except for the last number you put in .255. That will
include the whole subnet.
-Original Message-
From: Rob Wellesley [mailto:rob@;winux.co.nz]
Sent: Thursday, November 07, 2002 9:33 PM
To: [EMAIL PROTECTED]
Subject: RE: [e-smith-devinfo] (VPN IPSEC) - Not detecting remote
Windows
t with Ruff Dogs,
for helping me out on this issue.
-Original Message-
From: Rob Wellesley [mailto:rob@;winux.co.nz]
Sent: Wednesday, November 06, 2002 4:01 PM
To: [EMAIL PROTECTED]; Mitel Devinfo List
Subject: Re: [e-smith-devinfo] (VPN IPSEC) - Not detecting remote
Windows machines
&
"Jay (E-Smith List)" <[EMAIL PROTECTED]> said:
> I have two E-Smith machines at different locations. Both boxes are
> running SME v5.5 and I used the latest and greatest FreeS/WAN from
> www.myezserver.com I installed the rpm at both locations following the
> instructions in the HOW-TO that was
isn't a routable protocol, but what's the work around if
this is the issue.
-Original Message-
From: jwr [mailto:jwr] On Behalf Of James Robertson
Sent: Thursday, November 07, 2002 1:35 AM
To: [EMAIL PROTECTED]
Cc: Mitel Devinfo List
Subject: Re: [e-smith-devinfo] (VPN IPSEC)
On Wed, Nov 06, 2002 at 03:49:03PM -0700, "Jay (E-Smith List)" <[EMAIL PROTECTED]>
wrote:
> I was thinking along these lines too. In the IPSEC VPN section of the
> Server-Manager is offers a section where you can make the remote server
> the WINS server for the network. On the "client" server I
ge
network.
Justin.
> -Original Message-
> From: Jay (E-Smith List) [mailto:eslist@;jaydouglas.com]
> Sent: November 6, 2002 4:15 PM
> To: Mitel Devinfo List
> Subject: [e-smith-devinfo] (VPN IPSEC) - Not detecting remote
> Windows machines
>
>
> Greetings.
>
Windows networking of the "network neighbourhood" kind depends on
broadcast traffic from the master browser on the network.
I'm guessing this system isnt broadcasting traffic across the VPN.
I'm not 100% sure, but modifying the subnet mask on the windows machine
might work. The easy way is to edi
Greetings.
This group has been so helpful to me in the past, I was hoping that you
all could bail me out of another issue.
I have two E-Smith machines at different locations. Both boxes are
running SME v5.5 and I used the latest and greatest FreeS/WAN from
www.myezserver.com I installed the rpm
