivante:
-Pentium 3800EB
-Carte mère Asus Cusl2-C chipset Intel 815E
-Carte graphique Nvidia geforce 2 gts
-Disque Dur Maxtor 160 Go Ultra DMA 133
Voici les options que jai sélectionné dans
ATA/ATAPI/MFM/RLL support
-Enhanced IDE/MFM/RLL disk
append a correct root= boot option
kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[...]
Tu n'as pas compilé en dur les modules pour ton chipset IDE.
Donc, soit tu mets * à la place de M, soit tu fais un initrd
(option --initrd de make-kpkg).
[pas de HTML, merci
(2.6.18.1) mais lorsque je reboot mon pc je tombe sur ce message
derreur :
VFS: Cannot open root device hda1 or unknown-block(0,0)
Please append a correct root= boot option
kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[...]
Tu n'as pas compilé en dur les
Bonjour,
J'ai eu le problème il n'y a pas longtemps.
En ce qui me concerne, il s'agissait du fait que j'utilisai uniquement
le nouveau pilote aic7xxx et qu'il fallait aussi l'ancienne version
(j'utilise des disques scsi).
As-tu des disques SATA ?
Patrice.
Jean-Luc Coulon (f5ibh) a écrit :
Le
Le 20.07.2005 08:52:05, Patrice OLIVER a écrit :
Bonjour,
J'ai eu le problème il n'y a pas longtemps.
En ce qui me concerne, il s'agissait du fait que j'utilisai uniquement
le nouveau pilote aic7xxx et qu'il fallait aussi l'ancienne version
(j'utilise des disques scsi).
As-tu des disques SATA ?
root= boot option
kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
J'ai cherché un peu sur internet mais n'ai trouvé que des cas où le pb
venait d'un initrd pas généré, ce qui ne s'applique pas dans mon cas
puisque c'est un noyau sans initrd.
Voici ma
message semble concerner le File System (à moins que je fasse
complètement fausse route avec VFS) ?
Le message d'erreur exact était :
VFS: Cannot open root device hda1 or unknown-block(0,0)
Please append a correct root= boot option
kernel panic - not syncing: VFS: Unable to mount root fs on
unknown
to mount root fs on
unknown-block(0,0)
Le VFS est le Virtual FileSystem, soit le système de fichiers virtuels
du noyau qui s'occupe de fournir un accès uniforme à tous les fichiers
du système (qu'ils soient virtuels comme des périphériques ou des
fichiers de /proc ou encore accédés par le réseau via
Florent Bayle wrote:
Le Mardi 19 Juillet 2005 18:02, RTyler a écrit :
Pour autant que je me souvienne, il faut une version de udev assez récente
pour le noyau 2.6.12, en tout cas plus récente que celle disponible dans
sarge ou testing (je ne sais pas pour unstable). Peut-être que le
fs on
unknown-block(0,0)
J'ai cherché un peu sur internet mais n'ai trouvé que des cas où le pb
venait d'un initrd pas généré, ce qui ne s'applique pas dans mon cas
puisque c'est un noyau sans initrd.
Voici ma configuration sur grub :
root(hd0,0)
kernel/boot/vmlinuz-2.6.12.3 root
: Unable to mount root fs on
unknown-block(0,0)
Si vous n'avez pas fait d'initrd, êtes vous sûr que tout ce qui est
nécessaire au boot a été codé en dure dnas le noyau ?
Je pense à l'ide, à ext2/ext3 ...
J'ai cherché un peu sur internet mais n'ai trouvé que des cas où le
pb venait d'un
= boot option
kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
J'ai cherché un peu sur internet mais n'ai trouvé que des cas où le pb
venait d'un initrd pas généré, ce qui ne s'applique pas dans mon cas
puisque c'est un noyau sans initrd.
Voici ma
a correct root= boot option
kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
J'ai cherché un peu sur internet mais n'ai trouvé que des cas où le pb
venait d'un initrd pas généré, ce qui ne s'applique pas dans mon cas
puisque c'est un noyau sans initrd.
Voici ma
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 19.07.2005 19:52:05, RTyler a écrit :
Frédéric Bothamy a écrit :
* RTyler [EMAIL PROTECTED] [2005-07-19 18:02] :
[ .. ]
noyau que tu as sélectionnée. Je pencherais a priori pour des options
manquantes dans la configuration du noyau.
J'ai
* RTyler [EMAIL PROTECTED] [2005-07-19 20:03] :
RTyler a écrit :
[SNIP]
Pour le reste je vous file mon .config (si jamais vous arrivez à vous y
Pour le coup j'ai oublié de l'envoyer.
SNIP]
RTyler
P.S. : Bonne nuit à tous
Quelques commentaires sur le fichier :
[...]
#
#
Frédéric Bothamy a écrit :
* RTyler [EMAIL PROTECTED] [2005-07-19 20:03] :
RTyler a écrit :
[SNIP]
Pour le reste je vous file mon .config (si jamais vous arrivez à vous y
Pour le coup j'ai oublié de l'envoyer.
SNIP]
RTyler
P.S. : Bonne nuit à tous
Quelques commentaires sur le
but in the
boot process i get this:
Kernel Panic: VFS: Unable to mount root fs on unknown-block(0,0)
Did you include support for your ide/scsi controller IN the kernel, too?
--
Rob Weir [EMAIL PROTECTED] | [EMAIL PROTECTED] | Do I look like I want a CC?
Words of the day: corporate
Boot
My new kernel is compiled with ext2, ext3 and the others also.
My filesystem is ext3.
When i reboot my system i can choose to boot the debian2.6.5 but in the
boot process i get this:
Kernel Panic: VFS: Unable to mount root fs on unknown-block(0,0)
How can i fix it so that i can boot with my
=/dev/hda3 ro
Savedefault
Boot
My new kernel is compiled with ext2, ext3 and the others also.
My filesystem is ext3.
When i reboot my system i can choose to boot the debian2.6.5 but in the
boot process i get this:
Kernel Panic: VFS: Unable to mount root fs on unknown-block(0,0)
How can i fix it so
On Mon, 19 Apr 2004 00:07:59 -0400, Allan Wind wrote:
On 2004-04-18T23:16:38-0400, Adam Kessel wrote:
- I get the following kernel panic when trying to boot:
Unable to mount root foreseeability on unknown-block(0,0)
I believe this means that the kernel could not read the root file
A couple of questions with respect to the Debian 2.6.5 kernel:
- Why is there no longer an AMD K6 Debian kernel? It appears that only a
K7 kernel is now built, which won't boot on my K6.
- I get the following kernel panic when trying to boot:
Unable to mount root fs on unknown-block(0,0
On 2004-04-18T23:16:38-0400, Adam Kessel wrote:
- I get the following kernel panic when trying to boot:
Unable to mount root fs on unknown-block(0,0)
I believe this means that the kernel could not read the root file
system. What file system are you using? I am quite sure that I got
26 matches
Mail list logo