Sounds like something is very wrong. I'd contact support or return it.
Why was there no remote from the seller?
There are retail demonstration/display SB3's that get sold as used
SB3's. These units are not upgradable or usable beyond a basic pre
programmed demonstration mode.
--
toby10
toby10;528752 Wrote:
Sounds like something is very wrong. I'd contact support or return it.
Why was there no remote from the seller?
There are retail demonstration/display SB3's that get sold as used
SB3's. These units are not upgradable or usable beyond a basic pre
programmed
toby10;528752 Wrote:
Sounds like something is very wrong. I'd contact support or return it.
Why was there no remote from the seller?
There are retail demonstration/display SB3's that get sold as used
SB3's. These units are not upgradable or usable beyond a basic pre
programmed
toby10;528326 Wrote:
Two ways:
1. (if player connected to server) SBS UI Settings Information
2. SB3 Settings Information SB3 FW Version
I try to reset the SBC,but DEBUG FIREWAREalso display. and I find the
SBC,some time no reply.(lost in the web page,player no find) .Your
player
QBIT;528295 Wrote:
How can I see the FW version?
Two ways:
1. (if player connected to server) SBS UI Settings Information
2. SB3 Settings Information SB3 FW Version
--
toby10
toby10's Profile:
QBIT;528067 Wrote:
Thanks you !My SB is two hand,so I don't have the original remote
control.
Do you have other way to resolve?
Press hold LEFT arrow to enter Setup, scroll to Current Settings,
scroll to Update Automatically = YES
Then arrow LEFT to exit Setup, scroll to Connect to SBS,
toby10;528115 Wrote:
Press hold LEFT arrow to enter Setup, scroll to Current Settings,
scroll to Update Automatically = YES
Then arrow LEFT to exit Setup, scroll to Connect to SBS, your FW should
now update when it connects to SBS.
The only catch is that I'm not certain this Setup
when i power on the Squeezebox V3,then it display DEBUG FIREWARE .Some
One know what this mean? and the reason.
--
QBIT
QBIT's Profile: http://forums.slimdevices.com/member.php?userid=37129
View this thread:
QBIT;527930 Wrote:
I have two question.
1.when i power on the Squeezebox V3,then it display DEBUG FIREWARE
.Some One know what this mean? and the reason.how can i repair?
2.the marmitek pc control can replace the origin remote control?
thank you!
Try to reset the SB3 to factory
Where did you get your SB?
You should be able to update it to a normal version by connecting it to
Squeezebox Server. If this doesn't prompt you to update, press and hold
the brightness key on the remote for 5 seconds.
--
andyg
andyg;527939 Wrote:
Where did you get your SB?
You should be able to update it to a normal version by connecting it to
Squeezebox Server. If this doesn't prompt you to update, press and hold
the brightness key on the remote for 5 seconds.
Thanks you !My SB is two hand,so I don't have the
flattermann;527934 Wrote:
Try to reset the SB3 to factory defaults by holding the + button on
the remote while powering up the SB3.
Thank you!
--
QBIT
QBIT's Profile:
12 matches
Mail list logo