spindoctor wrote:
> Please see attached logs:
> Any thoughts?
Hi everyone.
Would anyone be kind enough to take a look at these logs to point me in
the direction please?
spindoctor's Profile: http://forums.slim
Please see attached logs:
These are all with the Boom (wifi) not synced and switched off. Only
the ethernet attached SB3s are being used.
FYI MAC ending 77 is the Bedroom, 2B is Lounge and E3 is the Boom.
Server1.log
Boom disconnected
Lounge and Bedroom Synced
Maintain Sync OFF for both player
pippin wrote:
> To what interval have you set the maximum drift (also in the sync
> settings menu)? The default 10ms?
Defaults (as far as I am aware):
Player Start 0ms
Player Audio Delay 0ms
Min sync adjust. 10ms
network packet latency 2ms
-
bpa wrote:
> I haven't interpreted sync logs for a while but what sort of device is
> 00:04:20:1e:b1:e3 as it seems to be the one losing /gaining time causing
> the resync.
OK - that one is the Boom (which is wireless)
I have previously tried just syncing the two wired SB3's and the skips
still
bpa wrote:
> I haven't interpreted sync logs for a while but what sort of device is
> 00:04:20:1e:b1:e3 as it seems to be the one losing /gaining time causing
> the resync.
I don't have that info with me at the moment let me see if I can get
my girlfriend to drive the web console.
I wouldn'
garym wrote:
> where do you see the "maintain sync" option? in LMS > Settings? Which
> tab?
>From memory:
Select Settings / then select the player from the left hand drop down.
>From the right hand drop down select the Synchronize (sic) option
Then I think it's about the fourth option down, be
Thank you for your patience sorry for the delay in responding, my
internet went down etc etc.
OK, so I have some logs. Pretty much as soon as I enable the 'Maintain
Sync' option it starts to skip, but not with just enabling the sync of
the players (source and power) - although in this scenar
bpa wrote:
> I think you should leave everything at the system installation default.
Which brings us nicely back to the request in my first post - I don't
actually know what the default settings are.
I'm going to have to assume that the settings that I discovered from the
virtual machine insta
bpa wrote:
> I realise that but Softsqueze sync implementation is old and perhaps not
> up to date or fully featured and so the values you get may not be the
> correct/best ones for real hardware.
I had assumed that the sync settings to be part of the SBS, rather than
the player (soft or hard).
Mnyb wrote:
> How does it work with only the two wired players synced ? ( excluding
> anything wifi related )
Yeah, same. I wanted to eliminate wifi from the equation.
I appears that I can sync players and power without issue - I don't
bother with volume.
I only seem to get the problem when I
ghostrider wrote:
> I use the same sync settings you specified and my players, one wired -
> one wireless, sync without issue. If you can send seperate streams to
> each player without problems I would guess that both your home network
> and server are strong. On the audio tab for each player, if
bpa wrote:
> Using Softsqueeze to debug sync is pointless as Softsqueeze is known not
> to sync reliably. Only the hardware players can sync reliably.
Hi BPA. Thank you for your reply, but you misunderstand me. I installed
SqueezeServer and the two instances of SoftSqueeze on a virtual machine
ok - So I downloaded 7.6.1 and installed it on a virtual machine. This
I did purely to get to a defauilt installation of SqueezeServer.
I then also ran up two instances of SoftSqueeze
>From this I was able to get these default values:
Player Start 0ms
Player Audio Delay
This is my current setup:
Dell tower, Pentium 4 @ 3.06ghz, 2GB RAM.
Squeezebox Server Version: 7.6.1 (Yes, I know it's a couple of versions
behind, but I wanted to try and fix the issue that I'm about to describe
before upgrading)
Kitchen: Boom - wireless
Lounge: SB3 classic - ethernet via 100
bpa;584486 Wrote:
> Sounds like you turned on Repeat Current Song. The "Repeat" button is a
> 3 way option - Off, repeat current song, repeat playlist.
Such as basic error on my part - I can't believe I missed this....
Thank
same readings as it
was before I tried it downstairs.
Do I have a faulty Bedroom unit?
Are the wireless signal and network tests within expected tolerances?
Is there anyway I can factory reset the Bedroom player? Is this the
right course of
all of
this appears to have started at about the same time...
I'm thinking that SB server is screwed... what is the best way of
removing the server end software, re-installing and making it start
from scratch, if indeed that is the best course of action?
Many thanks for your continued inte
ot playing (but
saying it is playing BBC Radio 1) and I can hear the one upstairs
playing perfectly well.
Grrr.
--
spindoctor
spindoctor's Profile: http://forums.slimdevices.com/member.php?user
n a few of SBs for many
years, but this is really getting on my pip.
It does seem to mainly be one SB that displays the issue.
I'll take a look at the file types as per one of the first posts.
Thanks for all of your help so far.
Phil
x to the intermittent
radio issue.
Rgds Phil
--
spindoctor
spindoctor's Profile: http://forums.slimdevices.com/member.php?userid=9855
View this thread: http://forums.slimdevices.com/showthread.php?t=82526
_
l it kicks
back into life or turn off and back on again.
Many thanks for your help so far.
Rgds Phil
--
spindoctor
spindoctor's Profile: http://forums.slimdevices.com/member.php?userid=9855
View th
al value): at
/Slim/Networking/IO/Select.pm
line 149.
May not be related but it's clearly not liking something.
Many thanks, Phil
--
spindoctor
spindoctor's Profile: http://forums.slimdevices.com/member.php?user
22 matches
Mail list logo
