There's a lot of information online but people continue
to ask us whether they can trust online dru dt gstores. So we decided to
monitor the quality of the drugs offered at the most popular online pha xk
rmacies and according to the results ŤCan je adia gic nPha yo rmacyť
Replica
Rolex models of the latest Baselworld 2009
designs have just been launched on our replica sites.
These are the first run of the
2009 models with inner Rolex inscriptions and better bands and cases.
Only limited to 1000 pieces worldwide, they are expected to sell out within a
month.
Brows
Robert Love wrote:
> Hi,
>
> I rebased fcoe-next.git to the most recent scsi-misc and linux-2.6
> trees. I also committed Vasu's queue_depth ramp patches (mailed to
> linux-scsi) in the order that things were received on linux-scsi.
>
> I did have a few problems doing this exercise, b
fnic: Add FIP support to the fnic driver
Use libfcoe as a common FIP implementation with fcoe.
FIP or non-FIP mode is fully automatic if the firmware
supports and enables it.
Even if FIP is not supported, this uses libfcoe for the non-FIP
handling of FLOGI and its response.
The fnic driver needs to push the assigned FC_ID to firmware.
It currently does this by intercepting the FLOGI responses, and
in order to make that code more common with FIP and NPIV, it
makes more sense to wait until the local port has completely
handled the FLOGI or FDISC response. Also, when we
It's possible and harmless to get FLOGI timeouts
while in RESET state. Don't do a WARN_ON in that case.
Also, split out the other WARN_ONs in fc_lport_timeout, so
we can tell which one is hit by its line number.
Signed-off-by: Joe Eykholt
---
drivers/scsi/libfc/fc_lport.c |5 -
1 files
The fnic driver with FIP is reporting link up, even though it's down.
When the interface is shut down by the switch, we receive a clear
virtual link, and set the state reported to libfc as down, although
we still report it up. Clearly wrong. That causes the subsequent
link down event not to be r
FIP's fcoe_ctlr_recv() function was previously only called from
the soft IRQ in FCoE. It's not performance critical and is more
convenient for some drivers to call it from the IRQ level. Just
Change to use skb_queue()/dequeue() which uses spinlock_irqsave
instead of separate locking with _bh lock
Use scsi host number to identify debug messages.
Previously, no instance information was given, so if multiple
ports were active, it became confusing.
Signed-off-by: Joe Eykholt
---
drivers/scsi/fcoe/libfcoe.c | 47 ---
1 files changed, 26 insertions(+),
Allow FIP to be disabled by the driver for devices
that want to use libfcoe in non-FIP mode.
The driver merely sets the fcoe_ctlr mode to the state which
should be entered when the link comes up. The default is auto.
No change is needed for fcoe.c which uses auto mode.
Signed-off-by: Joe Eykholt
The following series makes changes to libfc and libfcoe to provide
FIP support for the fnic driver. The patch to the fnic driver will
be sent separately.
The fnic firmware may not support FIP, so a mode is added to libfcoe
to run solely in non-FIP mode.
The FIP debug messages are improved to inc
Hi,
I rebased fcoe-next.git to the most recent scsi-misc and linux-2.6
trees. I also committed Vasu's queue_depth ramp patches (mailed to
linux-scsi) in the order that things were received on linux-scsi.
I did have a few problems doing this exercise, but I've tested all
patches an
Fix minor errors.
A debug message said an RLIR was received instead of ECHO.
"Expected" was misspelled in several places.
Fix a type cast from u32 to __be32.
Rob, Some of these may have been also taken care of in your
other doc cleanup patch. Feel free to fold them in.
Signed-off-by: Joe Eykholt
Looking for treatments for erectile dysfunction most men surf the Web to
purchase me mfw ds without embarrassment. Online dru ct gstores are the best
way to order cheap me vod ds discreetly. All you need is to find a reliable dru
uau gstore.
Order online and forget all your worries and embarr
Si ce message ne s'ouvre pas correctement, vous pouvez l'ouvrir dans votre
navigateur en cliquant ici
Découvrez le nouveau Percolateur Lavazza EP-950
et toute la gamme des capsules
Lavazza Espresso Point et Lavazza Blue
Saisissez le code promo easy09 en bas de page "Votre panier"
et
Madame, Monsieur,
Dans un contexte économique difficile la maitrise des coûts reste essentielle.
A cet effet, EXTERNALLIANCE, vous propose une offre de « Gestion des Paies »
complète et à faible coût.
Une offre sur mesure qui vous assure tranq
Si vous souhaitez vous désabonner, recopiez cett
Ronnie Koch wrote:
> Joe,
>
> Sad (bad ?) news. I am "currently" not of much use in coding (last
> serious relevant coding in assembler with BSC and H/SDLC) but if there
> is anything I can do to help . (while the economy is slow).
Thanks for offering. I'll work on it myself sometime soon.
I
Thanks, something to play with tomorrow
Ronnie
On Tue, 2009-09-08 at 10:31 -0700, Robert Love wrote:
> On Tue, 2009-09-08 at 17:00 +0200, Ronnie Koch wrote:
> > Seems I am not the only one. This looks somewhat similar.
> >
> > http://www.opensolaris.org/jive/thread.jspa?threadID=112100
> >
>
On Fri, 2009-09-04 at 16:05 -0700, Joe Eykholt wrote:
> Robert Love wrote:
> > From: Rob Love
> >
> > Ensures that there are kernel-doc style comments for all
> > routines and structures.
> >
> > There were also a few instances of fc_lport's named 'lp'
> > which were switched to 'lport' as per t
Joe,
Sad (bad ?) news. I am "currently" not of much use in coding (last
serious relevant coding in assembler with BSC and H/SDLC) but if there
is anything I can do to help . (while the economy is slow).
Regards
Ronnie
On Tue, 2009-09-08 at 10:00 -0700, Joe Eykholt wrote:
> Ronnie Koch wr
On Mon, 2009-09-07 at 13:00 +0530, Ramesh Velusamy wrote:
> Hi Macarthor,
>
> The solution for this problem is as follows:
>
> Perform FCoE Target setup first and then FCoE Initiator setup. i.e.,
> Execute "fcconf ethx enable" command in FCoE Target, before executing "echo
> "ethX" > /sys/module/
On Tue, 2009-09-08 at 17:00 +0200, Ronnie Koch wrote:
> Seems I am not the only one. This looks somewhat similar.
>
> http://www.opensolaris.org/jive/thread.jspa?threadID=112100
>
> Ronnie
>
> On Tue, 2009-09-08 at 14:01 +0200, Ronnie Koch wrote:
> > Hi,
> >
> > At last I have a somewhat workin
Ronnie Koch wrote:
> Seems I am not the only one. This looks somewhat similar.
>
> http://www.opensolaris.org/jive/thread.jspa?threadID=112100
>
> Ronnie
>
> On Tue, 2009-09-08 at 14:01 +0200, Ronnie Koch wrote:
>> Hi,
>>
>> At last I have a somewhat working P-t-P testing environment. I got the
Seems I am not the only one. This looks somewhat similar.
http://www.opensolaris.org/jive/thread.jspa?threadID=112100
Ronnie
On Tue, 2009-09-08 at 14:01 +0200, Ronnie Koch wrote:
> Hi,
>
> At last I have a somewhat working P-t-P testing environment. I got the
> OpenSolaris FCoE target (and init
Hello!
Unfortunately we failed to deliver the postal package which was sent on the 4th
of June in time
because the recipient’s address is not correct.
Please print out the invoice copy attached and collect the package at our
department.
United Parcel Service of America
__
Hi,
At last I have a somewhat working P-t-P testing environment. I got the
OpenSolaris FCoE target (and initiator) and got that "working" (OS
initiator works with OS target - surprise :) so now I can start testing
my Ubuntu based Open-FCoE initiator.
The bottomline is I can not make it work :( I
26 matches
Mail list logo