Hi Thomas,
On 03/30/2018 03:47 PM, Thomas Monjalon wrote:
There are some discussions about a specific part of the offload API:
"To enable per-port offload, the offload should be set on both
device configuration and queue setup."
It means the application must repeat the port offl
On Sun, Apr 01, 2018 at 05:19:22PM -0400, Qi Zhang wrote:
> Add new actions that be used to modify packet content with
> generic semantic:
>
> RTE_FLOW_ACTION_TYPE_FIELD_UPDATE:
> - update specific field of packet
> RTE_FLWO_ACTION_TYPE_FIELD_INCREMENT:
> - increament specific field of
On 03/29/2018 06:05 PM, Chas Williams wrote:
From: Jan Blunck
This lets the vhost driver handle the VLAN header like the virtio driver
in software.
Signed-off-by: Jan Blunck
---
drivers/net/vhost/rte_eth_vhost.c | 35 ++-
1 file changed, 34 insertions(+),
Signed-off-by: Xiao Wang
Reviewed-by: Maxime Coquelin
Reviewed-by: Ferruh Yigit
---
doc/guides/nics/features/ifcvf.ini | 8 +++
doc/guides/nics/ifcvf.rst | 98 ++
doc/guides/nics/index.rst | 1 +
doc/guides/rel_notes/release_18_05.
Currently eal vfio framework binds vfio group fd to the default
container fd during rte_vfio_setup_device, while in some cases,
e.g. vDPA (vhost data path acceleration), we want to put vfio group
to a separate container and program IOMMU via this container.
This patch adds some APIs to support con
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends
IFCVF driver
The IFCVF vDPA (vhost data path acceleration) driver provides support for the
Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible, it
works as a HW vhost backend which can send/receive packets to/from virtio
directly by DMA. Besides, it supports dirty pa
On 4/12/2018 1:02 AM, Junjie Chen wrote:
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero which makes *allow_queuing* always zero until dev_start
get called again. Actually, we should not
If we want a virtio device to work in vDPA (vhost data path acceleration)
mode, we could add a "vdpa=1" devarg for this device to specify the mode.
This patch let virtio pmd skip device probe when detecting this parameter.
Signed-off-by: Xiao Wang
Reviewed-by: Maxime Coquelin
Reviewed-by: Ferru
On 04/12/2018 09:21 AM, Tan, Jianfeng wrote:
On 4/12/2018 1:02 AM, Junjie Chen wrote:
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero which makes *allow_queuing* always zero until dev
v3:
- Change VXLAN-GPE definition order to avoid ABI compatibility issue.
v2:
- Split patch set into public and mlx5 two series, this one is the first.
v1:
- Support new tunnel type MPLS-in-GRE and MPLS-in-UDP
- Remove deprecation notes of rss level
This patchset introduced new tunnel type and rel
Remove deprecation as implementation of RSS level provided in Adrien's
patch set: http://www.dpdk.org/dev/patchwork/patch/37399/
Signed-off-by: Xueming Li
Acked-by: Adrien Mazarguil
---
doc/guides/rel_notes/deprecation.rst | 4
1 file changed, 4 deletions(-)
diff --git a/doc/guides/rel_no
VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li
---
doc/guides/prog_guide/rte_flow.rst | 12
lib/librte_ether/rte_eth_ctrl.h| 3 ++-
lib/librte_ether/rte_flow.c| 1 +
lib/librt
This patch adds GRE checksum and sequence extension supports in addtion
to key extension to csum forwarding engine.
Signed-off-by: Xueming Li
---
app/test-pmd/csumonly.c | 20
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/app/test-pmd/csumonly.c b/app/test-p
This patch adds new tunnel type for MPLS-in-GRE and MPLS-in-UDP.
MPLS-in-GRE protocol link:
https://tools.ietf.org/html/rfc4023
MPLS-in-UDP protocol link:
https://tools.ietf.org/html/rfc7510
Signed-off-by: Xueming Li
Acked-by: Adrien Mazarguil
---
lib/librte_mbuf/rte_mbuf_ptype.c | 2 ++
lib
>
>
>
> On 04/12/2018 09:21 AM, Tan, Jianfeng wrote:
> >
> >
> > On 4/12/2018 1:02 AM, Junjie Chen wrote:
> >> dev_start sets *dev_attached* after setup queues, this sets device to
> >> invalid state since no frontend is attached. Also destroy_device set
> >> *started* to zero which makes *allow
Add VXLAN-GPE support to csum forwarding engine and rte flow.
Signed-off-by: Xueming Li
---
app/test-pmd/cmdline_flow.c | 24 ++
app/test-pmd/config.c | 2 +
app/test-pmd/csumonly.c | 83 +--
app/test-pmd/parameters
On 04/12/2018 09:34 AM, Chen, Junjie J wrote:
On 04/12/2018 09:21 AM, Tan, Jianfeng wrote:
On 4/12/2018 1:02 AM, Junjie Chen wrote:
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero
On 4/12/2018 3:29 PM, Maxime Coquelin wrote:
On 04/12/2018 09:21 AM, Tan, Jianfeng wrote:
On 4/12/2018 1:02 AM, Junjie Chen wrote:
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero w
On 11.04.2018 12:51, Ferruh Yigit wrote:
On 4/11/2018 10:36 AM, Matej Vido wrote:
On 10.04.2018 17:28, Ferruh Yigit wrote:
On 4/6/2018 3:12 PM, Matej Vido wrote:
NFB cards employ multiple Ethernet ports.
Until now, Ethernet port-related operations were performed on all of them
(since the whole
On 04/12/2018 09:35 AM, Maxime Coquelin wrote:
On 04/12/2018 09:34 AM, Chen, Junjie J wrote:
On 04/12/2018 09:21 AM, Tan, Jianfeng wrote:
On 4/12/2018 1:02 AM, Junjie Chen wrote:
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is a
This patch set adds support for new card NFB-200G2QL.
v2:
Rebased on top of dpdk-next-net/master (conflict in release notes
for patch 2).
Svg image in patch 1 replaced by redrawn image to avoid too long lines.
Matej Vido (3):
net/szedata2: do not affect Ethernet interfaces
net/szedata2: add s
This patch adds support for new NIC NFB-200G2QL.
At the probing stage numa nodes for the DMA queues are identified
and the appropriate number of ports is allocated.
DMA queues residing on the same numa node are grouped in the same
port.
Signed-off-by: Matej Vido
---
v2:
Rebased on top of dpdk-ne
NFB cards employ multiple Ethernet ports.
Until now, Ethernet port-related operations were performed on all of them
(since the whole card was represented as a single port).
With new NFB-200G2QL card, this is no longer viable.
Since there is no fixed mapping between the queues and Ethernet ports,
a
New kernel module dependency is required to support NFB-200G2QL card.
Signed-off-by: Matej Vido
---
drivers/net/szedata2/rte_eth_szedata2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/szedata2/rte_eth_szedata2.c
b/drivers/net/szedata2/rte_eth_szedata2.c
index
06/04/2018 05:55, Jeff Guo:
> v21->v20:
This is a very high number of revisions.
I cannot see them in my mail client because they are too much nested
and indented in the thread representation.
Tip: when sending a new revision, it is better to thread it with the
first revision, so we do not have an
Signed-off-by: Akhil Goyal
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index e54c1f0..b46d04a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -45,6 +45,7 @@ T: git://dpdk.org/next/dpdk-next-virtio
Next-crypto Tree
M: Pablo de Lara
+M: Akhil Goy
In some cases we want vhost dequeue work in interrupt mode to
release cpus to others when no data to transmit. So we install
interrupt handler of vhost device and interrupt vectors for each
rx queue when creating new backend according to vhost intrerupt
configuration. Thus, applications could regis
Update license to SPDX, also add Intel license.
Signed-off-by: Junjie Chen
---
drivers/net/vhost/rte_eth_vhost.c | 34 +++---
1 file changed, 3 insertions(+), 31 deletions(-)
diff --git a/drivers/net/vhost/rte_eth_vhost.c
b/drivers/net/vhost/rte_eth_vhost.c
index 8b
Hi Adrien
> -Original Message-
> From: Adrien Mazarguil [mailto:adrien.mazarg...@6wind.com]
> Sent: Thursday, April 12, 2018 3:04 PM
> To: Zhang, Qi Z
> Cc: dev@dpdk.org; Doherty, Declan ; Chandran,
> Sugesh ; Glynn, Michael J
> ; Liu, Yu Y ; Ananyev,
> Konstantin ; Richardson, Bruce
>
>
On Friday 30 March 2018 07:17 PM, Thomas Monjalon wrote:
There are some discussions about a specific part of the offload API:
"To enable per-port offload, the offload should be set on both
device configuration and queue setup."
It means the application must repeat the port offloa
Update license to SPDX, also add Intel license.
Signed-off-by: Junjie Chen
---
drivers/net/vhost/rte_eth_vhost.c | 34 +++---
drivers/net/vhost/rte_eth_vhost.h | 35 +++
2 files changed, 6 insertions(+), 63 deletions(-)
diff --git a/dr
On Tue, Apr 10, 2018 at 03:22:46PM +, Xueming(Steven) Li wrote:
> Hi Nelio,
>
> > -Original Message-
> > From: Nélio Laranjeiro
> > Sent: Tuesday, April 10, 2018 10:42 PM
> > To: Xueming(Steven) Li
> > Cc: Shahaf Shuler ; dev@dpdk.org
> > Subject: Re: [PATCH v2 01/15] net/mlx5: suppo
On Thu, Apr 12, 2018 at 05:12:08AM +, Zhang, Qi Z wrote:
> Hi Adrien:
>
> Thank you so much for your careful review and helpful suggestions!
> I agree with most of your comments, except couple question about
> RTE_FLOW_ITEM_TYPE_TGT_ADDR and RTE_FLOW_ITEM_IPV6_EXT_HDR
> Plea
On Wed, Apr 11, 2018 at 08:11:50AM +, Xueming(Steven) Li wrote:
> Hi Nelio,
>
> > -Original Message-
> > From: Nélio Laranjeiro
> > Sent: Tuesday, April 10, 2018 11:17 PM
> > To: Xueming(Steven) Li
> > Cc: Shahaf Shuler ; dev@dpdk.org
> > Subject: Re: [PATCH v2 04/15] net/mlx5: suppo
> -Original Message-
> From: Adrien Mazarguil [mailto:adrien.mazarg...@6wind.com]
> Sent: Thursday, April 12, 2018 5:20 PM
> To: Zhang, Qi Z
> Cc: dev@dpdk.org; Doherty, Declan ; Chandran,
> Sugesh ; Glynn, Michael J
> ; Liu, Yu Y ; Ananyev,
> Konstantin ; Richardson, Bruce
>
> Subject:
On Thu, Apr 12, 2018 at 08:50:14AM +, Zhang, Qi Z wrote:
> Hi Adrien
>
> > -Original Message-
> > From: Adrien Mazarguil [mailto:adrien.mazarg...@6wind.com]
> > Sent: Thursday, April 12, 2018 3:04 PM
> > To: Zhang, Qi Z
> > Cc: dev@dpdk.org; Doherty, Declan ; Chandran,
> > Sugesh ; Gl
https://dpdk.org/tracker/show_bug.cgi?id=18
Indicated that several mmap call sites in the [linux|bsd]app eal code
set fd that was not -1 in their calls while using MAP_ANONYMOUS. While
probably not a huge deal, the man page does say the fd should be -1 for
portability, as some implementations don
On Wed, Apr 11, 2018 at 02:04:03AM +0200, Gaetan Rivet wrote:
> Build a central list to quickly see each used priorities for
> constructors, allowing to verify that they are both above 100 and in the
> proper order.
>
> Signed-off-by: Gaetan Rivet
> Acked-by: Neil Horman
> Acked-by: Shreyansh Ja
Hi Vipin,
This patch (adding TUN to TAP) has been Acked and accepted in next-net branch.
I have some questions regarding the implementation (please find below).
> -Original Message-
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Vipin Varghese
> Sent: Tuesday, April 03, 2018 12:38
> -Original Message-
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Junjie Chen
> Sent: Thursday, April 12, 2018 6:32 AM
> To: Xing, Beilei ; Zhang, Qi Z
> Cc: dev@dpdk.org; Chen, Junjie J ; c...@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/i40e: update tx_free_threshold to improve
On Thu, Apr 12, 2018 at 03:33:23PM +0800, Xueming Li wrote:
> Add VXLAN-GPE support to csum forwarding engine and rte flow.
>
> Signed-off-by: Xueming Li
This commit still misses testpmd documentation for the new flow command
parameters ("Pattern items" section in
doc/guides/testpmd_app_ug/testp
On Thu, Apr 12, 2018 at 03:33:21PM +0800, Xueming Li wrote:
> VXLAN-GPE enables VXLAN for all protocols. Protocol link:
> https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
>
> Signed-off-by: Xueming Li
A couple of remaining minor comments, see below. Once addressed:
Acked-by: Adrien Maza
On 12-Apr-18 12:16 PM, Neil Horman wrote:
https://dpdk.org/tracker/show_bug.cgi?id=18
Indicated that several mmap call sites in the [linux|bsd]app eal code
set fd that was not -1 in their calls while using MAP_ANONYMOUS. While
probably not a huge deal, the man page does say the fd should be -1
On 4/13/2018 12:28 AM, Junjie Chen wrote:
In some cases we want vhost dequeue work in interrupt mode to
release cpus to others when no data to transmit. So we install
interrupt handler of vhost device and interrupt vectors for each
rx queue when creating new backend according to vhost intrerupt
rte_hash_lookup_with_hash() has wrong comment for its 'sig' param.
Fixes: 1a9f648be291 ("hash: fix for multi-process apps")
Signed-off-by: Shreyansh Jain
---
lib/librte_hash/rte_hash.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_hash/rte_hash.h b/lib/librte_ha
Hi Junjie:
> -Original Message-
> From: Ananyev, Konstantin
> Sent: Thursday, April 12, 2018 7:52 PM
> To: Chen, Junjie J ; Xing, Beilei
> ; Zhang, Qi Z
> Cc: dev@dpdk.org; Chen, Junjie J ; c...@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH] net/i40e: update tx_free_threshold to
> improve zer
On 04/12/2018 06:43 PM, Junjie Chen wrote:
Update license to SPDX, also add Intel license.
Signed-off-by: Junjie Chen
---
drivers/net/vhost/rte_eth_vhost.c | 34 +++---
drivers/net/vhost/rte_eth_vhost.h | 35 +++
2 files changed,
-Original Message-
> Date: Tue, 10 Apr 2018 02:30:24 +0530
> From: Pavan Nikhilesh
> To: jerin.ja...@caviumnetworks.com, santosh.shu...@caviumnetworks.com,
> erik.g.carri...@intel.com
> Cc: dev@dpdk.org, Pavan Nikhilesh
> Subject: [dpdk-dev] [PATCH v4 00/11] event/octeontx: add event tim
12/04/2018 14:05, Burakov, Anatoly:
> On 12-Apr-18 12:16 PM, Neil Horman wrote:
> > https://dpdk.org/tracker/show_bug.cgi?id=18
> >
> > Indicated that several mmap call sites in the [linux|bsd]app eal code
> > set fd that was not -1 in their calls while using MAP_ANONYMOUS. While
> > probably not
On Thu, Apr 12, 2018 at 12:20:07PM +, Zhang, Qi Z wrote:
> Hi Junjie:
>
> > -Original Message-
> > From: Ananyev, Konstantin
> > Sent: Thursday, April 12, 2018 7:52 PM
> > To: Chen, Junjie J ; Xing, Beilei
> > ; Zhang, Qi Z
> > Cc: dev@dpdk.org; Chen, Junjie J ; c...@dpdk.org
> > Subj
a compilation error occurred when compiling with CONFIG_RTE_EAL_VFIO=n
== Build lib/librte_eal/linuxapp/eal
CC eal_vfio.o
/download/dpdk/lib/librte_eal/linuxapp/eal/eal_vfio.c:1535:1: error: no
previous prototype for 'rte_vfio_dma_map' [-Werror=missing-prototypes]
rte_vfio_dma_map(uint64_t __rt
> -Original Message-
> From: Nélio Laranjeiro
> Sent: Thursday, April 12, 2018 5:09 PM
> To: Xueming(Steven) Li
> Cc: Shahaf Shuler ; dev@dpdk.org
> Subject: Re: [PATCH v2 01/15] net/mlx5: support 16 hardware priorities
>
> On Tue, Apr 10, 2018 at 03:22:46PM +, Xueming(Steven) Li w
> -Original Message-
> From: Richardson, Bruce
> Sent: Thursday, April 12, 2018 2:12 PM
> To: Zhang, Qi Z
> Cc: Ananyev, Konstantin ; Chen, Junjie J
> ; Xing, Beilei ;
> dev@dpdk.org; c...@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] net/i40e: update tx_free_threshold to improve
> zero c
On Thu, Apr 12, 2018 at 01:43:04PM +, Xueming(Steven) Li wrote:
>
>
> > -Original Message-
> > From: Nélio Laranjeiro
> > Sent: Thursday, April 12, 2018 5:09 PM
> > To: Xueming(Steven) Li
> > Cc: Shahaf Shuler ; dev@dpdk.org
> > Subject: Re: [PATCH v2 01/15] net/mlx5: support 16 har
On Thu, Apr 12, 2018 at 06:09:04AM +, Sunil Kumar Kori wrote:
> Gentle reminder to review the RFC.
>
> Regards
> Sunil Kumar
>
Hi,
sorry for the delay in review.
/Bruce
> -Original Message-
> From: Sunil Kumar Kori [mailto:sunil.k...@nxp.com]
> Sent: Monday, March 19, 2018 7:15 P
On 12-Apr-18 8:19 AM, Xiao Wang wrote:
Currently eal vfio framework binds vfio group fd to the default
container fd during rte_vfio_setup_device, while in some cases,
e.g. vDPA (vhost data path acceleration), we want to put vfio group
to a separate container and program IOMMU via this container.
On 12-Apr-18 2:34 PM, Shahaf Shuler wrote:
a compilation error occurred when compiling with CONFIG_RTE_EAL_VFIO=n
== Build lib/librte_eal/linuxapp/eal
CC eal_vfio.o
/download/dpdk/lib/librte_eal/linuxapp/eal/eal_vfio.c:1535:1: error: no
previous prototype for 'rte_vfio_dma_map' [-Werror=missi
-Original Message-
> Date: Thu, 12 Apr 2018 15:03:22 +0100
> From: Bruce Richardson
> To: Sunil Kumar Kori
> CC: "dev@dpdk.org" , Hemant Agrawal
> Subject: Re: [dpdk-dev] [PATCH] examples/l3fwd: adding event queue support
> User-Agent: Mutt/1.9.4 (2018-02-28)
>
> On Thu, Apr 12, 2018 at
> -Original Message-
> From: Nélio Laranjeiro
> Sent: Thursday, April 12, 2018 5:51 PM
> To: Xueming(Steven) Li
> Cc: Shahaf Shuler ; dev@dpdk.org
> Subject: Re: [PATCH v2 04/15] net/mlx5: support Rx tunnel type
> identification
>
> On Wed, Apr 11, 2018 at 08:11:50AM +, Xueming(Ste
> -Original Message-
> From: Shreyansh Jain [mailto:shreyansh.j...@nxp.com]
> Sent: Thursday, April 12, 2018 1:34 PM
> To: Richardson, Bruce ; De Lara Guarch, Pablo
>
> Cc: dev@dpdk.org; Shreyansh Jain
> Subject: [PATCH] lib/librte_hash: fix incorrect comment for lookup
>
> rte_hash_lo
Flow director mask as been mistakenly removed from mlx5 PMD. This series
brings it back.
Nelio Laranjeiro (2):
net/mlx5: split L3/L4 in flow director
net/mlx5: fix flow director mask
drivers/net/mlx5/mlx5_flow.c | 155 ---
1 file changed, 69 insertions(+), 86
This will help to bring back the mask handler which was removed when this
feature was rewritten on top of rte_flow.
Signed-off-by: Nelio Laranjeiro
Acked-by: Adrien Mazarguil
---
drivers/net/mlx5/mlx5_flow.c | 112 ---
1 file changed, 37 insertions(+), 75 deletio
During the transition to resurrect flow director on top of rte_flow, mask
handling was removed by mistake.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Cc: sta...@dpdk.org
Signed-off-by: Nelio Laranjeiro
Acked-by: Adrien Mazarguil
---
drivers/net/mlx5/mlx5_flow.c | 59 ++
This patch set proposes enhancements to testpmd to simulate
more realistic behavior of a guest machine engaged in receiving
and sending packets performing Virtual Network Function (VNF).
The goal is to enable simple of measuring performance impact on cache and
memory footprint utilization from va
Create a fifo to buffer received packets. Once it flows over put
those packets into the actual tx queue. The fifo is created per tx
queue and its size can be set with the --buffersize-before-sending
commandline parameter.
A second commandline parameter is used to set a timeout in
milliseconds afte
Add several options to simulate route lookups (memory reads) in tables
that can be quite large, as well as route hit statistics update.
These options simulates the while stack traversal and
will trash the cache. Memory access is random.
Options to simulate route lookups:
--memory-footprint [size]
On 28-Mar-18 5:51 AM, Ajit Khaparde wrote:
From: Srinath Mannam
Reserved physical memory is requested from kernel
and it will be mapped to user space.
This memory will be mapped to IOVA using VFIO.
And this memory will be provided to SPDK to allocate
NVMe CQs.
Signed-off-by: Srinath Mannam
Si
> -Original Message-
> From: Nélio Laranjeiro
> Sent: Thursday, April 12, 2018 10:03 PM
> To: Xueming(Steven) Li
> Cc: Shahaf Shuler ; dev@dpdk.org
> Subject: Re: [PATCH v2 01/15] net/mlx5: support 16 hardware priorities
>
> On Thu, Apr 12, 2018 at 01:43:04PM +, Xueming(Steven) Li
Hi,
>
> Create a fifo to buffer received packets. Once it flows over put
> those packets into the actual tx queue. The fifo is created per tx
> queue and its size can be set with the --buffersize-before-sending
> commandline parameter.
>
> A second commandline parameter is used to set a timeout
On 26-Mar-18 5:09 PM, Andrew Rybchenko wrote:
Size of memory chunk required to populate mempool objects depends
on how objects are stored in the memory. Different mempool drivers
may have different requirements and a new operation allows to
calculate memory size in accordance with driver requirem
On 20-Mar-18 8:50 AM, Jianfeng Tan wrote:
Previously, vfio uses its own private channel for the secondary
process to get container fd and group fd from the primary process.
This patch changes to use the generic mp channel.
Test:
1. Bind two NICs to vfio-pci.
2. Start the primary and seco
Hi Anatoly,
> -Original Message-
> From: Burakov, Anatoly
> Sent: Thursday, April 12, 2018 10:04 PM
> To: Wang, Xiao W ; Yigit, Ferruh
>
> Cc: dev@dpdk.org; maxime.coque...@redhat.com; Wang, Zhihong
> ; Bie, Tiwei ; Tan, Jianfeng
> ; Liang, Cunming ; Daly,
> Dan ; tho...@monjalon.net; gae
On 4/12/2018 8:41 AM, Matej Vido wrote:
> + if (pci_dev->id.device_id == PCI_DEVICE_ID_NETCOPE_NFB200G2QL) {
> + unsigned int i;
> + unsigned int rx_queues = max_rx_queues / max_ports;
> + unsigned int tx_queues = max_tx_queues / max_ports;
> +
> +
On 4/5/2018 6:49 PM, Thomas Monjalon wrote:
> Pascal, Moti, Ophir,
> please comment.
Hi Moti,
Any comment? This has been asked many times now.
>
> 22/03/2018 19:28, Ferruh Yigit:
>> It is not clear if tap PMD supports queue specific offloads, removing
>> the related code.
>>
>> Fixes: 95ae196ae
On 12-Apr-18 5:07 PM, Wang, Xiao W wrote:
Hi Anatoly,
<...>
Also, why providing DMA type? There's already a VFIO type pointer in
vfio_config - you can set this pointer for every new created container,
so the user wouldn't have to care about IOMMU type. Is it not possible
to figure out DMA t
On 4/12/2018 3:57 PM, Ananyev, Konstantin wrote:
> Hi,
>
>>
>> Create a fifo to buffer received packets. Once it flows over put
>> those packets into the actual tx queue. The fifo is created per tx
>> queue and its size can be set with the --buffersize-before-sending
>> commandline parameter.
>>
>
> >
> > > > >
> > > > > On Mon, Apr 09, 2018 at 06:04:34PM +0200, Olivier Matz wrote:
> > > > > > Hi Yongseok,
> > > > > >
> > > > > > On Tue, Apr 03, 2018 at 05:12:06PM -0700, Yongseok Koh wrote:
> > > > > > > On Tue, Apr 03, 2018 at 10:26:15AM +0200, Olivier Matz wrote:
> > > > > > > > Hi,
> > >
On 3/28/2018 12:16 PM, Matan Azrad wrote:
> Ethernet devices which are grouped by bonding PMD, aka slaves, are
> sharing the same queues and RSS configurations and their Rx burst
> functions must be managed by the bonding PMD according to the bonding
> architectuer.
>
> So, it makes sense to confi
On 4/3/2018 9:57 AM, Wei Dai wrote:
> Existed testpmd commands can't support per queue offload configuration.
> And there are different commands to enable or disable different offloading.
> This patch set add following commands to support new Tx/Rx offloading API
> test.
>
> To get Rx offload cap
On 4/9/2018 3:02 PM, Ferruh Yigit wrote:
> On 4/9/2018 2:56 PM, Kumar, Ravi1 wrote:
>>> This patch fixes a tirvial error in assigning max Rx/Tx queues in
>>> axgbe_dev_info_get() of the axgbe PMD driver.
>>>
>>> Signed-off-by: Rami Rosen
>>> ---
>>> drivers/net/axgbe/axgbe_ethdev.c | 4 ++--
>>>
On 4/10/2018 1:48 PM, Andrew Rybchenko wrote:
> All FEC modes are supported and allowed, but none are explicitly
> requested.
>
> This effectively means that FEC mode is determined solely form cable
> requirements and link partner capabilities / requirements.
>
> Signed-off-by: Andrew Rybchenko
On 4/11/2018 12:05 PM, Sunil Kumar Kori wrote:
> Patchset contains changes to support ethdev offload APIs for DPAA and DPAA2
> drivers.
>
> Offloading support is categoriesed in following logical parts:
> 1. If requested offloading features is not supported then returned error.
> 2. If requested o
On 4/11/2018 11:33 AM, Alejandro Lucero wrote:
> This new LSO offload version facilitates how firmware implements
> this functionality and helps improving the performance.
>
> Signed-off-by: Alejandro Lucero
Applied to dpdk-next-net/master, thanks.
Hi,
I've run into a problem with DPDK v17.08, when built with
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y. After rte_eal_init() calls rte_bus_probe()
we end up with the first several entries (matching the number of virtio-pci
eth devices on the system) in rte_eth_devices[] showing state ==
RTE_ETH_DEV_ATTACHE
On 4/11/2018 2:10 PM, Alejandro Lucero wrote:
> hained metadata instead of prepend metadata was added in
> firmware version 4. However, it could be old firmwares evolving
> but not supporting chained metadata.
>
> This patch adds support for an old firmware being updated and
> getting a firmware v
On Thu, Apr 12, 2018 at 04:34:56PM +, Ananyev, Konstantin wrote:
> > >
> > > > > >
> > > > > > On Mon, Apr 09, 2018 at 06:04:34PM +0200, Olivier Matz wrote:
> > > > > > > Hi Yongseok,
> > > > > > >
> > > > > > > On Tue, Apr 03, 2018 at 05:12:06PM -0700, Yongseok Koh wrote:
> > > > > > > > On Tu
On 4/9/18, 2:00 AM, "dev on behalf of Hemant Agrawal" wrote:
Cc: skh...@vmware.com
Signed-off-by: Hemant Agrawal
---
Acked-by: Yong Wang
drivers/net/vmxnet3/base/upt1_defs.h| 7 ++-
drivers/net/vmxnet3/base/vmxnet3_defs.h | 7 ++-
2 files changed, 4 in
Hello Neil,
On Thu, Apr 12, 2018 at 07:28:26AM -0400, Neil Horman wrote:
> On Wed, Apr 11, 2018 at 02:04:03AM +0200, Gaetan Rivet wrote:
> > Build a central list to quickly see each used priorities for
> > constructors, allowing to verify that they are both above 100 and in the
> > proper order.
>
Hi,
The integration deadline is passed by one week, and the first
release candidate is still far from being ready.
This time it is really, really late.
We will try to do this RC1 on the 20th of April, but no guarantee.
Then we may have a lot of new drivers or features to integrate
in the next rel
Two fixes, one which is fairly obvious (1/2), the other which may
allow support of non-root users. These patches are only compile tested
which is why they are submitted as RFC. After a proper test, will
resubmit them as PATCH (with any suggested / recommended changes).
Aaron Conole (2):
nfp: u
Currently, the nfp lock files are taken from the global lock file
location, which will work when the user is running as root. However,
some distributions and applications (notably ovs 2.8+ on RHEL/Fedora)
run as a non-root user.
Signed-off-by: Aaron Conole
---
drivers/net/nfp/nfp_nfpu.c | 23 ++
The nfpu_close needs to unlink the lock file associated with the
nfp descriptor, not lock file 0.
Fixes: d12206e00590 ("net/nfp: add NSP user space interface")
Cc: sta...@dpdk.org
Signed-off-by: Aaron Conole
---
drivers/net/nfp/nfp_nfpu.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(
12/04/2018 08:23, Hemant Agrawal:
> This patch moves some of the internal vfio functions from
> eal_vfio.h to rte_vfio.h for common uses with "rte_" prefix.
>
> This patch also change the FSLMC bus usages from the internal
> VFIO functions to external ones with "rte_" prefix
>
> Signed-off-by: He
10/04/2018 12:23, Anatoly Burakov:
> We only need to perform DMA mapping for first device in first group.
> At the time of mapping, we haven't yet added the device into the group,
> so the count is expected to be zero.
>
> Fixes: 810bfa64c673 ("vfio: fix index for tracking devices in a group")
> F
05/04/2018 16:26, Tan, Jianfeng:
> Hi Anatoly,
>
> An obvious action would be change rte_mp_request to
> rte_mp_request_sync(). Before sending out the new patch, do you have any
> other comments for this patch?
>
> Hi Thomas,
>
> Several patches will change vfio; may I know the your preferred
Hi Jinafeng,
05/04/2018 19:44, Jianfeng Tan:
> As we know, we have below limitations in vdev:
> - dpdk-procinfo cannot get the stats of (most) vdev in primary process;
> - dpdk-pdump cannot dump the packets for (most) vdev in primary proces;
> - secondary process cannot use (most) vdev in pr
12/04/2018 16:13, Burakov, Anatoly:
> On 12-Apr-18 2:34 PM, Shahaf Shuler wrote:
> > a compilation error occurred when compiling with CONFIG_RTE_EAL_VFIO=n
> >
> > == Build lib/librte_eal/linuxapp/eal
> >CC eal_vfio.o
> > /download/dpdk/lib/librte_eal/linuxapp/eal/eal_vfio.c:1535:1: error: no
Hi Choudaha:
> -Original Message-
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Shweta Choudaha
> Sent: Wednesday, April 11, 2018 10:00 PM
> To: dev@dpdk.org
> Cc: Lu, Wenzhuo ; Ananyev, Konstantin
> ; Zhang, Helin ; Yigit,
> Ferruh ; shweta.choud...@att.com
> Subject: [dpdk-dev]
Hi Ophir,
Please find my answers inline to the queries.
> -Original Message-
> From: Ophir Munk [mailto:ophi...@mellanox.com]
> Sent: Thursday, April 12, 2018 5:19 PM
> To: Varghese, Vipin ; dev@dpdk.org;
> pascal.ma...@6wind.com; Yigit, Ferruh ; Thomas
> Monjalon ; Olga Shern ;
> Shahaf
1 - 100 of 107 matches
Mail list logo