On Fri, Nov 27, 2015 at 07:09:30PM +0100, David Caro wrote:
>
> I see though that is leaving a bunch of test interfaces in the slave:
>
>
> 2753: vdsmtest-gNhf3: mtu 1500 qdisc
> noqueue state UNKNOWN group default
> link/ether 86:73:13:4c:e2:63 brd ff:ff:ff:ff:ff:ff
> 2767: vdsmtest-aX5S
On Mon, Dec 07, 2015 at 12:15:37AM +0200, Nir Soffer wrote:
> Hi all,
>
> This is not the first time this test fails, but it is a rare failure.
>
> Anyone has a clue why it fails?
>
> According the captured log, all the ip runs are successful.
>
> Can it be an issue on specific slave?
>
> 21:2
On Sat, Dec 19, 2015 at 07:27:43PM +0100, Petr Horacek wrote:
> Hello,
>
> we have to backport https://gerrit.ovirt.org/#/c/46594/, reason is
> described there:
>
> "In CentOS, where Epoch is not used, >= 2 is interpreted as >= 0:2,
> that is causing dependency problems This patch changes it to >
On Mon, Dec 21, 2015 at 02:22:16PM +0200, Barak Korren wrote:
> >> I don't know what are the other jobs and what they are doing.
> >> Better remove them since nobody care about them anyway.
> >
> > ack
> >
> ...
> >> Nir
> >
> > Yaniv Bronhaim.
>
>
> Job disabled for now.
Please remove it - unle
On Tue, Dec 15, 2015 at 05:58:48PM +0200, Yaniv Bronheim wrote:
> Hi,
> We re-initiate vdsm sync meeting, you are all welcome to join and raise
> your patches, ideas and concerns. Or just listen and be updated with the
> plans .
> Joined: nsoffer, fromani, pkliczew, alitke, ybronhei
>
> 1. pioter
On Tue, Dec 22, 2015 at 09:59:20AM +0200, Barak Korren wrote:
> > Please remove it - unless you have plans to revert the
> > automation/*-based approach.
>
> Since I don't know who wrote it, and what useful bits of code may be
> hiding inside, I rather not make any irreversible changes while almos
On Wed, Jan 06, 2016 at 09:29:46AM +0200, Edward Haas wrote:
> Hi,
>
> Strange, the logging below shows the 'promisc on' commands was successful.
> Unfortunately, the logs/run/job archive is no longer available.
>
> The check itself is asymmetric: We set it using iproute2 (command) and
> read it
On Tue, Jan 05, 2016 at 03:17:54PM +0200, Eyal Edri wrote:
> same for http://jenkins.ovirt.org/job/vdsm_3.5_check-patch-fc22-x86_64/
>
>
> On Tue, Jan 5, 2016 at 2:56 PM, Eyal Edri wrote:
>
> > FYI,
> >
> > The vdsm job [1] has been failing for quite some time now, without any
> > resolution so
On Wed, Jan 20, 2016 at 03:45:12PM +0100, Fabian Deutsch wrote:
> Hey,
>
> recently I looked at how many (indirect) dependencies vdsm is pulling in.
> I did the comparisong using the Node Next squashfs image.
>
> What Node Next is doing, it uses the CentOS 7 @core group, and
> installs vdsm on-to
On Fri, Jan 22, 2016 at 12:08:16PM +0200, Nir Soffer wrote:
> On Fri, Jan 22, 2016 at 11:28 AM, Piotr Kliczewski
> wrote:
> > On Thu, Jan 21, 2016 at 5:02 PM, Milan Zamazal wrote:
> >> I work on inclusion of Vdsm into Debian. I don't know what are the
> >> reasons for having separate `infra', `x
On Wed, Jan 27, 2016 at 09:53:52AM +0200, Nir Soffer wrote:
>
> >
> > Also we should get rid of '/rhev/' in start of mount points IMO. How
> > about '/var/lib/ovirt-hostd/mounts/' or something like that?
>
> We want to use /run/ovirt-host/storage/ for that, but this is hard change,
> since it bre
(nir, piotr, danken)
- splitting supervdsmServer:
I think that its a good idea, and that https://gerrit.ovirt.org/#/c/52875/ is
a good start.
It would give a nice separation of responsibility, and may serve as a
"teaser" for how Vdsm's public API can be broken apart.
Nir is worried that
On Wed, Feb 17, 2016 at 08:59:20AM -0500, Martin Perina wrote:
> I think we have created a bug [1] for fencing related ipv6 support.
>
> Martin
>
> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1194055
>
> - Original Message -
> > From: "Eli Mesika"
> > To: "Yevgeny Zaspitsky"
> > Cc
On Wed, Feb 24, 2016 at 08:16:45AM -0500, Eli Mesika wrote:
> Hi Guys
>
> I am working on NGN
> I had installed a ovirt-node from ISO, it (by mistake) did not include the
> vdsm-cli package, so host-deploy failed on that
> Fabian asked me to install vdsm-cli manually using :
>
> yum --enable
On Wed, Feb 24, 2016 at 09:09:39AM -0500, Eli Mesika wrote:
> Attached
>
> - Original Message -
>
> > From: "Dan Kenigsberg" < dan...@redhat.com >
> > To: "Eli Mesika" < emes...@redhat.com >
> > Cc: "devel"
On Wed, Feb 24, 2016 at 03:36:36PM +0100, Fabian Deutsch wrote:
> On Wed, Feb 24, 2016 at 3:10 PM, Yaniv Bronheim wrote:
> > I suspect that it relates to the desire to remove the dependency in vdsm-cli
> > - https://gerrit.ovirt.org/#/c/53831/ which is not merged yet. and Fabian
>
> Moti and I di
On Wed, Feb 24, 2016 at 06:26:41PM +0200, Dan Kenigsberg wrote:
> On Wed, Feb 24, 2016 at 09:09:39AM -0500, Eli Mesika wrote:
> > Attached
> >
> > - Original Message -----
> >
> > > From: "Dan Kenigsberg" < dan...@redhat.com >
> >
On Wed, Feb 24, 2016 at 05:36:35PM +0100, Fabian Deutsch wrote:
> Hey,
>
> IIUIC host-deploy is currently installing some packages manually:
>
> https://gerrit.ovirt.org/gitweb?p=ovirt-host-deploy.git;a=blob;f=src/plugins/ovirt-host-deploy/vdsm/packages.py;hb=HEAD
>
> Can't these dependencies mo
On Fri, Mar 04, 2016 at 04:28:30AM -0500, Martin Perina wrote:
>
>
> - Original Message -
> > From: "Nir Soffer"
> > To: "Sandro Bonazzola" , "Francesco Romani"
> > , "Dan Kenigsberg"
> > , "Yaniv Bronheim&
Message -
> >> > From: "Yaniv Bronheim"
> >> > To: "Martin Perina"
> >> > Cc: "Nir Soffer" , "Sandro Bonazzola"
> >> > , "Francesco Romani"
> >> > , "Dan Kenigsberg" , "d
Functional tests are intended to verify that a running Vdsm instance
does what it should, when treated as a black box, over its public API.
They should be comprehensive and representative of a typical field usage
of Vdsm. It is a sin to break such a test - but we must be able to know
when such a s
On Thu, Apr 03, 2014 at 12:31:44PM -0400, Douglas Schilling Landgraf wrote:
> On 04/03/2014 11:08 AM, Dan Kenigsberg wrote:
> >Functional tests are intended to verify that a running Vdsm instance
> >does what it should, when treated as a black box, over its public API.
> &
On Fri, Apr 04, 2014 at 10:11:23AM +0200, Dave Neary wrote:
> Hi Dan,
>
> On 03/27/2014 10:32 AM, Dan Kenigsberg wrote:
> > I prefer keeping vdsm-devel intact. It's a different programming
> > language, with its different set of problems, unrelated profiling
> >
On Fri, Apr 04, 2014 at 04:28:29PM +0200, Sandro Bonazzola wrote:
> Il 01/04/2014 16:15, Sandro Bonazzola ha scritto:
> > Il 01/04/2014 15:38, ovirt-t...@arcor.de ha scritto:
> >> Hello,
> >>
> >> I'm new to this list and I need help installing a self hosted engine
> >>
> >> I've installed CentOS 6
On Sun, Apr 06, 2014 at 11:33:29AM +0300, Lior Vernia wrote:
> Hello all,
>
> Introducing the oVirt 3.5 feature of network custom properties:
> http://www.ovirt.org/Features/Network_Custom_Properties
>
> Essentially, this feature aims to solve two RFEs, that request the
> ability to set bridge an
On Sun, Apr 06, 2014 at 11:18:19AM +0300, ybronhei wrote:
> On 04/03/2014 07:31 PM, Douglas Schilling Landgraf wrote:
> >On 04/03/2014 11:08 AM, Dan Kenigsberg wrote:
> >>Functional tests are intended to verify that a running Vdsm instance
> >>does what it should, when t
On Sun, Apr 06, 2014 at 11:47:26PM -0400, Douglas Schilling Landgraf wrote:
> On 04/03/2014 12:24 PM, Dan Kenigsberg wrote:
> >On Thu, Apr 03, 2014 at 12:31:44PM -0400, Douglas Schilling Landgraf wrote:
> >>On 04/03/2014 11:08 AM, Dan Kenigsberg wrote:
> >>>Functiona
On Mon, Apr 07, 2014 at 09:00:14AM +0300, ybronhei wrote:
> On 04/07/2014 01:42 AM, Dan Kenigsberg wrote:
> >On Sun, Apr 06, 2014 at 11:18:19AM +0300, ybronhei wrote:
> >>On 04/03/2014 07:31 PM, Douglas Schilling Landgraf wrote:
> >>>On 04/03/2014 11:08 AM, Dan Keni
On Tue, Apr 08, 2014 at 06:52:50AM -0400, Francesco Romani wrote:
> Hello VDSM developers,
Please use devel@ovirt, and mention "vdsm" at the subject. This thread
in particular involves Engine as well.
>
> I'd like to discuss and explain the plans for cleaning up Vm.getStats()
> in vdsm/virt/vm.p
On Wed, Apr 09, 2014 at 01:11:22PM +0200, Michal Skrivanek wrote:
>
> On Apr 8, 2014, at 18:57 , Dan Kenigsberg wrote:
>
> > On Tue, Apr 08, 2014 at 06:52:50AM -0400, Francesco Romani wrote:
> >> Hello VDSM developers,
> >
> > Please use devel@ovirt, and
On Wed, Apr 02, 2014 at 09:29:09AM +0100, dan...@redhat.com wrote:
>
> - We had a very (too) heated debate about ignoring failures of
> setDomainRegularRole() in http://gerrit.ovirt.org/24495/ and
> http://gerrit.ovirt.org/25424.
>
> The pain point is that relying on domain role (master/reg
On Wed, Apr 09, 2014 at 02:32:57PM +0200, Michal Skrivanek wrote:
>
> On Apr 9, 2014, at 14:21 , Dan Kenigsberg wrote:
>
> > On Wed, Apr 09, 2014 at 01:11:22PM +0200, Michal Skrivanek wrote:
> >>
> >> On Apr 8, 2014, at 18:57 , Dan Kenigsberg wrote:
> >
On Thu, Apr 10, 2014 at 02:34:12AM -0400, Francesco Romani wrote:
>
> > >> When could we expect to have it running per commit on a Jenkins slaves?
> >
> > virt tests are running
> > There is a common initialization issue with VdsProxy at the moment, once
> > it's
> > fixed the virt tests can be
On Wed, Apr 09, 2014 at 08:40:24AM -0400, Francesco Romani wrote:
> - Original Message -
> > From: "Dan Kenigsberg"
> > To: "Francesco Romani"
> > Cc: "vdsm-devel" , devel@ovirt.org
> > Sent: Tuesday, April 8, 2014 6:57:15 PM
>
On Wed, Feb 26, 2014 at 11:14:33AM -0500, Saggi Mizrahi wrote:
> I've recently been introduced to the this feature and I was wondering is this
> really
> the correct way to go for solving this particular problem.
>
> My main issue is with making two unrelated flow dependent.
> By pushing this int
On Tue, Apr 29, 2014 at 03:17:23PM +0200, Vinzenz Feenstra wrote:
> Seems pretty much like it
>
> On 04/28/2014 12:30 PM, Piotr Kliczewski wrote:
> >Hello,
> >
> >I pulled the latest changes from master to test my code and during
> >getCaps I got:
> >
> >Thread-14::ERROR::2014-04-28
> >12:11:44,39
Few things mentioned on today's call:
- ovirt-3.3 is no longer supported: only security patches need to be merged
there.
- fenceSpmStorage turned into noop - intenetionally
- infra code is expected to move around to its own subdir, as warned 2
weeks ago.
- with pthreading used, any os.fork()
On Tue, Apr 22, 2014 at 02:54:29PM +0300, ybronhei wrote:
> hey,
>
> somehow we missed the summary of this call, and few "big" issues
> were raised there. so i would like to share it with all and hear
> more comments
>
> - task id in http header - allows engine to initiate calls with id
> instead
On Wed, Apr 30, 2014 at 09:41:40AM -0400, Piotr Kliczewski wrote:
> Adding to the discussion.
Your CC line was too huge. devel@ovirt.org should be used to such
discussions.
>
> Currently vdsm-xmlrpc rpm is required by vdsm and vdsm-cli rpms. Initially I
> suggested to have vdsm-jsonrpc required
On Wed, Apr 30, 2014 at 04:37:22PM +0300, ybronhei wrote:
> On 04/30/2014 04:22 PM, Dan Kenigsberg wrote:
> >On Tue, Apr 22, 2014 at 02:54:29PM +0300, ybronhei wrote:
> >>hey,
> >>
> >>somehow we missed the summary of this call, and few "big" issues
&
On Wed, Apr 30, 2014 at 07:57:32PM +0200, Vinzenz Feenstra wrote:
>
> Due to some confusion around how alternatives worked, I screwed up the
> list of packages here. I've updated it below. I'll give it a few
> more days before filing the actual bugs.
>
> On Wed, Apr 23, 2014 at 4:59 PM, Andrew
On Wed, Apr 30, 2014 at 11:18:05AM -0400, Brian Proffitt wrote:
> All:
>
> It has been requested that we add date/timestamps to the Features pages in
> order to highlight the age of each page and assist users in determining how
> fresh information is. After investigating various options to do th
On Wed, Apr 30, 2014 at 01:26:18PM -0400, Adam Litke wrote:
> On 30/04/14 14:22 +0100, Dan Kenigsberg wrote:
> >On Tue, Apr 22, 2014 at 02:54:29PM +0300, ybronhei wrote:
> >>hey,
> >>
> >>somehow we missed the summary of this call, and few "big" is
On Sun, May 04, 2014 at 05:06:06PM +0800, yao xu wrote:
> Hi Everyone!
>
> I am using ovirt-node 1.9.3 , vdsm 4.10. And I configure them well .
>
>But after I replace a net interface , that host will never connect to
> the storage server any more .
vdsm 4.10 is pretty old (ovirt-3.2), an
On Mon, May 05, 2014 at 09:55:58AM +, Sven Kieske wrote:
>
>
> Am 05.05.2014 10:35, schrieb Saggi Mizrahi:
> > I'd appreciate some karma.
> >
> > https://admin.fedoraproject.org/updates/ioprocess-0.3-1.fc20
>
> Hi,
>
> I hope you don't mind if I hijack the thread:
>
> Is taken care of thi
On Wed, May 07, 2014 at 11:44:02AM +0800, yao xu wrote:
> Ah..
>
> I replace a new netcard .But the old netcard's mac address is remembered by
> ovirt-node .(I can find the old netcard configure file in
> /var/lib/statelss/writable/etc/sysconfig/network-scripts/ )
>
> Thus when I reboot the machi
On Wed, May 07, 2014 at 09:56:03AM +0200, Jiri Moskovcak wrote:
> On 05/07/2014 09:28 AM, Nir Soffer wrote:
> >- Original Message -
> >>From: "Jiri Moskovcak"
> >>To: "Nir Soffer"
> >>Cc: devel@ovirt.org, "Federico Simoncelli" , "Allon
> >>Mureinik" , "Greg
> >>Padgett" , "Doron Fediuck"
On Wed, May 07, 2014 at 12:48:39PM -0400, Nir Soffer wrote:
>
> threading.Lock has a little known locked() method, documented in
> https://docs.python.org/2.6/library/thread.html#thread.lock.locked
>
> This method is not very useful, but since pthreading.Lock must be
> drop-in replacment for thre
On Thu, May 08, 2014 at 08:48:52AM -0400, Francesco Romani wrote:
>
> - Original Message -
> > From: "Xiao-Lei Shi (Bruce, HP Servers-PSC-CQ)"
> > To: "Dan Kenigsberg (dan...@redhat.com)" , "Francesco
> > Romani"
> > Cc:
On Fri, May 09, 2014 at 01:04:18PM +, Sven Kieske wrote:
> Hi,
>
> just found this in supervdsm.log:
>
> MainProcess|storageRefresh::DEBUG::2014-03-19
> 17:34:57,752::iscsi::390::Storage.Misc.excCmd::(forceScsiScan) '/bin/dd
> of=/sys/class/scsi_host/host0/scan' (cwd None)
> MainProcess|stora
On Fri, May 09, 2014 at 01:16:07PM +, Sven Kieske wrote:
> Hi,
>
> I just stumbled upon a defunct supervdsm process:
>
> root 2824 2815 0 Apr04 ?00:01:01 /usr/bin/python
> /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock
> --pidfile /var/run/vdsm/supervdsmd.p
On Fri, May 09, 2014 at 02:39:29PM +, Sven Kieske wrote:
> I don't see anything in supervdsm.log
Still, I believe that the bug is worth reopening - it's a process leak,
and it should be avoided. I believe that it can be easily solved by
adding zombiereaper to supervdsm.
>
> just one error at
On Wed, May 07, 2014 at 02:16:34PM +0200, Jiri Moskovcak wrote:
> On 05/07/2014 11:37 AM, Dan Kenigsberg wrote:
> >On Wed, May 07, 2014 at 09:56:03AM +0200, Jiri Moskovcak wrote:
> >>On 05/07/2014 09:28 AM, Nir Soffer wrote:
> >>>- Original Message -
> >
On Mon, May 12, 2014 at 01:26:33PM +0200, Jiri Moskovcak wrote:
> On 05/12/2014 11:22 AM, Dan Kenigsberg wrote:
> >On Wed, May 07, 2014 at 02:16:34PM +0200, Jiri Moskovcak wrote:
> >>On 05/07/2014 11:37 AM, Dan Kenigsberg wrote:
> >>>On Wed, May 07, 2014 at 09:56:03
On Mon, May 12, 2014 at 02:04:05PM +0200, Jiri Moskovcak wrote:
> >>>Jiri, could you describe why you keep your LV active, but not open?
> >>>
> >>
> >>- the setup flow goes approximately like this:
> >>
> >>1. create the LVs for the hosted-engine
> >>2. install the engine into the VM
> >>3. add t
On Tue, May 13, 2014 at 06:59:33AM -0400, Yoav Kleinberger wrote:
> Hi all,
>
> This idea was born from this bug: https://bugzilla.redhat.com/730619
>
> If, for example, creating a new storage domain
> fails because there's no space left, the user gets:
>
> "Error creating a storag
On Tue, May 13, 2014 at 08:31:16AM -0400, Yoav Kleinberger wrote:
> Hi Dan,
> A few points:
>
> 1. I explained the problem using the existing "message" field. An old VDSM
> will have the "meaningless" messages, and when working with a new engine they
> will be displayed to the user.
As I have s
On Tue, May 13, 2014 at 05:22:15PM -0300, Amador Pahim wrote:
> Building vdsm/master in F20, I've got:
>
> ./vdsm/virt/migration.py:223:19: E225 missing whitespace around operator
>
> In vdsm/virt/migration.py:
>
> 218 e.err = (libvirt.VIR_ERR_OPERATION_ABORTED, # error code$
> 219
On Wed, May 14, 2014 at 04:33:13PM +0200, Matthias Runge wrote:
> On Tue, May 13, 2014 at 06:15:31PM -0300, Amador Pahim wrote:
> > >>
> > >> I'm using python-pep8-1.5.4-1.fc20.noarch
> > >
> > > It seems like a bug in pep8 tool, and I see that it does not reproduce
> > > with v1.5.6 thereof.
> > >
On Thu, May 15, 2014 at 05:21:48PM +0200, Matthias Runge wrote:
> On Thu, May 15, 2014 at 10:15:33AM +0100, Dan Kenigsberg wrote:
> > > This update is pushed to updates-testing (for f20), though due the system
> > > maintenance currently running, there was no mail sent abo
On Wed, May 21, 2014 at 11:33:13AM +0200, Sandro Bonazzola wrote:
> Il 21/05/2014 11:08, Sven Kieske ha scritto:
> > Hi,
> >
> > and thanks for the list with the open bugs.
> >
> > Here are my proposed blockers (I won't add
> > them directly without dev agreement)
> > The list is not ordered in a
On Sun, May 25, 2014 at 10:29:26AM -0400, Kobi Ianko wrote:
>
>
> - Original Message -
> > From: "Antoni Segura Puimedon"
> > To: "Kobi Ianko"
> > Sent: Sunday, May 25, 2014 4:12:39 PM
> > Subject: Re: [ovirt-devel] running VDSM local tests
> >
> >
> >
> > - Original Message
On Sun, May 25, 2014 at 04:46:40AM -0400, Kobi Ianko wrote:
> changed /usr/share/vdsm/dsaversion.py
> solved the issue
>
> 10x Oved!!
Please note that vdsm 4.15 does not have all the APIs expected for
clusterLevel 3.5. Hence, it should not expose this clusterLevel yet.
For research and developeme
On Mon, May 26, 2014 at 07:58:03AM -0400, Vered Volansky wrote:
>
>
> - Forwarded Message -
> > From: "Vered Volansky"
> > To: "infra"
> > Sent: Monday, May 26, 2014 1:53:02 PM
> > Subject: Storage Functional Tests.
> >
> > CI job vdsm_master_storage_functional_tests_localfs_gerrit is
On Thu, May 22, 2014 at 01:42:55PM -0400, Federico Simoncelli wrote:
> - Original Message -
> > From: "Adam Litke"
> > To: "Dan Kenigsberg"
> > Cc: devel@ovirt.org, "Federico Simoncelli" , "Greg
> > Padgett"
> &
On Tue, May 27, 2014 at 02:23:45PM +0100, Dan Kenigsberg wrote:
> On Thu, May 22, 2014 at 01:42:55PM -0400, Federico Simoncelli wrote:
>
> Francesco, you cannot answer with +1 to an question with an exclusive or
> ;-)
Argh, sorry Francesco/Federico for th
On Tue, May 27, 2014 at 01:10:22PM -0400, Kobi Ianko wrote:
> Hi All,
> In the upcoming changes we have decided to use the Metadata section of
> libvirt to store temporary data. (see
> http://libvirt.org/html/libvirt-libvirt.html#virDomainGetMetadata)
> For that the libvirt api forces us to speci
On Wed, May 28, 2014 at 08:58:33AM -0400, Kobi Ianko wrote:
>
>
> - Original Message -
> > From: "Doron Fediuck"
> > To: "Kobi Ianko"
> > Cc: devel@ovirt.org
> > Sent: Wednesday, May 28, 2014 3:06:44 PM
> > Subject: Re: [ovirt-devel] discussion: URI format for libvirt metadata
> >
> >
On Thu, May 29, 2014 at 09:10:59AM -0400, Doron Fediuck wrote:
>
>
> - Original Message -
> > From: "Livnat Peer"
> > To: "Doron Fediuck"
> > Cc: bo...@ovirt.org, devel@ovirt.org
> > Sent: Thursday, May 29, 2014 4:05:45 PM
> > Subject: Re: 3.5 Time-frame: pushing feature freeze
> >
> >
On Thu, May 29, 2014 at 10:49:55AM -0400, Doron Fediuck wrote:
>
>
> - Original Message -
> > From: "Dan Kenigsberg"
> > To: "Doron Fediuck"
> > Cc: "Livnat Peer" , bo...@ovirt.org, devel@ovirt.org
> > Sent: Thursday,
I've used the occasion of http://wiki.xen.org/wiki/Hackathon/May2014 to
learn how Xen is managed, and to start scoping how it can be done within
oVirt.
I've laid out my impressions on http://www.ovirt.org/Xen; some of it
may false. For example, up until few minutes ago, it stated that Xen is
missi
On Thu, Jun 05, 2014 at 02:35:01PM +0200, Piotr Kliczewski wrote:
> Hi all,
>
> I would like to see whether there are any suggestions how we can
> provide information like:
> - lastClient
> - lastClientIface - network interface on which client connected
>
> In the code prior to jsonrpc changes ev
On Fri, Jun 06, 2014 at 09:19:11AM +0200, Piotr Kliczewski wrote:
> All,
>
> I pulled the latest vdsm from master and noticed that build is failing.
>
> Here is the patch that causes the failuer:
>
> http://gerrit.ovirt.org/#/c/28226
>
> and looking at jenkins comments I can see that jenkins wa
On Mon, Jun 16, 2014 at 11:19:27AM +0200, Vinzenz Feenstra wrote:
> On 06/15/2014 03:40 PM, Eyal Edri wrote:
> >why not use gerrit.ovirt.org and mirror to github?
> +1
+1 from me too; I find gerrit review for pthreading and friends helpful
(and good for the ovirt "brand").
_
On Tue, Jun 17, 2014 at 03:20:58AM -0400, Nir Soffer wrote:
> Hi all,
>
> I have few easy to review patches adding useful features to vdsm profiler.
>
> Please review:
> - http://gerrit.ovirt.org/27786 profile: Test profile decorator format
> - http://gerrit.ovirt.org/27787 profile: Support yappi
On Tue, Jun 10, 2014 at 10:43:36AM -0400, Martin Polednik wrote:
> Hello
>
> I'm writing in order to propose a change to faqemu hook as indicated in [1],
> modifying the hook's default behavior:
>
> There are currently hardcoded x86_64 and PPC memory limits (20480 and 262144),
> this change would
On Wed, Jun 18, 2014 at 08:21:28AM +, Sven Kieske wrote:
> I just
> wrote to this bugreport to get things going.
>
> why isn't it fixed yet? what does block this?
> can I do anything to speed things up?
Does the suggested patch http://gerrit.ovirt.org/#/c/27627/ solves the
problem and does no
On Wed, Jun 18, 2014 at 09:20:06AM +, Sven Kieske wrote:
>
>
> Am 18.06.2014 11:05, schrieb Dan Kenigsberg:
> >
> > Does the suggested patch http://gerrit.ovirt.org/#/c/27627/ solves the
> > problem and does not introduce new ones? If so, please mark it as
>
On Wed, Jun 18, 2014 at 09:38:05PM +0300, Itamar Heim wrote:
> On 06/18/2014 03:14 PM, Sven Kieske wrote:
> >Hi,
> >
> >I'd like to hear some opinions on
> >backporting this patch back to 3.5 or 3.4:
>
> but the bug below current target version is 3.6.0?
> (so lets start by asking it to make 3.5.0
On Fri, Jun 20, 2014 at 08:41:21AM +, Sven Kieske wrote:
> Hi,
>
> please consider this bugreport:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=520
>
> it is about the default fencing behaviour of ovirt
> in the special case of a single node cluster when
> a logical network marked as
On Fri, Jun 20, 2014 at 09:53:24AM +, Sven Kieske wrote:
>
>
> Am 20.06.2014 11:34, schrieb Dan Kenigsberg:
> >
> > I do not quite understand the problem you describe.
>
> See below, I hope this clears some things up.
>
> > Does the problem go away if y
On Fri, Jun 20, 2014 at 10:00:43PM +1000, Yuko Katabami wrote:
> Hello,
>
> Our French translator is taking her PTO from mid next week and I would like
> to ask your help in resolving the remaining questions that are not answered
> yet before she will be away.
> I am adding a new comment to each r
It's a bit confusing, but this is not a task for infra@ovirt, but for
the the similarly-named but utterly different team of ovirt developers,
who prefer patches to be sent as pull requests to
https://github.com/ovirt-infra/cpopen
On Mon, Jun 23, 2014 at 05:19:01AM -0400, Francesco Romani wrote:
>
On Tue, Jun 17, 2014 at 11:09:26PM +0100, Dan Kenigsberg wrote:
> On Tue, Jun 10, 2014 at 10:43:36AM -0400, Martin Polednik wrote:
> > Hello
> >
> > I'm writing in order to propose a change to faqemu hook as indicated in [1],
> > modifying the hook's default b
On Tue, Jun 24, 2014 at 08:33:00AM -0400, Yeela Kaplan wrote:
> Hi,
> There's a new dependency for vdsm: python-ioprocess.
> We also need to build ioprocess for debian.
>
> Do you know who can be helping with that or what's the process?
ZhengSheng, maybe you can help us here?
We have discussed the following matters. , I had very bad sound quality,
so please follow up on this message with things that I have missed.
3.5 features
- https://admin.fedoraproject.org/updates/FEDORA-EPEL-2014-1683/mom-0.4.1-1.el6
is deemed unstable (but is required by vdsm)
- La
501 - 586 of 586 matches
Mail list logo
