Thanks to some help from the support team at Slim Devices my problem is
solved and I have egg on my face.
Please go ahead and close this case.
After some digging the I've found that the root cause of the problem is
the ESET firewall software.
For reference, if anyone else encounters the pro
Calodoucas;320873 Wrote:
> Hi,
>
> I had exactly the same problems.
>
> I downgraded to 7.0.1 and experienced the 'no artists' issue. I've
> clean installed 7.0.2 - too early to say if all is OK, only
> re-installed late last night. Will report further when I check my
> system tonight.
I'm int
Hi,
I had exactly the same problems.
I downgraded to 7.0.1 and experienced the 'no artists' issue. I've
clean installed 7.0.2 - too early to say if all is OK, only
re-installed late last night. Will report further when I check my
system tonight.
--
Calodoucas
-
Phil Leigh;320689 Wrote:
> IMHO 7.01 is broken. You should go to 7.1 and get that working. Why did
> you downgrade?
I'd really prefer not to. I thought I had fixed most of the problems:
1) Reboot the PC
2) Rescan the library
3) Reboot the controller
During the library scan all was going well b
IMHO 7.01 is broken. You should go to 7.1 and get that working. Why did
you downgrade?
--
Phil Leigh
You want to see the signal path BEFORE it gets onto a CD/vinyl...it
ain't what you'd call minimal...SB3+Stontronics PSU - Altmann
JISCO/UPCI - TACT RCS 2.2X with Good Vibrations S/W - MF X-DAC
Hi All
I have recently downgraded from 7.1 (whatever Tuesday's build was) back
to 7.0.1 - 19705 and I'm encountering a number of problems:
1) If pause is selected from the controller or web interface, or if the
SB3 is switched off, a "connection failure" message is displayed on the
controller an
