Silwal
>
>
> From: Gregory Nutt
> Sent: Tuesday, February 13, 2024 02:37
> To: dev@nuttx.apache.org
> Subject: Re: Addition of New Chip STM32F427AI
>
> The STM32F427AI is in the same family as STM32F427xx (STM32F427V,
> STM32F427Z, STM32F
han Silwal
From: Gregory Nutt
Sent: Tuesday, February 13, 2024 02:37
To: dev@nuttx.apache.org
Subject: Re: Addition of New Chip STM32F427AI
The STM32F427AI is in the same family as STM32F427xx (STM32F427V,
STM32F427Z, STM32F427I) and STM32F429xx, which are already
The STM32F427AI is in the same family as STM32F427xx (STM32F427V,
STM32F427Z, STM32F427I) and STM32F429xx, which are already supported.
The first thing to do is to decide which is of the supported parts is
most like the STM32F427AI. Mostly likely it is just a difference in
memory size or
Hi Janardhan,
You can start looking at which STM32F4xx chip existent on NuttX is more
similar to STM32F427AI and start your port based on it.
You can do it using the chip datasheet and/or reference manual, writing
down the difference in peripherals, registers, etc.
Normally STM32 devices share
Hi Community,
I have a board which uses STM32F427AI, and was planning on running a middleware
which runs over nuttx, but only noticed, after the board arrived from
manufacturing that there is no option to select, STM32F427AI from the
menuconfig/qconfig.
I don't have an option to replace the