pablolie wrote:
> Hi Michael -
>
> it's Win10 these days.
>
> Screenshots attached it just points to a github page.
>
> I am pretty sure I can find the SW if I really wanted too. :-)On Windows you
> can right click on the LMS icon on the taskbar and click
"Install update"
Sent from my P
it's Win10 these days.
Don't you get a notification from the tray icon when the update is ready
to be installed?
Screenshots attached it just points to a github page.
Well... that's what it does :-)
--
Michael
___
discuss mailing list
discu
Hi Michael -
it's Win10 these days.
Screenshots attached it just points to a github page.
I am pretty sure I can find the SW if I really wanted too. :-)
+---+
|Filename: Screenshot 2021-02-052.jpg
would be to run the sb into the lipa (which will control the sub as
intended) and try to run the "speaker out" of the lipa into the
satellites, or, if you have another speaker(s) handy, just to test. Then
control the volume from the lipa.
Continuing to think, you might have three gain stages in
chill wrote:
> In the past I've made the mistake of assuming that more power equals
> more gain. I'm no expert, but my understanding is that although more
> power would be needed to drive an amplifier that has more gain, for an
> amplifier that has a certain gain, more power simply allows for l
In the past I've made the mistake of assuming that more power equals
more gain. I'm no expert, but my understanding is that although more
power would be needed to drive an amplifier that has more gain, for an
amplifier that has a certain gain, more power simply allows for less
distortion. Too l
Heuer wrote:
> Here is the capacitor repair thread:
> https://forums.slimdevices.com/showthread.php?103213-Squeezebox-3-common-faults-over-time
>
> if you don't want to mess with the caps then you can use the digital
> output via a DAC to the amp. I use a Topping E30 but others have used
> the
Here is the capacitor repair thread:
https://forums.slimdevices.com/showthread.php?103213-Squeezebox-3-common-faults-over-time
if you don't want to mess with the caps then you can use the digital
output via a DAC to the amp. I use a Topping E30 but others have used
the Behringer DAC
https://www
traderyoda wrote:
> I have a SB Classic hooked to a Klipsch Promedia 2.1 setup. This has
> provided good quality sound for a long time but the amp in the subwoofer
> burned up. This is typical failure mode for the Promedia system. Rather
> that replace/repair the Klipsch amp I thought to replace
Could be the output capacitors have failed which causes volume loss.
Easy DIY fix if you search on the Forum for instructions.
Heuer's Profile: http://forums.slimdevices.com/member.php?userid=2543
View this thread: http://
10 matches
Mail list logo