Hello list,
I am trying to get USRP N210 running. I experience a problem when I connect
it to my computer. I see only B and F LEDs on, the Ethernet LEDs are shut
down after about one second of switching on USRP. mii-tools eth0 outputs
1000 MBit, half duplex, no link. Wiresharks shows no packets
Hello every one,
I have just started working with GNU Radio Software and USRP2 motherboard.
My ethernet card in the host PC doesn't support Gigabit so I thought to
connect the USRP2 motherboard through a gigabit switch. My question is:
should it work in a normal case?
I think the switch can
Harald Welte lafo...@gnumonks.org writes:
I'm responding to this very old (November 2005) post:
On Sun, Nov 13, 2005 at 10:11:57PM -0500, Krzysztof Kamieniecki wrote:
README http://www.kamieniecki.com/krys/gps/README
Archive http://www.kamieniecki.com/krys/gps/grkkgps-0.1.tar.gz
The link
Hello,
in dsp_core_rx.v, what would be the best place to tap the samples for
working at 100MS? Currently, I'm using i_cordic and q_cordic (rounded by
something like round_reg #(.bits_in(24),.bits_out(16))
round_isamplefull
(.clk(clk),.in(i_cordic),.out(i_sample_full_scaled))), but the block
Gregor,
I am curious - what are you going to do with samples ? - store on in RAM or
send them somewhere else ?
Unfortunately, I have no clue about the question.
BR/
Per
From: usrp-users-boun...@lists.ettus.com [usrp-users-boun...@lists.ettus.com]
on
Hi everyone, im a student from the ETS of Montreal, so excuse my english plz.
I have to recompile the USRP2 fpga project because i will use the mictor conn
to talk with another fpga. First, I tried to compile the original project, the
one in the directory
Hi all,
I want to send and receive data between two different USRP1 (both directly
connected) using the GMSK modulation at 30 MHz. I am using the GMSK mode
implemented in GNU Radio. For transmission, I am using the LFTX daughterboard
and for reception, the BasicRX.
As a result, when I
On Tue, 2010-12-14 at 11:57 +0100, Vadim Uvin wrote:
Hello list,
I am trying to get USRP N210 running. I experience a problem when I
connect it to my computer. I see only B and F LEDs on, the Ethernet
LEDs are shut down after about one second of switching on USRP.
mii-tools eth0 outputs
On Tue, 2010-12-14 at 08:21 -0800, nadia yoza wrote:
Hi all,
I want to send and receive data between two different USRP1 (both
directly connected) using the GMSK modulation at 30 MHz. I am using
the GMSK mode implemented in GNU Radio. For transmission, I am using
the LFTX daughterboard and
On Mon, Dec 13, 2010 at 6:53 PM, Matt Ettus m...@ettus.com wrote:
We have updated the datasheet with a block diagram. You can find it on our
ordering page or here:
http://www.ettus.com/downloads/USRP_E100_Series_temporary_datasheet.pdf
Matt
Thanks Matt - that's very helpful. Interesting
I built a gnuradio-3.3.0 source RPM for F14. You can download it here
http://www.umich.edu/~jagregor/gnuradio-3.3.0-1.src.rpm
Use yum-builddep gnuradio to install all of the build dependencies.
Since I haven't set up my packages to be signed, I'm not providing
binaries. I sent this to the
On 12/14/2010 03:07 AM, Eduardo Lloret Fuentes wrote:
Hello every one,
I have just started working with GNU Radio Software and USRP2 motherboard.
My ethernet card in the host PC doesn't support Gigabit so I thought to
connect the USRP2 motherboard through a gigabit switch. My question
On 12/14/2010 08:34 AM, Douglas Geiger wrote:
Thanks Matt - that's very helpful. Interesting in that the Gumstix
configures the FPGA. I see the fpga-downloader program in
host/lib/usrp/usrp_e100 that does the work, and presumably with the
stock linux distribution you're shipping it has the
Hello,
our institute owns 4 USRP2. Three of them can be pinged.
The 4th one cannot.
It's neither possible to use it with UHD firmware and FPGA image.
If I try uhd_find_device no device is found.
The firmware and the FPGA image on the SD card is working fine.
I checked this using one of my other
On 12/14/2010 09:39 AM, Tobias Schmid wrote:
Hello,
our institute owns 4 USRP2. Three of them can be pinged.
The 4th one cannot.
It's neither possible to use it with UHD firmware and FPGA image.
If I try uhd_find_device no device is found.
The firmware and the FPGA image on the SD card
Hi,
is the USRP2 starting at all, with LEDs on and the fan running? Was it running
before? We had the problem that the fuse on the USRP2 was blown. Its rather
easy to replace once you identified it as the problem.
Matthias
Am 14.12.2010 um 18:39 schrieb Tobias Schmid:
Hello,
our
Hello Matthias,
all thos works. The USRP even works with the common USRP images. But not
with UHD.
Thanks,
Tobias
Am 14.12.2010 18:54, schrieb Matthias Wilhelm:
Hi,
is the USRP2 starting at all, with LEDs on and the fan running? Was it running
before? We had the problem that the fuse on
Matt,
Since the OMAP has a GPU incorporated does that mean that we could use
it for processing? Is there a CUDA equivalent for this type of GPU?
Thanks for any guidance,
Scott
Matt Ettus wrote:
On 12/12/2010 07:43 PM, Andrew Ge wrote:
Josh or Matt,
Would you please tell me which TI
On Tue, Dec 14, 2010 at 1:37 PM, Scott Johnston
scott.johns...@ll.mit.edu wrote:
Matt,
Since the OMAP has a GPU incorporated does that mean that we could use it
for processing? Is there a CUDA equivalent for this type of GPU?
Thanks for any guidance,
Scott
--
Scott Johnston
MIT
On Tue, Dec 14, 2010 at 12:32 PM, Matt Ettus m...@ettus.com wrote:
We have based our distro on Angstron and OpenEmbedded. The vast majority of
packages come from the standard repositories, and we have our UHD and kernel
driver work added to that.
Ok, thanks.
There is no aeMB so there is
On 12/14/2010 01:47 PM, Douglas Geiger wrote:
On Tue, Dec 14, 2010 at 12:32 PM, Matt Ettusm...@ettus.com wrote:
We have based our distro on Angstron and OpenEmbedded. The vast majority of
packages come from the standard repositories, and we have our UHD and kernel
driver work added to that.
On Dec 14, 2010, at 10:47 PM, Douglas Geiger wrote:
One more question - about cabling this time. Does the UE100-KIT come
with any adapters to assist with plugging my standard sized USB
devices (keyboard/mouse, flash drive, etc.) into the various USB ports
on the front panel? If not, can you
On 12/14/2010 10:45 AM, Douglas Geiger wrote:
On Tue, Dec 14, 2010 at 1:37 PM, Scott Johnston
scott.johns...@ll.mit.edu wrote:
Matt,
Since the OMAP has a GPU incorporated does that mean that we could use it
for processing? Is there a CUDA equivalent for this type of GPU?
Scott,
I believe
On Dec 14, 2010, at 11:14 PM, Matt Ettus wrote:
Since the OMAP has a GPU incorporated does that mean that we could use it
for processing? Is there a CUDA equivalent for this type of GPU?
Doug has it pretty correct here. This is one of those areas I would call
theoretically possible,
Elvis-
On Dec 14, 2010, at 11:14 PM, Matt Ettus wrote:
Since the OMAP has a GPU incorporated does that mean that we could use it
for processing? Is there a CUDA equivalent for this type of GPU?
Doug has it pretty correct here. This is one of those areas I would call
theoretically
On 12/14/2010 10:47 AM, Douglas Geiger wrote:
There is no aeMB so there is no firmware in the sense that we have on the
USRP2. The OMAP fulfills that role because it has direct low-latency bus
access to the FPGA. The FPGA can directly interrupt the CPU as well.
Interesting - those interrupts
Hi
I'm attempting to expand on a custom FPGA build I've been working on. The
function I've implemented is to write a set of data at run time to a RAM
created on the USRP FPGA. I used the usrp_tx chain functions (modified buffer
module) to achieve this.
I've successfully managed to load the
Thanks for your answer Thomas!
Our observations shows also that the usrp2 doesn't drop any samples
when an underrun occur. If we drop samples at the host, can we get a
continous stream of sample at 25Msamp/s that is synchronous? What is
your maximum continous bandwidth?
Underflows occur
On Tue, Dec 14, 2010 at 6:34 PM, Josh Blum j...@joshknows.com wrote:
Our observations shows also that the usrp2 doesn't drop any samples
when an underrun occur. If we drop samples at the host, can we get a
continous stream of sample at 25Msamp/s that is synchronous? What is
your maximum
29 matches
Mail list logo
