Thats what I was thinking... I did manage to fix the issue though by swapping
radios - I am using my mobile Kenwood 2550A instead of the HT and it works fine
now. At some point I will probably try to track down the issue with using the
HT using both of your advice, thank you!
> Wouldn't it
Can someone tell me if this makes sense --
I had a RS 2m HT with a KPC-3 and was able to reasonably connect to 3 different
stations.
I switched out the radio and put in a Kenwood TR 2600 HT.
It is lower power (2.5 vs. 5 watts), but those stations still seem to be able
to hear me, and I can
I know this is not digital specific, but I am hoping someone can point me in
the right direction - I have a Kenwood TR-2550A mobile radio I purchased
used that I am using for APRS. It worked well at first, but I think it now
has an issue with the squelch.
It transmits fine and receives fine if I
Is it possible to run xastir (or some other similar aprs software service) on a
machine as a service/daemon, and use a different machine to connect to it to
view aprs maps?
I have an old very slow machine that should be good enough to do the
communications and data manipulation, but it is way t
I found a good source, my local Radio Shack!
About $1 higher than ordering online, but no shipping costs...
I thought of digikey or mouser, but what is the generic electronic part name
for it?
I have a aea pk-88 tnc and a kenwood radio, they both have the same 8 pin male
connector, so I need to buy some female 8 pin connectors and wire it up. Know
of any good cheap sources (online) or in MA?