Hi Joel,
On 06/26/2013 05:28 AM, Joel A Fernandes wrote:
On Tue, Jun 25, 2013 at 8:23 PM, Joel A Fernandes joelag...@ti.com wrote:
From: Joel A Fernandes agnel.j...@gmail.com
This series is fixes to get MMC working on AM33XX without HWMOD data.
On removal of HWMOD data, interrupt and
Hi Florian,
On 06/19/2013 04:28 AM, Florian Vaussard wrote:
Hello Benoit,
On 06/12/2013 06:18 PM, Cousson, Benoit wrote:
Hi Florian,
On 6/12/2013 8:42 AM, Florian Vaussard wrote:
Hello Grant,
On 06/11/2013 11:57 PM, Grant Likely wrote:
On Tue, 11 Jun 2013 16:50:50 +0200, Florian Vaussard
On 06/19/2013 04:29 AM, Florian Vaussard wrote:
Hello Benoit,
Any comments on this series?
That series looks good to me. I've just applied it.
Thanks,
Benoit
Regards,
Florian
On 06/11/2013 04:49 PM, Florian Vaussard wrote:
Hello,
This series performs several updates to omap3-overo and
On 06/19/2013 12:53 AM, Mugunthan V N wrote:
On 6/7/2013 5:02 PM, Mugunthan V N wrote:
Add pinmux DT nodes to CPSW for the following AM335x boards
* AM335x Beaglebone
* AM335x EVM
* AM335x EVMsk
default state contains the pinmux required for active mode and
sleep mode contains pinmux reset
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode
...@atomide.com
Cc: Russell King li...@arm.linux.org.uk
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
Signed-off-by: J Keerthy j-keer...@ti.com
Signed-off-by: Benoit Cousson benoit.cous...@linaro.org
---
arch/arm/boot/dts/omap5.dtsi |9 +
1 file changed, 9 insertions(+)
diff --git
Hi Afzal,
On 06/14/2013 09:03 AM, Afzal Mohammed wrote:
Add AM43x ePOS EVM minimal DT source - this is a minimal one to get
it booting. Also include it in omap2plus dtbs and document bindings.
The hardware is under development.
Signed-off-by: Afzal Mohammed af...@ti.com
---
Hi Benoit,
This
On 06/19/2013 06:03 AM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson
Hi Tony,
On 06/19/2013 07:27 AM, Tony Lindgren wrote:
* Benoit Cousson b-cous...@ti.com [130619 03:17]:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
We have a similar issue with the MMC1 PBIAS. I think in the long run we
should expand regulator (and possibly pinctrl) framework(s) to handle
On 06/19/2013 09:05 AM, Roger Quadros wrote:
On 06/19/2013 03:23 PM, Benoit Cousson wrote:
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger
On 06/19/2013 09:05 AM, Roger Quadros wrote:
On 06/19/2013 03:23 PM, Benoit Cousson wrote:
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger
Hi Eduardo,
On 06/18/2013 03:16 PM, Eduardo Valentin wrote:
Benoit
On 07-06-2013 16:46, Eduardo Valentin wrote:
Include bandgap devices for OMAP4460 devices.
Cc: Benoît Cousson b-cous...@ti.com
Cc: Tony Lindgren t...@atomide.com
Cc: Russell King li...@arm.linux.org.uk
Cc:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.
Also provide pin multiplexer information for the USB host
pins.
Signed-off-by: Roger Quadros rog...@ti.com
---
Hi Keerthy,
On 06/10/2013 06:03 AM, J, KEERTHY wrote:
Hi Stephen,
Thanks for the review comments.
From: Stephen Warren [swar...@wwwdotorg.org]
Sent: Saturday, June 08, 2013 1:26 AM
To: J, KEERTHY
Cc: Cousson, Benoit;
Hi Sricharan,
On 06/06/2013 07:48 PM, Sricharan R wrote:
The uevm is the official board supported for the OMAP5 soc
in mainline. The uevm has an OMAP5432 with a DDR3 memory.
Renaming the board dts file and adding the following cleanups.
OK, so in fact you are not just renaming the board file,
On 06/06/2013 07:48 PM, Sricharan R wrote:
uevm is the official board supported for OMAP5 soc in the mainline.
This series renames the board dts file for OMAP5 accordingly and cleans
up the same. Also a few additional device DT entry updates are done.
This is on top of the below branch
Hi Keerthy,
On 06/07/2013 01:28 PM, J Keerthy wrote:
Adds palmas mfd and palmas regulator nodes. This is
based on the patch series:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89957.html
The device tree nodes are based on:
https://lkml.org/lkml/2013/6/6/25
It looks like
Thanks for the quick update.
I've just applied the series in my for_3.11/dts branch.
Regards,
Benoit
On 06/07/2013 03:22 PM, Sricharan R wrote:
uevm is the only official board supported for OMAP5 soc in the mainline.
This series deprecates the support for existent sevm which will no more
be
On 06/06/2013 07:28 AM, Mohammed, Afzal wrote:
Hi Benoit,
On Wed, Jun 05, 2013 at 18:19:00, Cousson, Benoit wrote:
+ Afzal,
Hi Vaibhav and Afzal,
Can someone test this series before I pull it. I still don't have any AM
board to do it myself :-(
Tested-by: Afzal Mohammed af...@ti.com
Hi Mugunthan,
On 06/05/2013 07:08 PM, Mugunthan V N wrote:
This patch series adds the following features
* Adding pinctrl PM support for CPSW and MDIO for Power Optimization
* Adding phy address to the CPSW node for EVMsk board
Changes from initial version
* Fixed the multiline function
+ Afzal,
Hi Vaibhav and Afzal,
Can someone test this series before I pull it. I still don't have any AM
board to do it myself :-(
In theory, it should be fine since Florian already checked the diff, but
just in case.
Thanks,
Benoit
On 06/03/2013 04:12 PM, Florian Vaussard wrote:
Hello,
Hi Afzal,
On 06/03/2013 09:49 AM, Mohammed, Afzal wrote:
Hi Benoit,
On Wed, May 29, 2013 at 19:05:35, Cousson, Benoit wrote:
And in this case, you do not introduce any new revision.
There is no point to update the binding each time we add a new SoC
variant that will contain the exact
Hi Suman,
On 06/01/2013 12:17 AM, Anna, Suman wrote:
Benoit, Tony,
On 04/17/2013 06:23 PM, Suman Anna wrote:
OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
The PWM capability property is missing from the node definitions of
couple of timers, and this has been fixed.
On 06/03/2013 03:19 PM, Afzal Mohammed wrote:
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
represented here are the minimal DT nodes necessary to get kernel
booting.
In DT nodes, ti,hwmod property has not been added, this would be
added along with PRCM support for
Hi Dan,
On 05/31/2013 05:44 PM, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the respective
Hi Dan,
On 05/31/2013 06:12 PM, Florian Vaussard wrote:
Hello Dan,
On 05/31/2013 05:45 PM, Dan Murphy wrote:
Update the dt property ti,audpwron-gpio to use the
gpio macro definition for GPIO_ACTIVE_HIGH.
Signed-off-by: Dan Murphy dmur...@ti.com
---
Hi Tony,
On 05/31/2013 03:23 PM, Benoit Cousson wrote:
Hi Tony,
Please pull two DTS fixes for the next -rc.
Please ignore that one. I'll send a new one with one more fix ASAP.
Thanks,
Benoit
Thanks,
Benoit
The following changes since commit e4aa937ec75df0eea0bee03bffa3303ad36c986b
Hi Tony,
Please pull three DTS fixes for the next -rc.
Thanks,
Benoit
The following changes since commit d683b96b072dc4680fc74964eca77e6a23d1fa6e:
Linus Torvalds (1):
Linux 3.10-rc4
are available in the git repository at:
Hi Florian,
On 05/31/2013 02:32 PM, Florian Vaussard wrote:
Hello,
Following a similar proposal by Stephen Warren for tegra [1], this series
makes use of the C preprocessor when compiling OMAP DT files, and
accomplishes some improvements to improve overall readability.
Patch 1 is a
Hi Tony,
Please pull two DTS fixes for the next -rc.
Thanks,
Benoit
The following changes since commit e4aa937ec75df0eea0bee03bffa3303ad36c986b:
Linus Torvalds (1):
Linux 3.10-rc3
are available in the git repository at:
Hi Dan,
On 05/29/2013 01:20 PM, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7clean
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the
On 05/31/2013 04:05 PM, Florian Vaussard wrote:
When making the dtbs target on OMAP/AM35xx, some trees are not
built.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
Thanks for the fix Florian.
I need to applied your AM series first to take that one otherwise the
am3517-evm will
Hi Pekon,
On 05/20/2013 06:44 AM, Gupta, Pekon wrote:
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = default;
- pinctrl-0 = matrix_keypad_s0 volume_keys_s0;
+ pinctrl-0 = matrix_keypad_s0 volume_keys_s0
+ nandflash_pins_s0;
Why add this to
On 05/30/2013 09:31 AM, Gupta, Pekon wrote:
Sorry, I missed that series.
I'm applying it right now.
No issues.. Please pick newer v4 versions of this series.
Following are rebased, updated and tested on linux-3.10-rc3
[PATCH v4,0/3] http://www.spinics.net/lists/linux-omap/msg91165.html
Hi Stephen,
On 05/29/2013 05:27 PM, Stephen Warren wrote:
On 05/29/2013 02:39 AM, Benoit Cousson wrote:
Hi Afzal,
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
Hi Jon,
On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote
Hi Afzal,
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
Hi Jon,
On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote:
ti,am335x-timer (applicable to AM335x devices)
ti,am335x-timer-1ms (applicable to
Salut Florian,
On 05/28/2013 10:41 AM, Florian Vaussard wrote:
On 05/27/2013 04:52 PM, Florian Vaussard wrote:
Hello,
Following a similar proposal by Stephen Warren for tegra [1], this series
makes use of the C preprocessor when compiling OMAP DT files, and
accomplishes some improvements
+ Florian
Hi Afzal,
On 05/27/2013 04:37 PM, Afzal Mohammed wrote:
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
represented here are the minimal DT nodes necessary to get kernel
booting.
In DT nodes, ti,hwmod property has not been added, this would be
added along with
On 05/29/2013 10:53 AM, Florian Vaussard wrote:
Hello Benoit,
On 05/29/2013 10:46 AM, Benoit Cousson wrote:
Salut Florian,
On 05/28/2013 10:41 AM, Florian Vaussard wrote:
On 05/27/2013 04:52 PM, Florian Vaussard wrote:
Hello,
Following a similar proposal by Stephen Warren for tegra [1
On 05/29/2013 11:58 AM, Mohammed, Afzal wrote:
Hi Benoit,
On Wed, May 29, 2013 at 14:09:18, Cousson, Benoit wrote:
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote:
If you are adding more
Hi Javier,
On 05/10/2013 09:40 PM, Javier Martinez Canillas wrote:
The IGEP COM Module has an 512MB NAND flash memory.
Add a device node for this NAND and its parition layout.
Signed-off-by: Javier Martinez Canillas javier.marti...@collabora.co.uk
---
Changes since v1:
- I just
+ new Jon's email address.
Hi Javier,
Sorry for the delay.
On 05/09/2013 12:37 AM, Javier Martinez Canillas wrote:
On Wed, Apr 17, 2013 at 6:32 PM, Javier Martinez Canillas
javier.marti...@collabora.co.uk wrote:
The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to
the OMAP3
On 05/27/2013 10:50 AM, Javier Martinez Canillas wrote:
On 05/27/2013 10:40 AM, Benoit Cousson wrote:
Hi Javier,
Hi Benoit,
On 05/10/2013 09:40 PM, Javier Martinez Canillas wrote:
The IGEP COM Module has an 512MB NAND flash memory.
Add a device node for this NAND and its parition
Hi Aaro,
On 05/22/2013 09:44 PM, Aaro Koskinen wrote:
Add minimal DT support for Nokia N950 N9. The basic boot works. I can
connect to both devices with USB networking ssh. dmesg output looks OK.
That's great! Tony will like that :-)
It is too bad I just have a N900 :-(
Functionality
Hi Eduardo,
On 05/15/2013 04:58 PM, Eduardo Valentin wrote:
Include bandgap devices for OMAP4460 devices.
Cc: Benoît Cousson b-cous...@ti.com
Cc: Tony Lindgren t...@atomide.com
Cc: Russell King li...@arm.linux.org.uk
Cc: linux-o...@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Hi Jon,
On 04/08/2013 03:17 AM, Jon Hunter wrote:
The GPMC timing properties for device-tree have been updated by adding
a -ns or -ps suffix to indicate the units of time the property
represents (as suggested by Rob Herring). Therefore, update the timing
property names for the OMAP3430 SDP
On 04/04/2013 08:38 PM, Tony Lindgren wrote:
* Jon Hunter jon-hun...@ti.com [130319 10:42]:
Includes:
- A couple fixes for DMTIMER context loss handling.
- Populating DMTIMER errata when booting with device-tree.
- A new function for requesting a DMTIMER by device-tree node.
Based upon
On 04/05/2013 08:26 AM, Santosh Shilimkar wrote:
On Thursday 04 April 2013 11:36 PM, Jon Hunter wrote:
The L3 interrupt numbers are incorrect for OMAP4+ and are conflicting
with some of the timer interrupts causing the allocation of timer
interrupts to fail.
The problem is caused by adding
Santosh and Jon,
On 04/05/2013 10:08 AM, Benoit Cousson wrote:
On 04/05/2013 08:26 AM, Santosh Shilimkar wrote:
On Thursday 04 April 2013 11:36 PM, Jon Hunter wrote:
The L3 interrupt numbers are incorrect for OMAP4+ and are conflicting
with some of the timer interrupts causing the allocation
Hi Nishanth,
The patches 1 to 6 looks good to me. Beside the pretty long Cc list,
that should not necessarily contain all the mailing list.
Since you are changing / renaming some DTS files, and to avoid any merge
conflict I will apply only these 6 patches.
DTS and driver changes are in theory
Hi Philip,
On 02/01/2013 06:37 AM, Philip Avinash wrote:
DT field of interrupts was mentioned wrongly as interrupt in SPI
node. This went unnoticed as spi-omap2 driver not making use of
interrupt. Fixes the typo.
Signed-off-by: Philip Avinash avinashphi...@ti.com
---
Hi Vaibhav,
The series looks good to me, but unfortunately does not apply cleanly on
top of the latest for_3.10/dts branch.
Could you rebase it?
Thanks,
Benoit
On 03/28/2013 07:42 AM, Vaibhav Hiremath wrote:
This patch series fixes the numbering schema for I2C and GPIO
module and adds the
On 03/28/2013 02:43 PM, Nishanth Menon wrote:
Hi Benoit,
On Thu, Mar 28, 2013 at 6:03 AM, Benoit Cousson b-cous...@ti.com wrote:
The patches 1 to 6 looks good to me. Beside the pretty long Cc list,
that should not necessarily contain all the mailing list.
Arrgh.. my bad. I will keep
Hi Tomi,
On 03/27/2013 09:45 AM, Tomi Valkeinen wrote:
omapdss driver uses a omapdss platform device to pass platform specific
function pointers and DSS hardware version from the arch code to the
driver. This device is needed also when booting with DT.
This patch adds omapdss_init_of()
Hi Tomi,
On 03/27/2013 09:45 AM, Tomi Valkeinen wrote:
Hi,
This is an RFC for OMAPDSS DT support. I've only added support for a few
boards
and a few DSS outputs, but they should give quite a good range of different
use
cases. If these work well, I think the rest of the outputs and
+ mturquette and Rajendra
On 03/27/2013 09:45 AM, Tomi Valkeinen wrote:
...
* ti,dsi-module-id
There's a ti,dsi-module-id property in the dsi node. The reason for this
module-id property is that we have muxes in the dss_core that route clocks
to/from a particular DSI module. So we need
that explained the opposite of what the patch was doing as
suggested by Benoit Cousson.
.../devicetree/bindings/gpio/gpio-omap.txt |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt
b/Documentation
On 03/26/2013 03:10 PM, Benoit Cousson wrote:
Hi Javier,
On 03/26/2013 10:33 AM, Javier Martinez Canillas wrote:
On Fri, Mar 15, 2013 at 2:31 PM, Javier Martinez Canillas
javier.marti...@collabora.co.uk wrote:
The binding documentation for the OMAP GPIO controller has the
#interrupt-cells
Hi Anil,
On 03/17/2013 10:35 AM, Anil Kumar wrote:
Hi Benoit,
On Fri, Mar 15, 2013 at 8:00 PM, Benoit Cousson b-cous...@ti.com wrote:
Hi Jon,
On 03/15/2013 02:57 PM, Jon Hunter wrote:
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP
Hi Anil,
On 03/17/2013 06:23 AM, Anil Kumar wrote:
Hi Benoit,
On Thu, Mar 7, 2013 at 12:21 PM, Benoit Cousson b-cous...@ti.com wrote:
Hi,
On 03/06/2013 06:53 PM, Tony Lindgren wrote:
* Anil Kumar anilk...@gmail.com [130305 18:40]:
Hi Tony,
From: linux-arm-kernel [mailto:linux-arm
Hi Kishon,
On 03/13/2013 10:11 AM, kishon wrote:
Benoit,
Will you be queuing this patch series?
I'm reviewing them right now.
Regards,
Benoit
Thanks
Kishon
On Thursday 07 March 2013 07:05 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device
+ Jon
Hi Kishon,
On 03/07/2013 02:35 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device functional in OMAP platforms.
All the patches deal with modifying arch/arm/boot except one which modifies
Documentation/../usb/omap-usb.txt
Changes from v2:
Hi Javier,
On 03/15/2013 01:18 PM, Javier Martinez Canillas wrote:
On Mon, Mar 4, 2013 at 9:56 PM, Javier Martinez Canillas
javier.marti...@collabora.co.uk wrote:
The binding documentation for the OMAP GPIO controller has the description
for the #interrupt-cells property after the
Hi Jon,
On 03/15/2013 02:57 PM, Jon Hunter wrote:
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.
This is based upon Benoit's
Salut Jon,
On 03/08/2013 06:27 PM, Jon Hunter wrote:
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.
This is based upon v3.9-rc1 and the
On 03/11/2013 06:56 PM, Jon Hunter wrote:
On 03/09/2013 06:42 AM, Ezequiel Garcia wrote:
On Fri, Mar 8, 2013 at 10:25 PM, Javier Martinez Canillas
jav...@dowhile0.org wrote:
On Fri, Mar 8, 2013 at 10:41 PM, Jon Hunter jon-hun...@ti.com wrote:
Yes you are correct. In general, I have been
On 03/14/2013 04:50 PM, Jon Hunter wrote:
On 03/14/2013 10:45 AM, Benoit Cousson wrote:
On 03/11/2013 06:56 PM, Jon Hunter wrote:
On 03/09/2013 06:42 AM, Ezequiel Garcia wrote:
On Fri, Mar 8, 2013 at 10:25 PM, Javier Martinez Canillas
jav...@dowhile0.org wrote:
On Fri, Mar 8, 2013 at 10
Hi Florian,
On 01/28/2013 06:54 PM, Florian Vaussard wrote:
Add device-tree support for the GPMC controller on the OMAP3.
Signed-off-by: Florian Vaussard florian.vauss...@epfl.ch
Applied and pushed.
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.10/dts
On 03/14/2013 04:59 PM, Jon Hunter wrote:
On 03/14/2013 10:45 AM, Florian Vaussard wrote:
Hi Benoit,
On 03/14/2013 03:57 PM, Benoit Cousson wrote:
Salut Jon,
On 03/08/2013 06:27 PM, Jon Hunter wrote:
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU
Hi Javier,
On 03/14/2013 05:02 PM, Javier Martinez Canillas wrote:
On Thu, Mar 14, 2013 at 3:57 PM, Benoit Cousson b-cous...@ti.com wrote:
Salut Jon,
On 03/08/2013 06:27 PM, Jon Hunter wrote:
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430
:16 PM, Matthias Brugger
matthias@gmail.com
wrote:
Hi Benoit,
2012/12/12 Benoit Cousson b-cous...@ti.com:
Hi Matthias,
On 12/12/2012 04:33 PM, Matthias Brugger wrote:
This patch is a follow-up patch for Javier Martinez effort adding
initial
device tree support to IGEP technology
Hi Sourav,
I've just applied your branch after a minor subject cleanup for consistency.
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.10/dts
Regards,
Benoit
On 03/11/2013 04:42 PM, Sourav Poddar wrote:
On Monday 11 March 2013 08:02 PM, Benoit Cousson wrote
+ Seb G.
Hi Jon,
How to you plan to merge that series?
Seb's just posted a McBSP adaptation to SDMA binding, so I'll have to
take this one before being able to merge any other SDMA driver
adaptation patches.
I'm fine to take that one, if you are OK, to avoid merge conflict in DTS
later.
On
Hi Roger,
On 03/12/2013 12:43 PM, Roger Quadros wrote:
Currently on OMAP, it is not possible to specify a clock consumer
to any of the OMAP generated clocks using the device tree. This can pose
a problem for external devices that run off an OMAP clock as we
can't reliably provide a reference
On 03/12/2013 06:07 AM, Santosh Shilimkar wrote:
On Tuesday 12 March 2013 04:35 AM, Nishanth Menon wrote:
commit 5553f9e (cpufreq: instantiate cpufreq-cpu0 as a platform_driver)
now forces platform device to be registered for allowing cpufreq-cpu0
to be used by SoCs. example:
On 03/12/2013 03:43 PM, Nishanth Menon wrote:
On 15:28-20130312, Benoit Cousson wrote:
On 03/12/2013 06:07 AM, Santosh Shilimkar wrote:
On Tuesday 12 March 2013 04:35 AM, Nishanth Menon wrote:
commit 5553f9e (cpufreq: instantiate cpufreq-cpu0 as a platform_driver)
now forces platform device
Hi Sourav,
On 03/11/2013 02:44 PM, Sourav Poddar wrote:
Hi Tony/Benoit,
These patches had been sent couple of times before, but there were no
comments on it.
Sorry for that. I got a big flu in Jan and was in Linaro Connect last week.
Patches look good, I just have to check that they apply
Hi,
On 03/06/2013 06:53 PM, Tony Lindgren wrote:
* Anil Kumar anilk...@gmail.com [130305 18:40]:
Hi Tony,
From: linux-arm-kernel [mailto:linux-arm-kernel-
boun...@lists.infradead.org] On Behalf Of Anil Kumar
Sent: Wednesday, February 27, 2013 8:03 AM
To:
+ Jon who was brave enough to take over the OMAP GPIO driver
+ New email address for Kevin since he is no longer at TI :-(.
- Tarun that left TI but I don't have his new email
Hi Linus,
On 02/28/2013 12:41 AM, Linus Walleij wrote:
On Wed, Feb 15, 2012 at 5:04 PM, Benoit Cousson b-cous
Hi Florian,
On 02/26/2013 05:07 PM, Florian Vaussard wrote:
Hi,
On 02/07/2013 08:58 AM, Peter Ujfalusi wrote:
Hi,
On 02/06/2013 02:30 PM, Benoit Cousson wrote:
So a patch is being merged to handle triggers in the case of pwm
leds [1].
When done, we will be able to add back the default
Salut Florian,
On 02/04/2013 10:14 AM, Florian Vaussard wrote:
Hello Benoit,
On 01/24/2013 01:21 PM, Benoit Cousson wrote:
+ Peter who did the original PWM
Hi Florian,
On 01/23/2013 06:56 PM, Florian Vaussard wrote:
Hello Benoit,
This patchset adds some new DT supports to the Overo
+ Peter who did the original PWM
Hi Florian,
On 01/23/2013 06:56 PM, Florian Vaussard wrote:
Hello Benoit,
This patchset adds some new DT supports to the Overo products.
The first patch converts the PMIC LEDB output to use the pwm-leds,
newly merged in your branch for_3.9/dts. The second
Hi Santosh,
On 01/23/2013 11:55 AM, Santosh Shilimkar wrote:
Looping Marc, Benoit
On Wednesday 23 January 2013 04:06 PM, Mark Rutland wrote:
On Tue, Jan 22, 2013 at 10:05:18PM +, Kukjin Kim wrote:
Mark Rutland wrote:
+ devicetree-discuss, Grant Likely, Rob Herring and Tony Lindgren
Hi Peter,
On 01/22/2013 11:11 AM, Peter Ujfalusi wrote:
Hi Benoit,
I have prepared for you a branch from where you can pull this set on top of
mainline v3.8-rc4:
Cool thanks,
I'll merged it in my branch.
Thanks,
Benoit
Regards,
Péter
---
The following changes since commit
Hi Peter,
Just one minor typo here.
On 01/18/2013 03:36 PM, Peter Ujfalusi wrote:
Enable support for the PWMs and LED as PWM drivers.
Signed-off-by: Peter Ujfalusi peter.ujfal...@ti.com
---
arch/arm/boot/dts/twl6030.dtsi | 12
1 file changed, 12 insertions(+)
diff --git
On 01/22/2013 11:49 AM, Peter Ujfalusi wrote:
HI Benoit,
On 01/22/2013 11:39 AM, Benoit Cousson wrote:
+
+ twl_pwm: pwm {
+ /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+ compatible = ti,twl6030-pwm;
+ #pwm-cells = 2;
+ };
+
+ twl_pwmled
Hi Jon,
On 12/17/2012 06:49 PM, Jon Hunter wrote:
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.
Please note that the node for OMAP4460 has been placed in a separate
header file for OMAP4460, because the node is not compatible with
OMAP4430. The node for OMAP4430 is not included
Hi Kishon,
On 01/10/2013 07:19 AM, kishon wrote:
On Friday 28 December 2012 12:05 AM, Aaro Koskinen wrote:
Hi,
On Thu, Sep 20, 2012 at 05:21:15AM +0200, Benoit Cousson wrote:
On 09/19/2012 11:32 AM, Kishon Vijay Abraham I wrote:
This patch series adds dt data to get MUSB working in omap4
On 01/10/2013 10:31 AM, kishon wrote:
Hi Benoit,
On Wednesday 19 September 2012 04:02 PM, Kishon Vijay Abraham I wrote:
Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
connected to ocp2scp, omap-usb2 dt data is added as a child node
of ocp2scp.
Acked-by: Felipe Balbi
Hi Anil,
On 11/14/2012 07:08 PM, AnilKumar Ch wrote:
This patch series adds d_can raminit support to c_can/d_can driver,
which is required to init/de-init D_CAN message RAM (holds message
objects). Added corresponding DT changes to get resource of RAMINIT
register and device instance.
Hi Anil,
On 01/02/2013 11:12 AM, AnilKumar, Chimata wrote:
On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote:
Rename I2C and GPIO nodes according to AM33XX TRM. According to
AM33XX TRM device instances are starting from 0 like i2c0, i2c1
and i2c3.
Signed-off-by: Pantelis Antoniou
Hi Jon,
On 12/14/2012 10:18 PM, Jon Hunter wrote:
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.
Please note that the node for OMAP4460 has been placed in a separate
header file for OMAP4460, because the node is not compatible with
OMAP4430.
But where is the omap4430 node then?
Hi Jon,
On 12/17/2012 04:58 PM, Jon Hunter wrote:
On 12/17/2012 02:16 AM, Benoit Cousson wrote:
Hi Jon,
On 12/14/2012 10:18 PM, Jon Hunter wrote:
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.
Please note that the node for OMAP4460 has been placed in a separate
header file
On 12/17/2012 05:58 PM, Jon Hunter wrote:
On 12/17/2012 10:38 AM, Mark Rutland wrote:
On Fri, Dec 14, 2012 at 09:26:37PM +, Jon Hunter wrote:
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.
Please note that the node for OMAP4460 has been placed in a separate
header file for
such as Flash storage and
Ethernet but support for these will also be included once the
OMAP GPMC device tree binding patches land on mainline.
This is a v3 of the patch-set that solves issues pointed out by
Enric Balletbo and Benoit Cousson.
The patch-set is composed of the following patches
Hi Matthias,
On 12/12/2012 04:33 PM, Matthias Brugger wrote:
This patch is a follow-up patch for Javier Martinez effort adding initial
device tree support to IGEP technology devices. [1]
It adds uart1 and uart2 bindings to the generic dtsi for the IGEP boards.
[1]
Hi Javier,
On 11/30/2012 11:08 AM, Javier Martinez Canillas wrote:
IGEP technology devices are TI OMAP3 SoC based industrial embedded
and computer-on-module boards. This patch-set adds initial device
tree support for these devices.
The device tree allows to boot from an MMC/SD and are
On 11/30/2012 11:08 AM, Javier Martinez Canillas wrote:
Add a generic .dtsi device tree source file for the
common characteristics across IGEP Technology devices.
Signed-off-by: Javier Martinez Canillas javier.marti...@collabora.co.uk
Acked-by: Matthias Brugger matthias@gmail.com
---
Hi Vaibhav,
On 11/26/2012 06:19 AM, Bedia, Vaibhav wrote:
On Fri, Nov 23, 2012 at 16:36:06, Philip, Avinash wrote:
On Tue, Nov 20, 2012 at 10:33:44, Philip, Avinash wrote:
As part of PWM subsystem integration, PWM subsystem are sharing
resources like clock across submodules (ECAP, EQEP
1 - 100 of 333 matches
Mail list logo
