I have a weird problem with the last SB V3 I got. First thing I noticed
was when my screensaver was on and the text was scrolling, the text
would sometimes pause for a few seconds, then "catch up" to where it
should have been. I placed it right next to my older SB and the older
one didn't have a
I've seen similar behavior when I was using Windows XP for my server.
The machine was also connected to my network via wireless. Both of my
squeezeboxes are wireless.
I've also seen this behavior if the signal strength is marginal (<
50%). When using mine on my deck connected to PC speakers (g
I had a similar experience when I briefly had a metal bucket placed
between my WAP and my SB3. Moved the bucket and performance was back
to normal.
My suggestion: test wired, then if wired is okay, look for wireless
interference/contention.
--
CatBus
--
Okay - router is in the basement so testing a problem that's occurring
sporadically will be a pain, but I'll give it a whirl. I am going to
try two things...
1) Set up an higher gain antenna on my router to boost the signal,
though not sure and communications back to the server will be
increased
I have had the same thing occur with one of my SB3's (altho honestly,
the other one doesn't get used as much, so it's possible it could have
the same problem). Am running SS 6.5 on XP machine and both of my
units are hardwired Cat 5e.
--
MeridianMan
Mine started this behaviour recently - yesterday it was really bad so I
forced a firmware update. It was fine after that but too soon to be sure
it was the fix.
--
lyteroptes
lyteroptes's Profile: http://forums.slimdevice
hi guys!
i had (sometimes still have) this problem too. in my case it turned out
to be a severely resource-starved computer running slimserver.
especially if it had to start swapping virtual memory to- and from
disk, i could sometimes wait for 20-30 sec.(!) for it to respond to the
remote control
