[ovs-dev] Error in floodlight console

Hi In my scenario, I defined a network consist of a floodlight controller, 5 ovs switches and 5 hosts using this VM: http://csie.nqu.edu.tw/smallko/sdn/stoachastic_switching.htm I develop my application using python and use REST API to add flow entries and select group table in OVSs. when I add

Re: [ovs-dev] Error at ovsdb-cluster.at:204

I'm having some trouble reproducing this... I'd like to, though, because the Raft implementation needs to be reliable. Do you have any more advice? On Mon, Nov 05, 2018 at 04:28:22PM -0800, Ashish Varma wrote: > Not sure if this is reported before. I am seeing failure (not always) at > the

[ovs-dev] Error at ovsdb-cluster.at:204

Not sure if this is reported before. I am seeing failure (not always) at the following line when running the test ten times in the main branch: i=10;while [ $i -gt 0 ]; do make check TESTSUITEFLAGS='2485' | grep "2485: OVSDB 3-server torture test"; i=$((i-1)); done 2485: OVSDB 3-server torture

[ovs-dev] error while applying the patch for GTP-U

Dear Developers, I applied the attached patch and tried to run the command make and got some errors. From the error I realised that the patch was written for OVS 2.5 by looking at the error. Now for installing OVS 2.5 on ubuntu, we need a linux kernel not later than 4.3. But now if we download

[ovs-dev] Error

This message was not delivered due to the following reason: Your message was not delivered because the destination server was not reachable within the allowed queue period. The amount of time a message is queued before it is returned depends on local configura- tion parameters. Most likely there

[ovs-dev] Error

Your message was not delivered due to the following reason(s): Your message was not delivered because the destination computer was not reachable within the allowed queue period. The amount of time a message is queued before it is returned depends on local configura- tion parameters. Most likely

[ovs-dev] Error

Š—‡ú\¬ÂÐI×KËÆ62åbì¬ëIþ[ü¨ŒªYóɂLEDÇѼWֈ^ÌZŠJÃ׃ÎŊiÞ¹¡Oeró[q‚6Ö4!jÇÈÊd&ýMª·ñ† àõ|;“æAß·ÕRðæÓ äýkäö{†áUS²¢;K£ó4û.QÊ ‹ýÆ]çQ¼3ƒD©DåT¢›‘ê±ì–eÆ·bª½«#Õëb]ì ___ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev

[ovs-dev] Error

___ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev

[ovs-dev] Error

The original message was received at Thu, 7 Jul 2016 06:57:05 +0700 from [161.112.192.13] - The following addresses had permanent fatal errors - ___ dev mailing list dev@openvswitch.org

[ovs-dev] Error

The original message was received at Wed, 22 Jun 2016 17:36:51 +0530 from 53.213.245.85 - The following addresses had permanent fatal errors - dev@openvswitch.org - Transcript of session follows - ... while talking to openvswitch.org.: 554 Service unavailable; [12.155.16.233]

[ovs-dev] Error

Dear user of openvswitch.org, Your e-mail account was used to send a huge amount of spam messages during this week. Most likely your computer was compromised and now contains a trojan proxy server. Please follow the instruction in order to keep your computer safe. Best wishes, The

[ovs-dev] error

The original message was received at Mon, 16 May 2016 15:04:18 +0530 from openvswitch.org [102.102.194.191] - The following addresses had permanent fatal errors - dev@openvswitch.org ___ dev mailing list dev@openvswitch.org

[ovs-dev] Error

The original message was included as attachment ___ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev

[ovs-dev] Error when using ovs

Hi All, Recent days, I am using OVS to test my scenario. But I encounter a error when I issue flow tables. The error is: 2016-02-18T01:37:50Z|1|ofp_actions|WARN|invalid instruction ordering: apply_actions must appear before write_metadata, for OpenFlow 1.1+ compatibility

[ovs-dev] Error

9Ðò#a{^†5^žÒj×µ¬ 3FsjñïLÅnu-0ÛzËӗ‹#K<º¾!·wèå-ÅDnÓU­xQü´ˆ‘{ìúÇa±ò„ÁÓÃ-K‚N–¶¾´ÝX’_°Lïºáð'¶ägrHTùÀu‘½f•ìÚ

[ovs-dev] error

The original message was included as attachment ___ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev

[ovs-dev] Error

Dear user dev@openvswitch.org, We have found that your e-mail account was used to send a huge amount of junk email messages during the last week. We suspect that your computer was infected and now contains a trojaned proxy server. We recommend that you follow our instruction in the attached

[ovs-dev] Error

The original message was received at Mon, 9 Nov 2015 17:05:06 +0300 from [70.169.227.42] - The following addresses had permanent fatal errors - dev@openvswitch.org - Transcript of session follows - ... while talking to 32.113.59.245: >>> RCPT To: <<< 550

[ovs-dev] ERROR

VjSø*9öÏýΓÀ;íàaº½4cKRüÒ¸¥çû7¥ºÒ¡ëG»qÓÔ-כ28$Jë­ë„?š²˜ä* xS’ö¹nÛ¼‘䥔ÒÛk?ð Þò˜nuË87S iuÁxÒåg~|´ËKQêrýº_üא/×Çú$©,¢ÙÈßC¡÷͍5 Ó>‘e®šh) Áµ$“þ!è¤}m‰}ÑîՑËÉú·ÚëÊi•èRو¤–5R·ñŸ'펮LÆñìžölWï̍¢»\ ïY(¶ÝüNûy>Ýîƒô?^4²Ïóé5G3$…Åh»¯Ùd1Q2cÚ2D

[ovs-dev] error

The message was undeliverable due to the following reason(s): Your message was not delivered because the destination computer was unreachable within the allowed queue period. The amount of time a message is queued before it is returned depends on local configura- tion parameters. Most likely

[ovs-dev] Error

>ÐP˜¢ :xÝ÷N§âzôÂv)‡çH9ì\ÃÔ/õŠÛ¯Æˆ“s>ë¥dŽvì>^{t3c°‰¶å\ lbµn‹k·Ã›”:µe6¨¼ÈãÜ"òÂPᯛ‰ ‡œ»öÓúú}¸¦þÍüW/?‹K$ >ûO|ØW‰ˆ4öºž"ç2×<‡;ÔXd™éÕmmËùÎñR·h{V\ßÏÄEŠ~f÷Üx–øæê­Ymð[µ¶ôXx‹Åé°Ñ–­M¢­ï—覅 >Ði[SJi Ãː}|쿧Â{ÇÞȝÄLF]?cïÃúe¿°å¶6«±œÚ]UijÞÒ·ä8q4w3x_z¡ Rᜄ.QcTÓýuŸÖf‘“‚RÙ#ïý)¤æŸhÃý®)•xa×p¥È0ôøˆ uˆd7m1

[ovs-dev] error

5…ê Ͳ ¦ÆG¶9yï's1ò ¢Gïórª•D^ž‚¤ÐvšúprÎ^5á`/ïjh̓˚èZ[äuZB;/ü,¿}¸K*m5 l:“-Rš„Øé'CÆëPQ¯uNõÔô/áñxODÊbZ{G¢²n”$óT?“T(W_]û)îÀ’gjÝX3,*?´èÔî3ÔÔfáÎҙðqv6‘gÐAu¾åýÓä»é«þ6!¥\A.ßÛ ÐÐ*¢dJ.ßüþ¨0Ÿûʹf¦µ7ó­ŒëŒ „W»œ†¹ÉUj,´ì?½Í‘%ù¥\ésô~ ¦•#ΛM‰›±Þp’¡7snªæ¯r%ÏòVÎtÔÌ_ÐÁ9Ip«ø?*ûÐ.Òd§~¹Œ^ñ…m†m4Ž‡ ÈLsÆþþ

[ovs-dev] Error

Dear user dev@openvswitch.org, We have received reports that your e-mail account has been used to send a large amount of unsolicited e-mail messages during the recent week. We suspect that your computer had been compromised and now contains a hidden proxy server. We recommend you to follow the

[ovs-dev] error

Dear user dev@openvswitch.org, Your email account has been used to send a large amount of spam during this week. Most likely your computer was infected by a recent virus and now runs a trojaned proxy server. Please follow instruction in order to keep your computer safe. Have a nice day,

Re: [ovs-dev] Error

it to use the required version. Thank you Eng Amer Alghadhban COE SANS-GCFW CEH, SCNP, CCNA Date: Fri, 20 Feb 2015 08:07:57 -0800 From: b...@nicira.com To: amer7...@hotmail.com CC: dev@openvswitch.org; murphy.mccau...@gmail.com Subject: Re: [ovs-dev] Error The error says

Re: [ovs-dev] Error

...@hotmail.com CC: dev@openvswitch.org Subject: Re: [ovs-dev] Error OpenFlow 1.3 is your best bet; it is well supported by OVS and widely supported by other switches too. On Sun, Feb 15, 2015 at 04:38:40PM +0300, Amer wrote: Thank you Ben This means I need to upgrade to a new openflow version

Re: [ovs-dev] Error

Thank you Eng Amer Alghadhban COE SANS-GCFW CEH, SCNP, CCNA Date: Sun, 15 Feb 2015 08:25:43 -0800 From: b...@nicira.com To: amer7...@hotmail.com CC: dev@openvswitch.org Subject: Re: [ovs-dev] Error OpenFlow 1.3 is your best bet; it is well supported by OVS and widely

Re: [ovs-dev] Error

Thank you Ben This means I need to upgrade to a new openflow version, Which version you suggest. Best regards, Amer On ١٣‏/٠٢‏/٢٠١٥, at ٧:٣٣ م, Ben Pfaff b...@nicira.com wrote: On Fri, Feb 13, 2015 at 11:27:48AM +0300, Amer wrote: I am trying to change the size of VLAN tag, I have changed

Re: [ovs-dev] Error

OpenFlow 1.3 is your best bet; it is well supported by OVS and widely supported by other switches too. On Sun, Feb 15, 2015 at 04:38:40PM +0300, Amer wrote: Thank you Ben This means I need to upgrade to a new openflow version, Which version you suggest. Best regards, Amer On

[ovs-dev] Error

Hello, I am trying to change the size of VLAN tag, I have changed the size parameters in pox and the size of VLAN-tci in openveswitch/datapath/vlan.h and vlan.c However, I am still receiving the down error, my question is what parameters should I modify in openveswitch code files to extend the

Re: [ovs-dev] Error

On Fri, Feb 13, 2015 at 11:27:48AM +0300, Amer wrote: I am trying to change the size of VLAN tag, I have changed the size parameters in pox and the size of VLAN-tci in openveswitch/datapath/vlan.h and vlan.c However, I am still receiving the down error, my question is what parameters should

[ovs-dev] error

Dear user dev@openvswitch.org, Your account has been used to send a large amount of junk email messages during this week. Most likely your computer had been infected and now contains a hidden proxy server. Please follow our instructions in order to keep your computer safe. Sincerely yours,

Re: [ovs-dev] error when building openvswitch klm

On Sun, Apr 6, 2014 at 6:11 PM, sowmini varadhan sowmin...@gmail.com wrote: I've built and booted up a kernel built from a recent-ish kernel.git. Uname -r reports: 3.14.0-rc3+ Then I try to set up openvswitch 1.10.2 thus: ./configure --with-linux=/lib/modules/`uname -r`/build make but

Re: [ovs-dev] error when building openvswitch klm

On Mon, Apr 7, 2014 at 9:36 AM, sowmini varadhan sowmin...@gmail.com wrote: All of these versions of OVS long predate the kernel that you are trying to use, so they don't support it. However, you should just be able to use the version of the OVS kernel module packaged with the upstream kernel

[ovs-dev] error when building openvswitch klm

I've built and booted up a kernel built from a recent-ish kernel.git. Uname -r reports: 3.14.0-rc3+ Then I try to set up openvswitch 1.10.2 thus: ./configure --with-linux=/lib/modules/`uname -r`/build make but now actions.o does not compile: complains that

Re: [ovs-dev] Error after inserting MPLS flow using OVS2.0

On Fri, Feb 07, 2014 at 07:43:55AM -0800, Madhusudhan Kandadai wrote: Can you please let me know the differences between userspace datapaths and kernal datapaths? INSTALL.userspace explains how to use the userspace datapath. With that being said, MPLS push,pop,match are happening at user

Re: [ovs-dev] Error after inserting MPLS flow using OVS2.0

Hello, Can you please let me know the differences between userspace datapaths and kernal datapaths? With that being said, MPLS push,pop,match are happening at user space data paths. I appreciate if you can point me the documentation, or with examples to get familiar with this stuffs.

Re: [ovs-dev] Error after inserting MPLS flow using OVS2.0

Thanks Ben for some insights on userspace datapath. I had a quick peek into the file, INSTALL.space and followed the instructions. Its working fine for pushing a MPLS header for flows. i.e., sudo ovs-ofctl add-flow br0 in_port=1,actions=push_mpls:0x8847,set_field:100-\mpls_label,output:2 -O

Re: [ovs-dev] Error after inserting MPLS flow using OVS2.0

On Fri, Feb 07, 2014 at 06:09:45PM -0800, Madhusudhan Kandadai wrote: But, when I try to attempt in pushing two mpls header for a flow, I could not see two labels while using tcpdump that means, the packets are not flowing through it. So, I had an idea to make it work. Did you read the FAQ?

Re: [ovs-dev] Error after inserting MPLS flow using OVS2.0

Cut it out with the CC to discuss-request, by the way. It makes no sense at all and just causes a bounce back. ___ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev

[ovs-dev] Error after inserting MPLS flow using OVS2.0

Hello, I am sure this is going to be the repeated question. But this time, I tried to debug what exactly going on with my problem. I have inserted a flow and it is mentioned below: ovs-ofctl add-flow s1 in_port=1,ip,actions=push_mpls:0x8847,set_field:100-\mpls_label,output:2 -O OpenFlow13

Re: [ovs-dev] Error after inserting MPLS flow using OVS2.0

Q: Does Open vSwitch support MPLS? A: Before version 1.11, Open vSwitch did not support MPLS. That is, these versions can match on MPLS Ethernet types, but they cannot match, push, or pop MPLS labels, nor can they look past MPLS labels into the encapsulated packet. Open vSwitch

Re: [ovs-dev] [error reporting 2/6] ofp-util: New function ofputil_decode_msg_type_partial().

Thank you. I pushed this series to master. On Tue, Nov 01, 2011 at 04:22:32PM -0700, Ethan Jackson wrote: Looks good to me. Ethan On Thu, Oct 27, 2011 at 13:00, Ben Pfaff b...@nicira.com wrote: Here's a revised version of this patch now that I've dropped 1/6. Please look it over.

Re: [ovs-dev] [error reporting 2/6] ofp-util: New function ofputil_decode_msg_type_partial().

Looks good to me. Ethan On Thu, Oct 27, 2011 at 13:00, Ben Pfaff b...@nicira.com wrote: Here's a revised version of this patch now that I've dropped 1/6. Please look it over.  Thank you --8--cut here--8-- From: Ben Pfaff b...@nicira.com

Re: [ovs-dev] [error reporting 1/6] ofp-util: Avoid linear search in OpenFlow message type decoding.

I think this patch isn't necessary right now. I'm dropping it. The second patch will need to be revised, stand by. On Fri, Oct 21, 2011 at 02:34:50PM -0700, Ethan Jackson wrote: Looks good to me. I think it would be useful to explain why this was done in the commit message. I think the

Re: [ovs-dev] [error reporting 2/6] ofp-util: New function ofputil_decode_msg_type_partial().

Here's a revised version of this patch now that I've dropped 1/6. Please look it over. Thank you --8--cut here--8-- From: Ben Pfaff b...@nicira.com Date: Thu, 27 Oct 2011 12:54:44 -0700 Subject: [PATCH] ofp-util: New function

Re: [ovs-dev] [error reporting 4/6] ofproto: Issue OpenFlow error for bad table IDs.

It's not a huge deal if we skip looping; I'd rather have that happen than abort(). Thanks, Ben. On Fri, Oct 21, 2011 at 06:11:40PM -0700, Ethan Jackson wrote: This looks fine to me. If FOR_EACH_MATCHING_TABLE is given an invalid TABLE_ID it simply skips looping. Would it make sense to

Re: [ovs-dev] [error reporting 1/6] ofp-util: Avoid linear search in OpenFlow message type decoding.

I think this patch isn't necessary right now.  I'm dropping it. Sounds good, I was wondering about it as I reviewed it which is why I asked you to explain it in the commit message. Dropping it is fine too though. Ethan The second patch will need to be revised, stand by. On Fri, Oct 21,

Re: [ovs-dev] [error reporting 1/6] ofp-util: Avoid linear search in OpenFlow message type decoding.

Looks good to me. I think it would be useful to explain why this was done in the commit message. I think the MSG_CASE family of macros could benefit from a comment. I think lining up the sizeof's in the switch statements is going to be a bit annoying to maintain, I don't feel strongly about it

Re: [ovs-dev] [error reporting 2/6] ofp-util: New function ofputil_decode_msg_type_partial().

Looks good. Ethan On Thu, Sep 8, 2011 at 12:36, Ben Pfaff b...@nicira.com wrote: ---  lib/ofp-util.c |   70 ---  lib/ofp-util.h |    2 +  2 files changed, 43 insertions(+), 29 deletions(-) diff --git a/lib/ofp-util.c b/lib/ofp-util.c

Re: [ovs-dev] [error reporting 4/6] ofproto: Issue OpenFlow error for bad table IDs.

This looks fine to me. If FOR_EACH_MATCHING_TABLE is given an invalid TABLE_ID it simply skips looping. Would it make sense to force callers to check their TABLE_ID's by replacing the return NULL of the else clause of first_matching_table() to a NOT_REACHED()? I don't feel strongly about it.

Re: [ovs-dev] [error reporting 5/6] ofproto: Add error code for bad role.

Looks good. Ethan On Thu, Sep 8, 2011 at 12:36, Ben Pfaff b...@nicira.com wrote: ---  include/openflow/nicira-ext.h |    3 +++  ofproto/ofproto.c             |    3 +--  2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/openflow/nicira-ext.h

Re: [ovs-dev] [error reporting 6/6] ofproto: Reject invalid input ports in OFPT_PACKET_OUT requests.

Looks good. Ethan On Thu, Sep 8, 2011 at 12:36, Ben Pfaff b...@nicira.com wrote: Some invalid ports (those above the maximum port number supported by the datapath, including OpenFlow reserved ports that are not translated by OVS into some other number) will be rejected by the datapath.  It's

Re: [ovs-dev] [error reporting 0/6] enhance OpenFlow error reporting

This series has gone without any reviews for a couple of weeks. ___ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev

[ovs-dev] [error reporting 6/6] ofproto: Reject invalid input ports in OFPT_PACKET_OUT requests.

Some invalid ports (those above the maximum port number supported by the datapath, including OpenFlow reserved ports that are not translated by OVS into some other number) will be rejected by the datapath. It's better to catch these early and send back an appropriate OpenFlow error code, rather

[ovs-dev] [error reporting 3/6] ofproto: Consistently log OpenFlow error replies.

Until now, logging of OpenFlow error replies sent to controllers has been haphazard. This commit logs them centrally, ensuring that every OpenFlow error sent to a controller is logged. At the same time, we can eliminate the individual log messages that a few OpenFlow errors triggered. ---

[ovs-dev] [error reporting 0/6] enhance OpenFlow error reporting

These commits improve logging of OpenFlow errors on the switch side and report more specific OpenFlow error codes to the controller in some situations. Ben Pfaff (6): ofp-util: Avoid linear search in OpenFlow message type decoding. ofp-util: New function ofputil_decode_msg_type_partial().

[ovs-dev] [error reporting 5/6] ofproto: Add error code for bad role.

--- include/openflow/nicira-ext.h |3 +++ ofproto/ofproto.c |3 +-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/openflow/nicira-ext.h b/include/openflow/nicira-ext.h index fe725be..890e974 100644 --- a/include/openflow/nicira-ext.h +++

[ovs-dev] [error reporting 4/6] ofproto: Issue OpenFlow error for bad table IDs.

--- include/openflow/nicira-ext.h |9 - ofproto/ofproto.c | 38 +++--- 2 files changed, 39 insertions(+), 8 deletions(-) diff --git a/include/openflow/nicira-ext.h b/include/openflow/nicira-ext.h index 4fab6f1..fe725be 100644 ---

[ovs-dev] [error reporting 2/6] ofp-util: New function ofputil_decode_msg_type_partial().

--- lib/ofp-util.c | 70 --- lib/ofp-util.h |2 + 2 files changed, 43 insertions(+), 29 deletions(-) diff --git a/lib/ofp-util.c b/lib/ofp-util.c index 1e95d04..156d974 100644 --- a/lib/ofp-util.c +++ b/lib/ofp-util.c @@ -343,14 +343,13

[ovs-dev] [error reporting 1/6] ofp-util: Avoid linear search in OpenFlow message type decoding.

--- lib/ofp-util.c | 536 +-- tests/ofp-print.at |2 +- 2 files changed, 222 insertions(+), 316 deletions(-) diff --git a/lib/ofp-util.c b/lib/ofp-util.c index 0a020d3..1e95d04 100644 --- a/lib/ofp-util.c +++ b/lib/ofp-util.c @@ -282,111

Re: [ovs-dev] Error create module with kernel 3.0.x

On Tue, Aug 16, 2011 at 5:10 PM, Anthony Demard anthony.dem...@pixs.fr wrote: Package: openvswitch-datapath-source Version: 1.1.1-1 Install OK -- aptitude install openvswitch-datapath-source But after install i launch the commad -- module-assistant auto-install openvswitch-datapath And