I have been aware of n0an's trick for some time, but unless someone
can find a command that will invoke this with a simple macro, I find
it too much of a hassle do do frequently. I was never able to find a
command that would invoke A=B via HRD or Commander, so gave up.
On Fri, Jun 19, 2009 at 5
This note is for users of the TS-2000 who could use the ability to reduce Rx
bandwidth to as narrow as 50 hz.
Andy K3UK asks about mitigating the problem of a strong signal near your weaker
target signal. Phil points out IF DSP is better than AF DSP, but a technique
described by Hans N0AN will
bandwith down to zero ...
good dxing
dg9bfc
sigi
- Original Message -
From: "Charles Brabham"
To:
Sent: Friday, May 29, 2009 9:31 AM
Subject: Re: [digitalradio] Really beating the AGC issue with PSK ?
> A Phil pointed out, the only real fix is on the TX end - the transmitting
>
A Phil pointed out, the only real fix is on the TX end - the transmitting
station should be putting out a clean signal. Universal distribution of the
following info will help there.
Clean PSK signal:
Turn your power control to full power, Mic gain in its normal position for
SSB phone use, and s
PSK31: 100 Hz filter (not dsp unless the agc is generated before)
PSK250: 300 Hz filter. (see above).
A K3 can do it all with its superior dsp.
Rein PA0R
> -Ursprüngliche Nachricht-
> Von: "Andy obrien"
> Gesendet: 29.05.09 02:09:34
> An: digitalradio
> Betreff: [digitalradio] Really be
My Icom 746 suffers the same problem. I had hoped that the Elecraft K3
that I had in mind would solve this issue for me as well but maybe not. The
review in QST was the best they ever gave but maybe I hope for too much.
Rick - KH2DF
_
From: digitalradio@yahoogroups.com [mailto:
Andy obrien wrote:
> From time to time we have had discussions here about the problem with
> PSK (and other modes) when a strong stations appears to grab the
> waterfall and wipe out all the other stations within a 2-3 Khz range.
> Because of this phenomenon, when I purchased a new rig, I looked f
When I use MultiPSK, I make sure the mic input is high (say 30% - 50%)
then use MultiPSK's waterfall AGC which often shows the weaker signals
as well as the loud one. I also use the manual notch on the rig to help out.
73 Sholto
Andy obrien wrote:
>
>
>
> From time to time we have had disc
