>How do you white list an IP in Hijack?
"If you need to allow E-mail from a specific IP address, you can add a line
"ALLOWIP 127.0.0.1" to the \IMail\Declude\hijack.cfg file (replacing
127.0.0.1 with the IP address you wish to allow). The ALLOWIP will allow
that IP address to send unlimited E
How do you white list an IP in Hijack?
John Tolmachoff
IT Manager, Network Engineer
RelianceSoft, Inc.
Fullerton, CA 92835
www.reliancesoft.com
---
[This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)]
---
This E-mail came from the Declude.JunkMail mailing list. To
>Does this BLACKLIST need an entry to both glogal.cfg & the junk_mail
>configuration file?
It works like all the other tests, so it needs to be defined in the
global.cfg file, and then you can set the action to use on the test in the
global.cfg file (for outgoing/relayed mail), or the $default
Does this BLACKLIST need an entry to both glogal.cfg & the junk_mail
configuration file?
Thanks.
- Original Message -
From: "R. Scott Perry" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 20, 2002 11:10 AM
Subject: Re: [Declude.JunkMail] Newbie Question
>
> >Being
>So if you want all mail to "@example.com" (a domain that IMail acts as a
>gateway for, that goes to another local mailserver) to be HELD, for
>example, you would use the HOLD action in the
>\IMail\declude\example.com\$default$.JunkMail file.
>-Scott
I figured it o
>Being that I am very new to Declude Junkmail what are the steps in order
>to configure a kill list. I have a kill list so what are the steps in
>order to activate it.
"Kill List" normally refers to IMail's "kill.lst" file (although some
people also use it to refer to Declude JunkMail's "Send
>I am little confused I want to control the outgoing mail via the
>per-domain settings. I have the per-domain settings for this domain setup
>(see below):
>If I change the OUTGOING actions in the global.cfg, then how can I have
>different actions for the per-domain configuration.
What is it
OK. I'm just using the KillListGen program that was posted to update my
kill list. So those are the ones I'm looking at. There are only about 5
extra ones that I have added.
John Olden
Systems Administrator - Champaign Park District
- Original Message -
From: "R. Scott Perry" <[EMAIL PR
I am little confused I want to control the outgoing mail via the
per-domain settings. I have the per-domain settings for this domain setup
(see below):
ORDBWARN
OSDUL WARN
OSFORM WARN
OSLIST WARN
OSRELAY WARN
OSSMART WARN
OSSOFT
Being that I am very new to Declude Junkmail what are the steps in
order to configure a kill list. I have a kill list so what are the steps in
order to activate it.
Thanks
>Wait, that doesn't seem right now that I look at the other addresses in
>the Imail Kill.lst.
>All of them either have .domain.com or @domain.com
>I'll add the one you suggested but
The IMail help shows that either "@example.com" or "[EMAIL PROTECTED]" are
the only acceptable formats. Th
Wait, that doesn't seem right now that I look at the other addresses in
the Imail Kill.lst.
All of them either have .domain.com or @domain.com
I'll add the one you suggested but
John Olden
Systems Administrator - Champaign Park District
- Original Message -
From: "R. Scott Perry" <[
>I have a situation here and I am not sure if Declude can does this. We have
>an Imail server with Declude on it and we want to pass several other domains
>through it since these companies host their own email servers. Delcude is
>running the the tests on the emails and marking the headers correc
Hmm. I wasn't aware of that. Thanks Scott.
John Olden
Systems Administrator - Champaign Park District
- Original Message -
From: "R. Scott Perry" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 20, 2002 9:08 AM
Subject: Re: [Declude.JunkMail] Kill List
>
> >I have .
Hello,
I have a situation here and I am not sure if Declude can does this. We have
an Imail server with Declude on it and we want to pass several other domains
through it since these companies host their own email servers. Delcude is
running the the tests on the emails and marking the headers cor
>I have .weatherbug.com and @weatherbug.com in my kill.list.
Your IMail kill.lst? If so, I think that the IMail kill.lst doesn't
support the ".weatherbug.com" format, and you have to specify the entire
"@smailer1.weatherbug.com".
-Scott
---
[This E-mail was s
I have .weatherbug.com and @weatherbug.com in my kill.list. But somehow
these messages are still coming in and getting held by failing the
Declude weight 15 setting I have?
Should I be blocking aws.com or is there something I'm missing here? No
weatherbug is not in my whitelist.
Thanks,
John Olde
I would not recommend that anyone ever whitelist FROM addresses. Much
better to use a negative weight in a filter list where you at least have a
chance to still block potential spam attempts from these addresses.
Bill
-Original Message-
From: Tom [mailto:[EMAIL PROTECTED]]
Sent: Thursda
18 matches
Mail list logo
