Re: [e-smith-devinfo] Mail notification of SSH access

All, You might be interested in using logsentry from Psionic Technologies - see http://www.psionic.com/products/logsentry.html This will automatically log SSH and other activities - you get to choose what you want to show. This is GPL software, and works with portsentry to automatically log

Re: [e-smith-devinfo] Snort / Acid howto and contrib module - help required.

Ari, Trevor, Thank you! The install went without a hitch and I detected and recovered from a Code Red attack from a neighbor on my cable network within less than one minute! I have two systems on the net, and one has been using Psionic's logsentry and portsentry. I imagine that portsentry and

Re: [e-smith-devinfo] npulse network monitor Dynamic DNS

Damien, Darrell, Thanks for the info. Apparently, the version of perl is not my problem. Same as Darrell, I am at version 2.80 of CGI.pm, so I'll have to keep digging on this one. regards, Bruce Friedman - Original Message - From: Damien Curtain [EMAIL PROTECTED] To: [EMAIL PROTECTED]

Re: [e-smith-devinfo] npulse network monitor Dynamic DNS

upgrade (not CGI, but the base) is the cause of my problem as reported on horsburgh.com. Also, how can one tell which version of CGI.pm is installed? Thanks! Bruce Friedman - Original Message - From: robert [EMAIL PROTECTED] To: Bruce L. Friedman [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent

[e-smith-devinfo] npulse network monitor Dynamic DNS

Has anyone been able to configure this to work with dynamic DNS sites? It appears to map the name to the IP address once and save that rather than the host name you configure with. Also, I was unable to configure port monitoring on an SME system? It gave me a screen without any location to

RE: [e-smith-devinfo] /etc/cron.daily/tmpwatch:

Rob, I saw it too, you did not break anything. -Original Message- From: rob [mailto:[EMAIL PROTECTED]] Sent: Friday, October 26, 2001 6:42 AM To: [EMAIL PROTECTED] Subject: [e-smith-devinfo] /etc/cron.daily/tmpwatch: daily I've received this msg since upgrading to sme 5.0 blade 2:

RE: [e-smith-devinfo] samba 2.0.10-2 delay on file open/save dialog - Due to Open of My Documents folder on SME V5

Thanks Gordon. I think your word and that of Andrew Tridgell is what I would call authoritative on this matter. -Original Message- From: Gordon Rowell [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 18, 2001 12:46 AM To: Bruce L. Friedman; 'Greg Zartman'; [EMAIL PROTECTED] Subject

[e-smith-devinfo] samba 2.0.10-2 delay on file open/save dialog - Due to Open of My Documents folder on SME V5

Has anyone experienced this problem? Short story - opening My Documents folder located on home directory of user's samba share is delayed. I am seeing an approximate 10 second delay. I have captured the SMB packets using Ethereal and included them here (just at the point of delay). I have

[e-smith-devinfo] Server-Only Mode?

Can anyone offer some help in getting SME Server V5.0 working in server-only mode? I am behind a router, and thus only need server functionality. When I bring up the system after configuring it, eth0 is always down. I have tried the usual: ifconfig eth0 down; ifconfig eth0 up and it give me

[e-smith-devinfo] Samba Network Recycle Bin

-> [e-smith-devinfo] Samba Network Recycle Bin devinfo -- Thread -- -- Date -- Find [e-smith-devinfo] Samba Network Recycle Bin, Bruce L. Friedman -- Chronologi