hi,
I try with ovs-vswitchd also but same error as i mention from controller
side,
./ovs-vswitchd
--certificate=/home/prashant/ovs1.9/openvswitch-1.9.0/ovs/bin/ctl-cert.pem
--private-key=/home/prashant/ovs1.9/openvswitch-1.9.0/ovs/bin/ctl-privkey.pem
--peer-ca-cert=/home/prashant/ovs1.9/openvswitch
Hi,
I am curios about SR-IOV with open vSwitch. So is it possible to use SR-IOV
with KVM＋OpenVSwitch?
Cheers
Ryo
Gurucharan Shetty :
>On Thu, Sep 19, 2013 at 6:59 PM, Jake G. wrote:
>> Thanks for the reply.
>>
>> I havent installed anything yet, because I am not sure what my NIC
>> configu
On Thu, Sep 19, 2013 at 6:59 PM, Jake G. wrote:
> Thanks for the reply.
>
> I havent installed anything yet, because I am not sure what my NIC
> configuration should be to work with openvswitch.
It can be the same as what you would do with linux bridge while running VMs.
> Right now my settings
Thanks for the reply.
I havent installed anything yet, because I am not sure what my NIC
configuration should be to work with openvswitch.
Right now my settings are:
eth0: 10.3.9.50/8 no gateway (management network-no internet)
eth1: 192.168.100.131/24 GW=192.168.100.254 (Internet access)
Shou
On Thu, Sep 19, 2013 at 3:01 AM, Jake G. wrote:
> Hi All,
>
> I am trying to find an easy to follow Install Guide for OpenvSwitch + KVM on
> CentOS 6.x, but havent been able to find one that is clear.
> Anyone have anyone good links for this?
If you already have installed KVM on Centos6.x and hav
Hi guys [+list],
You might find that you have unexpected behavior down the road with that
tactic.
I would perhaps suggest an approach where you set a value (using xapi) for
the
PIF's other-config, and then run your own script (perhaps on bootup) that
finds
PIF and does configuration based upon tha
On Thu, Sep 19, 2013 at 10:58 AM, Faisal Ali wrote:
> Given how many Vms any hypervisor can respectably service, even if one
> bridge is dedicated to VM (I know there not much use to this type of
> connectivity); even a hundered or few more bridges is unrealistic. So I
> guess we may not have to w
Given how many Vms any hypervisor can respectably service, even if one
bridge is dedicated to VM (I know there not much use to this type of
connectivity); even a hundered or few more bridges is unrealistic. So I
guess we may not have to worry too much about the limit.
Thanks for a quick assist She
On Thu, Sep 19, 2013 at 10:28 AM, Faisal Ali wrote:
> Hi,
>
> How many bridges can a openvswitch have. Is there a hard limit.
>From ovs-vswitchd man page:
ovs-vswitchd started through ovs-ctl(8) provides a
limit of 7500 file descriptors. The limits on the number of
On Thu, Sep 19, 2013 at 05:53:38PM +0530, nisha goyal wrote:
> I am working on a project where we create multiple vms on a host machine.
> There are multiple hosts of this kind. These hosts are connected to a
> single LAN and the VMs are created using KVM. Qemu and libvirt are used
> alongwith. The
Hi,
How many bridges can a openvswitch have. Is there a hard limit.
Thanks
Faisal Ali
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
On Thu, Sep 19, 2013 at 5:23 AM, nisha goyal wrote:
> Hi all,
>
> I am working on a project where we create multiple vms on a host machine.
> There are multiple hosts of this kind. These hosts are connected to a single
> LAN and the VMs are created using KVM. Qemu and libvirt are used alongwith.
>
On Thu, Sep 19, 2013 at 5:09 AM, Prashant Chougule
wrote:
> hello,
>
> I am trying to connect ovs with floodlight controller over ssl but
> i am not able to connect,
> i have created keys for the controller and for switch using ovs-pki and try
> to connect using ovs-vsctl
> ./ovs-vsctl --
Hi all,
I am working on a project where we create multiple vms on a host machine.
There are multiple hosts of this kind. These hosts are connected to a
single LAN and the VMs are created using KVM. Qemu and libvirt are used
alongwith. There is a requirement where I need to create multiple VLANs
su
hello,
I am trying to connect ovs with floodlight controller over ssl but
i am not able to connect,
i have created keys for the controller and for switch using ovs-pki and try
to connect using ovs-vsctl
./ovs-vsctl --certificate=ctl-cert.pem --private-key=ctl-privkey.pem
--peer-ca-cert=..
Hi All,
I am trying to find an easy to follow Install Guide for OpenvSwitch + KVM on
CentOS 6.x, but havent been able to find one that is clear.
Anyone have anyone good links for this?
My main issue is what should my initial NIC setttings be before I install
anything? Below are my NIC details:
16 matches
Mail list logo
